18.4 Joints and Skeletal Movement

Mary Ann Clark; Jung Choi; and Matthew Douglas

Learning Objectives

By the end of this section, you will be able to do the following:

  • Classify the different types of joints on the basis of structure
  • Explain the role of joints in skeletal movement

The point at which two or more bones meet is called a joint, or articulation. Joints are responsible for movement, such as the movement of limbs, and stability, such as the stability found in the bones of the skull.

Classification of Joints on the Basis of Structure

There are two ways to classify joints: on the basis of their structure or on the basis of their function. The structural classification divides joints into bony, fibrous, cartilaginous, and synovial joints depending on the material composing the joint and the presence or absence of a cavity in the joint.

Fibrous Joints

The bones of fibrous joints are held together by fibrous connective tissue. There is no cavity, or space, present between the bones and so most fibrous joints do not move at all, or are only capable of minor movements. There are three types of fibrous joints: sutures, syndesmoses, and gomphoses. Sutures are found only in the skull and possess short fibers of connective tissue that hold the skull bones tightly in place ((Figure 18.23)).


Illustration shows sutures that knit the back part of the skull together with the front and lower parts. These appear as lines, or cracks, between the bones of the skull.

Figure 18.23: Sutures are fibrous joints found only in the skull.

 

Syndesmoses are joints in which the bones are connected by a band of connective tissue, allowing for more movement than in a suture. An example of a syndesmosis is the joint of the tibia and fibula in the ankle. The amount of movement in these types of joints is determined by the length of the connective tissue fibers. Gomphoses occur between teeth and their sockets; the term refers to the way the tooth fits into the socket like a peg ((Figure 18.24)). The tooth is connected to the socket by a connective tissue referred to as the periodontal ligament.

Illustration shows a gomphosis connecting a tooth to the jaw. The gomphoses have a porous appearance.

Figure 18.24: Gomphoses are fibrous joints between the teeth and their sockets. (credit: modification of work by Gray’s Anatomy)

Cartilaginous Joints

Cartilaginous joints are joints in which the bones are connected by cartilage. There are two types of cartilaginous joints: synchondroses and symphyses. In a synchondrosis, the bones are joined by hyaline cartilage. Synchondroses are found in the epiphyseal plates of growing bones in children. In symphyses, hyaline cartilage covers the end of the bone but the connection between bones occurs through fibrocartilage. Symphyses are found at the joints between vertebrae. Either type of cartilaginous joint allows for very little movement.

Synovial Joints

Synovial joints are the only joints that have a space between the adjoining bones ((Figure 18.25)). This space is referred to as the synovial (or joint) cavity and is filled with synovial fluid. Synovial fluid lubricates the joint, reducing friction between the bones and allowing for greater movement. The ends of the bones are covered with articular cartilage, a hyaline cartilage, and the entire joint is surrounded by an articular capsule composed of connective tissue that allows movement of the joint while resisting dislocation. Articular capsules may also possess ligaments that hold the bones together. Synovial joints are capable of the greatest movement of the three structural joint types; however, the more mobile a joint, the weaker the joint. Knees, elbows, and shoulders are examples of synovial joints.

Illustration shows a synovial joint between two bones. An I beam shaped synovial cavity exists between the bones, and articular cartilage wraps around the tips of the bones. The joint cavity contains synovial fluid. Ligaments connect the two bones together.

Figure 18.25: Synovial joints are the only joints that have a space or “synovial cavity” in the joint.

Classification of Joints on the Basis of Function

The functional classification divides joints into three categories: synarthroses, amphiarthroses, and diarthroses. A synarthrosis is a joint that is immovable. This includes sutures, gomphoses, and synchondroses. Amphiarthroses are joints that allow slight movement, including syndesmoses and symphyses. Diarthroses are joints that allow for free movement of the joint, as in synovial joints.

Movement at Synovial Joints

The wide range of movement allowed by synovial joints produces different types of movements. The movement of synovial joints can be classified as one of four different types: gliding, angular, rotational, or special movement.

Gliding Movement

Gliding movements occur as relatively flat bone surfaces move past each other. Gliding movements produce very little rotation or angular movement of the bones. The joints of the carpal and tarsal bones are examples of joints that produce gliding movements.

Angular Movement

Angular movements are produced when the angle between the bones of a joint changes. There are several different types of angular movements, including flexion, extension, hyperextension, abduction, adduction, and circumduction. Flexion, or bending, occurs when the angle between the bones decreases. Moving the forearm upward at the elbow or moving the wrist to move the hand toward the forearm are examples of flexion. Extension is the opposite of flexion in that the angle between the bones of a joint increases. Straightening a limb after flexion is an example of extension. Extension past the regular anatomical position is referred to as hyperextension. This includes moving the neck back to look upward, or bending the wrist so that the hand moves away from the forearm.

Abduction occurs when a bone moves away from the midline of the body. Examples of abduction are moving the arms or legs laterally to lift them straight out to the side. Adduction is the movement of a bone toward the midline of the body. Movement of the limbs inward after abduction is an example of adduction. Circumduction is the movement of a limb in a circular motion, as in moving the arm in a circular motion.

Rotational Movement

Rotational movement is the movement of a bone as it rotates around its longitudinal axis. Rotation can be toward the midline of the body, which is referred to as medial rotation, or away from the midline of the body, which is referred to as lateral rotation. Movement of the head from side to side is an example of rotation.

Special Movements

Some movements that cannot be classified as gliding, angular, or rotational are called special movements. Inversion involves the soles of the feet moving inward, toward the midline of the body. Eversion is the opposite of inversion, movement of the sole of the foot outward, away from the midline of the body. Protraction is the anterior movement of a bone in the horizontal plane. Retraction occurs as a joint moves back into position after protraction. Protraction and retraction can be seen in the movement of the mandible as the jaw is thrust outwards and then back inwards. Elevation is the movement of a bone upward, such as when the shoulders are shrugged, lifting the scapulae. Depression is the opposite of elevation—movement downward of a bone, such as after the shoulders are shrugged and the scapulae return to their normal position from an elevated position. Dorsiflexion is a bending at the ankle such that the toes are lifted toward the knee. Plantar flexion is a bending at the ankle when the heel is lifted, such as when standing on the toes. Supination is the movement of the radius and ulna bones of the forearm so that the palm faces forward. Pronation is the opposite movement, in which the palm faces backward. Opposition is the movement of the thumb toward the fingers of the same hand, making it possible to grasp and hold objects.

Types of Synovial Joints

Synovial joints are further classified into six different categories on the basis of the shape and structure of the joint. The shape of the joint affects the type of movement permitted by the joint ((Figure 18.26)). These joints can be described as planar, hinge, pivot, condyloid, saddle, or ball-and-socket joints.

Illustration shows joints of the body. The neck is a pivot joint that allows rotation. The hip is a ball-and-socket joint that allows a swiveling movement. The elbow is a hinge joint that allows movement in one direction. The wrist has a saddle joint to allow back-and forth-movement, and a condyloid joint to allow up-and-down movement. The tarsals of the foot have a plane joint that allows back-and-forth movement.

Figure 18.26: Different types of joints allow different types of movement. Planar, hinge, pivot, condyloid, saddle, and ball-and-socket are all types of synovial joints.

Planar Joints

Planar joints have bones with articulating surfaces that are flat or slightly curved faces. These joints allow for gliding movements, and so the joints are sometimes referred to as gliding joints. The range of motion is limited in these joints and does not involve rotation. Planar joints are found in the carpal bones in the hand and the tarsal bones of the foot, as well as between vertebrae ((Figure 18.27)).

Photo shows a human hand skeleton. The radius and ulna of the forearm connect to several small, knobby bones in the wrist called carpals. Carpals, in turn, connect to bones in the wrist.

Figure 18.27: The joints of the carpal bones in the wrist are examples of planar joints. (credit: modification of work by Brian C. Goss)

Hinge Joints

In hinge joints, the slightly rounded end of one bone fits into the slightly hollow end of the other bone. In this way, one bone moves while the other remains stationary, like the hinge of a door. The elbow is an example of a hinge joint ((Figure 18.28)). The knee is sometimes classified as a modified hinge joint.

Photo shows the skeleton of a human arm. The ulna of the lower arm fits in the groove of the humerus, forming the hinge-like elbow joint.

Figure 18.28: The elbow joint, where the radius articulates with the humerus, is an example of a hinge joint. (credit: modification of work by Brian C. Goss)

Pivot Joints

Pivot joints consist of the rounded end of one bone fitting into a ring formed by the other bone. This structure allows rotational movement, as the rounded bone moves around its own axis. An example of a pivot joint is the joint of the first and second vertebrae of the neck that allows the head to move back and forth ((Figure 18.29)). The joint of the wrist that allows the palm of the hand to be turned up and down is also a pivot joint.

Illustration shows a human skull twisting left and right on the neck in a pivot-like motion.

Figure 18.29: The joint in the neck that allows the head to move back and forth is an example of a pivot joint.

Condyloid Joints

Condyloid joints consist of an oval-shaped end of one bone fitting into a similarly oval-shaped hollow of another bone ((Figure 18.30)). This is also sometimes called an ellipsoidal joint. This type of joint allows angular movement along two axes, as seen in the joints of the wrist and fingers, which can move both side to side and up and down.

Illustration shows the metacarpophalangeal joint that joins the metacarpal of the hand to a finger.

Figure 18.30: The metacarpophalangeal joints in the finger are examples of condyloid joints. (credit: modification of work by Gray’s Anatomy)

Saddle Joints

Saddle joints are so named because the ends of each bone resemble a saddle, with concave and convex portions that fit together. Saddle joints allow angular movements similar to condyloid joints but with a greater range of motion. An example of a saddle joint is the thumb joint, which can move back and forth and up and down, but more freely than the wrist or fingers ((Figure 18.31)).

Photo shows the carpometacarpal joint that connects the metacarpal of the thumb to the trapezium of the wrist. Each bone is saddle-shaped at the end.

Figure 18.31: The carpometacarpal joints in the thumb are examples of saddle joints. (credit: modification of work by Brian C. Goss)

Ball-and-Socket Joints

Ball-and-socket joints possess a rounded, ball-like end of one bone fitting into a cuplike socket of another bone. This organization allows the greatest range of motion, as all movement types are possible in all directions. Examples of ball-and-socket joints are the shoulder and hip joints ((Figure 18.32)).

Illustration shows that the ball-shaped end of the humerus fits into the socket in the shoulder joint.

Figure 18.32: The shoulder joint is an example of a ball-and-socket joint.
Link to Learning

Watch this animation showing the six types of synovial joints.

Career Connection

Rheumatologist
Rheumatologists are medical doctors who specialize in the diagnosis and treatment of disorders of the joints, muscles, and bones. They diagnose and treat diseases such as arthritis, musculoskeletal disorders, osteoporosis, and autoimmune diseases such as ankylosing spondylitis and rheumatoid arthritis.

Rheumatoid arthritis (RA) is an inflammatory disorder that primarily affects the synovial joints of the hands, feet, and cervical spine. Affected joints become swollen, stiff, and painful. Although it is known that RA is an autoimmune disease in which the body’s immune system mistakenly attacks healthy tissue, the cause of RA remains unknown. Immune cells from the blood enter joints and the synovium causing cartilage breakdown, swelling, and inflammation of the joint lining. Breakdown of cartilage causes bones to rub against each other causing pain. RA is more common in women than men and the age of onset is usually 40–50 years of age.

Rheumatologists can diagnose RA on the basis of symptoms such as joint inflammation and pain, X-ray and MRI imaging, and blood tests. Arthrography is a type of medical imaging of joints that uses a contrast agent, such as a dye, that is opaque to X-rays. This allows the soft tissue structures of joints—such as cartilage, tendons, and ligaments—to be visualized. An arthrogram differs from a regular X-ray by showing the surface of soft tissues lining the joint in addition to joint bones. An arthrogram allows early degenerative changes in joint cartilage to be detected before bones become affected.

There is currently no cure for RA; however, rheumatologists have a number of treatment options available. Early stages can be treated with rest of the affected joints by using a cane or by using joint splints that minimize inflammation. When inflammation has decreased, exercise can be used to strengthen the muscles that surround the joint and to maintain joint flexibility. If joint damage is more extensive, medications can be used to relieve pain and decrease inflammation. Anti-inflammatory drugs such as aspirin, topical pain relievers, and corticosteroid injections may be used. Surgery may be required in cases in which joint damage is severe.

Section Summary

The structural classification of joints divides them into bony, fibrous, cartilaginous, and synovial joints. The bones of fibrous joints are held together by fibrous connective tissue; the three types of fibrous joints are sutures, syndesomes, and gomphoses. Cartilaginous joints are joints in which the bones are connected by cartilage; the two types of cartilaginous joints are synchondroses and symphyses. Synovial joints are joints that have a space between the adjoining bones. The functional classification divides joints into three categories: synarthroses, amphiarthroses, and diarthroses. The movement of synovial joints can be classified as one of four different types: gliding, angular, rotational, or special movement. Gliding movements occur as relatively flat bone surfaces move past each other. Angular movements are produced when the angle between the bones of a joint changes. Rotational movement is the movement of a bone as it rotates around its own longitudinal axis. Special movements include inversion, eversion, protraction, retraction, elevation, depression, dorsiflexion, plantar flexion, supination, pronation, and opposition. Synovial joints are also classified into six different categories on the basis of the shape and structure of the joint: planar, hinge, pivot, condyloid, saddle, and ball-and-socket.

Review Questions

Critical Thinking Questions

  1. What movements occur at the hip joint and knees as you bend down to touch your toes
    • The hip joint is flexed and the knees are extended.
  2. What movement(s) occur(s) at the scapulae when you shrug your shoulders?
    • Elevation is the movement of a bone upward, such as when the shoulders are shrugged, lifting the scapulae. Depression is the downward movement of a bone, such as after the shoulders are shrugged and the scapulae return to their normal position from an elevated position.
  3. Describe the joints and motions involved in taking a step forward if a person is initially standing still. Assume the person holds his foot at the same angle throughout the motion.
    • Taking a step would require bending the knee (modified hinge joint) and moving the leg in the hip (ball and socket joint) since the motion of the foot is excluded. As the foot comes off the ground in the step, the hip joint is going to move the femur in a protracted motion and the knee will flex the shin toward the thigh. As the foot lands, the knee extends the leg and the hip retracts the femur.

 

Glossary

abduction
when a bone moves away from the midline of the body
adduction
movement of the limbs inward after abduction
amphiarthrosis
joint that allows slight movement; includes syndesmoses and symphyses
angular movement
produced when the angle between the bones of a joint changes
ball-and-socket joint
joint with a rounded, ball-like end of one bone fitting into a cuplike socket of another bone
cartilaginous joint
joint in which the bones are connected by cartilage
circumduction
movement of a limb in a circular motion
condyloid joint
oval-shaped end of one bone fitting into a similarly oval-shaped hollow of another bone
depression
movement downward of a bone, such as after the shoulders are shrugged and the scapulae return to their normal position from an elevated position; opposite of elevation
diarthrosis
joint that allows for free movement of the joint; found in synovial joints
dorsiflexion
bending at the ankle such that the toes are lifted toward the knee
elevation
movement of a bone upward, such as when the shoulders are shrugged, lifting the scapulae
eversion
movement of the sole of the foot outward, away from the midline of the body; opposite of inversion
extension
movement in which the angle between the bones of a joint increases; opposite of flexion
fibrous joint
joint held together by fibrous connective tissue
flexion
movement in which the angle between the bones decreases; opposite of extension
gliding movement
when relatively flat bone surfaces move past each other
gomphosis
the joint in which the tooth fits into the socket like a peg
hinge joint
slightly rounded end of one bone fits into the slightly hollow end of the other bone
hyperextension
extension past the regular anatomical position
inversion
soles of the feet moving inward, toward the midline of the body
joint
point at which two or more bones meet
lateral rotation
rotation away from the midline of the body
medial rotation
rotation toward the midline of the body
opposition
movement of the thumb toward the fingers of the same hand, making it possible to grasp and hold objects
plantar flexion
bending at the ankle such that the heel is lifted, such as when standing on the toes
planar joint
joint with bones whose articulating surfaces are flat
pivot joint
joint with the rounded end of one bone fitting into a ring formed by the other bone
pronation
movement in which the palm faces backward
protraction
anterior movement of a bone in the horizontal plane
retraction
movement in which a joint moves back into position after protraction
rotational movement
movement of a bone as it rotates around its own longitudinal axis
saddle joint
joint with concave and convex portions that fit together; named because the ends of each bone resemble a saddle
supination
movement of the radius and ulna bones of the forearm so that the palm faces forward
suture
short fiber of connective tissue that holds the skull bones tightly in place; found only in the skull
synarthrosis
joint that is immovable
symphysis
hyaline cartilage covers the end of the bone, but the connection between bones occurs through fibrocartilage; symphyses are found at the joints between vertebrae
synchondrosis
bones joined by hyaline cartilage; synchondroses are found in the epiphyseal plates of growing bones in children
syndesmosis
joint in which the bones are connected by a band of connective tissue, allowing for more movement than in a suture
synovial joint
only joint that has a space between the adjoining bones

Chapter 38 in OpenStax Concepts of Biology 2e

License

Icon for the Creative Commons Attribution 4.0 International License

NSCC Concepts of Biology II BIOL 1047 Copyright © 2022 by Mary Ann Clark; Jung Choi; and Matthew Douglas is licensed under a Creative Commons Attribution 4.0 International License, except where otherwise noted.

Share This Book