Introductory Chemistry – 1st Canadian / NSCC Edition

Introductory Chemistry – 1st Canadian / NSCC Edition

Adapted by NSCC

David W. Ball and Jessie A. Key

NSCC

Halifax, Nova Scotia

Introductory Chemistry – 1st Canadian / NSCC Edition by David W. Ball and Jessie A. Key is an adapted version of the open textbook Introductory Chemistry – 1st Canadian and is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License, except where otherwise noted.

Contents

About the book

Unit 1: Introduction to Chemistry

Chapter 1: What is Chemistry

1.2 Some Basic Definitions

1.3 Chemistry as a Science

Chapter 2. Measurements

2.1 Expressing Numbers

2.2 Significant Figures

2.3 Converting Units

2.4 Other Units: Temperature and Density

2.5 Expressing Units

2.6 End-of-Chapter Material

Unit 2 Foundations of Chemistry

Chapter 3. Atoms, Molecules, and Ions

3.1 Atomic Theory

3.2 Molecules and Chemical Nomenclature

3.3 Masses of Atoms and Molecules

3.4 Ions and Ionic Compounds

3.5 Acids

3.6 End-of-Chapter Material

Chapter 4. Electronic Structure

4.1 Quantum Numbers for Electrons

4.2 Organization of Electrons in Atoms

4.3 Light

4.4 Periodic Trends

4.5 Electronic Structure and the Periodic Table

4.6 End-of-Chapter Material

Unit 3 Reactions & Equations

Chapter 5. Chemical Reactions and Equations

5.1 The Chemical Equation

5.2 Types of Chemical Reactions: Single- and Double-Displacement Reactions

5.3 Ionic Equations: A Closer Look

5.4 Composition, Decomposition, and Combustion Reactions

5.5 Neutralization Reactions

5.6 Oxidation-Reduction Reactions

5.7 End-of-Chapter Material

Unit 4 Stoichiometry

Chapter 6. Stoichiometry and the Mole

6.1 Stoichiometry

6.2 The Mole

6.3 The Mole in Chemical Reactions

6.4 Mole-Mass and Mass-Mass Calculations

6.5 Limiting Reagents

6.6 Yields

6.7 End-of-Chapter Material

Unit 5 Gases

Chapter 7. Gases

7.1 Pressure

7.2 Gas Laws

7.3 Other Gas Laws

7.4 The Ideal Gas Law and Some Applications

7.5 Gas Mixtures

7.6 Kinetic Molecular Theory of Gases

7.7 Molecular Effusion and Diffusion

7.8 Real Gases

7.9 End-of-Chapter Material

Unit 6 Energy & Thermodynamics

Chapter 8. Energy and Chemistry

8.1 Energy

8.2 Work and Heat

8.3 Enthalpy and Chemical Reactions

8.4 Stoichiometry Calculations Using Enthalpy

8.5 Hess’s Law

8.6 Formation Reactions

8.9 End-of-Chapter Material

Chapter 9. Chemical Thermodynamics

9.1 Spontaneous Change

9.2 Entropy and the Second Law of Thermodynamics

9.3 Measuring Entropy and Entropy Changes

9.4 Gibbs Free Energy

9.5 Spontaneity: Free Energy and Temperature

9.6 End-of-Chapter Material

Unit 7 Chemical Bonds

Chapter 10. Chemical Bonds

10.1 Lewis Electron Dot Diagrams

10.2 Electron Transfer: Ionic Bonds

10.3 Covalent Bonds

10.4 Other Aspects of Covalent Bonds

10.5 Violations of the Octet Rule

10.6 Molecular Shapes and Polarity

10.7 Valence Bond Theory and Hybrid Orbitals

10.8 End-of-Chapter Material

Unit 8 Solids, Liquids & Solutions

Chapter 11. Solids and Liquids

11.1 Intermolecular Forces

11.2 Phase Transitions: Melting, Boiling, and Subliming

11.3 Properties of Liquids

11.4 Solids

11.5 End-of-Chapter Material

Chapter 12. Solutions

12.1 Some Definitions

12.2 Quantitative Units of Concentration

12.3 Dilutions and Concentrations

12.4 Concentrations as Conversion Factors

12.5 Colligative Properties of Solutions

12.6 Colligative Properties of Ionic Solutes

12.7 End-of-Chapter Material

Unit 9 Acids and Bases

Chapter 13. Acids and Bases

13.1 Arrhenius Acids and Bases

13.2 Brønsted-Lowry Acids and Bases

13.3 Acid-Base Titrations

13.4 Strong and Weak Acids and Bases and Their Salts

13.5 Autoionization of Water

13.6 The pH Scale

13.7 Buffers

13.8 End-of-Chapter Material

Unit 10 Equilibrium

Chapter 14. Chemical Equilibrium

14.1 Chemical Equilibrium

14.2 The Equilibrium Constant

14.3 Shifting Equilibria: Le Chatelier’s Principle

14.4 Calculating Equilibrium Constant Values

14.5 Some Special Types of Equilibria

14.6 End-of-Chapter Material

Chapter 15. Kinetics

15.1 Factors that Affect the Rate of Reactions

15.2 Reaction Rates

15.3 Rate Laws

15.4 Concentration–Time Relationships: Integrated Rate Laws

15.5 Activation Energy and the Arrhenius Equation

15.6 Reaction Mechanisms

15.7 Catalysis

15.8 End-of-Chapter Material

Unit 11 Oxidation & Reduction

Chapter 16. Oxidation and Reduction

16.1 Oxidation-Reduction Reactions

16.2 Balancing Redox Reactions

16.3 Applications of Redox Reactions: Voltaic Cells

16.4 Electrolysis

16.5 End-of-Chapter Material

Unit 12 Organic Chemistry

Chapter 17. Organic Chemistry

17.1 Hydrocarbons

17.2 Branched Hydrocarbons

17.3 Alkyl Halides and Alcohols

17.4 Other Oxygen-Containing Functional Groups

17.5 Other Functional Groups

17.6 Polymers

17.7 End-of-Chapter Material

Appendix: Periodic Table of the Elements

Appendix: Selected Acid Dissociation Constants at 25°C

Appendix: Solubility Constants for Compounds at 25°C

Appendix: Standard Thermodynamic Quantities for Chemical Substances at 25°C

Appendix: Standard Reduction Potentials by Value

Glossary

Versioning History

About the book

Introductory Chemistry- 1st Canadian / NSCC Edition is an adaptation of Introductory Chemistry- 1st Canadian Edition. The chapters have been reordered, renumbered, and placed into units.

Introductory Chemistry- 1st Canadian Edition was adapted by Jessie A. Key from David Ball’s textbook Introductory Chemistry with support from BCcampus Open Education. For information about what was changed in this adaptation, refer to the Copyright statement at the bottom of the home page.

BCcampus Open Education began in 2012 as the B.C. Open Textbook Project with the goal of making post-secondary education in British Columbia more accessible by reducing student costs through the use of openly licenced textbooks and other OER. BCcampus supports the post-secondary institutions of British Columbia as they adapt and evolve their teaching and learning practices to enable powerful learning opportunities for the students of B.C. BCcampus Open Education is funded by the British Columbia Ministry of Advanced Education, Skills & Training, and the Hewlett Foundation.

Open textbooks are open educational resources (OER) created and shared in ways so that more people have access to them. This is a different model than traditionally copyrighted materials. OER are defined as teaching, learning, and research resources that reside in the public domain or have been released under an intellectual property license that permits their free use and re-purposing by others.2 Our open textbooks are openly licensed using a Creative Commons licence, and are offered in various e-book formats free of charge, or as printed books that are available at cost. For more information about this project, see the BCcampus Open Education website. If you are an instructor who is using this book for a course, please fill out our Adoption of an Open Textbook form.

"Open Educational Resources,"

, https://hewlett.org/strategy/open-educational-resources/ (accessed September 27, 2018).

PART I

Unit 1: Introduction to Chemistry

Chapter 1

Chapter 1: What is Chemistry

Introduction

If you are reading these words, you are likely starting a chemistry course. Get ready for a fantastic journey through a world of wonder, delight, and knowledge. One of the themes of this book is “chemistry is everywhere,” and indeed it is; you would not be alive if it weren’t for chemistry because your body is a big chemical machine. If you don’t believe it, don’t worry. Every chapter in this book contains examples that will show you how chemistry is, in fact, everywhere. So enjoy the ride—and enjoy chemistry.

What is chemistry? Simply put, chemistry is the study of the interactions of matter with other matter and with energy. This seems straightforward enough. However, the definition of chemistry includes a wide range of topics that must be understood to gain a mastery of the topic or even take additional courses in chemistry. In this book, we will lay the foundations of chemistry in a topic-by-topic fashion to provide you with the background you need to successfully understand chemistry.

Image Credits Figure 1.0

“Eruption” by Pétur Gauti Valgeirsson © CC-BY-NC-SA (Attribution NonCommercial ShareAlike)

“Traditional Thanksgiving” by Ben Franske © CC BY-SA (Attribution ShareAlike)

“Operation Upshot-Knothole Badger” © Public Domain

“Colourful Stones Texture” by Nicolas Raymond is licensed under a commercial licence for adaptation in an educational context

“Spanish Tempranillo wine” by Joe Hakim © CC BY (Attribution)

“Koi Fish Pond” by Eustaquio Santimano © CC BY-NC-SA (Attribution NonCommercial)

Chapter 2

1.2 Some Basic Definitions

Learning Objectives

Learn the basic terms used to describe matter.

The definition of chemistry—the study of the interactions of matter with other matter and with energy—uses some terms that should also be defined. We start the study of chemistry by defining some basic terms.

Matter. A book is matter, a computer is matter, food is matter, and dirt in the ground is matter. Sometimes matter may be difficult to identify. For example, air is matter, but because it is so thin compared to other matter (e.g., a book, a computer, food, and dirt), we sometimes forget that air has mass and takes up space. Things that are not matter include thoughts, ideas, emotions, and hopes.

Example 1 Which of the following is matter and not matter? a hot dog love a tree Solution A hot dog has mass and takes up space, so it is matter. Love is an emotion, and emotions are not matter. A tree has mass and takes up space, so it is matter. Test Yourself Which of the following is matter and not matter? the moon an idea for a new invention Answer The moon is matter. The invention itself may be matter, but the idea for it is not.

The Phases of Matter. Chemistry recognizes three fundamental phases of matter: solid (left), liquid (middle), and gas (right).

To understand matter and how it changes, we need to be able to describe matter. There are two basic ways to describe matter: physical properties and chemical properties. Physical properties are characteristics that describe matter as it exists. Some of many physical characteristics of matter are shape, color, size, and temperature. An important physical property is the phase (or state) of matter. The three fundamental phases of matter are solid, liquid, and gas (see Figure 1.1 “The Phases of Matter”).

Chemical Properties. The fact that this match burns is a chemical property of the match.

Chemical properties are characteristics of matter that describe how matter changes form in the presence of other matter. Does a sample of matter burn? Burning is a chemical property. Does it behave violently when put in water? This reaction is a chemical property as well (Figure 1.2 “Chemical Properties”). In the following chapters, we will see how descriptions of physical and chemical properties are important aspects of chemistry.

Physical Changes. The solid ice melts into liquid water—a physical change.

If matter always stayed the same, chemistry would be rather boring. Fortunately, a major part of chemistry involves change. A physical change occurs when a sample of matter changes one or more of its physical properties. For example, a solid may melt (Figure 1.3 “Physical Changes”), or alcohol in a thermometer may change volume as the temperature changes. A physical change does not affect the chemical composition of matter.

A chemical change is the process of demonstrating a chemical property, such as the burning match in Figure 1.2 “Chemical Properties”. As the matter in the match burns, its chemical composition changes, and new forms of matter with new physical properties are created. Note that chemical changes are frequently accompanied by physical changes, as the new matter will likely have different physical properties from the original matter.

Example 2 Describe each process as a physical change or a chemical change. Water in the air turns into snow. A person’s hair is cut. Bread dough becomes fresh bread in an oven. Solution Because the water is going from a gas phase to a solid phase, this is a physical change. Your long hair is being shortened. This is a physical change. Because of the oven’s temperature, chemical changes are occurring in the bread dough to make fresh bread. These are chemical changes. (In fact, a lot of cooking involves chemical changes.) Test Yourself Identify each process as a physical change or a chemical change. A fire is raging in a fireplace. Water is warmed to make a cup of coffee. Answers chemical change physical change

A sample of matter that has the same physical and chemical properties throughout is called a substance. Sometimes the phrase pure substance is used, but the word pure isn’t needed. The definition of the term substance is an example of how chemistry has a specific definition for a word that is used in everyday language with a different, vaguer definition. Here, we will use the term substance with its strict chemical definition.

Chemistry recognizes two different types of substances: elements and compounds. An element is the simplest type of chemical substance; it cannot be broken down into simpler chemical substances by ordinary chemical means. There are about 115 elements known to science, of which 80 are stable. (The other elements are radioactive, a condition we will consider in Chapter 15 “Nuclear Chemistry”.) Each element has its own unique set of physical and chemical properties. Examples of elements include iron, carbon, and gold.

A compound is a combination of more than one element. The physical and chemical properties of a compound are different from the physical and chemical properties of its constituent elements; that is, it behaves as a completely different substance. There are over 50 million compounds known, and more are being discovered daily. Examples of compounds include water, penicillin, and sodium chloride (the chemical name for common table salt).

Elements and compounds are not the only ways in which matter can be present. We frequently encounter objects that are physical combinations of more than one element or compound. Physical combinations of more than one substance are called mixtures. There are two types of mixtures. A heterogeneous mixture is a mixture composed of two or more substances. It is easy to tell, sometimes by the naked eye, that more than one substance is present. A homogeneous mixture is a combination of two or more substances that is so intimately mixed that the mixture behaves as a single substance. Another word for a homogeneous mixture is solution. Thus, a combination of salt and steel wool is a heterogeneous mixture because it is easy to see which particles of the matter are salt crystals and which are steel wool. On the other hand, if you take salt crystals and dissolve them in water, it is very difficult to tell that you have more than one substance present just by looking—even if you use a powerful microscope. The salt dissolved in water is a homogeneous mixture, or a solution (Figure 1.4 “Types of Mixtures”).

Types of Mixtures. On the left, the combination of two substances is a heterogeneous mixture because the particles of the two components look different. On the right, the salt crystals have dissolved in the water so finely that you cannot tell that salt is present. The homogeneous mixture appears like a single substance.

Example 3 Identify the following combinations as heterogeneous mixtures or homogenous mixtures. soda water (Carbon dioxide is dissolved in water.) a mixture of iron metal filings and sulfur powder (Both iron and sulfur are elements.) Solution Because carbon dioxide is dissolved in water, we can infer from the behaviour of salt crystals dissolved in water that carbon dioxide dissolved in water is (also) a homogeneous mixture. Assuming that the iron and sulfur are simply mixed together, it should be easy to see what is iron and what is sulfur, so this is a heterogeneous mixture. Test Yourself Are the following combinations homogeneous mixtures or heterogeneous mixtures? the human body an amalgam, a combination of some other metals dissolved in a small amount of mercury Answers heterogeneous mixture homogeneous mixture

There are other descriptors that we can use to describe matter, especially elements. We can usually divide elements into metals and nonmetals, and each set shares certain (but not always all) properties. A metal is an element that is solid at room temperature (although mercury is a well-known exception), is shiny and silvery, conducts electricity and heat well, can be pounded into thin sheets (a property called malleability), and can be drawn into thin wires (a property called ductility). A nonmetal is an element that is brittle when solid, does not conduct electricity or heat very well, and cannot be made into thin sheets or wires (Figure 1.5 “Semimetals”). Nonmetals also exist in a variety of phases and colors at room temperature. Some elements have properties of both metals and nonmetals and are called semimetals (or metalloids). We will see later how these descriptions can be assigned rather easily to various elements.

Semimetals. On the left is some elemental mercury, the only metal that exists as a liquid at room temperature. It has all the other expected properties of a metal. On the right, elemental sulfur is a yellow nonmetal that usually is found as a powder.

Chemistry Is Everywhere: In the Morning

Most people have a morning ritual, a process that they go through every morning to get ready for the day. Chemistry appears in many of these activities.

If you take a shower or bath in the morning, you probably use soap, shampoo, or both. These items contain chemicals that interact with the oil and dirt on your body and hair to remove them and wash them away. Many of these products also contain chemicals that make you smell good; they are called fragrances.

When you brush your teeth in the morning, you usually use toothpaste, a form of soap, to clean your teeth. Toothpastes typically contain tiny, hard particles called abrasives that physically scrub your teeth. Many toothpastes also contain fluoride, a substance that chemically interacts with the surface of the teeth to help prevent cavities.

Perhaps you take vitamins, supplements, or medicines every morning. Vitamins and other supplements contain chemicals your body needs in small amounts to function properly. Medicines are chemicals that help combat diseases and promote health.

Perhaps you make some fried eggs for breakfast. Frying eggs involves heating them enough so that a chemical reaction occurs to cook the eggs.

After you eat, the food in your stomach is chemically reacted so that the body (mostly the intestines) can absorb food, water, and other nutrients.

If you drive or take the bus to school or work, you are using a vehicle that probably burns gasoline, a material that burns fairly easily and provides energy to power the vehicle. Recall that burning is a chemical change.

These are just a few examples of how chemistry impacts your everyday life. And we haven’t even made it to lunch yet!

Chemistry in Real Life. Examples of chemistry can be found everywhere—such as in personal hygiene products, food, and motor vehicles.

Video source: The chemical world by keyj (https://viuvideos.viu.ca/media/The+Chemical+World/0_ixlxmwe8)

Key Takeaways

Chemistry is the study of matter and its interactions with other matter and energy.

Matter is anything that has mass and takes up space.

Matter can be described in terms of physical properties and chemical properties.

Physical properties and chemical properties of matter can change.

Matter is composed of elements and compounds.

Combinations of different substances are called mixtures.

Elements can be described as metals, nonmetals, and semimetals.

Exercises

1. Identify each as either matter or not matter.

a) a book

b) hate

c) light

d) a car

e) a fried egg

2. Give an example of matter in each phase: solid, liquid, or gas.

3. Does each statement represent a physical property or a chemical property?

a) Sulfur is yellow.

b) Steel wool burns when ignited by a flame.

c) A gallon of milk weighs over eight pounds.

4. Does each statement represent a physical property or a chemical property?

a) A pile of leaves slowly rots in the backyard.

b) In the presence of oxygen, hydrogen can interact to make water.

c) Gold can be stretched into very thin wires.

5. Does each statement represent a physical change or a chemical change?

a) Water boils and becomes steam.

b) Food is converted into usable form by the digestive system.

c) The alcohol in many thermometers freezes at about −40 degrees Fahrenheit.

6. Does each statement represent a physical change or a chemical change?

a) Graphite, a form of elemental carbon, can be turned into diamond, another form of carbon, at very high temperatures and pressures.

b) The house across the street has been painted a new color.

c) The elements sodium and chlorine come together to make a new substance called sodium chloride.

7. Distinguish between an element and a compound. About how many of each are known?

8. What is the difference between a homogeneous mixture and a heterogeneous mixture?

9. Identify each as a heterogeneous mixture or a homogeneous mixture.

a) Salt is mixed with pepper.

b) Sugar is dissolved in water.

c) Pasta is cooked in boiling water.

10. Identify each as a heterogeneous mixture or a homogeneous mixture.

a) air

b) dirt

c) a television set

11. In Exercise 9, which choices are also solutions?

12. In Exercise 10, which choices are also solutions?

13. Why is iron considered a metal?

14. Why is oxygen considered a nonmetal?

15. Distinguish between a metal and a nonmetal.

16. What properties do semimetals have?

17. Elemental carbon is a black, dull-looking solid that conducts heat and electricity well. It is very brittle and cannot be made into thin sheets or long wires. Of these properties, how does carbon behave as a metal? How does carbon behave as a nonmetal?

18. Pure silicon is shiny and silvery but does not conduct electricity or heat well. Of these properties, how does silicon behave as a metal? How does silicon behave as a nonmetal?

Answers

1.

a) matter

b) not matter

c) not matter

d) matter

3.

a) physical property

b) chemical property

c) physical property

5.

a) physical change

b) chemical change

c) physical change

7. An element is a fundamental chemical part of a substance; there are about 115 known elements. A compound is a combination of elements that acts as a different substance; there are over 50 million known substances.

9.

a) heterogeneous

b) homogeneous

c) heterogeneous

11. Choice b is a solution.

13. Iron is a metal because it is solid, is shiny, and conducts electricity and heat well.

15. Metals are typically shiny, conduct electricity and heat well, and are malleable and ductile; nonmetals are a variety of colors and phases, are brittle in the solid phase, and do not conduct heat or electricity well.

17. Carbon behaves as a metal because it conducts heat and electricity well. It is a nonmetal because it is black and brittle and cannot be made into sheets or wires.

Image Credits

Figure 1.1

“Ice cubes” by Darren Hester © CC BY-SA (Attribution ShareAlike)

“Glass of Water” by Greg Riegler © CC BY (Attribution)

“Tea Time” by Vélocia © CC BY-NC-ND (Attribution-NonCommercial-NoDerivs)

Figure 1.2

“Match” © CC BY-SA (Attribution ShareAlike)

Figure 1.3

“Melting Ice Cubes” by ~jar[o] © CC BY (Attribution)

Figure 1.4

“flour and cocoa mixture” by Jessica and Lon Binder © CC BY-NC-ND (Attribution-NonCommercial-NoDerivs)

“a glass of water” by bryan © CC BY-ND (Attribution-NoDerivs)

Figure 1.5

“Pouring liquid mercury” by Bionerd © CC BY (Attribution)

“Sulphur-volcano” by Heidi Soosalu © CC BY-SA (Attribution ShareAlike)

Figure 1.6

“Describing Matter” by David W. Ball © CC BY-NC-SA (Attribution NonCommercial ShareAlike)

Figure 1.7

“Soaps and Shampoos” by Takashi Ota © CC BY (Attribution)

“English Breakfast” © CC BY-SA (Attribution ShareAlike)

“Langley, Trans-Canada Highway” by James.bc © CC BY-SA (Attribution ShareAlike)

Chapter 3

1.3 Chemistry as a Science

Learning Objectives

Learn what science is and how it works.

Chemistry is a branch of science. Although science itself is difficult to define exactly, the following definition can serve as starting point. Science is the process of knowing about the natural universe through observation and experiment. Science is not the only process of knowing (e.g., the ancient Greeks simply sat and thought), but it has evolved over more than 350 years into the best process that humanity has devised to date to learn about the universe around us.

The process of science is usually stated as the scientific method, which is rather naïvely described as follows: (1) state a hypothesis, (2) test the hypothesis, and (3) refine the hypothesis. Actually, however, the process is not that simple. (For example, I don’t go into my lab every day and exclaim, “I am going to state a hypothesis today and spend the day testing it!”) The process is not that simple because science and scientists have a body of knowledge that has already been identified as coming from the highest level of understanding, and most scientists build from that body of knowledge.

An educated guess about how the natural universe works is called a hypothesis. A scientist who is familiar with how part of the natural universe works—say, a chemist—is interested in furthering that knowledge. That person makes a reasonable guess—a hypothesis—that is designed to see if the universe works in a new way as well. Here’s an example of a hypothesis: “if I mix one part of hydrogen with one part of oxygen, I can make a substance that contains both elements.”

Most good hypotheses are grounded in previously understood knowledge and represent a testable extension of that knowledge. The scientist then devises ways to test if that guess is or is not correct. That is, the scientist plans experiments. Experiments are tests of the natural universe to see if a guess (hypothesis) is correct. An experiment to test our previous hypothesis would be to actually mix hydrogen and oxygen and see what happens. Most experiments include observations of small, well-defined parts of the natural universe designed to see results of the experiments.

Why do we have to do experiments? Why do we have to test? Because the natural universe is not always so obvious, experiments are necessary. For example, it is fairly obvious that if you drop an object from a height, it will fall. Several hundred years ago (coincidentally, near the inception of modern science), the concept of gravity explained that test. However, is it obvious that the entire natural universe is composed of only about 115 fundamental chemical building blocks called elements? This wouldn’t seem true if you looked at the world around you and saw all the different forms matter can take. In fact, the concept of the element is only about 200 years old, and the last naturally occurring element was identified about 80 years ago. It took decades of tests and millions of experiments to establish what the elements actually are. These are just two examples; a myriad of such examples exists in chemistry and science in general.

When enough evidence has been collected to establish a general principle of how the natural universe works, the evidence is summarized in a theory. A theory is a general statement that explains a large number of observations. “All matter is composed of atoms” is a general statement, a theory, that explains many observations in chemistry. A theory is a very powerful statement in science. There are many statements referred to as “the theory of _______” or the “______ theory” in science (where the blanks represent a word or concept). When written in this way, theories indicate that science has an overwhelming amount of evidence of its correctness. We will see several theories in the course of this text.

A specific statement that is thought to be never violated by the entire natural universe is called a law. A scientific law is the highest understanding of the natural universe that science has and is thought to be inviolate. For example, the fact that all matter attracts all other matter—the law of gravitation—is one such law. Note that the terms theory and law used in science have slightly different meanings from those in common usage; theory is often used to mean hypothesis (“I have a theory…”), whereas a law is an arbitrary limitation that can be broken but with potential consequences (such as speed limits). Here again, science uses these terms differently, and it is important to apply their proper definitions when you use these words in science.

There is an additional phrase in our definition of science: “the natural universe.” Science is concerned only with the natural universe. What is the natural universe? It’s anything that occurs around us, well, naturally. Stars; planets; the appearance of life on earth; and how animals, plants, and other matter function are all part of the natural universe. Science is concerned with that—and only that.

Of course, there are other things that concern us. For example, is the English language part of science? Most of us can easily answer no; English is not science. English is certainly worth knowing (at least for people in predominantly English-speaking countries), but why isn’t it science? English, or any human language, isn’t science because ultimately it is contrived; it is made up. Think of it: the word spelled b-l-u-e represents a certain color, and we all agree what color that is. But what if we used the word h-a-r-d-n-r-f to describe that color? (See Figure 1.9 “English Is Not Science”.) That would be fine—as long as everyone agreed. Anyone who has learned a second language must initially wonder why a certain word is used to describe a certain concept; ultimately, the speakers of that language agreed that a particular word would represent a particular concept. It was contrived.

How would you describe this color? Blue or hardnrf? Either way, you’re not doing science.

That doesn’t mean language isn’t worth knowing. It is very important in society. But it’s not science. Science deals only with what occurs naturally.

Example 4 Which of the following fields would be considered science? geology, the study of the earth ethics, the study of morality political science, the study of governance biology, the study of living organisms Solution Because the earth is a natural object, the study of it is indeed considered part of science. Ethics is a branch of philosophy that deals with right and wrong. Although these are useful concepts, they are not science. There are many forms of government, but all are created by humans. Despite the fact that the word science appears in its name, political science is not true science. Living organisms are part of the natural universe, so the study of them is part of science. Test Yourself Which is part of science, and which is not? dynamics, the study of systems that change over time aesthetics, the concept of beauty Answers science not science

The field of science has gotten so big that it is common to separate it into more specific fields. First, there is mathematics, the language of science. All scientific fields use mathematics to express themselves—some more than others. Physics and astronomy are scientific fields concerned with the fundamental interactions between matter and energy. Chemistry, as defined previously, is the study of the interactions of matter with other matter and with energy. Biology is the study of living organisms, while geology is the study of the earth. Other sciences can be named as well. Understand that these fields are not always completely separate; the boundaries between scientific fields are not always readily apparent. Therefore, a scientist may be labelled a biochemist if he or she studies the chemistry of biological organisms.

Finally, understand that science can be either qualitative or quantitative. Qualitative implies a description of the quality of an object. For example, physical properties are generally qualitative descriptions: sulfur is yellow, your math book is heavy, or that statue is pretty. A quantitative description represents the specific amount of something; it means knowing how much of something is present, usually by counting or measuring it. As such, some quantitative descriptions would include 25 students in a class, 650 pages in a book, or a velocity of 66 miles per hour. Quantitative expressions are very important in science; they are also very important in chemistry.

Example 5 Identify each statement as either a qualitative description or a quantitative description. Gold metal is yellow. A ream of paper has 500 sheets in it. The weather outside is snowy. The temperature outside is 24 degrees Fahrenheit. Solution Because we are describing a physical property of gold, this statement is qualitative. This statement mentions a specific amount, so it is quantitative. The word snowy is a description of how the day is; therefore, it is a qualitative statement. In this case, the weather is described with a specific quantity—the temperature. Therefore, it is quantitative. Test Yourself Are these qualitative or quantitative statements? Roses are red, and violets are blue. Four score and seven years ago…. Answers qualitative quantitative

Food and Drink App: Carbonated Beverages

Some of the simple chemical principles discussed in this chapter can be illustrated with carbonated beverages: sodas, beer, and sparkling wines. Each product is produced in a different way, but they all have one thing in common. They are solutions of carbon dioxide dissolved in water.

Carbon dioxide is a compound composed of carbon and oxygen. Under normal conditions, it is a gas. If you cool it down enough, it becomes a solid known as dry ice. Carbon dioxide is an important compound in the cycle of life on earth.

Even though it is a gas, carbon dioxide can dissolve in water, just like sugar or salt can dissolve in water. When that occurs, we have a homogeneous mixture, or a solution, of carbon dioxide in water. However, very little carbon dioxide can dissolve in water. If the atmosphere were pure carbon dioxide, the solution would be only about 0.07% carbon dioxide. In reality, the air is only about 0.03% carbon dioxide, so the amount of carbon dioxide in water is reduced proportionally.

However, when soda and beer are made, manufacturers do two important things: they use pure carbon dioxide gas, and they use it at very high pressures. With higher pressures, more carbon dioxide can dissolve in the water. When the soda or beer container is sealed, the high pressure of carbon dioxide gas remains inside the package. (Of course, there are more ingredients in soda and beer besides carbon dioxide and water.)

When you open a container of soda or beer, you hear a distinctive hiss as the excess carbon dioxide gas escapes. But something else happens as well. The carbon dioxide in the solution comes out of solution as a bunch of tiny bubbles. These bubbles impart a pleasing sensation in the mouth, so much so that the soda industry sold over 225 billion servings of soda in the United States alone in 2009.

Some sparkling wines are made in the same way—by forcing carbon dioxide into regular wine. Some sparkling wines (including champagne) are made by sealing a bottle of wine with some yeast in it. The yeast ferments, a process by which the yeast converts sugars into energy and excess carbon dioxide. The carbon dioxide produced by the yeast dissolves in the wine. Then, when the champagne bottle is opened, the increased pressure of carbon dioxide is released, and the drink bubbles just like an expensive glass of soda.

Figure 1.9 Carbonation. Soda, beer, and sparkling wine take advantage of the properties of a solution of carbon dioxide in water.

“cola with ice” by Simon Cousins is licensed under the Creative Commons Attribution 2.0 Generic license. “Beer” by Will Vanlue is licensed under Cre- ative Commons the Attribution-NonCommercial-ShareAlike 2.0 Generic. “Sparkling Water” by T. Faltings is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 2.0 Generic.

Key Takeaways

Science is a process of knowing about the natural universe through observation and experiment.

Scientists go through a rigorous process to determine new knowledge about the universe; this process is generally referred to as the scientific method.

Science is broken down into various fields, of which chemistry is one.

Science, including chemistry, is both qualitative and quantitative.

Exercises

Describe the scientific method.

What is the scientific definition of a hypothesis? Why is the phrase a hypothesis is just a guess an inadequate definition?

Why do scientists need to perform experiments?

What is the scientific definition of a theory? How is this word misused in general conversation?

What is the scientific definition of a law? How does it differ from the everyday definition of a law?

Name an example of a field that is not considered a science.

Which of the following fields are studies of the natural universe?

a) biophysics (a mix of biology and physics)

b) art

c) business

8. Which of the following fields are studies of the natural universe?

a) accounting

b) geochemistry (a mix of geology and chemistry)

c) astronomy (the study of stars and planets [but not the earth])

9. Which of these statements are qualitative descriptions?

a) The Titanic was the largest passenger ship build at that time.

b) The population of the United States is about 306,000,000 people.

c) The peak of Mount Everest is 29,035 feet above sea level.

10. Which of these statements are qualitative descriptions?

a) A regular movie ticket in Cleveland costs $6.00.

b) The weather in the Democratic Republic of the Congo is the wettest in all of Africa.

c) The deepest part of the Pacific Ocean is the Mariana Trench.

11. Of the statements in Exercise 9, which are quantitative?

12. Of the statements in Exercise 10, which are quantitative?

Answers

1. Simply stated, the scientific method includes three steps: (1) stating a hypothesis, (2) testing the hypothesis, and (3) refining the hypothesis.
3. Scientists perform experiments to test their hypotheses because sometimes the nature of natural universe is not obvious.
5.A scientific law is a specific statement that is thought to be never violated by the entire natural universe. Everyday laws are arbitrary limits that society puts on its members.
7. (a) yes (b) no (c) no
9.
a) qualitative
b) not qualitative
c) not qualitative
11. Statements b and c are quantitative.

Chapter 4

Chapter 2. Measurements

Introduction to Measurements

Data suggest that a male child will weigh 50% of his adult weight at about 11 years of age. However, he will reach 50% of his adult height at only 2 years of age. It is obvious, then, that people eventually stop growing up but continue to grow out. Data also suggest that the average human height has been increasing over time. In industrialized countries, the average height of people increased 5.5 inches from 1810 to 1984. Most scientists attribute this simple, basic measurement of the human body to better health and nutrition.

In 1983, an Air Canada airplane had to make an emergency landing because it unexpectedly ran out of fuel; ground personnel had filled the fuel tanks with a certain number of pounds of fuel, not kilograms of fuel. In 1999, the Mars Climate Orbiter spacecraft was lost attempting to orbit Mars because the thrusters were programmed in terms of English units, even though the engineers built the spacecraft using metric units. In 1993, a nurse mistakenly administered 23 units of morphine to a patient rather than the “2–3” units prescribed. (The patient ultimately survived.) These incidents occurred because people weren’t paying attention to quantities.

Chemistry, like all sciences, is quantitative. It deals with quantities, things that have amounts and units. Dealing with quantities is very important in chemistry, as is relating quantities to each other. In this chapter, we will discuss how we deal with numbers and units, including how they are combined and manipulated.

Chapter 5

2.1 Expressing Numbers

Learning Objective

1. Learn to express numbers properly.

Quantities have two parts: the number and the unit. The number tells “how many.” It is important to be able to express numbers properly so that the quantities can be communicated properly.

Standard notation is the straightforward expression of a number. Numbers such as 17, 101.5, and 0.00446 are expressed in standard notation. For relatively small numbers, standard notation is fine. However, for very large numbers, such as 306,000,000, or for very small numbers, such as 0.000000419, standard notation can be cumbersome because of the number of zeros needed to place nonzero numbers in the proper position.

Scientific notation is an expression of a number using powers of 10. Powers of 10 are used to express numbers that have many zeros:

Table 2.1 Powers of 10

10 0	= 1
10 1	= 10
10 2	= 100 = 10 × 10
10 3	= 1,000 = 10 × 10 × 10
10 4	= 10,000 = 10 × 10 × 10 × 10

and so forth. The raised number to the right of the 10 indicating the number of factors of 10 in the original number is the exponent. (Scientific notation is sometimes called exponential notation.) The exponent’s value is equal to the number of zeros in the number expressed in standard notation.

Small numbers can also be expressed in scientific notation but with negative exponents:

Table 2.2 Powers of Negative 10

10 −1	= 0.1 = 1/10
10 −2	= 0.01 = 1/100
10 −3	= 0.001 = 1/1,000
10 −4	= 0.0001 = 1/10,000

and so forth. Again, the value of the exponent is equal to the number of zeros in the denominator of the associated fraction. A negative exponent implies a decimal number less than one.

A number is expressed in scientific notation by writing the first nonzero digit, then a decimal point, and then the rest of the digits. The part of a number in scientific notation that is multiplied by a power of 10 is called the coefficient. Then determine the power of 10 needed to make that number into the original number and multiply the written number by the proper power of 10. For example, to write 79,345 in scientific notation,

79,345 = 7.9345 × 10,000 = 7.9345 × 104

Thus, the number in scientific notation is 7.9345 × 104. For small numbers, the same process is used, but the exponent for the power of 10 is negative:

0.000411 = 4.11 × 1/10,000 = 4.11 × 10−4

Typically, the extra zero digits at the end or the beginning of a number are not included.

Example 1 Express these numbers in scientific notation. 306,000 0.00884 2,760,000 0.000000559 Solution The number 306,000 is 3.06 times 100,000, or 3.06 times 105. In scientific notation, the number is 3.06 × 105. The number 0.00884 is 8.84 times 1/1,000, which is 8.84 times 10−3. In scientific notation, the number is 8.84 × 10−3. The number 2,760,000 is 2.76 times 1,000,000, which is the same as 2.76 times 106. In scientific notation, the number is written as 2.76 × 106. Note that we omit the zeros at the end of the original number. The number 0.000000559 is 5.59 times 1/10,000,000, which is 5.59 times 10−7. In scientific notation, the number is written as 5.59 × 10−7. Test Yourself Express these numbers in scientific notation. 23,070 0.0009706 Answers 2.307 × 104 9.706 × 10−4

Another way to determine the power of 10 in scientific notation is to count the number of places you need to move the decimal point to get a numerical value between 1 and 10. The number of places equals the power of 10. This number is positive if you move the decimal point to the right and negative if you move the decimal point to the left.

Many quantities in chemistry are expressed in scientific notation. When performing calculations, you may have to enter a number in scientific notation into a calculator. Be sure you know how to correctly enter a number in scientific notation into your calculator. Different models of calculators require different actions for properly entering scientific notation. If in doubt, consult your instructor immediately.

Key Takeaways

Standard notation expresses a number normally.

Scientific notation expresses a number as a coefficient times a power of 10.

The power of 10 is positive for numbers greater than 1 and negative for numbers between 0 and 1.

This calculator shows only the coefficient and the power of 10 to represent the number in scientific notation. Thus, the number being displayed is 3.84951 × 10

, or 3,849,510,000,000,000,000.

Image Credit: “Casio” by Asim Bijarani © CC BY (Attribution)

Exercises

Express these numbers in scientific notation.

a) 56.9

b) 563,100

c) 0.0804

d) 0.00000667

2. Express these numbers in scientific notation.

a) −890,000

b) 602,000,000,000

c) 0.0000004099

d) 0.000000000000011

3. Express these numbers in scientific notation.

a) 0.00656

b) 65,600

c) 4,567,000

d) 0.000005507

4. Express these numbers in scientific notation.

a) 65

b) −321.09

c) 0.000077099

d) 0.000000000218

5. Express these numbers in standard notation.

a) 1.381 × 105

b) 5.22 × 10−7

c) 9.998 × 104

6. Express these numbers in standard notation.

a) 7.11 × 10−2

b) 9.18 × 102

c) 3.09 × 10−10

7. Express these numbers in standard notation.

a) 8.09 × 100

b) 3.088 × 10−5

c) −4.239 × 102

8. Express these numbers in standard notation.

a) 2.87 × 10−8

b) 1.78 × 1011

c) 1.381 × 10−23

9. These numbers are not written in proper scientific notation. Rewrite them so that they are in proper scientific notation.

a) 72.44 × 103

b) 9,943 × 10−5

c) 588,399 × 102

10. These numbers are not written in proper scientific notation. Rewrite them so that they are in proper scientific notation.

a) 0.000077 × 10−7

b) 0.000111 × 108

c) 602,000 × 1018

11. These numbers are not written in proper scientific notation. Rewrite them so that they are in proper scientific notation.

a) 345.1 × 102

b) 0.234 × 10−3

c) 1,800 × 10−2

12. These numbers are not written in proper scientific notation. Rewrite them so that they are in proper scientific notation.

a) 8,099 × 10−8

b) 34.5 × 100

c) 0.000332 × 104

13. Write these numbers in scientific notation by counting the number of places the decimal point is moved.

a) 123,456.78

b) 98,490

c) 0.000000445

14. Write these numbers in scientific notation by counting the number of places the decimal point is moved.

a) 0.000552

b) 1,987

c) 0.00000000887

15. Use your calculator to evaluate these expressions. Express the final answer in proper scientific notation.

a) 456 × (7.4 × 108) = ?

b) (3.02 × 105) ÷ (9.04 × 1015) = ?

c) 0.0044 × 0.000833 = ?

16. Use your calculator to evaluate these expressions. Express the final answer in proper scientific notation.

a) 98,000 × 23,000 = ?

b) 98,000 ÷ 23,000 = ?

c) (4.6 × 10−5) × (2.09 × 103) = ?

17. Use your calculator to evaluate these expressions. Express the final answer in proper scientific notation.

a) 45 × 132 ÷ 882 = ?

b) [(6.37 × 104) × (8.44 × 10−4)] ÷ (3.2209 × 1015) = ?

18. Use your calculator to evaluate these expressions. Express the final answer in proper scientific notation.

a) (9.09 × 108) ÷ [(6.33 × 109) × (4.066 × 10−7)] = ?

b) 9,345 × 34.866 ÷ 0.00665 = ?

Answers

1.
a) 5.69 × 101

b) 5.631 × 105

c) 8.04 × 10−2

d) 6.67 × 10−6

3.
a) 6.56 × 10−3

b) 6.56 × 104

c) 4.567 × 106

d) 5.507 × 10−6

5.
a) 138,100

b) 0.000000522

c) 99,980

7.
a) 8.09
b) 0.00003088

c) −423.9

9.
a) 7.244 × 104
b) 9.943 × 10−2
c) 5.88399 × 107
11.
a) 3.451 × 104

b) 2.34 × 10−4

c) 1.8 × 101

13.
a) 1.2345678 × 105

b) 9.849 × 104
c) 4.45 × 10−7

15.
a) 3.3744 × 1011
b) 3.3407 × 10−11
c) 3.665 × 10−6

17.
a) 6.7346 × 100

b) 1.6691 × 10−14

Chapter 6

2.2 Significant Figures

Learning Objectives Apply the concept of significant figures to limit a measurement to the proper number of digits. Recognize the number of significant figures in a given quantity. Limit mathematical results to the proper number of significant figures.

If you use a calculator to evaluate the expression

you will get the following:

and so on for many more digits. Although this answer is correct, it is somewhat presumptuous. You start with two values that each have three digits, and the answer has twelve digits? That does not make much sense from a strict numerical point of view.

Consider using a ruler to measure the width of an object, as shown in Figure 2.6 “Expressing Width”. The object is definitely more than 1 cm long, so we know that the first digit in our measurement is 1. We see by counting the tick marks on the ruler that the object is at least three ticks after the 1. If each tick represents 0.1 cm, then we know the object is at least 1.3 cm wide. But our ruler does not have any more ticks between the 0.3 and the 0.4 marks, so we can’t know exactly how much the next decimal place is. But with a practiced eye we can estimate it. Let us estimate it as about six-tenths of the way between the third and fourth tick marks, which estimates our hundredths place as 6, so we identify a measurement of 1.36 cm for the width of the object.

What is the proper way to express the width of this object?

Does it make any sense to try to report a thousandths place for the measurement? No, it doesn’t; we are not exactly sure of the hundredths place (after all, it was an estimate only), so it would be fruitless to estimate a thousandths place. Our best measurement, then, stops at the hundredths place, and we report 1.36 cm as proper measurement.

This concept of reporting the proper number of digits in a measurement or a calculation is called significant figures. Significant figures (sometimes called significant digits) represent the limits of what values of a measurement or a calculation we are sure of. The convention for a measurement is that the quantity reported should be all known values and the first estimated value. The conventions for calculations are discussed as follows.

Example 3 Use each diagram to report a measurement to the proper number of significant figures. Solution The arrow is between 4.0 and 5.0, so the measurement is at least 4.0. The arrow is between the third and fourth small tick marks, so it’s at least 0.3. We will have to estimate the last place. It looks like about one-third of the way across the space, so let us estimate the hundredths place as 3. Combining the digits, we have a measurement of 4.33 psi (psi stands for “pounds per square inch” and is a unit of pressure, like air in a tire). We say that the measurement is reported to three significant figures. The rectangle is at least 1.0 cm wide but certainly not 2.0 cm wide, so the first significant digit is 1. The rectangle’s width is past the second tick mark but not the third; if each tick mark represents 0.1, then the rectangle is at least 0.2 in the next significant digit. We have to estimate the next place because there are no markings to guide us. It appears to be about halfway between 0.2 and 0.3, so we will estimate the next place to be a 5. Thus, the measured width of the rectangle is 1.25 cm. Again, the measurement is reported to three significant figures. Test Yourself What would be the reported width of this rectangle? Answer 0.63 cm

In many cases, you will be given a measurement. How can you tell by looking what digits are significant? For example, the reported population of the United States is 306,000,000. Does that mean that it is exactly three hundred six million or is some estimation occurring?

The following conventions dictate which numbers in a reported measurement are significant and which are not significant:

Any nonzero digit is significant.

Any zeros between nonzero digits (i.e., embedded zeros) are significant.

Zeros at the end of a number without a decimal point (i.e., trailing zeros) are not significant; they serve only to put the significant digits in the correct positions. However, zeros at the end of any number with a decimal point are significant.

Zeros at the beginning of a decimal number (i.e., leading zeros) are not significant; again, they serve only to put the significant digits in the correct positions.

So, by these rules, the population figure of the United States has only three significant figures: the 3, the 6, and the zero between them. The remaining six zeros simply put the 306 in the millions position.

Example 4 Give the number of significant figures in each measurement. 36.7 m 0.006606 s 2,002 kg 306,490,000 people Solution By rule 1, all nonzero digits are significant, so this measurement has three significant figures. By rule 4, the first three zeros are not significant, but by rule 2 the zero between the sixes is; therefore, this number has four significant figures. By rule 2, the two zeros between the twos are significant, so this measurement has four significant figures. The four trailing zeros in the number are not significant, but the other five numbers are, so this number has five significant figures. Test Yourself Give the number of significant figures in each measurement. 0.000601 m 65.080 kg Answers three significant figures five significant figures

How are significant figures handled in calculations? It depends on what type of calculation is being performed. If the calculation is an addition or a subtraction, the rule is as follows: limit the reported answer to the rightmost column that all numbers have significant figures in common. For example, if you were to add 1.2 and 4.71, we note that the first number stops its significant figures in the tenths column, while the second number stops its significant figures in the hundredths column. We therefore limit our answer to the tenths column.

We drop the last digit—the 1—because it is not significant to the final answer.

The dropping of positions in sums and differences brings up the topic of rounding. Although there are several conventions, in this text we will adopt the following rule: the final answer should be rounded up if the first dropped digit is 5 or greater and rounded down if the first dropped digit is less than 5.

Example 5 Express the final answer to the proper number of significant figures. 101.2 + 18.702 = ? 202.88 − 1.013 = ? Solution If we use a calculator to add these two numbers, we would get 119.902. However, most calculators do not understand significant figures, and we need to limit the final answer to the tenths place. Thus, we drop the 02 and report a final answer of 119.9 (rounding down). A calculator would answer 201.867. However, we have to limit our final answer to the hundredths place. Because the first number being dropped is 7, which is greater than 7, we round up and report a final answer of 201.87. Test Yourself Express the answer for 3.445 + 90.83 − 72.4 to the proper number of significant figures. Answer 21.9

If the operations being performed are multiplication or division, the rule is as follows: limit the answer to the number of significant figures that the data value with the least number of significant figures has. So if we are dividing 23 by 448, which have two and three significant figures each, we should limit the final reported answer to two significant figures (the lesser of two and three significant figures):

23448=0.051339286…=0.051

The same rounding rules apply in multiplication and division as they do in addition and subtraction.

Example 6 Express the final answer to the proper number of significant figures. 76.4 × 180.4 = ? 934.9 ÷ 0.00455 = ? Solution The first number has three significant figures, while the second number has four significant figures. Therefore, we limit our final answer to three significant figures: 76.4 × 180.4 = 13,782.56 = 13,800. The first number has four significant figures, while the second number has three significant figures. Therefore we limit our final answer to three significant figures: 934.9 ÷ 0.00455 = 205,472.5275… = 205,000. Test Yourself Express the final answer to the proper number of significant figures. 22.4 × 8.314 = ? 1.381 ÷ 6.02 = ? Answers 186 0.229

As you have probably realized by now, the biggest issue in determining the number of significant figures in a value is the zero. Is the zero significant or not? One way to unambiguously determine whether a zero is significant or not is to write a number in scientific notation. Scientific notation will include zeros in the coefficient of the number only if they are significant. Thus, the number 8.666 × 106 has four significant figures. However, the number 8.6660 × 106 has five significant figures. That last zero is significant; if it were not, it would not be written in the coefficient. So when in doubt about expressing the number of significant figures in a quantity, use scientific notation and include the number of zeros that are truly significant.

An interactive or media element has been excluded from this version of the text. You can view it online here: https://pressbooks.nscc.ca/nsccintroductorychemistry/?p=57

Significant figures by JESSIE KEY March 30th, 2017

Key Takeaways

Significant figures in a quantity indicate the number of known values plus one place that is estimated.

There are rules for which numbers in a quantity are significant and which are not significant.

In calculations involving addition and subtraction, limit significant figures based on the rightmost place that all values have in common.

In calculations involving multiplication and division, limit significant figures to the least number of significant figures in all the data values.

Exercises

Express each measurement to the correct number of significant figures.

a)

b)

Express each measurement to the correct number of significant figures.

a)

b)

How many significant figures do these numbers have?

a) 23

b) 23.0

c) 0.00023

d) 0.0002302

4. How many significant figures do these numbers have?

a) 5.44 × 108

b) 1.008 × 10−5

c) 43.09

d) 0.0000001381

5. How many significant figures do these numbers have?

a) 765,890

b) 765,890.0

c) 1.2000 × 105

d) 0.0005060

6) How many significant figures do these numbers have?

a) 0.009

b) 0.0000009

c) 65,444

d) 65,040

7. Compute and express each answer with the proper number of significant figures, rounding as necessary.

a) 56.0 + 3.44 = ?

b) 0.00665 + 1.004 = ?

c) 45.99 − 32.8 = ?

d) 45.99 − 32.8 + 75.02 = ?

8. Compute and express each answer with the proper number of significant figures, rounding as necessary.

a) 1.005 + 17.88 = ?

b) 56,700 − 324 = ?

c) 405,007 − 123.3 = ?

d) 55.5 + 66.66 − 77.777 = ?

9. Compute and express each answer with the proper number of significant figures, rounding as necessary.

a) 56.7 × 66.99 = ?

b) 1.000 ÷ 77 = ?

c) 1.000 ÷ 77.0 = ?

d) 6.022 × 1.89 = ?

10. Compute and express each answer with the proper number of significant figures, rounding as necessary.

a) 0.000440 × 17.22 = ?

b) 203,000 ÷ 0.044 = ?

c) 67 × 85.0 × 0.0028 = ?

d) 999,999 ÷ 3,310 = ?

11. Write the number 87,449 in scientific notation with four significant figures.

12. Write the number 0.000066600 in scientific notation with five significant figures.

13. Write the number 306,000,000 in scientific notation to the proper number of significant figures.

14. Write the number 0.0000558 in scientific notation with two significant figures.

15. Perform each calculation and limit each answer to three significant figures.

a) 67,883 × 0.004321 = ?

b) (9.67 × 103) × 0.0055087 = ?

16. Perform each calculation and limit each answer to four significant figures.

a) 18,900 × 76.33 ÷ 0.00336 = ?

b) 0.77604 ÷ 76,003 × 8.888 = ?

Answers

1.

a) 375 psi

b) 1.30 cm

3.

a) two

b) three

c) two

d) four

5.

a) five

b) seven

c) five

d) four

7.

a) 59.4

b) 1.011

c) 13.2

d) 88.2

9.

a) 3.80 × 103

b) 0.013

c) 0.0130

d) 11.4

11.

a) 8.745 × 104

b) 6.6600 × 10−5

13.

a) 293

b) 53.3

Chapter 7

2.3 Converting Units

Learning Objective

1. Convert from one unit to another unit of the same type.

In Section 2.2 “Expressing Numbers”, we showed some examples of how to replace initial units with other units of the same type to get a numerical value that is easier to comprehend. In this section, we will formalize the process.

Consider a simple example: how many feet are there in 4 yards? Most people will almost automatically answer that there are 12 feet in 4 yards. How did you make this determination? Well, if there are 3 feet in 1 yard and there are 4 yards, then there are 4 × 3 = 12 feet in 4 yards.

This is correct, of course, but it is informal. Let us formalize it in a way that can be applied more generally. We know that 1 yard (yd) equals 3 feet (ft):

1 yd = 3 ft

In math, this expression is called an equality. The rules of algebra say that you can change (i.e., multiply or divide or add or subtract) the equality (as long as you don’t divide by zero) and the new expression will still be an equality. For example, if we divide both sides by 2, we get

We see that one-half of a yard equals 3/2, or one and a half, feet—something we also know to be true, so the above equation is still an equality. Going back to the original equality, suppose we divide both sides of the equation by 1 yard (number and unit):

The expression is still an equality, by the rules of algebra. The left fraction equals 1. It has the same quantity in the numerator and the denominator, so it must equal 1. The quantities in the numerator and denominator cancel, both the number and the unit:

When everything cancels in a fraction, the fraction reduces to 1:

We have an expression, 3 ft1 yd, that equals 1. This is a strange way to write 1, but it makes sense: 3 ft equal 1 yd, so the quantities in the numerator and denominator are the same quantity, just expressed with different units. The expression 3 ft1 yd is called a conversion factor, and it is used to formally change the unit of a quantity into another unit. (The process of converting units in such a formal fashion is sometimes called dimensional analysis or the factor label method.)

To see how this happens, let us start with the original quantity:

4 yd

Now let us multiply this quantity by 1. When you multiply anything by 1, you don’t change the value of the quantity. Rather than multiplying by just 1, let us write 1 as 3 ft1 yd:

The 4 yd term can be thought of as 4 yd/1; that is, it can be thought of as a fraction with 1 in the denominator. We are essentially multiplying fractions. If the same thing appears in the numerator and denominator of a fraction, they cancel. In this case, what cancels is the unit yard:

That is all that we can cancel. Now, multiply and divide all the numbers to get the final answer:

Again, we get an answer of 12 ft, just as we did originally. But in this case, we used a more formal procedure that is applicable to a variety of problems.

How many millimeters are in 14.66 m? To answer this, we need to construct a conversion factor between millimeters and meters and apply it correctly to the original quantity. We start with the definition of a millimeter, which is

1 mm = 1/1,000 m

The 1/1,000 is what the prefix milli- means. Most people are more comfortable working without fractions, so we will rewrite this equation by bringing the 1,000 into the numerator of the other side of the equation:

1,000 mm = 1 m

Now we construct a conversion factor by dividing one quantity into both sides. But now a question arises: which quantity do we divide by? It turns out that we have two choices, and the two choices will give us different conversion factors, both of which equal 1:

Which conversion factor do we use? The answer is based on what unit you want to get rid of in your initial quantity. The original unit of our quantity is meters, which we want to convert to millimeters. Because the original unit is assumed to be in the numerator, to get rid of it, we want the meter unit in the denominator; then they will cancel. Therefore, we will use the second conversion factor. Canceling units and performing the mathematics, we get

Note how m cancels, leaving mm, which is the unit of interest.

The ability to construct and apply proper conversion factors is a very powerful mathematical technique in chemistry. You need to master this technique if you are going to be successful in this and future courses.

Example 2.6 Convert 35.9 kL to liters. Convert 555 nm to meters. Solution We will use the fact that 1 kL = 1,000 L. Of the two conversion factors that can be defined, the one that will work is 1,000 L/1 kL. Applying this conversion factor, we get We will use the fact that 1 nm = 1/1,000,000,000 m, which we will rewrite as 1,000,000,000 nm = 1 m, or 109 nm = 1 m. Of the two possible conversion factors, the appropriate one has the nm unit in the denominator: 1 m/109 nm. Applying this conversion factor, we get In the final step, we expressed the answer in scientific notation. Test Yourself Convert 67.08 μL to liters. Convert 56.8 m to kilometers. Answers 6.708 × 10−5 L 5.68 × 10−2 km

What if we have a derived unit that is the product of more than one unit, such as m2? Suppose we want to convert square meters to square centimeters? The key is to remember that m2 means m × m, which means we have two meter units in our derived unit. That means we have to include two conversion factors, one for each unit. For example, to convert 17.6 m2 to square centimeters, we perform the conversion as follows:

Example 2. 7 How many cubic centimeters are in 0.883 m3? Solution With an exponent of 3, we have three length units, so by extension we need to use three conversion factors between meters and centimeters. Thus, we have You should demonstrate to yourself that the three meter units do indeed cancel. Test Yourself How many cubic millimeters are present in 0.0923 m3? Answer 9.23 × 107 mm3

Suppose the unit you want to convert is in the denominator of a derived unit; what then? Then, in the conversion factor, the unit you want to remove must be in the numerator. This will cancel with the original unit in the denominator and introduce a new unit in the denominator. The following example illustrates this situation.

Example 2.8 Convert 88.4 m/min to meters/second. Solution We want to change the unit in the denominator from minutes to seconds. Because there are 60 seconds in 1 minute (60 s = 1 min), we construct a conversion factor so that the unit we want to remove, minutes, is in the numerator: 1 min/60 s. Apply and perform the math: Notice how the 88.4 automatically goes in the numerator. That’s because any number can be thought of as being in the numerator of a fraction divided by 1. Test Yourself Convert 0.203 m/min to meters/second. Answer 0.00338 m/s or 3.38 × 10−3 m/s Example 2.8 How Fast Is Fast?. A common garden snail moves at a rate of about 0.2 m/min, which is about 0.003 m/s, which is 3 mm/s!

Sometimes there will be a need to convert from one unit with one numerical prefix to another unit with a different numerical prefix. How do we handle those conversions? Well, you could memorize the conversion factors that interrelate all numerical prefixes. Or you can go the easier route: first convert the quantity to the base unit, the unit with no numerical prefix, using the definition of the original prefix. Then convert the quantity in the base unit to the desired unit using the definition of the second prefix. You can do the conversion in two separate steps or as one long algebraic step. For example, to convert 2.77 kg to milligrams:

Alternatively, it can be done in a single multistep process:

You get the same answer either way.

Example 2.9 How many nanoseconds are in 368.09 μs? Solution You can either do this as a one-step conversion from microseconds to nanoseconds or convert to the base unit first and then to the final desired unit. We will use the second method here, showing the two steps in a single line. Using the definitions of the prefixes micro- and nano-, Test Yourself How many milliliters are in 607.8 kL? Answer 6.078 × 108 mL

When considering the significant figures of a final numerical answer in a conversion, there is one important case where a number does not impact the number of significant figures in a final answer—the so-called exact number. An exact number is a number from a defined relationship, not a measured one. For example, the prefix kilo- means 1,000—exactly 1,000, no more or no less. Thus, in constructing the conversion factor

neither the 1,000 nor the 1 enter into our consideration of significant figures. The numbers in the numerator and denominator are defined exactly by what the prefix kilo- means. Another way of thinking about it is that these numbers can be thought of as having an infinite number of significant figures, such as

The other numbers in the calculation will determine the number of significant figures in the final answer.

Example 2.10 A rectangular plot in a garden has the dimensions 36.7 cm by 128.8 cm. What is the area of the garden plot in square meters? Express your answer in the proper number of significant figures. Solution Area is defined as the product of the two dimensions, which we then have to convert to square meters and express our final answer to the correct number of significant figures, which in this case will be three. The 1 and 100 in the conversion factors do not affect the determination of significant figures because they are exact numbers, defined by the centi- prefix. Test Yourself What is the volume of a block in cubic meters whose dimensions are 2.1 cm × 34.0 cm × 118 cm? Answer 0.0084 m3

Chemistry Is Everywhere: The Gimli Glider

On July 23, 1983, an Air Canada Boeing 767 jet had to glide to an emergency landing at Gimli Industrial Park Airport in Gimli, Manitoba, because it unexpectedly ran out of fuel during flight. There was no loss of life in the course of the emergency landing, only some minor injuries associated in part with the evacuation of the craft after landing. For the remainder of its operational life (the plane was retired in 2008), the aircraft was nicknamed “the Gimli Glider.”

The 767 took off from Montreal on its way to Ottawa, ultimately heading for Edmonton, Canada. About halfway through the flight, all the engines on the plane began to shut down because of a lack of fuel. When the final engine cut off, all electricity (which was generated by the engines) was lost; the plane became, essentially, a powerless glider. Captain Robert Pearson was an experienced glider pilot, although he had never flown a glider the size of a 767. First Officer Maurice Quintal quickly determined that the aircraft would not be able make it to Winnipeg, the next large airport. He suggested his old Royal Air Force base at Gimli Station, one of whose runways was still being used as a community airport. Between the efforts of the pilots and the flight crew, they managed to get the airplane safely on the ground (although with buckled landing gear) and all passengers off safely.

What happened? At the time, Canada was transitioning from the older English system to the metric system. The Boeing 767s were the first aircraft whose gauges were calibrated in the metric system of units (liters and kilograms) rather than the English system of units (gallons and pounds). Thus, when the fuel gauge read 22,300, the gauge meant kilograms, but the ground crew mistakenly fueled the plane with 22,300 pounds of fuel. This ended up being just less than half of the fuel needed to make the trip, causing the engines to quit about halfway to Ottawa. Quick thinking and extraordinary skill saved the lives of 61 passengers and 8 crew members—an incident that would not have occurred if people were watching their units.

View this video on unit conversion by Dr. Jessie A. Key / Vancouver Island University for a lecture on unit conversion.

An interactive or media element has been excluded from this version of the text. You can view it online here: https://pressbooks.nscc.ca/nsccintroductorychemistry/?p=84

Key Takeaways

Units can be converted to other units using the proper conversion factors.

Conversion factors are constructed from equalities that relate two different units.

Conversions can be a single step or multistep.

Unit conversion is a powerful mathematical technique in chemistry that must be mastered.

Exact numbers do not affect the determination of significant figures.

Exercises

Write the two conversion factors that exist between the two given units.

a) milliliters and liters

b) microseconds and seconds

c) kilometers and meters

2. Write the two conversion factors that exist between the two given units.

a) kilograms and grams

b) milliseconds and seconds

c) centimeters and meters

3. Perform the following conversions.

a) 5.4 km to meters

b) 0.665 m to millimeters

c) 0.665 m to kilometers

4. Perform the following conversions.

a) 90.6 mL to liters

b) 0.00066 ML to liters

c) 750 L to kiloliters

5. Perform the following conversions.

a) 17.8 μg to grams

b) 7.22 × 102 kg to grams

c) 0.00118 g to nanograms

6. Perform the following conversions.

a) 833 ns to seconds

b) 5.809 s to milliseconds

c) 2.77 × 106 s to megaseconds

7. Perform the following conversions.

a) 9.44 m2 to square centimeters

b) 3.44 × 108 mm3 to cubic meters

8. Perform the following conversions.

a) 0.00444 cm3 to cubic meters

b) 8.11 × 102 m2 to square nanometers

9. Why would it be inappropriate to convert square centimeters to cubic meters?

10. Why would it be inappropriate to convert from cubic meters to cubic seconds?

11. Perform the following conversions.

a) 45.0 m/min to meters/second

b) 0.000444 m/s to micrometers/second

c) 60.0 km/h to kilometers/second

12. Perform the following conversions.

a) 3.4 × 102 cm/s to centimeters/minute

b) 26.6 mm/s to millimeters/hour

c) 13.7 kg/L to kilograms/milliliters

13. Perform the following conversions.

a) 0.674 kL to milliliters

b) 2.81 × 1012 mm to kilometers

c) 94.5 kg to milligrams

14. Perform the following conversions.

a) 6.79 × 10−6 kg to micrograms

b) 1.22 mL to kiloliters

c) 9.508 × 10−9 ks to milliseconds

15. Perform the following conversions.

a) 6.77 × 1014 ms to kiloseconds

b) 34,550,000 cm to kilometers

16. Perform the following conversions.

a) 4.701 × 1015 mL to kiloliters

b) 8.022 × 10−11 ks to microseconds

17. Perform the following conversions. Note that you will have to convert units in both the numerator and the denominator.

a) 88 ft/s to miles/hour (Hint: use 5,280 ft = 1 mi.)

b) 0.00667 km/h to meters/second

18. Perform the following conversions. Note that you will have to convert units in both the numerator and the denominator.

a) 3.88 × 102 mm/s to kilometers/hour

b) 1.004 kg/L to grams/milliliter

19. What is the area in square millimeters of a rectangle whose sides are 2.44 cm × 6.077 cm? Express the answer to the proper number of significant figures.

20. What is the volume in cubic centimeters of a cube with sides of 0.774 m? Express the answer to the proper number of significant figures.

21. The formula for the area of a triangle is 1/2 × base × height. What is the area of a triangle in square centimeters if its base is 1.007 m and its height is 0.665 m? Express the answer to the proper number of significant figures.

22. The formula for the area of a triangle is 1/2 × base × height. What is the area of a triangle in square meters if its base is 166 mm and its height is 930.0 mm? Express the answer to the proper number of significant figures.

Answers

1.

a) 1,000 mL/1 L and 1 L/1,000 mL

b) 1,000,000 μs/1 s and 1 s/1,000,000 μs

c) 1,000 m/1 km and 1 km1,000 m

3.

a) 5,400 m

b) 665 mm

c) 6.65 × 10−4 km

5.

a) 1.78 × 10−5 g

b) 7.22 × 105 g

c) 1.18 × 106 ng

7.

a) 94,400 cm2

b) 0.344 m3

9.

One is a unit of area, and the other is a unit of volume.

11.

a) 0.75 m/s

b) 444 µm/s

c) 1.666 × 10−2 km/s

13.

a) 674,000 mL

b) 2.81 × 10

km

c) 9.45 × 107 mg

15.

a) 6.77 × 108 ks

b) 345.5 km

17.

a) 6.0 × 101 mi/h

b) 0.00185 m/s

19.

1.48 × 103 mm2

21.

3.35 × 103 cm2

Image Credits

Example 2.8

“Grapevine snail” by Jürgen Schoner © CC BY-SA (Attribution ShareAlike)

Figure 2.2

“The Gimli Glider” by Adrian Pingstone © Public Domain

Chapter 8

2.4 Other Units: Temperature and Density

Learning Objectives Learn about the various temperature scales that are commonly used in chemistry. Define density and use it as a conversion factor.

There are other units in chemistry that are important, and we will cover others in the course of the entire book. One of the fundamental quantities in science is temperature. Temperature is a measure of the average amount of energy of motion, or kinetic energy, a system contains. Temperatures are expressed using scales that use units called degrees, and there are several temperature scales in use. In the United States, the commonly used temperature scale is the Fahrenheit scale (symbolized by °F and spoken as “degrees Fahrenheit”). On this scale, the freezing point of liquid water (the temperature at which liquid water turns to solid ice) is 32 °F, and the boiling point of water (the temperature at which liquid water turns to steam) is 212 °F.

Science also uses other scales to express temperature. The Celsius scale (symbolized by °C and spoken as “degrees Celsius”) is a temperature scale where 0 °C is the freezing point of water and 100 °C is the boiling point of water; the scale is divided into 100 divisions between these two landmarks and extended higher and lower. By comparing the Fahrenheit and Celsius scales, a conversion between the two scales can be determined:

Using these formulas, we can convert from one temperature scale to another. The number 32 in the formulas is exact and does not count in significant figure determination.

Example 12 What is 98.6 °F in degrees Celsius? What is 25.0 °C in degrees Fahrenheit? Solution Using the first formula from above, we have °C = (98.6 – 32) × 5/9 = 66.6 × 5/9 = 37.0 °C Using the second formula from above, we have °F = (25.0 × 9/5) + 3/2 = 45.0 + 32 = 77.0 °F Test Yourself Convert 0 °F to degrees Celsius. Convert 212 °C to degrees Fahrenheit. Answers −17.8 °C 414 °F

The fundamental unit of temperature (another fundamental unit of science, bringing us to four) in SI is the kelvin (K). The Kelvin temperature scale (note that the name of the scale capitalizes the word Kelvin, but the unit itself is lowercase) uses degrees that are the same size as the Celsius degree, but the numerical scale is shifted up by 273.15 units. That is, the conversion between the Kelvin and Celsius scales is as follows:

K = °C + 273.15
°C = K − 273.15

For most purposes, it is acceptable to use 273 instead of 273.15. Note that the Kelvin scale does not use the word degrees; a temperature of 295 K is spoken of as “two hundred ninety-five kelvins” and not “two hundred ninety-five degrees Kelvin.”

The reason that the Kelvin scale is defined this way is because there exists a minimum possible temperature called absolute zero. The Kelvin temperature scale is set so that 0 K is absolute zero, and temperature is counted upward from there. Normal room temperature is about 295 K, as seen in the following example.

Example 13 If normal room temperature is 72.0 °F, what is room temperature in degrees Celsius and kelvins? Solution First, we use the formula to determine the temperature in degrees Celsius: °C = (72.0 – 32) × 5/9 = 40.0 × 5/9 = 22.2 °C Then we use the appropriate formula above to determine the temperature in the Kelvin scale: K = 22.2 °C + 273.15 = 295.4 K So, room temperature is about 295 K. Test Yourself What is 98.6 °F on the Kelvin scale? Answer 310.2 K

Figure 2.9 “Fahrenheit, Celsius, and Kelvin Temperatures” compares the three temperature scales. Note that science uses the Celsius and Kelvin scales almost exclusively; virtually no practicing chemist expresses laboratory-measured temperatures with the Fahrenheit scale. (In fact, the United States is one of the few countries in the world that still uses the Fahrenheit scale on a daily basis. The other two countries are Liberia and Myanmar [formerly Burma].

Density is a physical property that is defined as a substance’s mass divided by its volume:

Density is usually a measured property of a substance, so its numerical value affects the significant figures in a calculation. Notice that density is defined in terms of two dissimilar units, mass and volume. That means that density overall has derived units, just like velocity. Common units for density include g/mL, g/cm3, g/L, kg/L, and even kg/m3. Densities for some common substances are listed in Table 2.2 “Densities of Some Common Substances”.

Table 2.2 Densities of Some Common Substances

Substance	Density (g/mL or g/cm 3 )
water	1.0
gold	19.3
mercury	13.6
air	0.0012
cork	0.22–0.26
aluminum	2.7
iron	7.87

Because of how it is defined, density can act as a conversion factor for switching between units of mass and volume. For example, suppose you have a sample of aluminum that has a volume of 7.88 cm3. How can you determine what mass of aluminum you have without measuring it? You can use the volume to calculate it. If you multiply the given volume by the known density (from Table 2.2 “Densities of Some Common Substances”), the volume units will cancel and leave you with mass units, telling you the mass of the sample:

7.88 cm3 × 2.7 g/cm3 = 21 g of aluminum

where we have limited our answer to two significant figures.

Example 14 What is the mass of 44.6 mL of mercury? Solution Use the density from Table 2.2 “Densities of Some Common Substances” as a conversion factor to go from volume to mass: 44.6 mL × 13.6 g/mL = 607 g The mass of the mercury is 607 g. Test Yourself What is the mass of 25.0 cm3 of iron? Answer 197 g

Density can also be used as a conversion factor to convert mass to volume—but care must be taken. We have already demonstrated that the number that goes with density normally goes in the numerator when density is written as a fraction. Take the density of gold, for example:

Although this was not previously pointed out, it can be assumed that there is a 1 in the denominator:

That is, the density value tells us that we have 19.3 grams for every 1 milliliter of volume, and the 1 is an exact number. When we want to use density to convert from mass to volume, the numerator and denominator of density need to be switched—that is, we must take the reciprocal of the density. In so doing, we move not only the units but also the numbers:

This reciprocal density is still a useful conversion factor, but now the mass unit will cancel and the volume unit will be introduced. Thus, if we want to know the volume of 45.9 g of gold, we would set up the conversion as follows:

Note how the mass units cancel, leaving the volume unit, which is what we’re looking for.

Example 15 A cork stopper from a bottle of wine has a mass of 3.78 g. If the density of cork is 0.22 g/cm3, what is the volume of the cork? Solution To use density as a conversion factor, we need to take the reciprocal so that the mass unit of density is in the denominator. Taking the reciprocal, we find We can use this expression as the conversion factor. So Test Yourself What is the volume of 3.78 g of gold? Answer 0.196 cm3

Care must be used with density as a conversion factor. Make sure the mass units are the same, or the volume units are the same, before using density to convert to a different unit. Often, the unit of the given quantity must be first converted to the appropriate unit before applying density as a conversion factor.

Food and Drink App: Cooking Temperatures

Because degrees Fahrenheit is the common temperature scale in the United States, kitchen appliances, such as ovens, are calibrated in that scale. A cool oven may be only 150°F, while a cake may be baked at 350°F and a chicken roasted at 400°F. The broil setting on many ovens is 500°F, which is typically the highest temperature setting on a household oven.

People who live at high altitudes, typically 2,000 ft above sea level or higher, are sometimes urged to use slightly different cooking instructions on some products, such as cakes and bread, because water boils at a lower temperature the higher in altitude you go, meaning that foods cook slower. For example, in Cleveland water typically boils at 212°F (100°C), but in Denver, the Mile-High City, water boils at about 200°F (93.3°C), which can significantly lengthen cooking times. Good cooks need to be aware of this.

At the other end is pressure cooking. A pressure cooker is a closed vessel that allows steam to build up additional pressure, which increases the temperature at which water boils. A good pressure cooker can get to temperatures as high as 252°F (122°C); at these temperatures, food cooks much faster than it normally would. Great care must be used with pressure cookers because of the high pressure and high temperature. (When a pressure cooker is used to sterilize medical instruments, it is called an autoclave.)

Other countries use the Celsius scale for everyday purposes. Therefore, oven dials in their kitchens are marked in degrees Celsius. It can be confusing for US cooks to use ovens abroad—a 425°F oven in the United States is equivalent to a 220°C oven in other countries. These days, many oven thermometers are marked with both temperature scales.

Key Takeaways

Chemistry uses the Celsius and Kelvin scales to express temperatures.

A temperature on the Kelvin scale is the Celsius temperature plus 273.15.

The minimum possible temperature is absolute zero and is assigned 0 K on the Kelvin scale.

Density relates a substance’s mass and volume.

Density can be used to calculate volume from a given mass or mass from a given volume.

Exercises

Perform the following conversions.

a) 255°F to degrees Celsius

b) −255°F to degrees Celsius

c) 50.0°C to degrees Fahrenheit

d) −50.0°C to degrees Fahrenheit

2. Perform the following conversions.

a) 1,065°C to degrees Fahrenheit

b) −222°C to degrees Fahrenheit

c) 400.0°F to degrees Celsius

d) 200.0°F to degrees Celsius

3. Perform the following conversions.

a) 100.0°C to kelvins

b) −100.0°C to kelvins

c) 100 K to degrees Celsius

d) 300 K to degrees Celsius

4. Perform the following conversions.

a) 1,000.0 K to degrees Celsius

b) 50.0 K to degrees Celsius

c) 37.0°C to kelvins

d) −37.0°C to kelvins

5. Convert 0 K to degrees Celsius. What is the significance of the temperature in degrees Celsius?

6. Convert 0 K to degrees Fahrenheit. What is the significance of the temperature in degrees Fahrenheit?

7. The hottest temperature ever recorded on the surface of the earth was 136°F in Libya in 1922. What is the temperature in degrees Celsius and in kelvins?

8. The coldest temperature ever recorded on the surface of the earth was −128.6°F in Vostok, Antarctica, in 1983. What is the temperature in degrees Celsius and in kelvins?

9. Give at least three possible units for density.

10. What are the units when density is inverted? Give three examples.

11. A sample of iron has a volume of 48.2 cm3. What is its mass?

12. A sample of air has a volume of 1,015 mL. What is its mass?

13. The volume of hydrogen used by the Hindenburg, the German airship that exploded in New Jersey in 1937, was 2.000 × 108 L. If hydrogen gas has a density of 0.0899 g/L, what mass of hydrogen was used by the airship?

14. The volume of an Olympic-sized swimming pool is 2.50 × 109 cm3. If the pool is filled with alcohol (d = 0.789 g/cm3), what mass of alcohol is in the pool?

15. A typical engagement ring has 0.77 cm3 of gold. What mass of gold is present?

16. A typical mercury thermometer has 0.039 mL of mercury in it. What mass of mercury is in the thermometer?

17. What is the volume of 100.0 g of lead if lead has a density of 11.34 g/cm3?

18. What is the volume of 255.0 g of uranium if uranium has a density of 19.05 g/cm3?

19. What is the volume in liters of 222 g of neon if neon has a density of 0.900 g/L?

20. What is the volume in liters of 20.5 g of sulfur hexafluoride if sulfur hexafluoride has a density of 6.164 g/L?

21. Which has the greater volume, 100.0 g of iron (d = 7.87 g/cm3) or 75.0 g of gold (d = 19.3 g/cm3)?

22. Which has the greater volume, 100.0 g of hydrogen gas (d = 0.0000899 g/cm3) or 25.0 g of argon gas (d = 0.00178 g/cm3)?

Answers

1.

a) 124°C

b) −159°C

c) 122°F

d) −58°F

3.

a) 373 K

b) 173 K

c) −173°C

d) 27°C

5.
−273°C. This is the lowest possible temperature in degrees Celsius.

7.

57.8°C; 331 K

9.

g/mL, g/L, and kg/L (answers will vary)

11.

379 g

13.

1.80 × 107 g

15.

15 g

17.

8.818 cm3

19.

247 L

21.

The 100.0 g of iron has the greater volume.

Chapter 9

2.5 Expressing Units

Learning Objectives

Learn the units that go with various quantities.

Express units using their abbreviations.

Make new units by combining numerical prefixes with units.

A number indicates “how much,” but the unit indicates “of what.” The “of what” is important when communicating a quantity. For example, if you were to ask a friend how close you are to Lake Erie and your friend says “six,” then your friend isn’t giving you complete information. Six what? Six miles? Six inches? Six city blocks? The actual distance to the lake depends on what units you use.

Chemistry, like most sciences, uses the International System of Units, or SI for short. (The letters SI stand for the French “le Système International d’unités.”) SI specifies certain units for various types of quantities, based on seven fundamental units for various quantities. We will use most of the fundamental units in chemistry. Initially, we will deal with three fundamental units. The meter (m) is the SI unit of length. It is a little longer than a yard (see Figure 2.3 “The Meter”). The SI unit of mass is the kilogram (kg), which is about 2.2 pounds (lb). The SI unit of time is the second (s).

To express a quantity, you need to combine a number with a unit. If you have a length that is 2.4 m, then you express that length as simply 2.4 m. A time of 15,000 s can be expressed as 1.5 × 104 s in scientific notation.

Sometimes, a given unit is not an appropriate size to easily express a quantity. For example, the width of a human hair is very small, and it doesn’t make much sense to express it in meters. SI also defines a series of numerical prefixes that refer to multiples or fractions of a fundamental unit to make a unit more conveniently sized for a specific quantity. Table 2.1 “Multiplicative Prefixes for SI Units” lists the prefixes, their abbreviations, and their multiplicative factors. Some of the prefixes, such as kilo-, mega-, and giga-, represent more than one of the fundamental unit, while other prefixes, such as centi-, milli-, and micro-, represent fractions of the original unit. Note, too, that once again we are using powers of 10. Each prefix is a multiple of or fraction of a power of 10.

Table 2.1 Multiplicative Prefixes for SI Units

Prefix	Abbreviation	Multiplicative Amount
giga-	G	1,000,000,000 ×
mega-	M	1,000,000 ×
kilo-	k	1,000 ×
deci-	d	1/10 ×
centi-	c	1/100 ×
milli-	m	1/1,000 ×
micro-	μ*	1/1,000,000 ×
nano-	n	1/1,000,000,000 ×
pico-	p	1/1,000,000,000,000 ×
* The letter μ is the Greek letter lowercase equivalent to an m and is called “mu” (pronounced “myoo”).

To use the fractions to generate new units, simply combine the prefix with the unit itself; the abbreviation for the new unit is the combination of the abbreviation for the prefix and the abbreviation of the unit. For example, the kilometer (km) is 1,000 × meter, or 1,000 m. Thus, 5 kilometers (5 km) is equal to 5,000 m. Similarly, a millisecond (ms) is 1/1,000 × second, or one-thousandth of a second. Thus, 25 ms is 25 thousandths of a second. You will need to become proficient in combining prefixes and units. (You may recognize that one of our fundamental units, the kilogram, automatically has a prefix-unit combination, the kilogram. The word kilogram means 1,000 g.)

In addition to the fundamental units, SI also allows for derived units based on a fundamental unit or units. There are many derived units used in science. For example, the derived unit for area comes from the idea that area is defined as width times height. Because both width and height are lengths, they both have the fundamental unit of meter, so the unit of area is meter × meter, or meter2 (m2). This is sometimes spoken as “square meters.” A unit with a prefix can also be used to derive a unit for area, so we can also have cm2, mm2, or km2 as acceptable units for area.

Volume is defined as length times width times height, so it has units of meter × meter × meter or meter3 (m3), sometimes spoken as “cubic meters.” The cubic meter is a rather large unit, however, so another unit is defined that is somewhat more manageable: the liter (L). A liter is 1/1,000th of a cubic meter and is a little more than 1 quart in volume (see Figure 2.4 “The Liter”). Prefixes can also be used with the liter unit, so we can speak of milliliters (1/1,000th of a liter; mL) and kiloliters (1,000 L; kL).

Another definition of a liter is one-tenth of a meter cubed. Because one-tenth of a meter is 10 cm, then a liter is equal to 1,000 cm3 (Figure 2.5 “The Size of 1 Liter”). Because 1 L equals 1,000 mL, we conclude that 1 mL equals 1 cm3; thus, these units are interchangeable.

Figure 2.5 The Size of 1 Liter. One liter equals 1,000 cm

, so 1 cm

is the same as 1 mL.

Units not only are multiplied together but also can be divided. For example, if you are traveling at one meter for every second of time elapsed, your velocity is 1 meter per second, or 1 m/s. The word per implies division, so velocity is determined by dividing a distance quantity by a time quantity. Other units for velocity include kilometers per hour (km/h) or even micrometers per nanosecond (μm/ns). Later, we will see other derived units that can be expressed as fractions.

Example 2 A human hair has a diameter of about 6.0 × 10−5 m. Suggest an appropriate unit for this measurement and write the diameter of a human hair in terms of that unit. What is the velocity of a car if it goes 25 m in 5.0 s? Solution The scientific notation 10−5 is close to 10−6, which defines the micro- prefix. Let us use micrometers as the unit for hair diameter. The number 6.0 × 10−5 can be written as 60 × 10−6, and a micrometer is 10−6 m, so the diameter of a human hair is about 60 μm. If velocity is defined as a distance quantity divided by a time quantity, then velocity is 25 meters/5.0 seconds. Dividing the numbers gives us 25/5.0 = 5.0, and dividing the units gives us meters/second, or m/s. The velocity is 5.0 m/s. Test Yourself Express the volume of an Olympic-sized swimming pool, 2,500,000 L, in more appropriate units. A common garden snail moves about 6.1 m in 30 min. What is its velocity in meters per minute (m/min)? Answers 2.5 ML 0.203 m/min

Key Takeaways

Numbers tell “how much,” and units tell “of what.”

Chemistry uses a set of fundamental units and derived units from SI units.

Chemistry uses a set of prefixes that represent multiples or fractions of units.

Units can be multiplied and divided to generate new units for quantities.

Exercises

Identify the unit in each quantity.

a) 2 boxes of crayons

b) 3.5 grams of gold

2. Identify the unit in each quantity.

a) 32 oz of cheddar cheese

b) 0.045 cm3 of water

3. Identify the unit in each quantity.

a) 9.58 s (the current world record in the 100 m dash)

b) 6.14 m (the current world record in the pole vault)

4. Identify the unit in each quantity.

a) 2 dozen eggs

b) 2.4 km/s (the escape velocity of the moon, which is the velocity you need at the surface to escape the moon’s gravity)

5. Indicate what multiplier each prefix represents.

a) k

b) m

c) M

6. Indicate what multiplier each prefix represents.

a) c

b) G

c) μ

7. Give the prefix that represents each multiplier.

a) 1/1,000th ×

b) 1,000 ×

c) 1,000,000,000 ×

8. Give the prefix that represents each multiplier.

a) 1/1,000,000,000th ×

b) 1/100th ×

c) 1,000,000 ×

9. Complete the following table with the missing information.

Unit	Abbreviation
kilosecond
mL
Mg
centimeter

10.Complete the following table with the missing information.

Unit	Abbreviation
kilometer per second
second
cm 3
μL
nanosecond

11. Express each quantity in a more appropriate unit. There may be more than one acceptable answer.

a) 3.44 × 10−6 s

b) 3,500 L

c) 0.045 m

12. Express each quantity in a more appropriate unit. There may be more than one acceptable answer.

a) 0.000066 m/s (Hint: you need consider only the unit in the numerator.)

b) 4.66 × 106 s

c) 7,654 L

13. Express each quantity in a more appropriate unit. There may be more than one acceptable answer.

a) 43,600 mL

b) 0.0000044 m

c) 1,438 ms

14. Express each quantity in a more appropriate unit. There may be more than one acceptable answer.

a) 0.000000345 m3

b) 47,000,000 mm3

c) 0.00665 L

15. Multiplicative prefixes are used for other units as well, such as computer memory. The basic unit of computer memory is the byte (b). What is the unit for one million bytes?

16. You may have heard the terms microscale or nanoscale to represent the sizes of small objects. What units of length do you think are useful at these scales? What fractions of the fundamental unit of length are these units?

17. Acceleration is defined as a change in velocity per time. Propose a unit for acceleration in terms of the fundamental SI units.

18. Density is defined as the mass of an object divided by its volume. Propose a unit of density in terms of the fundamental SI units.

Answers

1.

a) boxes of crayons

b) grams of gold

3.

a) seconds

b) meters

5.

a) 1,000 ×

b) 1/1,000 ×

c) 1,000,000 ×

7.

a) milli-

b) kilo-

c) giga-

9.

Unit	Abbreviation
kilosecond	ks
milliliter	mL
megagram	Mg
centimeter	cm

11.

a) 3.44 μs

b) 3.5 kL

c) 4.5 cm

13.

a) 43.6 L

b) 4.4 µm

c) 1.438 s

15. megabytes (Mb)

17. meters/second2

Chapter 10

2.6 End-of-Chapter Material

Additional Exercises

Evaluate 0.00000000552 × 0.0000000006188 and express the answer in scientific notation. You may have to rewrite the original numbers in scientific notation first.

Evaluate 333,999,500,000 ÷ 0.00000000003396 and express the answer in scientific notation. You may need to rewrite the original numbers in scientific notation first.

Express the number 6.022 × 1023 in standard notation.

Express the number 6.626 × 10−34 in standard notation.

When powers of 10 are multiplied together, the powers are added together. For example, 102 × 103 = 102+3 = 105. With this in mind, can you evaluate (4.506 × 104) × (1.003 × 102) without entering scientific notation into your calculator?

When powers of 10 are divided into each other, the bottom exponent is subtracted from the top exponent. For example, 105/103 = 105−3 = 102. With this in mind, can you evaluate (8.552 × 106) ÷ (3.129 × 103) without entering scientific notation into your calculator?

Consider the quantity two dozen eggs. Is the number in this quantity “two” or “two dozen”? Justify your choice.

Consider the quantity two dozen eggs. Is the unit in this quantity “eggs” or “dozen eggs”? Justify your choice.

Fill in the blank: 1 km = ______________ μm.

Fill in the blank: 1 Ms = ______________ ns.

Fill in the blank: 1 cL = ______________ ML.

Fill in the blank: 1 mg = ______________ kg.

Express 67.3 km/h in meters/second.

Express 0.00444 m/s in kilometers/hour.

Using the idea that 1.602 km = 1.000 mi, convert a speed of 60.0 mi/h into kilometers/hour.

Using the idea that 1.602 km = 1.000 mi, convert a speed of 60.0 km/h into miles/hour.

Convert 52.09 km/h into meters/second.

Convert 2.155 m/s into kilometers/hour.

Use the formulas for converting degrees Fahrenheit into degrees Celsius to determine the relative size of the Fahrenheit degree over the Celsius degree.

Use the formulas for converting degrees Celsius into kelvins to determine the relative size of the Celsius degree over kelvins.

What is the mass of 12.67 L of mercury?

What is the mass of 0.663 m3 of air?

What is the volume of 2.884 kg of gold?

What is the volume of 40.99 kg of cork? Assume a density of 0.22 g/cm3.

Answers

1.

3.42 × 10−183.

602,200,000,000,000,000,000,000

5.

4.520 × 1067.

The quantity is two; dozen is the unit.

9.

1,000,000,000

11.

1/100,000,000

13.

18.7 m/s

15.

96.1 km/h

17.

14.47 m/s

19.

One Fahrenheit degree is nine-fifths the size of a Celsius degree.

21.

1.72 × 105 g

23.

149 mL

PART II

Unit 2 Foundations of Chemistry

Chapter 11

Chapter 3. Atoms, Molecules, and Ions

Introduction to Atoms, Molecules, and Ions

Although not an SI unit, the angstrom (Å) is a useful unit of length. It is one ten-billionth of a meter, or 10−10 m. Why is it a useful unit? The ultimate particles that compose all matter are about 10−10 m in size, or about 1 Å. This makes the angstrom a natural—though not approved—unit for describing these particles.

The angstrom unit is named after Anders Jonas Ångström, a nineteenth-century Swedish physicist. Ångström’s research dealt with light being emitted by glowing objects, including the sun. Ångström studied the brightness of the different colors of light that the sun emitted and was able to deduce that the sun is composed of the same kinds of matter that are present on the earth. By extension, we now know that all matter throughout the universe is similar to the matter that exists on our own planet.

The basic building block of all matter is the atom. Curiously, the idea of atoms was first proposed in the fifth century BCE, when the Greek philosophers Leucippus and Democritus proposed their existence in a surprisingly modern fashion. However, their ideas never took hold among their contemporaries, and it wasn’t until the early 1800s that evidence amassed to make scientists reconsider the idea. Today, the concept of the atom is central to the study of matter.

Chapter 12

3.1 Atomic Theory

Learning Objectives

State the modern atomic theory.

Learn how atoms are constructed.

The smallest piece of an element that maintains the identity of that element is called an atom. Individual atoms are extremely small. It would take about fifty million atoms in a row to make a line that is 1 cm long. The period at the end of a printed sentence has several million atoms in it. Atoms are so small that it is difficult to believe that all matter is made from atoms—but it is.

The concept that atoms play a fundamental role in chemistry is formalized by the modern atomic theory, first stated by John Dalton, an English scientist, in 1808. It consists of three parts:

All matter is composed of atoms.

Atoms of the same element are the same; atoms of different elements are different.

Atoms combine in whole-number ratios to form compounds.

These concepts form the basis of chemistry.

Although the word atom comes from a Greek word that means “indivisible,” we understand now that atoms themselves are composed of smaller parts called subatomic particles. The first part to be discovered was the electron, a tiny subatomic particle with a negative charge. It is often represented as e−, with the right superscript showing the negative charge. Later, two larger particles were discovered. The proton is a more massive (but still tiny) subatomic particle with a positive charge, represented as p+. The neutron is a subatomic particle with about the same mass as a proton but no charge. It is represented as either n or n0. We now know that all atoms of all elements are composed of electrons, protons, and (with one exception) neutrons. Table 3.1 “Properties of the Three Subatomic Particles” summarizes the properties of these three subatomic particles.

Table 3.1 Properties of the Three Subatomic Particles

Name	Symbol	Mass (approx.; kg)	Charge
Proton	p +	1.6 × 10 −27	1+
Neutron	n, n 0	1.6 × 10 −27	none
Electron	e −	9.1 × 10 −31	1−

How are these particles arranged in atoms? They are not arranged at random. Experiments by Ernest Rutherford in England in the 1910s pointed to a nuclear model of the atom. The relatively massive protons and neutrons are collected in the center of an atom, in a region called the nucleus of the atom (plural nuclei). The electrons are outside the nucleus and spend their time orbiting in space about the nucleus. (See Figure 3.1 “The Structure of the Atom”.)

The modern atomic theory states that atoms of one element are the same, while atoms of different elements are different. What makes atoms of different elements different? The fundamental characteristic that all atoms of the same element share is the number of protons. All atoms of hydrogen have one and only one proton in the nucleus; all atoms of iron have 26 protons in the nucleus. This number of protons is so important to the identity of an atom that it is called the atomic number of the element. Thus, hydrogen has an atomic number of 1, while iron has an atomic number of 26. Each element has its own characteristic atomic number.

Atoms of the same element can have different numbers of neutrons, however. Atoms of the same element (i.e., atoms with the same number of protons) with different numbers of neutrons are called isotopes. Most naturally occurring elements exist as isotopes. For example, most hydrogen atoms have a single proton in their nucleus. However, a small number (about one in a million) of hydrogen atoms have a proton and a neutron in their nuclei. This particular isotope of hydrogen is called deuterium. A very rare form of hydrogen has one proton and two neutrons in the nucleus; this isotope of hydrogen is called tritium. The sum of the number of protons and neutrons in the nucleus is called the mass number of the isotope.

Neutral atoms have the same number of electrons as they have protons, so their overall charge is zero. However, as we shall see later, this will not always be the case.

Example 1 The most common carbon atoms have six protons and six neutrons in their nuclei. What are the atomic number and the mass number of these carbon atoms? An isotope of uranium has an atomic number of 92 and a mass number of 235. What are the number of protons and neutrons in the nucleus of this atom? Solution If a carbon atom has six protons in its nucleus, its atomic number is 6. If it also has six neutrons in the nucleus, then the mass number is 6 + 6, or 12. If the atomic number of uranium is 92, then that is the number of protons in the nucleus. Because the mass number is 235, then the number of neutrons in the nucleus is 235 − 92, or 143. Test Yourself The number of protons in the nucleus of a tin atom is 50, while the number of neutrons in the nucleus is 68. What are the atomic number and the mass number of this isotope? Answer Atomic number = 50, mass number = 118

When referring to an atom, we simply use the element’s name: the term sodium refers to the element as well as an atom of sodium. But it can be unwieldy to use the name of elements all the time. Instead, chemistry defines a symbol for each element. The atomic symbol is a one- or two-letter abbreviation of the name of the element. By convention, the first letter of an element’s symbol is always capitalized, while the second letter (if present) is lowercase. Thus, the symbol for hydrogen is H, the symbol for sodium is Na, and the symbol for nickel is Ni. Most symbols come from the English name of the element, although some symbols come from an element’s Latin name. (The symbol for sodium, Na, comes from its Latin name, natrium.) Table 3.2 “Names and Symbols of Common Elements” lists some common elements and their symbols. You should memorize the symbols in Table 3.2 “Names and Symbols of Common Elements”, as this is how we will be representing elements throughout chemistry.

Table 3.2 Names and Symbols of Common Elements

Element Name	Symbol	Element Name	Symbol
Aluminum	Al	Mercury	Hg
Argon	Ar	Molybdenum	Mo
Arsenic	As	Neon	Ne
Barium	Ba	Nickel	Ni
Beryllium	Be	Nitrogen	N
Bismuth	Bi	Oxygen	O
Boron	B	Palladium	Pd
Bromine	Br	Phosphorus	P
Calcium	Ca	Platinum	Pt
Carbon	C	Potassium	K
Chlorine	Cl	Radium	Ra
Chromium	Cr	Radon	Rn
Cobalt	Co	Rubidium	Rb
Copper	Cu	Scandium	Sc
Fluorine	F	Selenium	Se
Gallium	Ga	Silicon	Si
Germanium	Ge	Silver	Ag
Gold	Au	Sodium	Na
Helium	He	Strontium	Sr
Hydrogen	H	Sulfur	S
Iodine	I	Tantalum	Ta
Iridium	Ir	Tin	Sn
Iron	Fe	Titanium	Ti
Krypton	Kr	Tungsten	W
Lead	Pb	Uranium	U
Lithium	Li	Xenon	Xe
Magnesium	Mg	Zinc	Zn
Manganese	Mn	Zirconium	Zr

The elements are grouped together in a special chart called the periodic table. A simple periodic table is shown in Figure 3.2 “A Simple Periodic Table”, while a more extensive one is presented in the Appendix: Periodic Table of the Elements. The elements on the periodic table are listed in order of ascending atomic number. The periodic table has a special shape that will become important to us when we consider the organization of electrons in atoms (see Chapter 4 “Electronic Structure”). One immediate use of the periodic table helps us identify metals and nonmetals. Nonmetals are in the upper right corner of the periodic table, on one side of the heavy line splitting the right-hand part of the chart. All other elements are metals.

Figure 3.2 A Simple Periodic Table. View an

.

There is an easy way to represent isotopes using the atomic symbols. We use the construction

where X is the symbol of the element, A is the mass number, and Z is the atomic number. Thus, for the isotope of carbon that has 6 protons and 6 neutrons, the symbol is

where C is the symbol for the element, 6 represents the atomic number, and 12 represents the mass number.

Example 2 What is the symbol for an isotope of uranium that has an atomic number of 92 and a mass number of 235? How many protons and neutrons are in 26F? Solution The symbol for this isotope is 92U. This iron atom has 26 protons and 56 − 26 = 30 neutrons. Test Yourself How many protons are in 11N? Answer 11 protons

It is also common to state the mass number after the name of an element to indicate a particular isotope. Carbon-12 represents an isotope of carbon with 6 protons and 6 neutrons, while uranium-238 is an isotope of uranium that has 146 neutrons.

Key Takeaways

Chemistry is based on the modern atomic theory, which states that all matter is composed of atoms.

Atoms themselves are composed of protons, neutrons, and electrons.

Each element has its own atomic number, which is equal to the number of protons in its nucleus.

Isotopes of an element contain different numbers of neutrons.

Elements are represented by an atomic symbol.

The periodic table is a chart that organizes all the elements.

Exercises List the three statements that make up the modern atomic theory. Explain how atoms are composed. Which is larger, a proton or an electron? Which is larger, a neutron or an electron? What are the charges for each of the three subatomic particles? Where is most of the mass of an atom located? Sketch a diagram of a boron atom, which has five protons and six neutrons in its nucleus. Sketch a diagram of a helium atom, which has two protons and two neutrons in its nucleus. Define atomic number. What is the atomic number for a boron atom? What is the atomic number of helium? Define isotope and give an example. What is the difference between deuterium and tritium? Which pair represents isotopes? a) b) 26F and 25M c) 14S and 15P 14. Which pair represents isotopes? a) 20C and 19K b) 26F and 26F c) 92U and 92U 15. Give complete symbols of each atom, including the atomic number and the mass number. a) an oxygen atom with 8 protons and 8 neutrons b) a potassium atom with 19 protons and 20 neutrons c) a lithium atom with 3 protons and 4 neutrons 16. Give complete symbols of each atom, including the atomic number and the mass number. a) a magnesium atom with 12 protons and 12 neutrons b) a magnesium atom with 12 protons and 13 neutrons c) a xenon atom with 54 protons and 77 neutrons 17. Americium-241 is an isotope used in smoke detectors. What is the complete symbol for this isotope? 18. Carbon-14 is an isotope used to perform radioactive dating tests on previously living material. What is the complete symbol for this isotope? 19. Give atomic symbols for each element. a) sodium b) argon c) nitrogen d) radon 20. Give atomic symbols for each element. a) silver b) gold c) mercury d) iodine 21. Give the name of the element. a) Si b) Mn c) Fe d) Cr 22. Give the name of the element. a) F b) Cl c) Br d) I Answers 1. All matter is composed of atoms; atoms of the same element are the same, and atoms of different elements are different; atoms combine in whole-number ratios to form compounds. 3. A proton is larger than an electron. 5. proton: 1+; electron: 1−; neutron: 0 7. 9. The atomic number is the number of protons in a nucleus. Boron has an atomic number of five. 11. Isotopes are atoms of the same element but with different numbers of neutrons. are examples. 13. a) isotopes b) not isotopes c) not isotopes 15. a) b) 19K c) 17. 95A 19. a) Na b) Ar c) N d) Rn 21. a) silicon b) manganese c) iron d) chromium

Chapter 13

3.2 Molecules and Chemical Nomenclature

Learning Objectives

Define molecule.

Name simple molecules based on their formulas.

Determine a formula of a molecule based on its name.

There are many substances that exist as two or more atoms connected together so strongly that they behave as a single particle. These multiatom combinations are called molecules. A molecule is the smallest part of a substance that has the physical and chemical properties of that substance. In some respects, a molecule is similar to an atom. A molecule, however, is composed of more than one atom.

Some elements exist naturally as molecules. For example, hydrogen and oxygen exist as two-atom molecules. Other elements also exist naturally as diatomic molecules (see “Elements That Exist as Diatomic Molecules”). As with any molecule, these elements are labelled with a molecular formula, a formal listing of what and how many atoms are in a molecule. (Sometimes only the word formula is used, and its meaning is inferred from the context.) For example, the molecular formula for elemental hydrogen is H2, with H being the symbol for hydrogen and the subscript 2 implying that there are two atoms of this element in the molecule. Other diatomic elements have similar formulas: O2, N2, and so forth. Other elements exist as molecules—for example, sulfur normally exists as an eight-atom molecule, S8, while phosphorus exists as a four-atom molecule, P4 (see Figure 3.3 “Molecular Art of S”). Otherwise, we will assume that elements exist as individual atoms, rather than molecules. It is assumed that there is only one atom in a formula if there is no numerical subscript on the right side of an element’s symbol.

Elements that Exist as Diatomic Molecules The following is a list of elements that exist as diatomic molecules: hydrogen oxygen nitrogen fluorine chlorine bromine iodine

Figure 3.3 Molecular Art of S8 and P4 Molecules. If each green ball represents a sulfur atom, then the diagram on the left represents an S

molecule. The molecule on the right shows that one form of elemental phosphorus exists, as a four-atom molecule.

Figure 3.3 “Molecular Art of S” shows two examples of how we will be representing molecules in this text. An atom is represented by a small ball or sphere, which generally indicates where the nucleus is in the molecule. A cylindrical line connecting the balls represents the connection between the atoms that make this collection of atoms a molecule. This connection is called a chemical bond. In Chapter 10 “Chemical Bonds”, we will explore the origin of chemical bonds. You will see other examples of this “ball and cylinder” representation of molecules throughout this book.

Many compounds exist as molecules. In particular, when nonmetals connect with other nonmetals, the compound typically exists as molecules. (Compounds between a metal and a nonmetal are different and will be considered in Section 3.4 “Ions and Ionic Compounds”.) Furthermore, in some cases there are many different kinds of molecules that can be formed between any given elements, with all the different molecules having different chemical and physical properties. How do we tell them apart?

The answer is a very specific system of naming compounds, called chemical nomenclature. By following the rules of nomenclature, each and every compound has its own unique name, and each name refers to one and only one compound. Here, we will start with relatively simple molecules that have only two elements in them, the so-called binary compounds:

Identify the elements in the molecule from its formula. This is why you need to know the names and symbols of the elements in Table 3.2 “Names and Symbols of Common Elements”.

Begin the name with the element name of the first element. If there is more than one atom of this element in the molecular formula, use a numerical prefix to indicate the number of atoms, as listed in Table 3.4 “Numerical Prefixes Used in Naming Molecular Compounds”. Do not use the prefix mono- if there is only one atom of the first element.

Table 3.4 Numerical Prefixes Used in Naming Molecular Compounds

The Number of Atoms of an Element	Prefix
1	mono-
2	di-
3	tri-
4	tetra-
5	penta-
6	hexa-
7	hepta-
8	octa-
9	nona-
10	deca-

Name the second element by using three pieces:

a numerical prefix indicating the number of atoms of the second element, plus

the stem of the element name (e.g., ox for oxygen, chlor for chlorine, etc.), plus

the suffix -ide.

Combine the two words, leaving a space between them.

Let us see how these steps work for a molecule whose molecular formula is SO2, which has one sulfur atom and two oxygen atoms—this completes step 1. According to step 2, we start with the name of the first element—sulfur. Remember, we don’t use the mono- prefix for the first element. Now for step 3, we combine the numerical prefix di- (see Table 3.4 “Numerical Prefixes Used in Naming Molecular Compounds”) with the stem ox- and the suffix -ide, to make dioxide. Bringing these two words together, we have the unique name for this compound—sulfur dioxide.

Why all this trouble? There is another common compound consisting of sulfur and oxygen whose molecular formula is SO3, so the compounds need to be distinguished. SO3 has three oxygen atoms in it, so it is a different compound with different chemical and physical properties. The system of chemical nomenclature is designed to give this compound its own unique name. Its name, if you go through all the steps, is sulfur trioxide. Different compounds have different names.

In some cases, when a prefix ends in a or o and the element name begins with o we drop the a or o on the prefix. So we see monoxide or pentoxide rather than monooxide or pentaoxide in molecule names.

One great thing about this system is that it works both ways. From the name of a compound, you should be able to determine its molecular formula. Simply list the element symbols, with a numerical subscript if there is more than one atom of that element, in the order of the name (we do not use a subscript 1 if there is only one atom of the element present; 1 is implied). From the name nitrogen trichloride, you should be able to get NCl3 as the formula for this molecule. From the name diphosphorus pentoxide, you should be able to get the formula P2O5 (note the numerical prefix on the first element, indicating there is more than one atom of phosphorus in the formula).

Example 3 Name each molecule. PF3 CO Se2Br2 Solution A molecule with a single phosphorus atom and three fluorine atoms is called phosphorus trifluoride. A compound with one carbon atom and one oxygen atom is properly called carbon monoxide, not carbon monooxide. There are two atoms of each element, selenium and bromine. According to the rules, the proper name here is diselenium dibromide. Test Yourself Name each molecule. SF4 P2S5 Answers sulfur tetrafluoride diphosphorus pentasulfide

Example 4 Give the formula for each molecule. carbon tetrachloride silicon dioxide trisilicon tetranitride Solution The name carbon tetrachloride implies one carbon atom and four chlorine atoms, so the formula is CCl4. The name silicon dioxide implies one silicon atom and two oxygen atoms, so the formula is SiO2. We have a name that has numerical prefixes on both elements. Tri- means three, and tetra- means four, so the formula of this compound is Si3N4. Test Yourself Give the formula for each molecule. disulfur difluoride iodine pentabromide Answers S2F2 IBr5

Some simple molecules have common names that we use as part of the formal system of chemical nomenclature. For example, H2O is given the name water, not dihydrogen monoxide. NH3 is called ammonia, while CH4 is called methane. We will occasionally see other molecules that have common names; we will point them out as they occur.

Key Takeaways

Molecules are groups of atoms that behave as a single unit.

Some elements exist as molecules: hydrogen, oxygen, sulfur, and so forth.

There are rules that can express a unique name for any given molecule, and a unique formula for any given name.

Exercises

Which of these formulas represent molecules? State how many atoms are in each molecule.

a) Fe

b) PCl3

c) P4

d) Ar

2. Which of these formulas represent molecules? State how many atoms are in each molecule.

a) I2

b) He

c) H2O

d) Al

3. What is the difference between CO and Co?

4. What is the difference between H2O and H2O2 (hydrogen peroxide)?

5. Give the proper formula for each diatomic element.

6. In 1986, when Halley’s comet last passed the earth, astronomers detected the presence of S2 in their telescopes. Why is sulfur not considered a diatomic element?

7. What is the stem of fluorine used in molecule names? CF4 is one example.

8. What is the stem of selenium used in molecule names? SiSe2 is an example.

9. Give the proper name for each molecule.

a) PF3

b) TeCl2

c) N2O3

10. Give the proper name for each molecule.

a) NO

b) CS2

c) As2O3

11. Give the proper name for each molecule.

a) XeF2

b) O2F2

c) SF6

12. Give the proper name for each molecule.

a) P4O10

b) B2O3

c) P2S3

13. Give the proper name for each molecule.

a) N2O

b) N2O4

c) N2O5

14. Give the proper name for each molecule.

a) SeO2

b) Cl2O

c) XeF6

15. Give the proper formula for each name.

a) dinitrogen pentoxide

b) tetraboron tricarbide

c) phosphorus pentachloride

16. Give the proper formula for each name.

a) nitrogen triiodide

b) diarsenic trisulfide

c) iodine trichloride

17. Give the proper formula for each name.

a) dioxygen dichloride

b) dinitrogen trisulfide

c) xenon tetrafluoride

18. Give the proper formula for each name.

a) chlorine dioxide

b) selenium dibromide

c) dinitrogen trioxide

19. Give the proper formula for each name.

a) iodine trifluoride

b) xenon trioxide

c) disulfur decafluoride

20. Give the proper formula for each name.

a) germanium dioxide

b) carbon disulfide

c) diselenium dibromide

Answers

1.

a) not a molecule

b) a molecule; four atoms total

c) a molecule; four atoms total

d) not a molecule

3.

CO is a compound of carbon and oxygen; Co is the element cobalt.

5.

H2, O2, N2, F2, Cl2, Br2, I27.

fluor-

9.

a) phosphorus trifluoride

b) tellurium dichloride

c) dinitrogen trioxide

11.

a) xenon difluoride

b) dioxygen difluoride

c) sulfur hexafluoride

13.

a) dinitrogen monoxide

b) dinitrogen tetroxide

c) dinitrogen pentoxide

15.

a) N2O5

b) B4C3

c) PCl517.

a) O2Cl2

b) N2S3

c) XeF419.

a) IF3

b) XeO3

c) S2F10

Chapter 14

3.3 Masses of Atoms and Molecules

Learning Objective

1. Express the masses of atoms and molecules.

Because matter is defined as anything that has mass and takes up space, it should not be surprising to learn that atoms and molecules have mass.

Individual atoms and molecules, however, are very small, and the masses of individual atoms and molecules are also very small. For macroscopic objects, we use units such as grams and kilograms to state their masses, but these units are much too big to comfortably describe the masses of individual atoms and molecules. Another scale is needed.

The atomic mass unit (u; some texts use amu, but this older style is no longer accepted) is defined as one-twelfth of the mass of a carbon-12 atom, an isotope of carbon that has six protons and six neutrons in its nucleus. By this scale, the mass of a proton is 1.00728 u, the mass of a neutron is 1.00866 u, and the mass of an electron is 0.000549 u. There will not be much error if you estimate the mass of an atom by simply counting the total number of protons and neutrons in the nucleus (i.e., identify its mass number) and ignore the electrons. Thus, the mass of carbon-12 is about 12 u, the mass of oxygen-16 is about 16 u, and the mass of uranium-238 is about 238 u. More exact masses are found in scientific references—for example, the exact mass of uranium-238 is 238.050788 u, so you can see that we are not far off by using the whole-number value as the mass of the atom.

What is the mass of an element? This is somewhat more complicated because most elements exist as a mixture of isotopes, each of which has its own mass. Thus, although it is easy to speak of the mass of an atom, when talking about the mass of an element, we must take the isotopic mixture into account.

The atomic mass of an element is a weighted average of the masses of the isotopes that compose an element. What do we mean by a weighted average? Well, consider an element that consists of two isotopes, 50% with mass 10 u and 50% with mass 11 u. A weighted average is found by multiplying each mass by its fractional occurrence (in decimal form) and then adding all the products. The sum is the weighted average and serves as the formal atomic mass of the element. In this example, we have the following:

0.50 × 10 u	= 5.0 u
0.50 × 11 u	= 5.5 u
Sum	= 10.5 u = the atomic mass of our element

Note that no atom in our hypothetical element has a mass of 10.5 u; rather, that is the average mass of the atoms, weighted by their percent occurrence.

This example is similar to a real element. Boron exists as about 20% boron-10 (five protons and five neutrons in the nuclei) and about 80% boron-11 (five protons and six neutrons in the nuclei). The atomic mass of boron is calculated similarly to what we did for our hypothetical example, but the percentages are different:

0.20 × 10 u	= 2.0 u
0.80 × 11 u	= 8.8 u
Sum	= 10.8 u = the atomic mass of boron

Thus, we use 10.8 u for the atomic mass of boron.

Virtually all elements exist as mixtures of isotopes, so atomic masses may vary significantly from whole numbers. Table 3.5 “Selected Atomic Masses of Some Elements” lists the atomic masses of some elements; a more expansive table is in “Appendix: Periodic Table of the Elements”. The atomic masses in Table 3.5 “Selected Atomic Masses of Some Elements” are listed to three decimal places where possible, but in most cases, only one or two decimal places are needed. Note that many of the atomic masses, especially the larger ones, are not very close to whole numbers. This is, in part, the effect of an increasing number of isotopes as the atoms increase in size. (The record number is 10 isotopes for tin.)

Table 3.5 Selected Atomic Masses of Some Elements

Element Name	Atomic Mass (u)	Element Name	Atomic Mass (u)
Aluminum	26.981	Molybdenum	95.94
Argon	39.948	Neon	20.180
Arsenic	74.922	Nickel	58.693
Barium	137.327	Nitrogen	14.007
Beryllium	9.012	Oxygen	15.999
Bismuth	208.980	Palladium	106.42
Boron	10.811	Phosphorus	30.974
Bromine	79.904	Platinum	195.084
Calcium	40.078	Potassium	39.098
Carbon	12.011	Radium	n/a
Chlorine	35.453	Radon	n/a
Cobalt	58.933	Rubidium	85.468
Copper	63.546	Scandium	44.956
Fluorine	18.998	Selenium	78.96
Gallium	69.723	Silicon	28.086
Germanium	72.64	Silver	107.868
Gold	196.967	Sodium	22.990
Helium	4.003	Strontium	87.62
Hydrogen	1.008	Sulfur	32.065
Iodine	126.904	Tantalum	180.948
Iridium	192.217	Tin	118.710
Iron	55.845	Titanium	47.867
Krypton	83.798	Tungsten	183.84
Lead	207.2	Uranium	238.029
Lithium	6.941	Xenon	131.293
Magnesium	24.305	Zinc	65.409
Manganese	54.938	Zirconium	91.224
Mercury	200.59	Molybdenum	95.94
Note: Atomic mass is given to three decimal places, if known.

Now that we understand that atoms have mass, it is easy to extend the concept to the mass of molecules. The molecular mass is the sum of the masses of the atoms in a molecule. This may seem like a trivial extension of the concept, but it is important to count the number of each type of atom in the molecular formula. Also, although each atom in a molecule is a particular isotope, we use the weighted average, or atomic mass, for each atom in the molecule.

For example, if we were to determine the molecular mass of dinitrogen trioxide, N2O3, we would need to add the atomic mass of nitrogen two times with the atomic mass of oxygen three times:

2 N masses = 2 × 14.007 u	= 28.014 u
3 O masses = 3 × 15.999 u	= 47.997 u
Total	= 76.011 u = the molecular mass of N 2 O 3

We would not be far off if we limited our numbers to one or even two decimal places.

Example 5 What is the molecular mass of each substance? NBr3 C2H6 Solution Add one atomic mass of nitrogen and three atomic masses of bromine:	1 N mass	= 14.007 u
3 Br masses = 3 × 79.904 u	= 239.712 u
Total	= 253.719 u = the molecular mass of NBr3
Add two atomic masses of carbon and six atomic masses of hydrogen:	2 C masses = 2 × 12.011 u	= 24.022 u
6 H masses = 6 × 1.008 u	= 6.048 u
Total	= 30.070 u = the molecular mass of C2H6
The compound C2H6 also has a common name—ethane. Test Yourself What is the molecular mass of each substance? SO2 PF3 Answers 64.063 u 87.968 u

Chemistry Is Everywhere: Sulfur Hexafluoride

On March 20, 1995, the Japanese terrorist group Aum Shinrikyo (Sanskrit for “Supreme Truth”) released some sarin gas in the Tokyo subway system; twelve people were killed, and thousands were injured (part (a) in the accompanying figure). Sarin (molecular formula C4H10FPO2) is a nerve toxin that was first synthesized in 1938. It is regarded as one of the most deadly toxins known, estimated to be about 500 times more potent than cyanide. Scientists and engineers who study the spread of chemical weapons such as sarin (yes, there are such scientists) would like to have a less dangerous chemical, indeed one that is nontoxic, so they are not at risk themselves.

Sulfur hexafluoride is used as a model compound for sarin. SF6 (a molecular model of which is shown in part (b) in the accompanying figure) has a similar molecular mass (about 146 u) as sarin (about 140 u), so it has similar physical properties in the vapour phase. Sulfur hexafluoride is also very easy to accurately detect, even at low levels, and it is not a normal part of the atmosphere, so there is little potential for contamination from natural sources. Consequently, SF6 is also used as an aerial tracer for ventilation systems in buildings. It is nontoxic and very chemically inert, so workers do not have to take special precautions other than watching for asphyxiation.

Sulfur hexafluoride also has another interesting use: a spark suppressant in high-voltage electrical equipment. High-pressure SF6 gas is used in place of older oils that may have contaminants that are environmentally unfriendly (part (c) in the accompanying figure).

Key Takeaways

The atomic mass unit (u) is a unit that describes the masses of individual atoms and molecules.

The atomic mass is the weighted average of the masses of all isotopes of an element.

The molecular mass is the sum of the masses of the atoms in a molecule.

Exercises

Define atomic mass unit. What is its abbreviation?

Define atomic mass. What is its unit?

Estimate the mass, in whole numbers, of each isotope.

a) hydrogen-1

b) hydrogen-3

c) iron-56

4. Estimate the mass, in whole numbers, of each isotope.

a) phosphorus-31

b) carbon-14

c) americium-241

5. Determine the atomic mass of each element, given the isotopic composition.

a) lithium, which is 92.4% lithium-7 (mass 7.016 u) and 7.60% lithium-6 (mass 6.015 u)

b) oxygen, which is 99.76% oxygen-16 (mass 15.995 u), 0.038% oxygen-17 (mass 16.999 u), and 0.205% oxygen-18 (mass 17.999 u)

6. Determine the atomic mass of each element, given the isotopic composition.

a) neon, which is 90.48% neon-20 (mass 19.992 u), 0.27% neon-21 (mass 20.994 u), and 9.25% neon-22 (mass 21.991 u)

b) uranium, which is 99.27% uranium-238 (mass 238.051 u) and 0.720% uranium-235 (mass 235.044 u)

7. How far off would your answer be from Exercise 5a if you used whole-number masses for individual isotopes of lithium?

8. How far off would your answer be from Exercise 6b if you used whole-number masses for individual isotopes of uranium?

9. What is the atomic mass of an oxygen atom?

10. What is the molecular mass of oxygen in its elemental form?

11. What is the atomic mass of bromine?

12. What is the molecular mass of bromine in its elemental form?

13. Determine the mass of each substance.

a) F2

b) CO

c) CO2

14. Determine the mass of each substance.

a) Kr

b) KrF4

c) PF5

15. Determine the mass of each substance.

a) Na

b) B2O3

c) S2Cl2

16. Determine the mass of each substance.

a) IBr3

b) N2O5

c) CCl4

17. Determine the mass of each substance.

a) GeO2

b) IF3

c) XeF6

18. Determine the mass of each substance.

a) NO

b) N2O4

c) Ca

Answers

1.

The atomic mass unit is defined as one-twelfth of the mass of a carbon-12 atom. Its abbreviation is u.

3.

a) 1

b) 3

c) 56

5.

a) 6.940 u

b) 16.000 u

7.

We would get 6.924 u.

9.

a) 15.999 u

b) 31.998 u

11.

a) 37.996 u

b) 28.010 u

c) 44.009 u

13.

a) 22.990 u

b) 69.619 u

c) 135.036 u

15.

a) 104.64 u

b) 183.898 u

c) 245.281 u

Chapter 15

3.4 Ions and Ionic Compounds

Learning Objectives

Know how ions form.

Learn the characteristic charges that ions have.

Construct a proper formula for an ionic compound.

Generate a proper name for an ionic compound.

So far, we have discussed elements and compounds that are electrically neutral. They have the same number of electrons as protons, so the negative charges of the electrons is balanced by the positive charges of the protons. However, this is not always the case. Electrons can move from one atom to another; when they do, species with overall electric charges are formed. Such species are called ions. Species with overall positive charges are termed cations, while species with overall negative charges are called anions. Remember that ions are formed only when electrons move from one atom to another; a proton never moves from one atom to another. Compounds formed from positive and negative ions are called ionic compounds.

Individual atoms can gain or lose electrons. When they do, they become monatomic ions. When atoms gain or lose electrons, they usually gain or lose a characteristic number of electrons and so take on a characteristic overall charge. Table 3.6 “Monatomic Ions of Various Charges” lists some common ions in terms of how many electrons they lose (making cations) or gain (making anions). There are several things to notice about the ions in Table 3.6 “Monatomic Ions of Various Charges”. First, each element that forms cations is a metal, except for one (hydrogen), while each element that forms anions is a nonmetal. This is actually one of the chemical properties of metals and nonmetals: metals tend to form cations, while nonmetals tend to form anions. Second, most atoms form ions of a single characteristic charge. When sodium atoms form ions, they always form a 1+ charge, never a 2+ or 3+ or even 1− charge. Thus, if you commit the information in Table 3.6 “Monatomic Ions of Various Charges” to memory, you will always know what charges most atoms form. (In Chapter 10 “Chemical Bonds”, we will discuss why atoms form the charges they do.)

Table 3.6 Monatomic Ions of Various Charges

Ions formed by losing a single electron	H +
Na +
K +
Rb +
Ag +
Au +
Ions formed by losing two electrons	Mg 2+
Ca 2+
Sr 2+
Fe 2+
Co 2+
Ni 2+
Cu 2+
Zn 2+
Sn 2+
Hg 2+
Pb 2+
Ions formed by losing three electrons	Sc 3+
Fe 3+
Co 3+
Ni 3+
Au 3+
Al 3+
Cr 3+
Ions formed by losing four electrons	Ti 4+
Sn 4+
Pb 4+
Ions formed by gaining a single electron	F −
Cl −
Br −
I −
Ions formed by gaining two electrons	O 2−
S 2−
Se 2−
Ions formed by gaining three electrons	N 3−
P 3−

Third, there are some exceptions to the previous point. A few elements, all metals, can form more than one possible charge. For example, iron atoms can form 2+ cations or 3+ cations. Cobalt is another element that can form more than one possible charged ion (2+ and 3+), while lead can form 2+ or 4+ cations. Unfortunately, there is little understanding which two charges a metal atom may take, so it is best to just memorize the possible charges a particular element can have.

Note the convention for indicating an ion. The magnitude of the charge is listed as a right superscript next to the symbol of the element. If the charge is a single positive or negative one, the number 1 is not written; if the magnitude of the charge is greater than 1, then the number is written before the + or − sign. An element symbol without a charge written next to it is assumed to be the uncharged atom.

Naming an ion is straightforward. For a cation, simply use the name of the element and add the word ion (or if you want to be more specific, add cation) after the element’s name. So Na+ is the sodium ion; Ca2+ is the calcium ion. If the element has more than one possible charge, the value of the charge comes after the element name and before the word ion. Thus, Fe2+ is the iron two ion, while Fe3+ is the iron three ion. In print, we use roman numerals in parentheses to represent the charge on the ion, so these two iron ions would be represented as the iron(II) cation and the iron(III) cation, respectively.

For a monatomic anion, use the stem of the element name and append the suffix -ide to it, and then add ion. This is similar to how we named molecular compounds. Thus, Cl− is the chloride ion, and N3− is the nitride ion.

Example 6 Name each species. O2− Co Co2+ Solution This species has a 2− charge on it, so it is an anion. Anions are named using the stem of the element name with the suffix -ide added. This is the oxide anion. Because this species has no charge, it is an atom in its elemental form. This is cobalt. In this case, there is a 2+ charge on the atom, so it is a cation. We note from Table 3.6 “Monatomic Ions of Various Charges” that cobalt cations can have two possible charges, so the name of the ion must specify which charge the ion has. This is the cobalt(II) cation. Test Yourself Name each species. P3− Sr2+ Answers the phosphide anion the strontium cation

Chemical formulas for ionic compounds are called ionic formulas. A proper ionic formula has a cation and an anion in it; an ionic compound is never formed between two cations only or two anions only. The key to writing proper ionic formulas is simple: the total positive charge must balance the total negative charge. Because the charges on the ions are characteristic, sometimes we have to have more than one of a cation or an anion to balance the overall positive and negative charges. It is conventional to use the lowest ratio of ions that are needed to balance the charges.

For example, consider the ionic compound between Na+ and Cl−. Each ion has a single charge, one positive and one negative, so we need only one ion of each to balance the overall charge. When writing the ionic formula, we follow two additional conventions: (1) write the formula for the cation first and the formula for the anion next, but (2) do not write the charges on the ions. Thus, for the compound between Na+ and Cl−, we have the ionic formula NaCl (Figure 3.5 “NaCl = Table Salt”). The formula Na2Cl2 also has balanced charges, but the convention is to use the lowest ratio of ions, which would be one of each. (Remember from our conventions for writing formulas that we don’t write a 1 subscript if there is only one atom of a particular element present.) For the ionic compound between magnesium cations (Mg2+) and oxide anions (O2−), again we need only one of each ion to balance the charges. By convention, the formula is MgO.

NaCl = Table Salt. The ionic compound NaCl is very common. Source: “Kosher Salt” by stlbites.com is licensed under the Creative Commons Attribution-NoDerivs 2.0 Generic.

For the ionic compound between Mg2+ ions and Cl− ions, we now consider the fact that the charges have different magnitudes, 2+ on the magnesium ion and 1− on the chloride ion. To balance the charges with the lowest number of ions possible, we need to have two chloride ions to balance the charge on the one magnesium ion. Rather than write the formula MgClCl, we combine the two chloride ions and write it with a 2 subscript: MgCl2.

What is the formula MgCl2 telling us? There are two chloride ions in the formula. Although chlorine as an element is a diatomic molecule, Cl2, elemental chlorine is not part of this ionic compound. The chlorine is in the form of a negatively charged ion, not the neutral element. The 2 subscript is in the ionic formula because we need two Cl− ions to balance the charge on one Mg2+ ion.

Example 7 Write the proper ionic formula for each of the two given ions. Ca2+ and Cl− Al3+ and F− Al3+ and O2− Solution We need two Cl− ions to balance the charge on one Ca2+ ion, so the proper ionic formula is CaCl2. We need three F− ions to balance the charge on the Al3+ ion, so the proper ionic formula is AlF3. With Al3+ and O2−, note that neither charge is a perfect multiple of the other. This means we have to go to a least common multiple, which in this case will be six. To get a total of 6+, we need two Al3+ ions; to get 6−, we need three O2− ions. Hence the proper ionic formula is Al2O3. Test Yourself Write the proper ionic formulas for each of the two given ions. Fe2+ and S2− Fe3+ and S2− Answers FeS Fe2S3

Naming ionic compounds is simple: combine the name of the cation and the name of the anion, in both cases omitting the word ion. Do not use numerical prefixes if there is more than one ion necessary to balance the charges. NaCl is sodium chloride, a combination of the name of the cation (sodium) and the anion (chloride). MgO is magnesium oxide. MgCl2 is magnesium chloride—not magnesium dichloride.

In naming ionic compounds whose cations can have more than one possible charge, we must also include the charge, in parentheses and in roman numerals, as part of the name. Hence FeS is iron(II) sulfide, while Fe2S3 is iron(III) sulfide. Again, no numerical prefixes appear in the name. The number of ions in the formula is dictated by the need to balance the positive and negative charges.

Example 8 Name each ionic compound. CaCl2 AlF3 Co2O3 Solution Using the names of the ions, this ionic compound is named calcium chloride. It is not calcium(II) chloride because calcium forms only one cation when it forms an ion, and it has a characteristic charge of 2+. The name of this ionic compound is aluminum fluoride. We know that cobalt can have more than one possible charge; we just need to determine what it is. Oxide always has a 2− charge, so with three oxide ions, we have a total negative charge of 6−. This means that the two cobalt ions have to contribute 6+, which for two cobalt ions means that each one is 3+. Therefore, the proper name for this ionic compound is cobalt(III) oxide. Test Yourself Name each ionic compound. Sc2O3 AgCl Answers scandium oxide silver chloride

How do you know whether a formula—and by extension, a name—is for a molecular compound or for an ionic compound? Molecular compounds form between nonmetals and nonmetals, while ionic compounds form between metals and nonmetals. The periodic table (Figure 3.2 “A Simple Periodic Table”) can be used to determine which elements are metals and nonmetals.

There also exists a group of ions that contain more than one atom. These are called polyatomic ions. Table 3.7 “Common Polyatomic Ions” lists the formulas, charges, and names of some common polyatomic ions. Only one of them, the ammonium ion, is a cation; the rest are anions. Most of them also contain oxygen atoms, so sometimes they are referred to as oxyanions. Some of them, such as nitrate and nitrite, and sulfate and sulfite, have very similar formulas and names, so care must be taken to get the formulas and names correct. Note that the -ite polyatomic ion has one less oxygen atom in its formula than the -ate ion but with the same ionic charge.

Table 3.7 Common Polyatomic Ions

Name	Formula and Charge	Name	Formula and Charge
ammonium	NH 4+	hydroxide	OH −
acetate	C 2 H 3 O 2− , or CH 3 COO −	nitrate	NO 3−
bicarbonate (hydrogen carbonate)	HCO 3−	nitrite	NO 2−
bisulfate (hydrogen sulfate)	HSO 4−	peroxide	O 22−
carbonate	CO 32−	perchlorate	ClO 4−
chlorate	ClO 3−	phosphate	PO 43−
chromate	CrO 42−	sulfate	SO 42−
cyanide	CN −	sulfite	SO 32−
dichromate	Cr 2 O 72−	triiodide	I 3−

The naming of ionic compounds that contain polyatomic ions follows the same rules as the naming for other ionic compounds: simply combine the name of the cation and the name of the anion. Do not use numerical prefixes in the name if there is more than one polyatomic ion; the only exception to this is if the name of the ion itself contains a numerical prefix, such as dichromate or triiodide.

Writing the formulas of ionic compounds has one important difference. If more than one polyatomic ion is needed to balance the overall charge in the formula, enclose the formula of the polyatomic ion in parentheses and write the proper numerical subscript to the right and outside the parentheses. Thus, the formula between calcium ions, Ca2+, and nitrate ions, NO3−, is properly written Ca(NO3)2, not CaNO32 or CaN2O6. Use parentheses where required. The name of this ionic compound is simply calcium nitrate.

Example 9 Write the proper formula and give the proper name for each ionic compound formed between the two listed ions. NH4+ and S2− Al3+ and PO43− Fe2+ and PO43− Solution Because the ammonium ion has a 1+ charge and the sulfide ion has a 2− charge, we need two ammonium ions to balance the charge on a single sulfide ion. Enclosing the formula for the ammonium ion in parentheses, we have (NH4)2S. The compound’s name is ammonium sulfide. Because the ions have the same magnitude of charge, we need only one of each to balance the charges. The formula is AlPO4, and the name of the compound is aluminum phosphate. Neither charge is an exact multiple of the other, so we have to go to the least common multiple of 6. To get 6+, we need three iron(II) ions, and to get 6−, we need two phosphate ions. The proper formula is Fe3(PO4)2, and the compound’s name is iron(II) phosphate. Test Yourself Write the proper formula and give the proper name for each ionic compound formed between the two listed ions. NH4+ and PO43− Co3+ and NO2− Answers (NH4)3PO4, ammonium phosphate Co(NO2)3, cobalt(III) nitrite

Food and Drink App: Sodium in Your Food

The element sodium, at least in its ionic form as Na+, is a necessary nutrient for humans to live. In fact, the human body is approximately 0.15% sodium, with the average person having one-twentieth to one-tenth of a kilogram in their body at any given time, mostly in fluids outside cells and in other bodily fluids.

Sodium is also present in our diet. The common table salt we use on our foods is an ionic sodium compound. Many processed foods also contain significant amounts of sodium added to them as a variety of ionic compounds. Why are sodium compounds used so much? Usually sodium compounds are inexpensive, but, more importantly, most ionic sodium compounds dissolve easily. This allows processed food manufacturers to add sodium-containing substances to food mixtures and know that the compound will dissolve and distribute evenly throughout the food. Simple ionic compounds such as sodium nitrite (NaNO2) are added to cured meats, such as bacon and deli-style meats, while a compound called sodium benzoate is added to many packaged foods as a preservative. Table 3.8 “Some Sodium Compounds Added to Food” is a partial list of some sodium additives used in food. Some of them you may recognize after reading this chapter. Others you may not recognize, but they are all ionic sodium compounds with some negatively charged ion also present.

Table 3.8 Some Sodium Compounds Added to Food

Sodium Compound	Use in Food
Sodium acetate	preservative, acidity regulator
Sodium adipate	food acid
Sodium alginate	thickener, vegetable gum, stabilizer, gelling agent, emulsifier
Sodium aluminum phosphate	acidity regulator, emulsifier
Sodium aluminosilicate	anticaking agent
Sodium ascorbate	antioxidant
Sodium benzoate	preservative
Sodium bicarbonate	mineral salt
Sodium bisulfite	preservative, antioxidant
Sodium carbonate	mineral salt
Sodium carboxymethylcellulose	emulsifier
Sodium citrates	food acid
Sodium dehydroacetate	preservative
Sodium erythorbate	antioxidant
Sodium erythorbin	antioxidant
Sodium ethyl para-hydroxybenzoate	preservative
Sodium ferrocyanide	anticaking agent
Sodium formate	preservative
Sodium fumarate	food acid
Sodium gluconate	stabilizer
Sodium hydrogen acetate	preservative, acidity regulator
Sodium hydroxide	mineral salt
Sodium lactate	food acid
Sodium malate	food acid
Sodium metabisulfite	preservative, antioxidant, bleaching agent
Sodium methyl para-hydroxybenzoate	preservative
Sodium nitrate	preservative, color fixative
Sodium nitrite	preservative, color fixative
Sodium orthophenyl phenol	preservative
Sodium propionate	preservative
Sodium propyl para-hydroxybenzoate	preservative
Sodium sorbate	preservative
Sodium stearoyl lactylate	emulsifier
Sodium succinates	acidity regulator, flavour enhancer
Sodium salts of fatty acids	emulsifier, stabilizer, anticaking agent
Sodium sulfite	mineral salt, preservative, antioxidant
Sodium sulfite	preservative, antioxidant
Sodium tartrate	food acid
Sodium tetraborate	preservative

The use of so many sodium compounds in prepared and processed foods has alarmed some physicians and nutritionists. They argue that the average person consumes too much sodium from his or her diet. The average person needs only about 500 mg of sodium every day; most people consume more than this—up to 10 times as much. Some studies have implicated increased sodium intake with high blood pressure; newer studies suggest that the link is questionable. However, there has been a push to reduce the amount of sodium most people ingest every day: avoid processed and manufactured foods, read labels on packaged foods (which include an indication of the sodium content), don’t oversalt foods, and use other herbs and spices besides salt in cooking.

Key Takeaways

Ions form when atoms lose or gain electrons.

Ionic compounds have positive ions and negative ions.

Ionic formulas balance the total positive and negative charges.

Ionic compounds have a simple system of naming.

Groups of atoms can have an overall charge and make ionic compounds.

Exercises

Explain how cations form.

Explain how anions form.

Give the charge each atom takes when it forms an ion. If more than one charge is possible, list both.

a) K

b) O

c) Co

4. Give the charge each atom takes when it forms an ion. If more than one charge is possible, list both.

a) Ca

b) I

c) Fe

5. Give the charge each atom takes when it forms an ion. If more than one charge is possible, list both.

a) Ag

b) Au

c) Br

6. Give the charge each atom takes when it forms an ion. If more than one charge is possible, list both.

a) S

b) Na

c) H

7. Name the ions from Exercise 3.

8. Name the ions from Exercise 4.

9 Name the ions from Exercise 5.

10. Name the ions from Exercise 6.

11. Give the formula and name for each ionic compound formed between the two listed ions.

a) Mg2+ and Cl−

b) Fe2+ and O2−

c) Fe3+ and O2−

12. Give the formula and name for each ionic compound formed between the two listed ions.

a) K+ and S2−

b) Ag+ and Br−

c) Sr2+ and N3−

13. Give the formula and name for each ionic compound formed between the two listed ions.

a) Cu2+ and F−

b) Ca2+ and O2−

c) K+ and P3−

14. Give the formula and name for each ionic compound formed between the two listed ions.

a) Na+ and N3−

b) Co2+ and I−

c) Au3+ and S2−

15. Give the formula and name for each ionic compound formed between the two listed ions.

a) K+ and SO42−

b) NH4+ and S2−

c) NH4+ and PO43−

16. Give the formula and name for each ionic compound formed between the two listed ions.

a) Ca2+ and NO3−

b) Ca2+ and NO2−

c) Sc3+ and C2H3O2−

17. Give the formula and name for each ionic compound formed between the two listed ions.

a) Pb4+ and SO42−

b) Na+ and I3−

c) Li+ and Cr2O72−

18. Give the formula and name for each ionic compound formed between the two listed ions.

a) NH4+ and N3−

b) Mg2+ and CO32−

c) Al3+ and OH−

19. Give the formula and name for each ionic compound formed between the two listed ions.

a) Ag+ and SO32−

b) Na+ and HCO3−

c) Fe3+ and ClO3−

20. Give the formula and name for each ionic compound formed between the two listed ions.

a) Rb+ and O22−

b) Au3+ and HSO4−

c) Sr2+ and NO2−

21. What is the difference between SO3 and SO32−?

22. What is the difference between NO2 and NO2−?

Answers

1.

Cations form by losing electrons.

3.

a) 1+

b) 2−

c) 2+, 3+

5.

a) 1+

b) 1+, 3+

c) 1−

7.

a) the potassium ion

b) the oxide ion

c) the cobalt(II) and cobalt(III) ions, respectively

9.

a) the silver ion

b) the gold(I) and gold(III) ions, respectively

c) the bromide ion

11.

a) magnesium chloride, MgCl2

b) iron(II) oxide, FeO

c) iron(III) oxide, Fe2O313.

a) copper(II) fluoride, CuF2

b) calcium oxide, CaO

c) potassium phosphide, K3P

15.

a) potassium sulfate, K2SO4

b) ammonium sulfide, (NH4)2S

c) ammonium phosphate, (NH4)3PO417.

a) lead(IV) sulfate, Pb(SO4)2

b) sodium triiodide, NaI3

c) lithium dichromate, Li2Cr2O719.

a) silver sulfite, Ag2SO3

b) sodium hydrogen carbonate, NaHCO3

c) iron(III) chlorate, Fe(ClO3)321.
SO3 is sulfur trioxide, while SO32− is the sulfite ion.

Chapter 16

3.5 Acids

Learning Objectives

Define acid.

Name a simple acid.

There is one other group of compounds that is important to us—acids—and these compounds have interesting chemical properties. Initially, we will define an acid as an ionic compound of the H+ cation dissolved in water. (We will expand on this definition in Chapter 13 “Acids and Bases”.) To indicate that something is dissolved in water, we will use the phase label (aq) next to a chemical formula (where aq stands for “aqueous,” a word that describes something dissolved in water). If the formula does not have this label, then the compound is treated as a molecular compound rather than an acid.

Acids have their own nomenclature system. If an acid is composed of only hydrogen and one other element, the name is hydro- + the stem of the other element + -ic acid. For example, the compound HCl(aq) is hydrochloric acid, while H2S(aq) is hydrosulfuric acid. (If these acids were not dissolved in water, the compounds would be called hydrogen chloride and hydrogen sulfide, respectively. Both of these substances are well known as molecular compounds; when dissolved in water, however, they are treated as acids.)

If a compound is composed of hydrogen ions and a polyatomic anion, then the name of the acid is derived from the stem of the polyatomic ion’s name. Typically, if the anion name ends in -ate, the name of the acid is the stem of the anion name plus -ic acid; if the related anion’s name ends in -ite, the name of the corresponding acid is the stem of the anion name plus -ous acid. Table 3.9 “Names and Formulas of Acids” lists the formulas and names of a variety of acids that you should be familiar with. You should recognize most of the anions in the formulas of the acids.

Table 3.9 Names and Formulas of Acids

Formula	Name
HC 2 H 3 O 2	acetic acid
HClO 3	chloric acid
HCl	hydrochloric acid
HBr	hydrobromic acid
HI	hydriodic acid
HF	hydrofluoric acid
HNO 3	nitric acid
H 2 C 2 O 4	oxalic acid
HClO 4	perchloric acid
H 3 PO 4	phosphoric acid
H 2 SO 4	sulfuric acid
H 2 SO 3	sulfurous acid
Note: The “aq” label is omitted for clarity.

Example 10 Name each acid without consulting Table 3.9 “Names and Formulas of Acids”. HBr H2SO4 Solution As a binary acid, the acid’s name is hydro- + stem name + -ic acid. Because this acid contains a bromine atom, the name is hydrobromic acid. Because this acid is derived from the sulfate ion, the name of the acid is the stem of the anion name + -ic acid. The name of this acid is sulfuric acid. Test Yourself Name each acid. HF HNO2 Answers hydrofluoric acid nitrous acid

All acids have some similar properties. For example, acids have a sour taste; in fact, the sour taste of some of our foods, such as citrus fruits and vinegar, is caused by the presence of acids in food. Many acids react with some metallic elements to form metal ions and elemental hydrogen. Acids make certain plant pigments change colors; indeed, the ripening of some fruits and vegetables is caused by the formation or destruction of excess acid in the plant. In Chapter 13 “Acids and Bases”, we will explore the chemical behaviour of acids.

Acids are very prevalent in the world around us. We have already mentioned that citrus fruits contain acid; among other compounds, they contain citric acid, H3C6H5O7(aq). Oxalic acid, H2C2O4(aq), is found in spinach and other green leafy vegetables. Hydrochloric acid not only is found in the stomach (stomach acid) but also can be bought in hardware stores as a cleaner for concrete and masonry. Phosphoric acid is an ingredient in some soft drinks.

Key Takeaways

An acid is a compound of the H+ ion dissolved in water.

Acids have their own naming system.

Acids have certain chemical properties that distinguish them from other compounds.

Exercises

Give the formula for each acid.

a) perchloric acid

b) hydriodic acid

2. Give the formula for each acid.

a) hydrosulfuric acid

b) phosphorous acid

3. Name each acid.

a) HF(aq)

b) HNO3(aq)

c) H2C2O4(aq)

4. Name each acid.

a) H2SO4(aq)

b) H3PO4(aq)

c) HCl(aq)

5. Name an acid found in food.

6 Name some properties that acids have in common.

Answers

1.

a) HClO4(aq)

b) HI(aq)

3.

a) hydrofluoric acid

b) nitric acid

c) oxalic acid

5.

oxalic acid (answers will vary)

Chapter 17

3.6 End-of-Chapter Material

Additional Exercises

How many electrons does it take to make the mass of one proton?

How many protons does it take to make the mass of a neutron?

Dalton’s initial version of the modern atomic theory says that all atoms of the same element are the same. Is this actually correct? Why or why not?

How are atoms of the same element the same? How are atoms of the same element different?

Give complete atomic symbols for the three known isotopes of hydrogen.

A rare isotope of helium has a single neutron in its nucleus. Write the complete atomic symbol of this isotope.

Use its place on the periodic table to determine if indium, In, atomic number 49, is a metal or a nonmetal.

Only a few atoms of astatine, At, atomic number 85, have been detected. On the basis of its position on the periodic table, would you expect it to be a metal or a nonmetal?

Americium-241 is a crucial part of many smoke detectors. How many neutrons are present in its nucleus?

Potassium-40 is a radioactive isotope of potassium that is present in the human body. How many neutrons are present in its nucleus?

Determine the atomic mass of ruthenium from the given abundance and mass data.

Ruthenium-96	5.54%	95.907 u
Ruthenium-98	1.87%	97.905 u
Ruthenium-99	12.76%	98.906 u
Ruthenium-100	12.60%	99.904 u
Ruthenium-101	17.06%	100.906 u
Ruthenium-102	31.55%	101.904 u
Ruthenium-104	18.62%	103.905 u

Determine the atomic mass of tellurium from the given abundance and mass data.

Tellurium-120	0.09%	119.904 u
Tellurium-122	2.55%	121.903 u
Tellurium-123	0.89%	122.904 u
Tellurium-124	4.74%	123.903 u
Tellurium-125	7.07%	124.904 u
Tellurium-126	18.84%	125.903 u
Tellurium-128	31.74%	127.904 u
Tellurium-130	34.08%	129.906 u

One atomic mass unit has a mass of 1.6605 × 10−24 g. What is the mass of one atom of sodium?

One atomic mass unit has a mass of 1.6605 × 10−24 g. What is the mass of one atom of uranium?

One atomic mass unit has a mass of 1.6605 × 10−24 g. What is the mass of one molecule of H2O?

One atomic mass unit has a mass of 1.6605 × 10−24 g. What is the mass of one molecule of PF5?

From their positions on the periodic table, will Cu and I form a molecular compound or an ionic compound?

From their positions on the periodic table, will N and S form a molecular compound or an ionic compound?

Mercury is an unusual element in that when it takes a 1+ charge as a cation, it always exists as the diatomic ion.

a) Propose a formula for the mercury(I) ion. b)What is the formula of mercury(I) chloride?

Propose a formula for hydrogen peroxide, a substance used as a bleaching agent. (Curiously, this compound does not behave as an acid, despite its formula. It behaves more like a classic nonmetal-nonmetal, molecular compound.)

The uranyl cation has the formula UO22+. Propose formulas and names for the ionic compounds between the uranyl cation and F−, SO42−, and PO43−.

The permanganate anion has the formula MnO4−. Propose formulas and names for the ionic compounds between the permanganate ion and K+, Ca2+, and Fe3+.

Answers

1.

about 1,800 electrons

3.

It is not strictly correct because of the existence of isotopes.

5.

H11, H12, and H13

7.

It is a metal.

9.

146 neutrons

11.

101.065 u

13.

3.817 × 10−23 g

15.

2.991 × 10−23 g

17.

ionic

19.

Hg22+

Hg2Cl2

21.

uranyl fluoride, UO2F2; uranyl sulfate, UO2SO4; uranyl phosphate, (UO2)3(PO4)2

Chapter 18

Chapter 4. Electronic Structure

Introduction to Electronic Structure

Normal light microscopes can magnify objects up to about 1,500 times. Electron microscopes can magnify objects up to 1,000,000 times. Why can electron microscopes magnify images so much?

A microscope’s resolution depends on the wavelength of light used. The smaller the wavelength, the more a microscope can magnify. Light is a wave, and, as such, it has a wavelength associated with it. The wavelength of visible light, which is detected by the eyes, varies from about 700 nm to about 400 nm.

One of the startling conclusions about modern science is that electrons also act as waves. However, the wavelength of electrons is much, much shorter—about 0.5 to 1 nm. This allows electron microscopes to magnify 600–700 times more than light microscopes. This allows us to see even smaller features in a world that is invisible to the naked eye.

Atoms act the way they do because of their structure. We already know that atoms are composed of protons, neutrons, and electrons. Protons and neutrons are located in the nucleus, and electrons orbit around the nucleus. But we need to know the structural details to understand why atoms react the way they do.

Virtually everything we know about atoms ultimately comes from light. Before we can understand the composition of atoms (especially electrons), we need to understand the properties of light.

Chapter 19

4.1 Quantum Numbers for Electrons

Learning Objectives

Explain what spectra are.

Learn the quantum numbers that are assigned to electrons.

There are two fundamental ways of generating light: either heat an object up so hot it glows or pass an electrical current through a sample of matter (usually a gas). Incandescent lights and fluorescent lights generate light via these two methods, respectively.

A hot object gives off a continuum of light. We notice this when the visible portion of the electromagnetic spectrum is passed through a prism: the prism separates light into its constituent colors, and all colors are present in a continuous rainbow (part (a) in Figure 4.3 “Prisms and Light”). This image is known as a continuous spectrum. However, when electricity is passed through a gas and light is emitted and this light is passed though a prism, we see only certain lines of light in the image (part (b) in Figure 4.3 “Prisms and Light”). This image is called a line spectrum. It turns out that every element has its own unique, characteristic line spectrum.

Why does the light emitted from an electrically excited gas have only certain colors, while light given off by hot objects has a continuous spectrum? For a long time, it was not well explained. Particularly simple was the spectrum of hydrogen gas, which could be described easily by an equation; no other element has a spectrum that is so predictable (Figure 4.4 “Hydrogen Spectrum”). Late-nineteenth-century scientists found that the positions of the lines obeyed a pattern given by the equation

where n = 3, 4, 5, 6,…, but they could not explain why this was so.

In 1913, the Danish scientist Niels Bohr suggested a reason why the hydrogen atom spectrum looked this way. He suggested that the electron in a hydrogen atom could not have any random energy, having only certain fixed values of energy that were indexed by the number n (the same n in the equation above and now called a quantum number). Quantities that have certain specific values are called quantized. Bohr suggested that the energy of the electron in hydrogen was quantized because it was in a specific orbit. Because the energies of the electron can have only certain values, the changes in energies can have only certain values (somewhat similar to a staircase: not only are the stair steps set at specific heights but the height between steps is fixed). Finally, Bohr suggested that the energy of light emitted from electrified hydrogen gas was equal to the energy difference of the electron’s energy states:

Elight = hν = ΔEelectron

This means that only certain frequencies (and thus, certain wavelengths) of light are emitted. Figure 4.5 “Bohr’s Model of the Hydrogen Atom” shows a model of the hydrogen atom based on Bohr’s ideas.

Bohr’s ideas were useful but were applied only to the hydrogen atom. However, later researchers generalized Bohr’s ideas into a new theory called quantum mechanics, which explains the behaviour of electrons as if they were acting as a wave, not as particles. Quantum mechanics predicts two major things: quantized energies for electrons of all atoms (not just hydrogen) and an organization of electrons within atoms. Electrons are no longer thought of as being randomly distributed around a nucleus or restricted to certain orbits (in that regard, Bohr was wrong). Instead, electrons are collected into groups and subgroups that explain much about the chemical behaviour of the atom.

In the quantum-mechanical model of an atom, the state of an electron is described by four quantum numbers, not just the one predicted by Bohr. The first quantum number is called the principal quantum number. Represented by n. (n). The principal quantum number largely determines the energy of an electron. Electrons in the same atom that have the same principal quantum number are said to occupy an electron shell of the atom. The principal quantum number can be any nonzero positive integer: 1, 2, 3, 4,….

Within a shell, there may be multiple possible values of the next quantum number, the angular momentum quantum number. Represented by ℓ. (ℓ). The ℓ quantum number has a minor effect on the energy of the electron but also affects the spatial distribution of the electron in three-dimensional space—that is, the shape of an electron’s distribution in space. The value of the ℓ quantum number can be any integer between 0 and n − 1:

ℓ = 0, 1, 2,…, n − 1

Thus, for a given value of n, there are different possible values of ℓ:

If n equals	ℓ can be
1	0
2	0 or 1
3	0, 1, or 2
4	0, 1, 2, or 3

and so forth. Electrons within a shell that have the same value of ℓ are said to occupy a subshell in the atom. Commonly, instead of referring to the numerical value of ℓ, a letter represents the value of ℓ (to help distinguish it from the principal quantum number):

If ℓ equals	The letter is
0	s
1	p
2	d
3	f

The next quantum number is called the magnetic quantum number, represented by mℓ. (mℓ). For any value of ℓ, there are 2ℓ + 1 possible values of mℓ, ranging from −ℓ to ℓ:

−ℓ ≤ mℓ ≤ ℓ

or

|mℓ|≤ ℓ

The following explicitly lists the possible values of mℓ for the possible values of ℓ:

If ℓ equals	The mℓ values can be
0	0
1	−1, 0, or 1
2	−2, −1, 0, 1, or 2
3	−3, −2, −1, 0, 1, 2, or 3

The particular value of mℓ dictates the orientation of an electron’s distribution in space. When ℓ is zero, mℓ can be only zero, so there is only one possible orientation. When ℓ is 1, there are three possible orientations for an electron’s distribution. When ℓ is 2, there are five possible orientations of electron distribution. This goes on and on for other values of ℓ, but we need not consider any higher values of ℓ here. Each value of mℓ designates a certain orbital. Thus, there is only one orbital when ℓ is zero, three orbitals when ℓ is 1, five orbitals when ℓ is 2, and so forth. The mℓ quantum number has no effect on the energy of an electron unless the electrons are subjected to a magnetic field—hence its name.

The ℓ quantum number dictates the general shape of electron distribution in space (Figure 4.6 “Electron Orbitals”). Any s orbital is spherically symmetric (part (a) in Figure 4.6 “Electron Orbitals”), and there is only one orbital in any s subshell. Any p orbital has a two-lobed, dumbbell-like shape (part (b) in Figure 4.6 “Electron Orbitals”); because there are three of them, we normally represent them as pointing along the x-, y-, and z-axes of Cartesian space. The d orbitals are four-lobed rosettes (part (c) in Figure 4.6 “Electron Orbitals”); they are oriented differently in space (the one labelled dz2 has two lobes and a torus instead of four lobes, but it is equivalent to the other orbitals). When there is more than one possible value of mℓ, each orbital is labelled with one of the possible values. It should be noted that the diagrams in Figure 4.6 “Electron Orbitals” are estimates of the electron distribution in space, not surfaces electrons are fixed on.

Figure 4.6 Electron Orbitals. (a) The lone

orbital is spherical in distribution. (b) The three

orbitals are shaped like dumbbells, and each one points in a different direction. (c) The five

orbitals are rosette in shape, except for the

orbital, which is a “dumbbell + torus” combination. They are all oriented in different directions.

The final quantum number is the spin quantum number. Represented by ms. (ms). Electrons and other subatomic particles behave as if they are spinning (we cannot tell if they really are, but they behave as if they are). Electrons themselves have two possible spin states, and because of mathematics, they are assigned the quantum numbers +1/2 and −1/2. These are the only two possible choices for the spin quantum number of an electron.

Example 3 Of the set of quantum numbers {n, ℓ, mℓ, ms}, which are possible and which are not allowed? {3, 2, 1, +1/2} {2, 2, 0, −1/2} {3, −1, 0, +1/2} Solution The principal quantum number n must be an integer, which it is here. The quantum number ℓ must be less than n, which it is. The mℓ quantum number must be between −ℓ and ℓ, which it is. The spin quantum number is +1/2, which is allowed. Because this set of quantum numbers follows all restrictions, it is possible. The quantum number n is an integer, but the quantum number ℓ must be less than n, which it is not. Thus, this is not an allowed set of quantum numbers. The principal quantum number n is an integer, but ℓ is not allowed to be negative. Therefore this is not an allowed set of quantum numbers. Test Yourself Of the set of quantum numbers {n, ℓ, mℓ, ms}, which are possible and which are not allowed? {4, 2, −2, 1} {3, 1, 0, −1/2} Answers Spin must be either +1/2 or −1/2, so this set of quantum number is not allowed. allowed

Chemistry Is Everywhere: Neon Lights

A neon light is basically an electrified tube with a small amount of gas in it. Electricity excites electrons in the gas atoms, which then give off light as the electrons go back into a lower energy state. However, many so-called “neon” lights don’t contain neon!

Although we know now that a gas discharge gives off only certain colors of light, without a prism or other component to separate the individual light colors, we see a composite of all the colors emitted. It is not unusual for a certain color to predominate. True neon lights, with neon gas in them, have a reddish-orange light due to the large amount of red-, orange-, and yellow-colored light emitted. However, if you use krypton instead of neon, you get a whitish light, while using argon yields a blue-purple light. A light filled with nitrogen gas glows purple, as does a helium lamp. Other gases—and mixtures of gases—emit other colors of light. Ironically, despite its importance in the development of modern electronic theory, hydrogen lamps emit little visible light and are rarely used for illumination purposes.

Key Takeaways

Electrons in atoms have quantized energies.

The state of electrons in atoms is described by four quantum numbers.

Exercises

Differentiate between a continuous spectrum and a line spectrum.

Under what circumstances is a continuous spectrum formed? Under what circumstances is a line spectrum formed?

What is the wavelength of light from the hydrogen atom spectrum when n = 3?

What is the wavelength of light from the hydrogen atom spectrum when n = 5?

What are the restrictions on the principal quantum number?

What are the restrictions on the angular momentum quantum number?

What are the restrictions on the magnetic quantum number?

What are the restrictions on the spin quantum number?

What are the possible values for ℓ when n = 5?

What are the possible values for ℓ when n = 1?

What are the possible values for mℓ when ℓ = 3?

What are the possible values for mℓ when ℓ = 6?

Describe the shape of an s orbital.

Describe the shape of a p orbital.

Which of these sets of quantum numbers is allowed? If it is not, explain why.

a) {4, 1, −2, +1/2}

b) {2, 0, 0, −1/2}

16. Which of these sets of quantum numbers is allowed? If it is not, explain why.

a) {5, 2, −1, −1/2}

b) {3, −1, −1, −1/2}

Answers

1.

A continuous spectrum is a range of light frequencies or wavelengths; a line spectrum shows only certain frequencies or wavelengths.

3.

6.56 × 10−7 m, or 656 nm

5.

The principal quantum number is restricted to being a positive whole number.

7.

The absolute value of mℓ must be less than or equal to ℓ: |mℓ| ≤ ℓ.

9.

ℓ can be 0, 1, 2, 3, or 4.

11.

mℓ can be −3, −2, −1, 0, 1, 2, or 3.

13.

An s orbital is spherical in shape.

15.

a) Because |mℓ| must be less than ℓ, this set of quantum numbers is not allowed.

b) allowed

Chapter 20

4.2 Organization of Electrons in Atoms

Learning Objectives

Learn how electrons are organized in atoms.

Represent the organization of electrons by an electron configuration.

Now that you know that electrons have quantum numbers, how are they arranged in atoms? The key to understanding electronic arrangement is summarized in the Pauli exclusion principle: no two electrons in an atom can have the same set of four quantum numbers. This dramatically limits the number of electrons that can exist in a shell or a subshell.

Electrons are typically organized around an atom by starting at the lowest possible quantum numbers first, which are the shells-subshells with lower energies. Consider H, an atom with a single electron only. Under normal conditions, the single electron would go into the n = 1 shell, which has only a single s subshell with one orbital (because mℓ can equal only 0). The convention is to label the shell-subshell combination with the number of the shell and the letter that represents the subshell. Thus, the electron goes in the 1s shell-subshell combination. It is usually not necessary to specify the mℓ or ms quantum numbers, but for the H atom, the electron has mℓ = 0 (the only possible value) and an ms of either +1/2 or −1/2.

The He atom has two electrons. The second electron can also go into the 1s shell-subshell combination but only if its spin quantum number is different from the first electron’s spin quantum number. Thus, the sets of quantum numbers for the two electrons are {1, 0, 0, +1/2} and {1, 0, 0, −1/2}. Notice that the overall set is different for the two electrons, as required by the Pauli exclusion principle.

The next atom is Li, with three electrons. However, now the Pauli exclusion principle implies that we cannot put that electron in the 1s shell-subshell because no matter how we try, this third electron would have the same set of four quantum numbers as one of the first two electrons. So this third electron must be assigned to a different shell-subshell combination. However, the n = 1 shell doesn’t have another subshell; it is restricted to having just ℓ = 0, or an s subshell. Therefore, this third electron has to be assigned to the n = 2 shell, which has an s (ℓ = 0) subshell and a p (ℓ = 1) subshell. Again, we usually start with the lowest quantum number, so this third electron is assigned to the 2s shell-subshell combination of quantum numbers.

The Pauli exclusion principle has the net effect of limiting the number of electrons that can be assigned a shell-subshell combination of quantum numbers. For example, in any s subshell, no matter what the shell number, there can be a maximum of only two electrons. Once the s subshell is filled up, any additional electrons must go to another subshell in the shell (if it exists) or to higher-numbered shell. A similar analysis shows that a p subshell can hold a maximum of six electrons. A d subshell can hold a maximum of 10 electrons, while an f subshell can have a maximum of 14 electrons. By limiting subshells to these maxima, we can distribute the available electrons to their shells and subshells.

Example 4 How would the six electrons for C be assigned to the n and ℓ quantum numbers? Solution The first two electrons go into the 1s shell-subshell combination. Two additional electrons can go into the 2s shell-subshell, but now this subshell is filled with the maximum number of electrons. The n = 2 shell also has a p subshell, so the remaining two electrons can go into the 2p subshell. The 2p subshell is not completely filled because it can hold a maximum of six electrons. Test Yourself How would the 11 electrons for Na be assigned to the n and ℓ quantum numbers? Answer two 1s electrons, two 2s electrons, six 2p electrons, and one 3s electron

Now that we see how electrons are partitioned among the shells and subshells, we need a more concise way of communicating this partitioning. Chemists use an electron configuration, to represent the organization of electrons in shells and subshells in an atom. An electron configuration simply lists the shell and subshell labels, with a right superscript giving the number of electrons in that subshell. The shells and subshells are listed in the order of filling.

For example, an H atom has a single electron in the 1s subshell. Its electron configuration is

H: 1s1

He has two electrons in the 1s subshell. Its electron configuration is

He: 1s2

The three electrons for Li are arranged in the 1s subshell (two electrons) and the 2s subshell (one electron). The electron configuration of Li is

Li: 1s22s1

Be has four electrons, two in the 1s subshell and two in the 2s subshell. Its electron configuration is

Be: 1s22s2

Now that the 2s subshell is filled, electrons in larger atoms must go into the 2p subshell, which can hold a maximum of six electrons. The next six elements progressively fill up the 2p subshell:

B: 1s22s22p1
C: 1s22s22p2
N: 1s22s22p3
O: 1s22s22p4
F: 1s22s22p5
Ne: 1s22s22p6

Now that the 2p subshell is filled (all possible subshells in the n = 2 shell), the next electron for the next-larger atom must go into the n = 3 shell, s subshell.

Example 5 What is the electron configuration for Na, which has 11 electrons? Solution The first two electrons occupy the 1s subshell. The next two occupy the 2s subshell, while the next six electrons occupy the 2p subshell. This gives us 10 electrons so far, with 1 electron left. This last electron goes into the n = 3 shell, s subshell. Thus, the electron configuration of Na is 1s22s22p63s1. Test Yourself What is the electron configuration for Mg, which has 12 electrons? Answer 1s22s22p63s2

For larger atoms, the electron arrangement becomes more complicated. This is because after the 3p subshell is filled, filling the 4s subshell first actually leads to a lesser overall energy than filling the 3d subshell. Recall that while the principal quantum number largely dictates the energy of an electron, the angular momentum quantum number also has an impact on energy; by the time we get to the 3d and 4s subshells, we see overlap in the filling of the shells. Thus, after the 3p subshell is completely filled (which occurs for Ar), the next electron for K occupies the 4s subshell, not the 3d subshell:

K: 1s22s22p63s23p64s1, not 1s22s22p63s23p63d1

For larger and larger atoms, the order of filling the shells and subshells seems to become even more complicated. There are some useful ways to remember the order, like that shown in Figure 4.7 “Electron Shell Filling Order”. If you follow the arrows in order, they pass through the subshells in the order that they are filled with electrons in larger atoms. Initially, the order is the same as the expected shell-subshell order, but for larger atoms, there is some shifting around of the principal quantum numbers. However, Figure 4.7 “Electron Shell Filling Order” gives a valid ordering of filling subshells with electrons for most atoms.

Figure 4.7 Electron Shell Filling Order. Starting with the top arrow, follow each arrow. The subshells you reach along each arrow give the ordering of filling of subshells in larger atoms. The

= 5 and higher shells have more subshells, but only those subshells that are needed to accommodate the electrons of the known elements are given.

Example 6 What is the predicted electron configuration for Sn, which has 50 electrons? Solution We will follow the chart in Figure 4.7 “Electron Shell Filling Order” until we can accommodate 50 electrons in the subshells in the proper order: Sn: 1s22s22p63s23p64s23d104p65s24d105p2 Verify by adding the superscripts, which indicate the number of electrons: 2 + 2 + 6 + 2 + 6 + 2 + 10 + 6 + 2 + 10 + 2 = 50, so we have placed all 50 electrons in subshells in the proper order. Test Yourself What is the electron configuration for Ba, which has 56 electrons? Answer 1s22s22p63s23p64s23d104p65s24d105p66s2

As the previous example demonstrated, electron configurations can get fairly long. An abbreviated electron configuration uses one of the elements from the last column of the periodic table, which contains what are called the noble gases, to represent the core of electrons up to that element. Then the remaining electrons are listed explicitly. For example, the abbreviated electron configuration for Li, which has three electrons, would be

Li: [He]2s1

where [He] represents the two-electron core that is equivalent to He’s electron configuration. The square brackets represent the electron configuration of a noble gas. This is not much of an abbreviation. However, consider the abbreviated electron configuration for W, which has 74 electrons:

W: [Xe]6s24f145d4

This is a significant simplification over an explicit listing of all 74 electrons. So for larger elements, the abbreviated electron configuration can be a very useful shorthand.

Example 7 What is the abbreviated electron configuration for P, which has 15 electrons? Solution With 15 electrons, the electron configuration of P is P: 1s22s22p63s23p3 The first immediate noble gas is Ne, which has an electron configuration of 1s22s22p6. Using the electron configuration of Ne to represent the first 10 electrons, the abbreviated electron configuration of P is P: [Ne]3s23p3 Test Yourself What is the abbreviated electron configuration for Rb, which has 37 electrons? Answer [Kr]5s1

There are some exceptions to the rigorous filling of subshells by electrons. In many cases, an electron goes from a higher-numbered shell to a lower-numbered but later-filled subshell to fill the later-filled subshell. One example is Ag. With 47 electrons, its electron configuration is predicted to be

Ag: [Kr]5s24d9

However, experiments have shown that the electron configuration is actually

Ag: [Kr]5s14d10

This, then, qualifies as an exception to our expectations. At this point, you do not need to memorize the exceptions; but if you come across one, understand that it is an exception to the normal rules of filling subshells with electrons, which can happen.

Electron Configuration Energy Diagrams

We have just seen that electrons fill orbitals in shells and subshells in a regular pattern, but why does it follow this pattern? There are three principles which should be followed to properly fill electron orbital energy diagrams:

The Aufbau principle

The Pauli exclusion principle

Hund’s rule

The overall pattern of the electron shell filling order emerges from the Aufbau principle (German for “building up”): electrons fill the lowest energy orbitals first. Increasing the principle quantum number, n, increases orbital energy levels, as the electron density becomes more spread out away from the nucleus. In many-electron atoms (all atoms except hydrogen), the energy levels of subshells varies due to electron-electron repulsions. The trend that emerges is that energy levels increase with value of the angular momentum quantum number, l, for orbitals sharing the same principle quantum number, n. This is demonstrated in Figure 4.8, where each line represents an orbital, and each set of lines at the same energy represents a subshell of orbitals.

As previously discussed, the Pauli exclusion principle states that we can only fill each orbital with a maximum of two electrons of opposite spin. But how should we fill multiple orbitals of the same energy level within a subshell (eg. The three orbitals in the 2p subshell)? Orbitals of the same energy level are known as degenerate orbitals, and we fill them using Hund’s rule: place one electron into each degenerate orbital first, before pairing them in the same orbital.

Let’s examine a few examples to demonstrate the use of the three principles.

Boron is atomic number 5, and therefore has 5 electrons. First fill the lowest energy 1s orbital with two electrons of opposite spin, then the 2s orbital with 2 electrons of opposite spin and finally place the last electron into any of the three degenerate 2p orbitals (Figure 4.9).

Moving across the periodic table, we follow Hund’s rule and add an additional electron to each degenerate 2p orbital for each subsequent element (Figure 4.10). At oxygen we can finally pair up and fill one of the degenerate 2p orbitals.

Key Takeaways

The Pauli exclusion principle limits the number of electrons in the subshells and shells.

Electrons in larger atoms fill shells and subshells in a regular pattern that we can follow.

Electron configurations are a shorthand method of indicating what subshells electrons occupy in atoms.

Abbreviated electron configurations are a simpler way of representing electron configurations for larger atoms.

Exceptions to the strict filling of subshells with electrons occur.

Electron configurations are assigned from lowest to highest energy following the Aufbau principle

One electron is placed in each degenerate orbital before pairing electrons following Hund’s rule.

Electron configuration energy diagrams follow three principles: the Aufbau principle, the Pauli exclusion principle and Hund’s rule.

Exercises

Give two possible sets of four quantum numbers for the electron in an H atom.

Give the possible sets of four quantum numbers for the electrons in a Li atom.

How many subshells are completely filled with electrons for Na? How many subshells are unfilled?

How many subshells are completely filled with electrons for Mg? How many subshells are unfilled?

What is the maximum number of electrons in the entire n = 2 shell?

What is the maximum number of electrons in the entire n = 4 shell?

Write the complete electron configuration for each atom.

a) Si, 14 electrons

b) Sc, 21 electrons

8. Write the complete electron configuration for each atom.

a) Br, 35 electrons

b) Be, 4 electrons

9. Write the complete electron configuration for each atom.

a) Cd, 48 electrons

b) Mg, 12 electrons

10. Write the complete electron configuration for each atom.

a) Cs, 55 electrons

b) Ar, 18 electrons

11. Write the abbreviated electron configuration for each atom in Exercise 7.

12. Write the abbreviated electron configuration for each atom in Exercise 8.

13. Write the abbreviated electron configuration for each atom in Exercise 9.

14. Write the abbreviated electron configuration for each atom in Exercise 10.

15. Draw electron configuration energy diagrams for potassium, and bromine.

Answers

1.

{1, 0, 0, 1/2} and [1, 0, 0, −1/2}

3.

Three subshells (1s, 2s, 2p) are completely filled, and one shell (3s) is partially filled.

5.

8 electrons

7.

a) 1s22s22p63s23p2

b) 1s22s22p63s23p64s23d1

9.

a) 1s22s22p63s23p64s23d104p65s24d10

b) 1s22s22p63s2

11.

a) [Ne]3s23p2

b) [Ar]4s23d1

13.

a) [Kr]5s24d10

b) [Ne]3s2

15.

Chapter 21

4.3 Light

Learning Objectives

Describe light with its frequency and wavelength.

Describe light as a particle of energy.

What we know as light is more properly called electromagnetic radiation. We know from experiments that light acts as a wave. As such, it can be described as having a frequency and a wavelength. The wavelength of light is the distance between corresponding points in two adjacent light cycles, and the frequency of light is the number of cycles of light that pass a given point in one second. Wavelength is typically represented by λ, the lowercase Greek letter lambda, while frequency is represented by ν, the lowercase Greek letter nu (although it looks like a Roman “vee,” it is actually the Greek equivalent of the letter “en”). Wavelength has units of length (meters, centimeters, etc.), while frequency has units of per second, written as s−1 and sometimes called a hertz (Hz). Figure 4. 1 “Characteristics of Light Waves” shows how these two characteristics are defined.

Light acts as a wave and can be described by a wavelength λ and a frequency ν.

One property of waves is that their speed is equal to their wavelength times their frequency. That means we have

speed = λν

For light, however, speed is actually a universal constant when light is traveling through a vacuum (or, to a very good approximation, air). The measured speed of light (c) in a vacuum is 2.9979 × 108 m/s, or about 3.00 × 108 m/s. Thus, we have

c = λν

Because the speed of light is a constant, the wavelength and the frequency of light are related to each other: as one increases, the other decreases and vice versa. We can use this equation to calculate what one property of light has to be when given the other property.

Example 1 What is the frequency of light if its wavelength is 5.55 × 10−7 m? Solution We use the equation that relates the wavelength and frequency of light with its speed. We have 3.00×108m/s = (5.55×10-7m)ν We divide both sides of the equation by 5.55 × 10−7 m and get ν = 5.41×1014 s-1 Note how the m units cancel, leaving s in the denominator. A unit in a denominator is indicated by a −1 power—s−1—and read as “per second.” Test Yourself What is the wavelength of light if its frequency is 1.55 × 1010 s−1? Answer 0.0194 m, or 19.4 mm

Light also behaves like a package of energy. It turns out that for light, the energy of the “package” of energy is proportional to its frequency. (For most waves, energy is proportional to wave amplitude, or the height of the wave.) The mathematical equation that relates the energy (E) of light to its frequency is

E = hν

where ν is the frequency of the light, and h is a constant called Planck’s constant. Its value is 6.626 × 10−34 J·s — a very small number that is another fundamental constant of our universe, like the speed of light. The units on Planck’s constant may look unusual, but these units are required so that the algebra works out.

Example 2 What is the energy of light if its frequency is 1.55 × 1010 s−1? Solution Using the formula for the energy of light, we have E = (6.626 × 10−34 J·s)(1.55 × 1010 s−1) Seconds are in the numerator and the denominator, so they cancel, leaving us with joules, the unit of energy. So E = 1.03 × 10−23 J This is an extremely small amount of energy—but this is for only one light wave. Test Yourself What is the frequency of a light wave if its energy is 4.156 × 10−20 J? Answer 6.27 × 1013 s−1

Because a light wave behaves like a little particle of energy, light waves have a particle-type name: the photon. It is not uncommon to hear light described as photons.

Wavelengths, frequencies, and energies of light span a wide range; the entire range of possible values for light is called the electromagnetic spectrum. We are mostly familiar with visible light, which is light having a wavelength range between about 400 nm and 700 nm. Light can have much longer and much shorter wavelengths than this, with corresponding variations in frequency and energy. Figure 4.2 “The Electromagnetic Spectrum” shows the entire electromagnetic spectrum and how certain regions of the spectrum are labelled. You may already be familiar with some of these regions; they are all light—with different frequencies, wavelengths, and energies.

Key Takeaways

Light acts like a wave, with a frequency and a wavelength.

The frequency and wavelength of light are related by the speed of light, a constant.

Light acts like a particle of energy, whose value is related to the frequency of light.

Exercises

Describe the characteristics of a light wave.

What is a characteristic of a particle of light?

What is the frequency of light if its wavelength is 7.33 × 10−5 m?

What is the frequency of light if its wavelength is 1.226 m?

What is the frequency of light if its wavelength is 733 nm?

What is the frequency of light if its wavelength is 8.528 cm?

What is the wavelength of light if its frequency is 8.19 × 1014 s−1?

What is the wavelength of light if its frequency is 3.66 × 106 s−1?

What is the wavelength of light if its frequency is 1.009 × 106 Hz?

What is the wavelength of light if its frequency is 3.79 × 10−3 Hz?

What is the energy of a photon if its frequency is 5.55 × 1013 s−1?

What is the energy of a photon if its frequency is 2.06 × 1018 s−1?

What is the energy of a photon if its wavelength is 5.88 × 10−4 m?

What is the energy of a photon if its wavelength is 1.888 × 102 m?

Answers

1.

Light has a wavelength and a frequency.

3.

4.09 × 1012 s−15.

4.09 × 1014 s−17.

3.66 × 10−7 m

9.

297 m

11.

3.68 × 10−20 J

13.

3.38 × 10−22 J

Chapter 22

4.4 Periodic Trends

Learning Objectives

1. Be able to state how certain properties of atoms vary based on their relative position on the periodic table.

One of the reasons the periodic table is so useful is because its structure allows us to qualitatively determine how some properties of the elements vary versus their position on the periodic table. The variation of properties versus position on the periodic table is called periodic trends. There is no other tool in science that allows us to judge relative properties of a class of objects like this, which makes the periodic table a very useful tool. Many periodic trends are general. There may be a few points where an opposite trend is seen, but there is an overall trend when considered across a whole row or down a whole column of the periodic table.

Effective Nuclear Charge

Many of the periodic properties of atoms depend on electron configuration; in particular, the valence electrons and their level of attraction to the nucleus.

Valence electrons are simultaneously attracted to the positive charge of the nucleus and screened (repelled) by the negative charges of other electrons. This net nuclear charge felt by valence electrons is known as its Effective Nuclear Charge, Zeff (pronounced “zed-effective”). The effective nuclear charge is always less than the actual nuclear charge, and can be roughly estimated using the following equation:

Zeff = Z – S

Where Z is the nuclear charge (equal to the number of protons), and S is the screening constant which can be approximated to the number of non-valence, “core” electrons.

Approximate the effective nuclear charge of magnesium.

First we must determine the electron configuration of magnesium to determine the number of core electrons.

Mg =1s2 2s2 2p6 3s2 = [Ne]3s2, therefore magnesium has 10 core electrons from its 1s2, 2s2, 2p6 orbitals.

Magnesium is element 12, so it has 12 protons and a nuclear charge of 12.

Zeff = 12 – 10

Zeff = 2+

Moving left to right across a period on the periodic table, each subsequent element has an additional proton and valence electron, but the core electrons which are responsible for the majority of screening remain the same. This results in a trend that in general the effective nuclear charge increases from left to right across any period of the periodic table.

Moving from top to bottom down a column of the periodic table, we might expect the elements to have a similar effective nuclear charge as they all have the same number of valence electrons. However, we actually see a slight increase in Zeff moving down a column of the periodic table. As the principal quantum number (n) increases, the orbital size increases making the core electron clouds more spread out. These core electron clouds that are more diffuse do not screen as well, giving a slight increase to Zeff (Figure 4.22)

Atomic Radii

The atomic radius is an indication of the size of an atom. Although the concept of a definite radius of an atom is a bit fuzzy, atoms behave as if they have a certain radius. Such radii can be estimated from various experimental techniques, such as the x-ray crystallography of crystals.

As you go down a column of the periodic table, the atomic radii increase. This is because the valence electron shell is getting a larger and there is a larger principal quantum number, so the valence shell lies physically farther away from the nucleus. This trend can be summarized as follows:

as ↓PT, atomic radius↑

where PT stands for periodic table. Going across a row on the periodic table, left to right, the trend is different. This is because although the valence shell maintains the same principal quantum number, the number of protons—and hence the nuclear charge—is increasing as you go across the row. The increasing positive charge leads to a larger effective nuclear charge which casts a tighter grip on the valence electrons, so as you go across the periodic table, the atomic radii decrease. Again, we can summarize this trend as follows:

as →PT, atomic radius↓

Figure 4.23 “Atomic Radii Trends on the Periodic Table” shows spheres representing the atoms of the s and p blocks from the periodic table to scale, showing the two trends for the atomic radius.

Although there are some reversals in the trend (e.g., see Po in the bottom row), atoms generally get smaller as you go across the periodic table and larger as you go down any one column. Numbers are the radii in pm.

Example 9 Referring only to a periodic table and not to Figure 4.23 “Atomic Radii Trends on the Periodic Table”, which atom is larger in each pair? Si or S S or Te Solution Si is to the left of S on the periodic table, so it is larger because as you go across the row, the atoms get smaller. S is above Te on the periodic table, so Te is larger because as you go down the column, the atoms get larger. Test Yourself Referring only to a periodic table and not to Figure 4.19 “Atomic Radii Trends on the Periodic Table”, which atom is smaller, Ca or Br? Answer Br

Ionization Energy

Ionization energy (IE) is the amount of energy required to remove an electron from an atom in the gas phase:

A(g) → A+(g) + e− ΔH ≡ IE

IE is usually expressed in kJ/mol of atoms. It is always positive because the removal of an electron always requires that energy be put in (i.e., it is endothermic). IE also shows periodic trends. As you go down the periodic table, it becomes easier to remove an electron from an atom (i.e., IE decreases) because the valence electron is farther away from the nucleus. Thus,

as ↓PT, IE↓

However, as you go across the periodic table and the electrons get drawn closer in, it takes more energy to remove an electron; as a result, IE increases:

as →PT, IE↑

Figure 4.24 “Ionization Energy on the Periodic Table” shows values of IE versus position on the periodic table. Again, the trend isn’t absolute, but the general trends going across and down the periodic table should be obvious.

Values are in kJ/mol.

IE also shows an interesting trend within a given atom. This is because more than one IE can be defined by removing successive electrons (if the atom has them to begin with):

A(g) → A+(g) + e− IE1
A+(g) → A2+(g) + e− IE2
A2+(g) → A3+(g) + e− IE3

and so forth.

Each successive IE is larger than the previous because an electron is being removed from an atom with a progressively larger positive charge. However, IE takes a large jump when a successive ionization goes down into a new shell. For example, the following are the first three IEs for Mg, whose electron configuration is 1s22s22p63s2:

Mg(g) → Mg+(g) + e− IE1 = 738 kJ/mol
Mg+(g) → Mg2+(g) + e− IE2 = 1,450 kJ/mol
Mg2+(g) → Mg3+(g) + e− IE3 = 7,734 kJ/mol

The second IE is twice the first, which is not a surprise: the first IE involves removing an electron from a neutral atom, while the second one involves removing an electron from a positive ion. The third IE, however, is over five times the previous one. Why is it so much larger? Because the first two electrons are removed from the 3s subshell, but the third electron has to be removed from the n = 2 shell (specifically, the 2p subshell, which is lower in energy than the n = 3 shell). Thus, it takes much more energy than just overcoming a larger ionic charge would suggest. It is trends like this that demonstrate that electrons are organized in atoms in groups.

Example 10 Which atom in each pair has the larger IE? Ca or Sr K or K+ Solution Because Sr is below Ca on the periodic table, it is easier to remove an electron from it; thus, Ca has the higher IE. Because K+ has a positive charge, it will be harder to remove another electron from it, so its IE is larger than that of K. Indeed, it will be significantly larger because the next electron in K+ to be removed comes from another shell. Test Yourself Which atom has the lower ionization energy, C or F? Answer C

Electron Affinity

The opposite of IE is described by electron affinity (EA), which is the energy change when a gas-phase atom accepts an electron:

A(g) + e−→A−(g) ΔH ≡ EA

EA is also usually expressed in kJ/mol. EA also demonstrates some periodic trends, although they are less obvious than the other periodic trends discussed previously. Generally, as you go across the periodic table, EA increases its magnitude:

as →PT, EA↑

There is not a definitive trend as you go down the periodic table; sometimes EA increases, sometimes it decreases. Figure 4.25 “Electron Affinity on the Periodic Table” shows EA values versus position on the periodic table for the s– and p-block elements. The trend isn’t absolute, especially considering the large positive EA values for the second column. However, the general trend going across the periodic table should be obvious.

Values are in kJ/mol.

Example 11 Predict which atom in each pair will have the highest magnitude of EA. C or F Na or S Solution C and F are in the same row on the periodic table, but F is farther to the right. Therefore, F should have the larger magnitude of EA. Na and S are in the same row on the periodic table, but S is farther to the right. Therefore, S should have the larger magnitude of EA. Test Yourself Predict which atom will have the highest magnitude of EA, As or Br. Answer Br

Key Takeaways

Certain properties—notably effective nuclear charge, atomic radius, IE, and EA—can be qualitatively understood by the positions of the elements on the periodic table.

Exercises

Write a chemical equation with an IE energy change.

Write a chemical equation with an EA energy change.

State the trends in atomic radii as you go across and down the periodic table.

State the trends in IE as you go across and down the periodic table.

Which atom of each pair is larger?

a) Na or Cs

b) N or Bi

6. Which atom of each pair is larger?

a) C or Ge

b) Be or Ba

7. Which atom of each pair is larger?

a) K or Cl

b) Ba or Bi

8. Which atom of each pair is larger?

a) Si or S

b) H or He

9. Which atom has the higher IE?

a) Na or S

b) Ge or Br

10. Which atom has the higher IE?

a) C or Ne

b) Rb or I

11. Which atom has the higher IE?

a) Li or Cs

b) Se or O

12. Which atom has the higher IE?

a) Al or Ga

a) F or I

13. A third-row element has the following successive IEs: 738; 1,450; 7,734; and 10,550 kJ/mol. Identify the element.

14. A third-row element has the following successive IEs: 1,012; 1,903; 2,912; 4,940; 6,270; and 21,300 kJ/mol. Identify the element.

15. For which successive IE is there a large jump in IE for Ca?

16. For which successive IE is there a large jump in IE for Al?

17. Which atom has the greater magnitude of EA?

a) C or F

b) Al or Cl

18. Which atom has the greater magnitude of EA?

a) K or Br

b) Mg or S

Answers

1.

Na(g) → Na+(g) + e− ΔH = IE (answers will vary)

3.

As you go across, atomic radii decrease; as you go down, atomic radii increase.

5.

a) Cs

b) Bi

7.

a) K

b) Ba

9.

a) S

b) Br

11.

a) Li

b) O

13.

Mg

15.

The third IE shows a large jump in Ca.

17.

a) F

b) Cl

Chapter 23

4.5 Electronic Structure and the Periodic Table

Learning Objectives

Relate the electron configurations of the elements to the shape of the periodic table.

Determine the expected electron configuration of an element by its place on the periodic table.

In Chapter 3 “Atoms, Molecules, and Ions”, we introduced the periodic table as a tool for organizing the known chemical elements. A periodic table is shown in Figure 4.11 “The Periodic Table”. The elements are listed by atomic number (the number of protons in the nucleus), and elements with similar chemical properties are grouped together in columns.

Why does the periodic table have the structure it does? The answer is rather simple, if you understand electron configurations: the shape of the periodic table mimics the filling of the subshells with electrons.

Let us start with H and He. Their electron configurations are 1s1 and 1s2, respectively; with He, the n = 1 shell is filled. These two elements make up the first row of the periodic table (see Figure 4.12 “The 1”).

H and He represent the filling of the 1s subshell.

The next two electrons, for Li and Be, would go into the 2s subshell. Figure 4.13 “The 2” shows that these two elements are adjacent on the periodic table.

In Li and Be, the 2s subshell is being filled.

For the next six elements, the 2p subshell is being occupied with electrons. On the right side of the periodic table, these six elements (B through Ne) are grouped together (Figure 4.14 “The 2”).

For B through Ne, the 2p subshell is being occupied.

The next subshell to be filled is the 3s subshell. The elements when this subshell is being filled, Na and Mg, are back on the left side of the periodic table (Figure 4.15 “The 3”).

Now the 3s subshell is being occupied.

Next, the 3p subshell is filled with the next six elements (Figure 4.16 “The 3”).

Next, the 3p subshell is filled with electrons.

Instead of filling the 3d subshell next, electrons go into the 4s subshell (Figure 4.17 “The 4”).

The 4s subshell is filled before the 3d subshell. This is reflected in the structure of the periodic table.

After the 4s subshell is filled, the 3d subshell is filled with up to 10 electrons. This explains the section of 10 elements in the middle of the periodic table (Figure 4.18 “The 3”).

The 3d subshell is filled in the middle section of the periodic table.

And so forth. As we go across the rows of the periodic table, the overall shape of the table outlines how the electrons are occupying the shells and subshells.

The first two columns on the left side of the periodic table are where the s subshells are being occupied. Because of this, the first two rows of the periodic table are labelled the s block. Similarly, the p block are the right-most six columns of the periodic table, the d block is the middle 10 columns of the periodic table, while the f block is the 14-column section that is normally depicted as detached from the main body of the periodic table. It could be part of the main body, but then the periodic table would be rather long and cumbersome. Figure 4.19 “Blocks on the Periodic Table” shows the blocks of the periodic table.

The periodic table is separated into blocks depending on which subshell is being filled for the atoms that belong in that section.

The electrons in the highest-numbered shell, plus any electrons in the last unfilled subshell, are called valence electrons; the highest-numbered shell is called the valence shell. (The inner electrons are called core electrons.) The valence electrons largely control the chemistry of an atom. If we look at just the valence shell’s electron configuration, we find that in each column, the valence shell’s electron configuration is the same. For example, take the elements in the first column of the periodic table: H, Li, Na, K, Rb, and Cs. Their electron configurations (abbreviated for the larger atoms) are as follows, with the valence shell electron configuration highlighted:

H:	1s1
Li:	1 s22s1
Na:	[Ne] 3s1
K:	[Ar] 4s1
Rb:	[Kr] 5s1
Cs:	[Xe] 6s1

They all have a similar electron configuration in their valence shells: a single s electron. Because much of the chemistry of an element is influenced by valence electrons, we would expect that these elements would have similar chemistry—and they do. The organization of electrons in atoms explains not only the shape of the periodic table but also the fact that elements in the same column of the periodic table have similar chemistry.

The same concept applies to the other columns of the periodic table. Elements in each column have the same valence shell electron configurations, and the elements have some similar chemical properties. This is strictly true for all elements in the s and p blocks. In the d and f blocks, because there are exceptions to the order of filling of subshells with electrons, similar valence shells are not absolute in these blocks. However, many similarities do exist in these blocks, so a similarity in chemical properties is expected.

Similarity of valence shell electron configuration implies that we can determine the electron configuration of an atom solely by its position on the periodic table. Consider Se, as shown in Figure 4.20 “Selenium on the Periodic Table”. It is in the fourth column of the p block. This means that its electron configuration should end in a p4 electron configuration. Indeed, the electron configuration of Se is [Ar]4s23d104p4, as expected.

Example 8 From the element’s position on the periodic table, predict the valence shell electron configuration for each atom. See Figure 4.21 “Various Elements on the Periodic Table”. Ca Sn Solution Ca is located in the second column of the s block. We would expect that its electron configuration should end with s2. Calcium’s electron configuration is [Ar]4s2. Sn is located in the second column of the p block, so we expect that its electron configuration would end in p2. Tin’s electron configuration is [Kr]5s24d105p2. Test Yourself From the element’s position on the periodic table, predict the valence shell electron configuration for each atom. See Figure 4.21 “Various Elements on the Periodic Table”. Ti Cl Answer [Ar]4s23d2 [Ne]3s23p5 Figure 4.21 Various Elements on the Periodic Table

Food and Drink App: Artificial Colors

The color of objects comes from a different mechanism than the colors of neon and other discharge lights. Although colored lights produce their colors, objects are colored because they preferentially reflect a certain color from the white light that shines on them. A red tomato, for example, is bright red because it reflects red light while absorbing all the other colors of the rainbow.

Many foods, such as tomatoes, are highly colored; in fact, the common statement “you eat with your eyes first” is an implicit recognition that the visual appeal of food is just as important as its taste. But what about processed foods?

Many processed foods have food colorings added to them. There are two types of food colorings: natural and artificial. Natural food colorings include caramelized sugar for brown; annatto, turmeric, and saffron for various shades of orange or yellow; betanin from beets for purple; and even carmine, a deep red dye that is extracted from the cochineal, a small insect that is a parasite on cacti in Central and South America. (That’s right: you may be eating bug juice!)

Some colorings are artificial. In the United States, the Food and Drug Administration currently approves only seven compounds as artificial colorings in food, beverages, and cosmetics:

FD&C Blue #1: Brilliant Blue FCF

FD&C Blue #2: Indigotine

FD&C Green #3: Fast Green FCF

RD&C Red #3: Erythrosine

FD&C Red #40: Allura Red AC

FD&C Yellow #5: Tartrazine

FD&C Yellow #6: Sunset Yellow FCF

Lower-numbered colors are no longer on the market or have been removed for various reasons. Typically, these artificial colorings are large molecules that absorb certain colors of light very strongly, making them useful even at very low concentrations in foods and cosmetics. Even at such low amounts, some critics claim that a small portion of the population (especially children) is sensitive to artificial colorings and urge that their use be curtailed or halted. However, formal studies of artificial colorings and their effects on behaviour have been inconclusive or contradictory. Despite this, most people continue to enjoy processed foods with artificial coloring (like those shown in the accompanying figure).

Key Takeaways

The arrangement of electrons in atoms is responsible for the shape of the periodic table.

Electron configurations can be predicted by the position of an atom on the periodic table.

Exercises

Where on the periodic table are s subshells being occupied by electrons?

Where on the periodic table are d subshells being occupied by electrons?

In what block is Ra found?

In what block is Br found?

What are the valence shell electron configurations of the elements in the second column of the periodic table?

What are the valence shell electron configurations of the elements in the next-to-last column of the periodic table?

What are the valence shell electron configurations of the elements in the first column of the p block?

What are the valence shell electron configurations of the elements in the last column of the p block?

From the element’s position on the periodic table, predict the electron configuration of each atom.

a) Sr

b) S

10. From the element’s position on the periodic table, predict the electron configuration of each atom.

a) Fe

b) Ba

11. From the element’s position on the periodic table, predict the electron configuration of each atom.

a) V

b) Ar

12. From the element’s position on the periodic table, predict the electron configuration of each atom.

a) Cl

b) K

13. From the element’s position on the periodic table, predict the electron configuration of each atom.

a) Ge

b) C

14. From the element’s position on the periodic table, predict the electron configuration of each atom.

a) Mg

b) I

Answers

1.

the first two columns

3.

the s block

5.

ns2

7.

ns2np1

9.

a) 1s22s22p63s23p64s23d104p65s2

b) 1s22s22p63s23p4

11.

a) 1s22s22p63s23p64s23d3

b) 1s22s22p63s23p6

13.

a) 1s22s22p63s23p64s23d104p2

b) 1s22s22p2

Chapter 24

4.6 End-of-Chapter Material

Additional Exercises

What is the frequency of light if its wavelength is 1.00 m?

What is the wavelength of light if its frequency is 1.00 s−1?

What is the energy of a photon if its wavelength is 1.00 meter?

What is the energy of a photon if its frequency is 1.00 s−1?

If visible light is defined by the wavelength limits of 400 nm and 700 nm, what is the energy range for visible light photons?

Domestic microwave ovens use microwaves that have a wavelength of 122 mm. What is the energy of one photon of this microwave?

Use the equation for the wavelengths of the lines of light in the H atom spectrum to calculate the wavelength of light emitted when n is 7 and 8.

Use the equation for the wavelengths of the lines of light in the H atom spectrum to calculate the wavelengths of light emitted when n is 5 and 6.

Make a table of all the possible values of the four quantum numbers when the principal quantum number n = 5.

Make a table of all the possible values of mℓ and ms when ℓ = 4. What is the lowest value of the principal quantum number for this to occur?

11. a) Predict the electron configurations of Sc through Zn.

b) From a source of actual electron configurations, determine how many exceptions there are from your predictions in part a.

12. a) Predict the electron configurations of Ga through Kr.

b) From a source of actual electron configurations, determine how many exceptions there are from your predictions in part a.

13. Recently, Russian chemists reported experimental evidence of element 117. Use the periodic table to predict its valence shell electron configuration.

14. Bi (atomic number 83) is used in some stomach discomfort relievers. Using its place on the periodic table, predict its valence shell electron configuration.

15. Which atom has a higher ionization energy (IE), O or P?

16. Which atom has a higher IE, F or As?

17. Which atom has a smaller radius, As or Cl?

18. Which atom has a smaller radius, K or F?

19. How many IEs does an H atom have? Write the chemical reactions for the successive ionizations.

20. How many IEs does a Be atom have? Write the chemical reactions for the successive ionizations.

21. Based on what you know of electrical charges, do you expect Na+ to be larger or smaller than Na?

22. Based on what you know of electrical charges, do you expect Cl− to be larger or smaller than Cl?

Answers

1.

3.00 × 108 s−13.

1.99 × 10−22 J

5.

4.97 × 10−19 J to 2.84 × 10−19 J

7.

3.97 × 10−7 m and 3.89 × 10−7 m, respectively

9.

n	ℓ	mℓ	ms
5	0	0	1/2 or −1/2
5	1	−1, 0, 1	1/2 or −1/2
5	2	−2, −1, 0, 1, 2	1/2 or −1/2
5	3	−3, −2, −1, 0, 1, 2, 3	1/2 or −1/2
5	4	−4, −3, −2, −1, 0, 1, 2, 3, 4	1/2 or −1/2

11.

a) The electron configurations are predicted to end in 3d1, 3d2, 3d3, 3d4, 3d5, 3d6, 3d7, 3d8, 3d9, and 3d10.

b) Cr and Cu are exceptions.

13.

Element 117’s valence shell electron configuration should be 7s27p5.

15.

O

17.

Cl

19.

H has only one IE: H → H+ + e−

21.

smaller

PART III

Unit 3 Reactions & Equations

Chapter 25

Chapter 5. Chemical Reactions and Equations

The space shuttle—and any other rocket-based system—uses chemical reactions to propel itself into space and maneuver itself when it gets into orbit. The rockets that lift the orbiter are of two different types. The three main engines are powered by reacting liquid hydrogen with liquid oxygen to generate water. Then there are the two solid rocket boosters, which use a solid fuel mixture that contains mainly ammonium perchlorate and powdered aluminum. The chemical reaction between these substances produces aluminum oxide, water, nitrogen gas, and hydrogen chloride. Although the solid rocket boosters each have a significantly lower mass than the liquid oxygen and liquid hydrogen tanks, they provide over 80% of the lift needed to put the shuttle into orbit—all because of chemical reactions.

Chemistry is largely about chemical changes. Indeed, if there were no chemical changes, chemistry as such would not exist! Chemical changes are a fundamental part of chemistry. Because chemical changes are so central, it may be no surprise that chemistry has developed some special ways of presenting them.

Chapter 26

5.1 The Chemical Equation

Learning Objectives

Define chemical equation.

Identify the parts of a chemical equation.

A chemical reaction expresses a chemical change. For example, one chemical property of hydrogen is that it will react with oxygen to make water. We can write that as follows:

hydrogen reacts with oxygen to make water

We can represent this chemical change more succinctly as

hydrogen + oxygen → water

where the + sign means that the two substances interact chemically with each other and the → symbol implies that a chemical reaction takes place. But substances can also be represented by chemical formulas. Remembering that hydrogen and oxygen both exist as diatomic molecules, we can rewrite our chemical change as

H2 + O2 → H2O

This is an example of a chemical equation, which is a concise way of representing a chemical reaction. The initial substances are called reactants, and the final substances are called products.

Unfortunately, it is also an incomplete chemical equation. The law of conservation of matter says that matter cannot be created or destroyed. In chemical equations, the number of atoms of each element in the reactants must be the same as the number of atoms of each element in the products. If we count the number of hydrogen atoms in the reactants and products, we find two hydrogen atoms. But if we count the number of oxygen atoms in the reactants and products, we find that there are two oxygen atoms in the reactants but only one oxygen atom in the products.

What can we do? Can we change the subscripts in the formula for water so that it has two oxygen atoms in it? No; you cannot change the formulas of individual substances because the chemical formula for a given substance is characteristic of that substance. What you can do, however, is to change the number of molecules that react or are produced. We do this one element at a time, going from one side of the reaction to the other, changing the number of molecules of a substance until all elements have the same number of atoms on each side.

To accommodate the two oxygen atoms as reactants, let us assume that we have two water molecules as products:

H2 + O2 → 2 H2O

The 2 in front of the formula for water is called a coefficient. Now there is the same number of oxygen atoms in the reactants as there are in the product. But in satisfying the need for the same number of oxygen atoms on both sides of the reaction, we have also changed the number of hydrogen atoms on the product side, so the number of hydrogen atoms is no longer equal. No problem—simply go back to the reactant side of the equation and add a coefficient in front of the H2. The coefficient that works is 2:

2 H2 + O2 → 2 H2O

There are now four hydrogen atoms in the reactants and also four atoms of hydrogen in the product. There are two oxygen atoms in the reactants and two atoms of oxygen in the product. The law of conservation of matter has been satisfied. When the reactants and products of a chemical equation have the same number of atoms of all elements present, we say that an equation is balanced. All proper chemical equations are balanced. If a substance does not have a coefficient written in front of it, it is assumed to be 1. Also, the convention is to use all whole numbers when balancing chemical equations. This sometimes makes us do a bit more “back and forth” work when balancing a chemical equation.

Example 1 Write and balance the chemical equation for each given chemical reaction. Hydrogen and chlorine react to make HCl. Ethane, C2H6, reacts with oxygen to make carbon dioxide and water. Solution Let us start by simply writing a chemical equation in terms of the formulas of the substances, remembering that both elemental hydrogen and chlorine are diatomic: H2 + Cl2 → HCl There are two hydrogen atoms and two chlorine atoms in the reactants and one of each atom in the product. We can fix this by including the coefficient 2 on the product side: H2 + Cl2 → 2 HCl Now there are two hydrogen atoms and two chlorine atoms on both sides of the chemical equation, so it is balanced. Start by writing the chemical equation in terms of the substances involved: C2H6 + O2 → CO2 + H2O We have two carbon atoms on the left, so we need two carbon dioxide molecules on the product side, so that each side has two carbon atoms; that element is balanced. We have six hydrogen atoms in the reactants, so we need six hydrogen atoms in the products. We can get this by having three water molecules: C2H6 + O2 → 2 CO2 + 3 H2O Now we have seven oxygen atoms in the products (four from the CO2 and three from the H2O). That means we need seven oxygen atoms in the reactants. However, because oxygen is a diatomic molecule, we can only get an even number of oxygen atoms at a time. We can achieve this by multiplying the other coefficients by 2: 2 C2H6 + O2 → 4 CO2 + 6 H2O By multiplying everything else by 2, we don’t unbalance the other elements, and we now get an even number of oxygen atoms in the product—14. We can get 14 oxygen atoms on the reactant side by having 7 oxygen molecules: 2 C2H6 + 7 O2 → 4 CO2 + 6 H2O As a check, recount everything to determine that each side has the same number of atoms of each element. This chemical equation is now balanced. Test Yourself Write and balance the chemical equation that represents nitrogen and hydrogen reacting to produce ammonia, NH3. Answer N2 + 3 H2 → 2 NH3

Many chemical equations also include phase labels for the substances: (s) for solid, (ℓ) for liquid, (g) for gas, and (aq) for aqueous (i.e., dissolved in water). Special conditions, such as temperature, may also be listed above the arrow. For example,

2 NaHCO3(s) →200°C Na2CO3(s) + CO2(g) + H2O(ℓ)

Key Takeaways

A chemical equation is a concise description of a chemical reaction.

Proper chemical equations are balanced.

Exercises

From the statement “nitrogen and hydrogen react to produce ammonia,” identify the reactants and the products.

From the statement “sodium metal reacts with water to produce sodium hydroxide and hydrogen,” identify the reactants and the products.

From the statement “magnesium hydroxide reacts with nitric acid to produce magnesium nitrate and water,” identify the reactants and the products.

From the statement “propane reacts with oxygen to produce carbon dioxide and water,” identify the reactants and the products.

Write and balance the chemical equation described by Exercise 1.

Write and balance the chemical equation described by Exercise 2.

Write and balance the chemical equation described by Exercise 3.

Write and balance the chemical equation described by Exercise 4. The formula for propane is C3H8.

Balance: ___NaClO3 → ___NaCl + ___O2

Balance: ___N2 + ___H2 → ___N2H4

Balance: ___Al + ___O2 → ___Al2O3

Balance: ___C2H4 + ___O2 → ___CO2 + ___H2O

How would you write the balanced chemical equation in Exercise 10 if all substances were gases?

How would you write the balanced chemical equation in Exercise 12 if all the substances except water were gases and water itself were a liquid?

Answers

1.

reactants: nitrogen and hydrogen; product: ammonia

3.

reactants: magnesium hydroxide and nitric acid; products: magnesium nitrate and water

5.

N2 + 3 H2 → 2 NH3

7.

Mg(OH)2 + 2 HNO3 → Mg(NO3)2 + 2 H2O

9.

2 NaClO3 → 2 NaCl + 3 O2

11.

4Al + 3O2 → 2Al2O3

13.

N2(g) + 3 H2(g) → 2 NH3(g)

Chapter 27

5.2 Types of Chemical Reactions: Single- and Double-Displacement Reactions

Learning Objectives

Recognize chemical reactions as single-replacement reactions and double-replacement reactions.

Use the periodic table, an activity series, or solubility rules to predict whether single-replacement reactions or double-replacement reactions will occur.

Up to now, we have presented chemical reactions as a topic, but we have not discussed how the products of a chemical reaction can be predicted. Here we will begin our study of certain types of chemical reactions that allow us to predict what the products of the reaction will be.

A single-replacement reaction is a chemical reaction in which one element is substituted for another element in a compound, generating a new element and a new compound as products. For example,

2 HCl(aq) + Zn(s) → ZnCl2(aq) + H2(g)

is an example of a single-replacement reaction. The hydrogen atoms in HCl are replaced by Zn atoms, and in the process a new element—hydrogen—is formed. Another example of a single-replacement reaction is

2 NaCl(aq) + F2(g) → 2 NaF(s) + Cl2(g)

Here the negatively charged ion changes from chloride to fluoride. A typical characteristic of a single-replacement reaction is that there is one element as a reactant and another element as a product.

Not all proposed single-replacement reactions will occur between two given reactants. This is most easily demonstrated with fluorine, chlorine, bromine, and iodine. Collectively, these elements are called the halogens and are in the next-to-last column on the periodic table (see Figure 5.1 “Halogens on the Periodic Table”). The elements on top of the column will replace the elements below them on the periodic table but not the other way around. Thus, the reaction represented by

CaI2(s) + Cl2(g) → CaCl2(s) + I2(s)

will occur, but the reaction

CaF2(s) + Br2(ℓ) → CaBr2(s) + F2(g)

will not because bromine is below fluorine on the periodic table. This is just one of many ways the periodic table helps us understand chemistry.

The halogens are the elements in the next-to-last column on the periodic table.

Example 2 Will a single-replacement reaction occur? If so, identify the products. MgCl2 + I2 → ? CaBr2 + F2 → ? Solution Because iodine is below chlorine on the periodic table, a single-replacement reaction will not occur. Because fluorine is above bromine on the periodic table, a single-replacement reaction will occur, and the products of the reaction will be CaF2 and Br2. Test Yourself Will a single-replacement reaction occur? If so, identify the products. FeI2 + Cl2 → ? Answer Yes; FeCl2 and I2

Chemical reactivity trends are easy to predict when replacing anions in simple ionic compounds—simply use their relative positions on the periodic table. However, when replacing the cations, the trends are not as straightforward. This is partly because there are so many elements that can form cations; an element in one column on the periodic table may replace another element nearby, or it may not. A list called the activity series does the same thing the periodic table does for halogens: it lists the elements that will replace elements below them in single-replacement reactions. A simple activity series is shown below.

Activity Series for Cation Replacement in Single-Replacement Reactions

Li

K

Ba

Sr

Ca

Na

Mg

Al

Mn

Zn

Cr

Fe

Ni

Sn

Pb

H2

Cu

Hg

Ag

Pd

Pt

Au

Using the activity series is similar to using the positions of the halogens on the periodic table. An element on top will replace an element below it in compounds undergoing a single-replacement reaction. Elements will not replace elements above them in compounds.

Example 3 Use the activity series to predict the products, if any, of each equation. FeCl2 + Zn → ? HNO3 + Au → ? Solution Because zinc is above iron in the activity series, it will replace iron in the compound. The products of this single-replacement reaction are ZnCl2 and Fe. Gold is below hydrogen in the activity series. As such, it will not replace hydrogen in a compound with the nitrate ion. No reaction is predicted. Test Yourself Use the activity series to predict the products, if any, of this equation. AlPO4 + Mg → ? Answer Mg3(PO4)2 and Al

A double-replacement reaction occurs when parts of two ionic compounds are exchanged, making two new compounds. A characteristic of a double-replacement equation is that there are two compounds as reactants and two different compounds as products. An example is

CuCl2(aq) + 2 AgNO3(aq) → Cu(NO3)2(aq) + 2 AgCl(s)

There are two equivalent ways of considering a double-replacement equation: either the cations are swapped, or the anions are swapped. (You cannot swap both; you would end up with the same substances you started with.) Either perspective should allow you to predict the proper products, as long as you pair a cation with an anion and not a cation with a cation or an anion with an anion.

Example 4 Predict the products of this double-replacement equation: BaCl2 + Na2SO4 → ? Solution Thinking about the reaction as either switching the cations or switching the anions, we would expect the products to be BaSO4 and NaCl. Test Yourself Predict the products of this double-replacement equation: KBr + AgNO3 → ? Answer KNO3 and AgBr

Predicting whether a double-replacement reaction occurs is somewhat more difficult than predicting a single-replacement reaction. However, there is one type of double-replacement reaction that we can predict: the precipitation reaction. A precipitation reaction occurs when two ionic compounds are dissolved in water and form a new ionic compound that does not dissolve; this new compound falls out of solution as a solid precipitate. The formation of a solid precipitate is the driving force that makes the reaction proceed.

To judge whether double-replacement reactions will occur, we need to know what kinds of ionic compounds form precipitates. For this, we use solubility rules, which are general statements that predict which ionic compounds dissolve (are soluble) and which do not (are not soluble or insoluble). Table 5.1 “Some Useful Solubility Rules” lists some general solubility rules. We need to consider each ionic compound (both the reactants and the possible products) in light of the solubility rules in Table 5.1 “Some Useful Solubility Rules”. If a compound is soluble, we use the (aq) label with it, indicating it dissolves. If a compound is not soluble, we use the (s) label with it and assume that it will precipitate out of solution. If everything is soluble, then no reaction will be expected.

Table 5.1 Some Useful Solubility Rules

These compounds generally dissolve in water (are soluble):	Exceptions:
All compounds of Li + , Na + , K + , Rb + , Cs + , and NH 4+	None
All compounds of NO 3− , ClO 3− , ClO 4− and C 2 H 3 O 2−	None
Compounds of Cl − , Br − , I −	Ag + , Hg 22+ , Pb 2+
Compounds of SO 42−	Hg 22+ , Pb 2+ , Sr 2+ , Ba 2+
These compounds generally do not dissolve in water (are insoluble):	Exceptions:
Compounds of CO 32− , CrO 42− , SO 32− and PO 43−	Compounds of Li + , Na + , K + , Rb + , Cs + , and NH 4+
Compounds of OH − and S 2−	Compounds of Li + , Na + , K + , Rb + , Cs + , NH 4+ , Sr 2+ , and Ba 2+

For example, consider the possible double-replacement reaction between Na2SO4 and SrCl2. The solubility rules say that all ionic sodium compounds are soluble and all ionic chloride compounds are soluble except for Ag+, Hg22+, and Pb2+, which are not being considered here. Therefore, Na2SO4 and SrCl2 are both soluble. The possible double-replacement reaction products are NaCl and SrSO4. Are these soluble? NaCl is (by the same rule we just quoted), but what about SrSO4? Compounds of the sulfate ion are generally soluble, but Sr2+ is an exception: we expect it to be insoluble—a precipitate. Therefore, we expect a reaction to occur, and the balanced chemical equation would be

Na2SO4(aq) + SrCl2(aq) → 2 NaCl(aq) + SrSO4(s)

You would expect to see a visual change corresponding to SrSO4 precipitating out of solution (Figure 5.2 “Double-Replacement Reactions”).

Figure 5.2 Double-Replacement Reactions. Some double-replacement reactions are obvious because you can see a solid precipitate coming out of solution.

Source: Photo courtesy of Choij, http://commons.wikimedia.org/wiki/File:Copper_solution.jpg.

Example 5 Will a double-replacement reaction occur? If so, identify the products. Ca(NO3)2 + KBr → ? NaOH + FeCl2 → ? Solution According to the solubility rules, both Ca(NO3)2 and KBr are soluble. Now we consider what the double-replacement products would be by switching the cations (or the anions)—namely, CaBr2 and KNO3. However, the solubility rules predict that these two substances would also be soluble, so no precipitate would form. Thus, we predict no reaction in this case. According to the solubility rules, both NaOH and FeCl2 are expected to be soluble. If we assume that a double-replacement reaction may occur, we need to consider the possible products, which would be NaCl and Fe(OH)2. NaCl is soluble, but, according to the solubility rules, Fe(OH)2 is not. Therefore, a reaction would occur, and Fe(OH)2(s) would precipitate out of solution. The balanced chemical equation is 2NaOH(aq) + FeCl2(aq) → 2NaCl(aq) + Fe(OH)2(s) Test Yourself Will a double-replacement equation occur? If so, identify the products. Sr(NO3)2 + KCl → ? Answer No reaction; all possible products are soluble.

Key Takeaways

A single-replacement reaction replaces one element for another in a compound.

The periodic table or an activity series can help predict whether single-replacement reactions occur.

A double-replacement reaction exchanges the cations (or the anions) of two ionic compounds.

A precipitation reaction is a double-replacement reaction in which one product is a solid precipitate.

Solubility rules are used to predict whether some double-replacement reactions will occur.

Exercises

What are the general characteristics that help you recognize single-replacement reactions?

What are the general characteristics that help you recognize double-replacement reactions?

Assuming that each single-replacement reaction occurs, predict the products and write each balanced chemical equation.

a) Zn + Fe(NO3)2 → ?

b) F2 + FeI3 → ?

4. Assuming that each single-replacement reaction occurs, predict the products and write each balanced chemical equation.

a) Li + MgSO4 → ?

b) NaBr + Cl2 → ?

5. Assuming that each single-replacement reaction occurs, predict the products and write each balanced chemical equation.

a) Sn + H2SO4 → ?

b) Al + NiBr2 → ?

6. Assuming that each single-replacement reaction occurs, predict the products and write each balanced chemical equation.

a) Mg + HCl → ?

b) HI + Br2 → ?

7. Use the periodic table or the activity series to predict if each single-replacement reaction will occur and, if so, write a balanced chemical equation.

a) FeCl2 + Br2 → ?

b) Fe(NO3)3 + Al → ?

8. Use the periodic table or the activity series to predict if each single-replacement reaction will occur and, if so, write a balanced chemical equation.

a) Zn + Fe3(PO4)2 → ?

b) Ag + HNO3 → ?

9. Use the periodic table or the activity series to predict if each single-replacement reaction will occur and, if so, write a balanced chemical equation.

a) NaI + Cl2 → ?

b) AgCl + Au → ?

10. Use the periodic table or the activity series to predict if each single-replacement reaction will occur and, if so, write a balanced chemical equation.

a) Pt + H3PO4 → ?

b) Li + H2O → ? (Hint: treat H2O as if it were composed of H+ and OH− ions.)

11. Assuming that each double-replacement reaction occurs, predict the products and write each balanced chemical equation.

a) Zn(NO3)2 + NaOH → ?

b) HCl + Na2S → ?

12. Assuming that each double-replacement reaction occurs, predict the products and write each balanced chemical equation.

a) Ca(C2H3O2)2 + HNO3 → ?

b) Na2CO3 + Sr(NO2)2 → ?

13. Assuming that each double-replacement reaction occurs, predict the products and write each balanced chemical equation.

a) Pb(NO3)2 + KBr → ?

b) K2O + MgCO3 → ?

14. Assuming that each double-replacement reaction occurs, predict the products and write each balanced chemical equation.

a) Sn(OH)2 + FeBr3 → ?

b) CsNO3 + KCl → ?

15. Use the solubility rules to predict if each double-replacement reaction will occur and, if so, write a balanced chemical equation.

a) Pb(NO3)2 + KBr → ?

b) K2O + Na2CO3 → ?

16. Use the solubility rules to predict if each double-replacement reaction will occur and, if so, write a balanced chemical equation.

a) Na2CO3 + Sr(NO2)2 → ?

b) (NH4)2SO4 + Ba(NO3)2 → ?

17. Use the solubility rules to predict if each double-replacement reaction will occur and, if so, write a balanced chemical equation.

a) K3PO4 + SrCl2 → ?

b) NaOH + MgCl2 → ?

18. Use the solubility rules to predict if each double-replacement reaction will occur and, if so, write a balanced chemical equation.

a) KC2H3O2 + Li2CO3 → ?

b) KOH + AgNO3 → ?

Answers

1. One element replaces another element in a compound.

3.

a) Zn + Fe(NO3)2 → Zn(NO3)2 + Fe

b) 3 F2 + 2 FeI3 → 3 I2 + 2 FeF3

5.

a) Sn + H2SO4 → SnSO4 + H2

b) 2 Al + 3 NiBr2 → 2 AlBr3 + 3 Ni

7.

a) No reaction occurs.

b) Fe(NO3)3 + Al → Al(NO3)3 + Fe

9.

a) 2 NaI + Cl2 → 2 NaCl + I2

b) No reaction occurs.

11.

a) Zn(NO3)2 + 2 NaOH → Zn(OH)2 + 2 NaNO3

b) 2 HCl + Na2S → 2 NaCl + H2S

13.

a) Pb(NO3)2 + 2 KBr → PbBr2 + 2 KNO3

b) K2O + MgCO3 → K2CO3 + MgO

15.

a) Pb(NO3)2 + 2 KBr → PbBr2(s) + 2 KNO3

b) No reaction occurs.

17.

a) 2 K3PO4 + 3 SrCl2 → Sr3(PO4)2(s) + 6 KCl

b) 2 NaOH + MgCl2 → 2 NaCl + Mg(OH)2(s)

Chapter 28

5.3 Ionic Equations: A Closer Look

Learning Objectives

Write ionic equations for chemical reactions between ionic compounds.

Write net ionic equations for chemical reactions between ionic compounds.

For single-replacement and double-replacement reactions, many of the reactions included ionic compounds: compounds between metals and nonmetals or compounds that contained recognizable polyatomic ions. Now we take a closer look at reactions that include ionic compounds.

One important aspect about ionic compounds that differs from molecular compounds has to do with dissolving in a liquid, such as water. When molecular compounds, such as sugar, dissolve in water, the individual molecules drift apart from each other. When ionic compounds dissolve, the ions physically separate from each other. We can use a chemical equation to represent this process—for example, with NaCl:

NaCl(s) → Na+(aq) + Cl–(aq)

When NaCl dissolves in water, the ions separate and go their own way in solution; the ions are now written with their respective charges, and the (aq) phase label emphasizes that they are dissolved (Figure 4.3 “Ionic Solutions”). This process is called dissociation; we say that the ions dissociate.

When an ionic compound dissociates in water, water molecules surround each ion and separate it from the rest of the solid. Each ion goes its own way in solution.

All ionic compounds that dissolve behave this way. (This behaviour was first suggested by the Swedish chemist Svante August Arrhenius [1859–1927] as part of his PhD dissertation in 1884. Interestingly, his PhD examination team had a hard time believing that ionic compounds would behave like this, so they gave Arrhenius a barely passing grade. Later, this work was cited when Arrhenius was awarded the Nobel Prize in Chemistry.) Keep in mind that when the ions separate, all the ions separate. Thus, when CaCl2 dissolves, the one Ca2+ ion and the two Cl− ions separate from each other:

CaCl2(s) → Ca2+(aq) + Cl–(aq) + Cl–(aq) or CaCl2(s) → Ca2+(aq) + 2Cl–(aq)

That is, the two chloride ions go off on their own. They do not remain as Cl2 (that would be elemental chlorine; these are chloride ions); they do not stick together to make Cl2− or Cl22−. They become dissociated ions in their own right. Polyatomic ions also retain their overall identity when they are dissolved.

Example 6 Write the chemical equation that represents the dissociation of each ionic compound. KBr Na2SO4 Solution KBr(s) → K+(aq) + Br−(aq) Not only do the two sodium ions go their own way, but the sulfate ion stays together as the sulfate ion. The dissolving equation is Na2SO4(s) → 2Na+(aq) + SO42−(aq) Test Yourself Write the chemical equation that represents the dissociation of (NH4)2S. Answer (NH4)2S(s) → 2NH4+(aq) + S2−(aq)

When chemicals in solution react, the proper way of writing the chemical formulas of the dissolved ionic compounds is in terms of the dissociated ions, not the complete ionic formula. A complete ionic equation is a chemical equation in which the dissolved ionic compounds are written as separated ions. Solubility rules are very useful in determining which ionic compounds are dissolved and which are not. For example, when NaCl(aq) reacts with AgNO3(aq) in a double-replacement reaction to precipitate AgCl(s) and form NaNO3(aq), the complete ionic equation includes NaCl, AgNO3, and NaNO3 written as separated ions:

Na+(aq) + Cl−(aq) + Ag+(aq) + NO3−(aq) → AgCl(s) + Na+(aq) + NO3−(aq)

This is more representative of what is occurring in the solution.

Example 7 Write the complete ionic equation for each chemical reaction. KBr(aq) + AgC2H3O2(aq) → KC2H3O2(aq) + AgBr(s) MgSO4(aq) + Ba(NO3)2(aq) → Mg(NO3)2(aq) + BaSO4(s) Solution For any ionic compound that is aqueous, we will write the compound as separated ions. The complete ionic equation is K+(aq) + Br−(aq) + Ag+(aq) + C2H3O2−(aq) → K+(aq) + C2H3O2−(aq) + AgBr(s) The complete ionic equation is Mg2+(aq) + SO42−(aq) + Ba2+(aq) + 2NO3−(aq) → Mg2+(aq) + 2NO3−(aq) + BaSO4(s) Test Yourself Write the complete ionic equation for CaCl2(aq) + Pb(NO3)2(aq) → Ca(NO3)2(aq) + PbCl2(s) Answer Ca2+(aq) + 2Cl−(aq) + Pb2+(aq) + 2NO3−(aq) → Ca2+(aq) + 2NO3−(aq) + PbCl2(s)

You may notice that in a complete ionic equation, some ions do not change their chemical form; they stay exactly the same on the reactant and product sides of the equation. For example, in

Na+(aq) + Cl−(aq) + Ag+(aq) + NO3−(aq) → AgCl(s) + Na+(aq) + NO3−(aq)

the Ag+(aq) and Cl−(aq) ions become AgCl(s), but the Na+(aq) ions and the NO3−(aq) ions stay as Na+(aq) ions and NO3−(aq) ions. These two ions are examples of spectator ions, ions that do nothing in the overall course of a chemical reaction. They are present, but they do not participate in the overall chemistry. It is common to cancel spectator ions (something also done with algebraic quantities) on the opposite sides of a chemical equation:

Na+(aq) + Cl−(aq) + Ag+(aq) + NO3−(aq) → AgCl(s) + Na+(aq) + NO3−(aq)

What remains when the spectator ions are removed is called the net ionic equation, which represents the actual chemical change occurring between the ionic compounds:

Cl−(aq) + Ag+(aq) → AgCl(s)

It is important to reiterate that the spectator ions are still present in solution, but they don’t experience any net chemical change, so they are not written in a net ionic equation.

Example 8 Write the net ionic equation for each chemical reaction. K+(aq) + Br−(aq) + Ag+(aq) + C2H3O2−(aq) → K+(aq) + C2H3O2−(aq) + AgBr(s) Mg2+(aq) + SO42−(aq) + Ba2+(aq) + 2 NO3−(aq) → Mg2+(aq) + 2 NO3−(aq) + BaSO4(s) Solution In the first equation, the K+(aq) and C2H3O2−(aq) ions are spectator ions, so they are canceled: K+(aq) + Br−(aq) + Ag+(aq) + C2H3O2−(aq)→ K+(aq) + C2H3O2−(aq) + AgBr(s) The net ionic equation is Br−(aq) + Ag+(aq) → AgBr(s) In the second equation, the Mg2+(aq) and NO3−(aq) ions are spectator ions, so they are canceled: Mg2+(aq) + SO42−(aq) + Ba2+(aq) + 2 NO3−(aq) → Mg2+(aq) + 2 NO3−(aq) + BaSO4(s) The net ionic equation is SO42−(aq) + Ba2+(aq) → BaSO4(s) Test Yourself Write the net ionic equation for CaCl2(aq) + Pb(NO3)2(aq) → Ca(NO3)2(aq) + PbCl2(s) Answer Pb2+(aq) + 2Cl−(aq) → PbCl2(s)

Chemistry Is Everywhere: Soluble and Insoluble Ionic Compounds

The concept of solubility versus insolubility in ionic compounds is a matter of degree. Some ionic compounds are very soluble, some are only moderately soluble, and some are soluble so little that they are considered insoluble. For most ionic compounds, there is also a limit to the amount of compound can be dissolved in a sample of water. For example, you can dissolve a maximum of 36.0 g of NaCl in 100 g of water at room temperature, but you can dissolve only 0.00019 g of AgCl in 100 g of water. We consider NaCl soluble but AgCl insoluble.

One place where solubility is important is in the tank-type water heater found in many homes in the United States. Domestic water frequently contains small amounts of dissolved ionic compounds, including calcium carbonate (CaCO3). However, CaCO3 has the relatively unusual property of being less soluble in hot water than in cold water. So as the water heater operates by heating water, CaCO3 can precipitate if there is enough of it in the water. This precipitate, called limescale, can also contain magnesium compounds, hydrogen carbonate compounds, and phosphate compounds. The problem is that too much limescale can impede the function of a water heater, requiring more energy to heat water to a specific temperature or even blocking water pipes into or out of the water heater, causing dysfunction.

Another place where solubility versus insolubility is an issue is the Grand Canyon. We usually think of rock as insoluble. But it is actually ever so slightly soluble. This means that over a period of about two billion years, the Colorado River carved rock from the surface by slowly dissolving it, eventually generating a spectacular series of gorges and canyons. And all because of solubility!

The Grand Canyon was formed by water running through rock for billions of years, very slowly dissolving it. Note the Colorado River is still present in the lower part of the photo.

“Grand canyon yavapal point 2010′′ by chensiyuan is licensed under Creative Commons

Key Takeaways

Ionic compounds that dissolve separate into individual ions.

Complete ionic equations show dissolved ionic solids as separated ions.

Net ionic equations show only the ions and other substances that change in a chemical reaction.

Exercises

Write a chemical equation that represents NaBr(s) dissociating in water.

Write a chemical equation that represents SrCl2(s) dissociating in water.

Write a chemical equation that represents (NH4)3PO4(s) dissociating in water.

Write a chemical equation that represents Fe(C2H3O2)3(s) dissociating in water.

Write the complete ionic equation for the reaction of FeCl2(aq) and AgNO3(aq). You may have to consult the solubility rules.

Write the complete ionic equation for the reaction of BaCl2(aq) and Na2SO4(aq). You may have to consult the solubility rules.

Write the complete ionic equation for the reaction of KCl(aq) and NaC2H3O2(aq). You may have to consult the solubility rules.

Write the complete ionic equation for the reaction of Fe2(SO4)3(aq) and Sr(NO3)2(aq). You may have to consult the solubility rules.

Write the net ionic equation for the reaction of FeCl2(aq) and AgNO3(aq). You may have to consult the solubility rules.

Write the net ionic equation for the reaction of BaCl2(aq) and Na2SO4(aq). You may have to consult the solubility rules.

Write the net ionic equation for the reaction of KCl(aq) and NaC2H3O2(aq). You may have to consult the solubility rules.

Write the net ionic equation for the reaction of Fe2(SO4)3(aq) and Sr(NO3)2(aq). You may have to consult the solubility rules.

Identify the spectator ions in Exercises 9 and 10.

Identify the spectator ions in Exercises 11 and 12.

Answers

1.

NaBr(s) → Na+(aq) + Br−(aq)

3.

(NH4)3PO4(s) → 3 NH4+(aq) + PO43−(aq)

5.

Fe2+(aq) + 2 Cl−(aq) + 2 Ag+(aq) + 2 NO3−(aq) → Fe2+(aq) + 2 NO3−(aq) + 2 AgCl(s)

7.

K+(aq) + Cl−(aq) + Na+(aq) + C2H3O2−(aq) → Na+(aq) + Cl−(aq) + K+(aq) + C2H3O2−(aq)

9.

2 Cl−(aq) + 2 Ag+(aq) → 2 AgCl(s)

11.

There is no overall reaction.

13.

In Exercise 9, Fe2+(aq) and NO3−(aq) are spectator ions; in Exercise 10, Na+(aq) and Cl−(aq) are spectator ions.

Chapter 29

5.4 Composition, Decomposition, and Combustion Reactions

Learning Objectives

Recognize composition, decomposition, and combustion reactions.

Predict the products of a combustion reaction.

Three classifications of chemical reactions will be reviewed in this section. Predicting the products in some of them may be difficult, but the reactions are still easy to recognize.

A composition reaction (sometimes also called a combination reaction or a synthesis reaction) produces a single substance from multiple reactants. A single substance as a product is the key characteristic of the composition reaction. There may be a coefficient other than one for the substance, but if the reaction has only a single substance as a product, it can be called a composition reaction. In the reaction

2 H2(g) + O2(g) → 2 H2O(ℓ)

water is produced from hydrogen and oxygen. Although there are two molecules of water being produced, there is only one substance—water—as a product. So this is a composition reaction.

A decomposition reaction starts from a single substance and produces more than one substance; that is, it decomposes. One substance as a reactant and more than one substance as the products is the key characteristic of a decomposition reaction. For example, in the decomposition of sodium hydrogen carbonate (also known as sodium bicarbonate),

2 NaHCO3(s) → Na2CO3(s) + CO2(g) + H2O(ℓ)

sodium carbonate, carbon dioxide, and water are produced from the single substance sodium hydrogen carbonate.

Composition and decomposition reactions are difficult to predict; however, they should be easy to recognize.

Example 9 Identify each equation as a composition reaction, a decomposition reaction, or neither. Fe2O3 + 3 SO3 → Fe2(SO4)3 NaCl + AgNO3 → AgCl + NaNO3 (NH4)2Cr2O7 → Cr2O3 + 4 H2O + N2 Solution In this equation, two substances combine to make a single substance. This is a composition reaction. Two different substances react to make two new substances. This does not fit the definition of either a composition reaction or a decomposition reaction, so it is neither. In fact, you may recognize this as a double-replacement reaction. A single substance reacts to make multiple substances. This is a decomposition reaction. Test Yourself Identify the equation as a composition reaction, a decomposition reaction, or neither. C3H8 → C3H4 + 2 H2 Answer decomposition

A combustion reaction occurs when a reactant combines with oxygen, many times from the atmosphere, to produce oxides of all other elements as products; any nitrogen in the reactant is converted to elemental nitrogen, N2. Many reactants, called fuels, contain mostly carbon and hydrogen atoms, reacting with oxygen to produce CO2 and H2O. For example, the balanced chemical equation for the combustion of methane, CH4, is as follows:

CH4 + 2 O2 → CO2 + 2 H2O

Kerosene can be approximated with the formula C12H26, and its combustion equation is

2 C12H26 + 37 O2 → 24 CO2 + 26 H2O

Sometimes fuels contain oxygen atoms, which must be counted when balancing the chemical equation. One common fuel is ethanol, C2H5OH, whose combustion equation is

C2H5OH + 3 O2 → 2 CO2 + 3 H2O

If nitrogen is present in the original fuel, it is converted to N2, not to a nitrogen-oxygen compound. Thus, for the combustion of the fuel dinitroethylene, whose formula is C2H2N2O4, we have

2 C2H2N2O4 + O2 → 4 CO2 + 2 H2O + 2 N2

Example 10 Complete and balance each combustion equation. the combustion of propane, C3H8 the combustion of ammonia, NH3 Solution The products of the reaction are CO2 and H2O, so our unbalanced equation is C3H8 + O2 → CO2 + H2O Balancing (and you may have to go back and forth a few times to balance this), we get C3H8 + 5 O2 → 3 CO2 + 4 H2O The nitrogen atoms in ammonia will react to make N2, while the hydrogen atoms will react with O2 to make H2O: NH3 + O2 → N2 + H2O To balance this equation without fractions (which is the convention), we get 4 NH3 + 3 O2 → 2 N2 + 6 H2O Test Yourself Complete and balance the combustion equation for cyclopropanol, C3H6O. Answer C3H6O + 4 O2 → 3 CO2 + 3 H2O Figure 5.6 Propane is a fuel used to provide heat for some homes. Propane is stored in large tanks like that shown here. Source: “flowers and propane” by vistavision is licensed under the Creative Commons Attribution-NonCommercial-NoDerivs 2.0 Generic

Key Takeaways

A composition reaction produces a single substance from multiple reactants.

A decomposition reaction produces multiple products from a single reactant.

Combustion reactions are the combination of some compound with oxygen to make oxides of the other elements as products (although nitrogen atoms react to make N2).

Exercises

Which is a composition reaction and which is not?

a) NaCl + AgNO3 → AgCl + NaNO3

b) CaO + CO2 → CaCO3

2. Which is a composition reaction and which is not?

a) H2 + Cl2 → 2 HCl

b) 2 HBr + Cl2 → 2 HCl + Br2

3. Which is a composition reaction and which is not?

a) 2 SO2 + O2 → 2 SO3

b) 6 C + 3 H2 → C6H6

4. Which is a composition reaction and which is not?

a) 4 Na + 2 C + 3 O2 → 2 Na2CO3

b) Na2CO3 → Na2O + CO2

5. Which is a decomposition reaction and which is not?

a) HCl + NaOH → NaCl + H2O

b) CaCO3 → CaO + CO2

6. Which is a decomposition reaction and which is not?

a) 3 O2 → 2 O3

b) 2 KClO3 → 2 KCl + 3 O2

7. Which is a decomposition reaction and which is not?

a) Na2O + CO2 → Na2CO3

b) H2SO3 → H2O + SO2

8. Which is a decomposition reaction and which is not?

a) 2 C7H5N3O6 → 3 N2 + 5 H2O + 7 CO + 7 C

b) C6H12O6 + 6 O2 → 6 CO2 + 6 H2O

9. Which is a combustion reaction and which is not?

a) C6H12O6 + 6 O2 → 6 CO2 + 6 H2O

b) 2 Fe2S3 + 9 O2 → 2 Fe2O3 + 6 SO2

10. Which is a combustion reaction and which is not?

a) CH4 + 2 F2 → CF4 + 2 H2

b) 2 H2 + O2 → 2 H2O

11. Which is a combustion reaction and which is not?

a) P4 + 5 O2 → 2 P2O5

b) 2 Al2S3 + 9 O2 → 2 Al2O3 + 6 SO2

12. Which is a combustion reaction and which is not?

a) C2H4 + O2 → C2H4O2

b) C2H4 + Cl2 → C2H4Cl2

13. Is it possible for a composition reaction to also be a combustion reaction? Give an example to support your case.

14. Is it possible for a decomposition reaction to also be a combustion reaction? Give an example to support your case.

15. Complete and balance each combustion equation.

a) C4H9OH + O2 → ?

b) CH3NO2 + O2 → ?

16. Complete and balance each combustion equation.

a) B2H6 + O2 → ? (The oxide of boron formed is B2O3.)

b) Al2S3 + O2 → ? (The oxide of sulfur formed is SO2.)

c) Al2S3 + O2 → ? (The oxide of sulfur formed is SO3.)

Answers

1.

a) not composition

a) composition

b) composition

5.

a) not decomposition

b) decomposition

7.

a) not decomposition

b) decomposition

9.

a) combustion

b) combustion

11.

a) combustion

b) combustion

13.

Yes; 2 H2 + O2 → 2 H2O (answers will vary)

15.

a) C4H9OH + 6 O2 → 4 CO2 + 5 H2O

b) 4 CH

NO

+ 3 O

→ 4 CO

+ 6 H

O + 2 N

Chapter 30

5.5 Neutralization Reactions

Learning Objectives

Identify an acid and a base.

Identify a neutralization reaction and predict its products.

In Chapter 3 “Atoms, Molecules, and Ions”, Section 3.5 “Acids”, we defined an acid as an ionic compound that contains H+ as the cation. This is slightly incorrect, but until additional concepts were developed, a better definition needed to wait. Now we can redefine an acid: an acid is any compound that increases the amount of hydrogen ion (H+) in an aqueous solution. The chemical opposite of an acid is a base. The equivalent definition of a base is that a base is a compound that increases the amount of hydroxide ion (OH−) in an aqueous solution. These original definitions were proposed by Arrhenius (the same person who proposed ion dissociation) in 1884, so they are referred to as the Arrhenius definition of an acid and a base, respectively.

You may recognize that, based on the description of a hydrogen atom, an H+ ion is a hydrogen atom that has lost its lone electron; that is, H+ is simply a proton. Do we really have bare protons moving about in aqueous solution? No. What is more likely is that the H+ ion has attached itself to one (or more) water molecule(s). To represent this chemically, we define the hydronium ion H3O+(aq), a water molecule with an extra hydrogen ion attached to it. as H3O+, which represents an additional proton attached to a water molecule. We use the hydronium ion as the more logical way a hydrogen ion appears in an aqueous solution, although in many chemical reactions H+ and H3O+ are treated equivalently.

The reaction of an acid and a base is called a neutralization reaction. Although acids and bases have their own unique chemistries, the acid and base cancel each other’s chemistry to produce a rather innocuous substance—water. In fact, the general reaction between an acid and a base is

acid + base → water + salt

where the term salt is generally used to define any ionic compound (soluble or insoluble) that is formed from a reaction between an acid and a base. (In chemistry, the word salt refers to more than just table salt.) For example, the balanced chemical equation for the reaction between HCl(aq) and KOH(aq) is

HCl(aq) + KOH(aq) → H2O(ℓ) + KCl(aq)

where the salt is KCl. By counting the number of atoms of each element, we find that only one water molecule is formed as a product. However, in the reaction between HCl(aq) and Mg(OH)2(aq), additional molecules of HCl and H2O are required to balance the chemical equation:

2 HCl(aq) + Mg(OH)2(aq) → 2 H2O(ℓ) + MgCl2(aq)

Here, the salt is MgCl2. (This is one of several reactions that take place when a type of antacid—a base—is used to treat stomach acid.)

Example 11 Write the neutralization reactions between each acid and base. HNO3(aq) and Ba(OH)2(aq) H3PO4(aq) and Ca(OH)2(aq) Solution First, we will write the chemical equation with the formulas of the reactants and the expected products; then we will balance the equation. The expected products are water and barium nitrate, so the initial chemical reaction is HNO3(aq) + Ba(OH)2(aq) → H2O(ℓ) + Ba(NO3)2(aq) To balance the equation, we need to realize that there will be two H2O molecules, so two HNO3 molecules are required: 2HNO3(aq) + Ba(OH)2(aq) → 2H2O(ℓ) + Ba(NO3)2(aq) This chemical equation is now balanced. The expected products are water and calcium phosphate, so the initial chemical equation is H3PO4(aq) + Ca(OH)2(aq) → H2O(ℓ) + Ca3(PO4)2(s) According to the solubility rules, Ca3(PO4)2 is insoluble, so it has an (s) phase label. To balance this equation, we need two phosphate ions and three calcium ions; we end up with six water molecules to balance the equation: 2 H3PO4(aq) + 3 Ca(OH)2(aq) → 6 H2O(ℓ) + Ca3(PO4)2(s) This chemical equation is now balanced. Test Yourself Write the neutralization reaction between H2SO4(aq) and Sr(OH)2(aq). Answer H2SO4(aq) + Sr(OH)2(aq) → 2 H2O(ℓ) + SrSO4(aq)

Neutralization reactions are one type of chemical reaction that proceeds even if one reactant is not in the aqueous phase. For example, the chemical reaction between HCl(aq) and Fe(OH)3(s) still proceeds according to the equation

3 HCl(aq) + Fe(OH)3(s) → 3 H2O(ℓ) + FeCl3(aq)

even though Fe(OH)3 is not soluble. When one realizes that Fe(OH)3(s) is a component of rust, this explains why some cleaning solutions for rust stains contain acids—the neutralization reaction produces products that are soluble and wash away. (Washing with acids like HCl is one way to remove rust and rust stains, but HCl must be used with caution!)

Complete and net ionic reactions for neutralization reactions will depend on whether the reactants and products are soluble, even if the acid and base react. For example, in the reaction of HCl(aq) and NaOH(aq),

HCl(aq) + NaOH(aq) → H2O(ℓ) + NaCl(aq)

the complete ionic reaction is

H+(aq) + Cl−(aq) + Na+(aq) + OH−(aq) → H2O(ℓ) + Na+(aq) + Cl−(aq)

The Na+(aq) and Cl−(aq) ions are spectator ions, so we can remove them to have

H+(aq) + OH−(aq) → H2O(ℓ)

as the net ionic equation. If we wanted to write this in terms of the hydronium ion, H3O+(aq), we would write it as

H3O+(aq) + OH−(aq) → 2H2O(ℓ)

With the exception of the introduction of an extra water molecule, these two net ionic equations are equivalent.

However, for the reaction between HCl(aq) and Cr(OH)2(s), because chromium(II) hydroxide is insoluble, we cannot separate it into ions for the complete ionic equation:

2 H+(aq) + 2 Cl−(aq) + Cr(OH)2(s) → 2 H2O(ℓ) + Cr2+(aq) + 2 Cl−(aq)

The chloride ions are the only spectator ions here, so the net ionic equation is

2 H+(aq) + Cr(OH)2(s) → 2 H2O(ℓ) + Cr2+(aq)

Example 12 Oxalic acid, H2C2O4(s), and Ca(OH)2(s) react very slowly. What is the net ionic equation between these two substances if the salt formed is insoluble? (The anion in oxalic acid is the oxalate ion, C2O42−.) Solution The products of the neutralization reaction will be water and calcium oxalate: H2C2O4(s) + Ca(OH)2(s) → 2 H2O(ℓ) + CaC2O4(s) Because nothing is dissolved, there are no substances to separate into ions, so the net ionic equation is the equation of the three solids and one liquid. Test Yourself What is the net ionic equation between HNO3(aq) and Ti(OH)4(s)? Answer 4 H+(aq) + Ti(OH)4(s) → 4 H2O(ℓ) + Ti4+(aq)

Food and Drink App: Acids in Foods

Many foods and beverages contain acids. Acids impart a sour note to the taste of foods, which may add some pleasantness to the food. For example, orange juice contains citric acid, H3C6H5O7. Note how this formula shows hydrogen atoms in two places; the first hydrogen atoms written are the hydrogen atoms that can form H+ ions, while the second hydrogen atoms written are part of the citrate ion, C6H5O73−. Lemons and limes contain much more citric acid—about 60 times as much—which accounts for these citrus fruits being more sour than most oranges. Vinegar is essentially a ~5% solution of acetic acid (HC2H3O2) in water. Apples contain malic acid (H2C4H4O5; the name malic acid comes from the apple’s botanical genus name, malus), while lactic acid (HC3H5O3) is found in wine and sour milk products, such as yogurt and some cottage cheeses.

Table 5.2 “Various Acids Found in Food and Beverages” lists some acids found in foods, either naturally or as an additive. Frequently, the salts of acid anions are used as additives, such as monosodium glutamate (MSG), which is the sodium salt derived from glutamic acid. As you read the list, you should come to the inescapable conclusion that it is impossible to avoid acids in food and beverages.

Table 5.2 Various Acids Found in Food and Beverages

Acid Name	Acid Formula	Use and Appearance
acetic acid	HC 2 H 3 O 2	flavouring; found in vinegar
adipic acid	H 2 C 6 H 8 O 4	flavouring; found in processed foods and some antacids
alginic acid	various	thickener; found in drinks, ice cream, and weight loss products
ascorbic acid	HC 6 H 7 O 6	antioxidant, also known as vitamin C; found in fruits and vegetables
benzoic acid	HC 6 H 5 CO 2	preservative; found in processed foods
citric acid	H 3 C 6 H 5 O 7	flavouring; found in citrus fruits
dehydroacetic acid	HC 8 H 7 O 4	preservative, especially for strawberries and squash
erythrobic acid	HC 6 H 7 O 6	antioxidant; found in processed foods
fatty acids	various	thickener and emulsifier; found in processed foods
fumaric acid	H 2 C 4 H 2 O 4	flavouring; acid reactant in some baking powders
glutamic acid	H 2 C 5 H 7 NO 4	flavouring; found in processed foods and in tomatoes, some cheeses, and soy products
lactic acid	HC 3 H 5 O 3	flavouring; found in wine, yogurt, cottage cheese, and other sour milk products
malic acid	H 2 C 4 H 4 O 5	flavouring; found in apples and unripe fruit
phosphoric acid	H 3 PO 4	flavouring; found in some colas
propionic acid	HC 3 H 5 O 2	preservative; found in baked goods
sorbic acid	HC 6 H 7 O 2	preservative; found in processed foods
stearic acid	HC 18 H 35 O 2	anticaking agent; found in hard candies
succinic acid	H 2 C 4 H 4 O 4	flavouring; found in wine and beer
tartaric acid	H 2 C 4 H 4 O 6	flavouring; found in grapes, bananas, and tamarinds

Key Takeaways

The Arrhenius definition of an acid is a substance that increases the amount of H+ in an aqueous solution.

The Arrhenius definition of a base is a substance that increases the amount of OH− in an aqueous solution.

Neutralization is the reaction of an acid and a base, which forms water and a salt.

Net ionic equations for neutralization reactions may include solid acids, solid bases, solid salts, and water.

Exercises

What is the Arrhenius definition of an acid?

What is the Arrhenius definition of a base?

Predict the products of each acid-base combination listed. Assume that a neutralization reaction occurs.

a) HCl and KOH

b) H2SO4 and KOH

c) H3PO4 and Ni(OH)2

4. Predict the products of each acid-base combination listed. Assume that a neutralization reaction occurs.

a) HBr and Fe(OH)3

b) HNO2 and Al(OH)3

c) HClO3 and Mg(OH)2

5. Write a balanced chemical equation for each neutralization reaction in Exercise 3.

6. Write a balanced chemical equation for each neutralization reaction in Exercise 4.

7. Write a balanced chemical equation for the neutralization reaction between each given acid and base. Include the proper phase labels.

a) HI(aq) + KOH(aq) → ?

b) H2SO4(aq) + Ba(OH)2(aq) → ?

8. Write a balanced chemical equation for the neutralization reaction between each given acid and base. Include the proper phase labels.

a) HNO3(aq) + Fe(OH)3(s) → ?

b) H3PO4(aq) + CsOH(aq) → ?

9. Write the net ionic equation for each neutralization reaction in Exercise 7.

10. Write the net ionic equation for each neutralization reaction in Exercise 8.

11. Write the complete and net ionic equations for the neutralization reaction between HClO3(aq) and Zn(OH)2(s). Assume the salt is soluble.

12. Write the complete and net ionic equations for the neutralization reaction between H2C2O4(s) and Sr(OH)2(aq). Assume the salt is insoluble.

13. Explain why the net ionic equation for the neutralization reaction between HCl(aq) and KOH(aq) is the same as the net ionic equation for the neutralization reaction between HNO3(aq) and RbOH.

14. Explain why the net ionic equation for the neutralization reaction between HCl(aq) and KOH(aq) is different from the net ionic equation for the neutralization reaction between HCl(aq) and AgOH.

15. Write the complete and net ionic equations for the neutralization reaction between HCl(aq) and KOH(aq) using the hydronium ion in place of H+. What difference does it make when using the hydronium ion?

16. Write the complete and net ionic equations for the neutralization reaction between HClO3(aq) and Zn(OH)2(s) using the hydronium ion in place of H+. Assume the salt is soluble. What difference does it make when using the hydronium ion?

Answers

An Arrhenius acid increases the amount of H+ ions in an aqueous solution.

3.

a) KCl and H2O

b) K2SO4 and H2O

c) Ni3(PO4)2 and H2O

5.

a) HCl + KOH → KCl + H2O

b) H2SO4 + 2 KOH → K2SO4 + 2 H2O

c) 2 H3PO4 + 3 Ni(OH)2 → Ni3(PO4)2 + 6 H2O

a) HI(aq) + KOH(aq) → KCl(aq) + H2O(ℓ)

b) H2SO4(aq) + Ba(OH)2(aq) → BaSO4(s) + 2 H2O(ℓ)

9.

a) H+(aq) + OH−(aq) → H2O(ℓ)

b) 2 H+(aq) + SO42−(aq) + Ba2+(aq) + 2 OH−(aq) → BaSO4(s) + 2 H2O(ℓ)

11. Complete ionic equation:

2 H+(aq) + 2 ClO3−(aq) + Zn2+(aq) + 2 OH−(aq) → Zn2+(aq) + 2 ClO3−(aq) + 2 H2O(ℓ)

Net ionic equation:

2 H+(aq) + 2 OH−(aq) → 2 H2O(ℓ)

13. Because the salts are soluble in both cases, the net ionic reaction is just H+(aq) + OH−(aq) → H2O(ℓ).

15. Complete ionic equation:

H3O+(aq) + Cl−(aq) + K+(aq) + OH−(aq) → 2 H2O(ℓ) + K+(aq) + Cl−(aq)

Net ionic equation:

H3O+(aq) + OH−(aq) → 2 H2O(ℓ)

The difference is simply the presence of an extra water molecule as a product.

Chapter 31

5.6 Oxidation-Reduction Reactions

Learning Objectives

Define oxidation and reduction.

Assign oxidation numbers to atoms in simple compounds.

Recognize a reaction as an oxidation-reduction reaction.

Consider this chemical reaction:

2 Na(s) + Cl2(g) → 2 NaCl

The reactants are elements, and it is assumed that they are electrically neutral; they have the same number of electrons as protons. The product, however, is ionic; it is composed of Na+ and Cl− ions. Somehow, the individual sodium atoms as reactants had to lose an electron to make the Na+ ion, while the chlorine atoms as reactants had to each gain an electron to become the Cl− ion. This reaction involves the transfer of electrons between atoms.

In reality, electrons are lost by some atoms and gained by other atoms simultaneously. However, mentally we can separate the two processes. Oxidation is defined as the loss of one or more electrons by an atom. Reduction is defined as the gain of one or more electrons by an atom. In reality, oxidation and reduction always occur together; it is only mentally that we can separate them. Chemical reactions that involve the transfer of electrons are called oxidation-reduction (or redox) reactions.

Redox reactions require that we keep track of the electrons assigned to each atom in a chemical reaction. How do we do that? We use an artificial count called the oxidation number to keep track of electrons in atoms. Oxidation numbers are assigned to atoms based on a series of rules. Oxidation numbers are not necessarily equal to the charge on the atom; we must keep the concepts of charge and oxidation numbers separate.

The rules for assigning oxidation numbers to atoms are as follows:

Atoms in their elemental state are assigned an oxidation number of 0.

Atoms in monatomic (i.e., one-atom) ions are assigned an oxidation number equal to their charge. Oxidation numbers are usually written with the sign first, then the magnitude, which differentiates them from charges.

In compounds, fluorine is assigned a −1 oxidation number; oxygen is usually assigned a −2 oxidation number (except in peroxide compounds [where it is −1] and in binary compounds with fluorine [where it is positive]); and hydrogen is usually assigned a +1 oxidation number (except when it exists as the hydride ion, H−, in which case rule 2 prevails).

In compounds, all other atoms are assigned an oxidation number so that the sum of the oxidation numbers on all the atoms in the species equals the charge on the species (which is zero if the species is neutral).

Let us work through a few examples for practice. In H2, both hydrogen atoms have an oxidation number of 0, by rule 1. In NaCl, sodium has an oxidation number of +1, while chlorine has an oxidation number of −1, by rule 2. In H2O, the hydrogen atoms each have an oxidation number of +1, while the oxygen has an oxidation number of −2, even though hydrogen and oxygen do not exist as ions in this compound as per rule 3. By contrast, by rule 3 in hydrogen peroxide (H2O2), each hydrogen atom has an oxidation number of +1, while each oxygen atom has an oxidation number of −1. We can use rule 4 to determine oxidation numbers for the atoms in SO2. Each oxygen atom has an oxidation number of −2; for the sum of the oxidation numbers to equal the charge on the species (which is zero), the sulfur atom is assigned an oxidation number of +4. Does this mean that the sulfur atom has a 4+ charge on it? No, it only means that the sulfur atom is assigned a +4 oxidation number by our rules of apportioning electrons among the atoms in a compound.

Example 13 Assign oxidation numbers to the atoms in each substance. Br2 SiO2 Ba(NO3)2 Solution Br2 is the elemental form of bromine. Therefore, by rule 1, each atom has an oxidation number of 0. By rule 3, oxygen is normally assigned an oxidation number of −2. For the sum of the oxidation numbers to equal the charge on the species (which is zero), the silicon atom is assigned an oxidation number of +4. The compound barium nitrate can be separated into two parts: the Ba2+ ion and the nitrate ion. Considering these separately, the Ba2+ ion has an oxidation number of +2 by rule 2. Now consider the NO3− ion. Oxygen is assigned an oxidation number of −2, and there are three oxygens. According to rule 4, the sum of the oxidation number on all atoms must equal the charge on the species, so we have the simple algebraic equation x + 3(−2) = −1 where x is the oxidation number of the nitrogen atom and −1 represents the charge on the species. Evaluating, x + (−6) = −1
x = +5 Thus, the oxidation number on the N atom in the nitrate ion is +5. Test Yourself Assign oxidation numbers to the atoms in H3PO4. Answer H = +1, O = −2, P = +5

All redox reactions occur with a simultaneous change in the oxidation numbers of some atoms. At least two elements must change their oxidation numbers. When an oxidation number of an atom is increased in the course of a redox reaction, that atom is being oxidized. When an oxidation number of an atom is decreased in the course of a redox reaction, that atom is being reduced. Oxidation and reduction are thus also defined in terms of increasing or decreasing oxidation numbers, respectively.

Example 14 Identify what is being oxidized and reduced in this redox equation. 2 Na + Cl2 → 2 NaCl Solution Consider the reactants. Because both reactants are the elemental forms of their atoms, the Na and Cl atoms as reactants have oxidation numbers of 0. In the ionic product, the sodium ions have an oxidation number of +1, while the chloride ions have an oxidation number of −1: We note that the sodium is increasing its oxidation number from 0 to +1, so it is being oxidized; chlorine is decreasing its oxidation number from 0 to −1, so it is being reduced: Because oxidation numbers are changing, this is a redox reaction. Note that the total number of electrons lost by the sodium (two, one lost from each atom) is gained by the chlorine atoms (two, one gained for each atom). Test Yourself Identify what is being oxidized and reduced in this redox equation. C + O2 → CO2 Answer C is being oxidized from 0 to +4; O is being reduced from 0 to −2.

In this introduction to oxidation-reduction reactions, we are using straightforward examples. However, oxidation reactions can become quite complex; the following equation represents a redox reaction:

To demonstrate that this is a redox reaction, the oxidation numbers of the species being oxidized and reduced are listed; can you determine what is being oxidized and what is being reduced? This is also an example of a net ionic reaction; spectator ions that do not change oxidation numbers are not displayed in the equation.

Key Takeaways

Oxidation-reduction (redox) reactions involve the transfer of electrons from one atom to another.

Oxidation numbers are used to keep track of electrons in atoms.

There are rules for assigning oxidation numbers to atoms.

Oxidation is an increase of oxidation number (a loss of electrons); reduction is a decrease in oxidation number (a gain of electrons).

Exercises

Is the reaction

2 K(s) + Br2(ℓ) → 2 KBr(s)

an oxidation-reduction reaction? Explain your answer.

Is the reaction

NaCl(aq) + AgNO3(aq) → NaNO3(aq) + AgCl(s)

an oxidation-reduction reaction? Explain your answer.

In the reaction

2 Ca(s) + O2(g) → 2 CaO

indicate what has lost electrons and what has gained electrons.

In the reaction

16 Fe(s) + 3 S8(s) → 8 Fe2S3(s)

indicate what has lost electrons and what has gained electrons.

In the reaction

2 Li(s) + O2(g) → Li2O2(s)

indicate what has been oxidized and what has been reduced.

In the reaction

2 Ni(s) + 3 I2(s) → 2 NiI3(s)

indicate what has been oxidized and what has been reduced.

What are two different definitions of oxidation?

What are two different definitions of reduction?

Assign oxidation numbers to each atom in each substance.

a) P4

b) SO2

c) SO22−

d) Ca(NO3)2

10. Assign oxidation numbers to each atom in each substance.

a) PF5

b) (NH4)2S

c) Hg

d) Li2O2 (lithium peroxide)

11. Assign oxidation numbers to each atom in each substance.

a) CO

b) CO2

c) NiCl2

d) NiCl3

12. Assign oxidation numbers to each atom in each substance.

a) NaH (sodium hydride)

b) NO2

c) NO2−

d) AgNO3

13. Assign oxidation numbers to each atom in each substance.

a) CH2O

b) NH3

c) Rb2SO4

d) Zn(C2H3O2)2

14. Assign oxidation numbers to each atom in each substance.

a) C6H6

b) B(OH)3

c) Li2S

d) Au

15. Identify what is being oxidized and reduced in this redox equation by assigning oxidation numbers to the atoms.

2 NO + Cl2 → 2 NOCl

16. Identify what is being oxidized and reduced in this redox equation by assigning oxidation numbers to the atoms.

Fe + SO3 → FeSO3

17. Identify what is being oxidized and reduced in this redox equation by assigning oxidation numbers to the atoms.

2 KrF2 + 2 H2O → 2 Kr + 4 HF + O2

18. Identify what is being oxidized and reduced in this redox equation by assigning oxidation numbers to the atoms.

SO3 + SCl2 → SOCl2 + SO2

19. Identify what is being oxidized and reduced in this redox equation by assigning oxidation numbers to the atoms.

2 K + MgCl2 → 2 KCl + Mg

20. Identify what is being oxidized and reduced in this redox equation by assigning oxidation numbers to the atoms.

C7H16 + 11 O2 → 7 CO2 + 8 H2O

Answers

1.

Yes; both K and Br are changing oxidation numbers.

3.

Ca has lost electrons, and O has gained electrons.

5.

Li has been oxidized, and O has been reduced.

7.

loss of electrons; increase in oxidation number

9.

a) P: 0

b) S: +4; O: −2

c) S: +2; O: −2

d) Ca: 2+; N: +5; O: −2

11.

a) C: +2; O: −2

b) C: +4; O: −2

c) Ni: +2; Cl: −1

d) Ni: +3; Cl: −1

13.

a) C: 0; H: +1; O: −2

b) N: −3; H: +1

c) Rb: +1; S: +6; O: −2

d) Zn: +2; C: 0; H: +1; O: −2

15.

N is being oxidized, and Cl is being reduced.

17.

O is being oxidized, and Kr is being reduced.

19.

K is being oxidized, and Mg is being reduced.

Chapter 32

5.7 End-of-Chapter Material

Additional Exercises

Chemical equations can also be used to represent physical processes. Write a chemical reaction for the boiling of water, including the proper phase labels.

Chemical equations can also be used to represent physical processes. Write a chemical reaction for the freezing of water, including the proper phase labels.

Explain why

4 Na(s) + 2 Cl2(g) → 4 NaCl(s)

should not be considered a proper chemical equation.

Explain why

H2(g) + 1/2 O2(g) → H2O(ℓ)

should not be considered a proper chemical equation.

Does the chemical reaction represented by

3 Zn(s) + 2 Al(NO3)3(aq) → 3 Zn(NO3)2(aq) + 2 Al(s)

proceed as written? Why or why not?

Does the chemical reaction represented by

2 Au(s) + 2 HNO3(aq) → 2 AuNO3(aq) + H2(g)

proceed as written? Gold is a relatively useful metal for certain applications, such as jewelry and electronics. Does your answer suggest why this is so?

Explain what is wrong with this double-replacement reaction.

NaCl(aq) + KBr(aq) → NaK(aq) + ClBr(aq)

Predict the products of and balance this double-replacement reaction.

Ag2SO4(aq) + SrCl2(aq) → ?

Write the complete and net ionic equations for this double-replacement reaction.

BaCl2(aq) + Ag2SO4(aq) → ?

Write the complete and net ionic equations for this double-replacement reaction.

Ag2SO4(aq) + SrCl2(aq) → ?

Identify the spectator ions in this reaction. What is the net ionic equation?

NaCl(aq) + KBr(aq) → NaBr(aq) + KCl(aq)

Complete this reaction and identify the spectator ions. What is the net ionic equation?

3 H2SO4(aq) + 2 Al(OH)3(s) → ?

Can a reaction be a composition reaction and a redox reaction at the same time? Give an example to support your answer.

Can a reaction be a combustion reaction and a redox reaction at the same time? Give an example to support your answer.

Can a reaction be a decomposition reaction and a redox reaction at the same time? Give an example to support your answer.

Can a reaction be a combustion reaction and a double-replacement reaction at the same time? Give an example to support your answer.

Why is CH4 not normally considered an acid?

Methyl alcohol has the formula CH3OH. Why would methyl alcohol not normally be considered a base?

What are the oxidation numbers of the nitrogen atoms in these substances?

a) N2

b) NH3

c) NO

d) N2O

e) NO2

f) N2O4

g) N2O5

h) NaNO3

20. What are the oxidation numbers of the sulfur atoms in these substances?

a) SF6

b) Na2SO4

c) K2SO3

d) SO3

e) SO2

f) S8

g) Na2S

21. Disproportion is a type of redox reaction in which the same substance is both oxidized and reduced. Identify the element that is disproportionating and indicate the initial and final oxidation numbers of that element.

2 CuCl(aq) → CuCl2(aq) + Cu(s)

22. Disproportion is a type of redox reaction in which the same substance is both oxidized and reduced. Identify the element that is disproportionating and indicate the initial and final oxidation numbers of that element.

3 Cl2(g) + 6 OH−(aq) → 5 Cl−(aq) + ClO3−(aq) + 3 H2O(ℓ)

Answers

1.

H2O(ℓ) → H2O(g)

3.

The coefficients are not in their lowest whole-number ratio.

5.

No; zinc is lower in the activity series than aluminum.

7.

In the products, the cation is pairing with the cation, and the anion is pairing with the anion.

9.

Complete ionic equation: Ba2+(aq) + 2 Cl−(aq) + 2 Ag+(aq) + SO42−(aq) → BaSO4(s) + 2 AgCl(s)

Net ionic equation: The net ionic equation is the same as the complete ionic equation.

11.

Each ion is a spectator ion; there is no overall net ionic equation.

13.

Yes; H2 + Cl2 → 2 HCl (answers will vary)

15.

Yes; 2 HCl → H2 + Cl2 (answers will vary)

17.

It does not increase the H+ ion concentration; it is not a compound of H+.

19.

a) 0

b) −3

c) +2

d) +1

e) +4

f) +4

g) +5

h) +5

21.

Copper is disproportionating. Initially, its oxidation number is +1; in the products, its oxidation numbers are +2 and 0, respectively.

PART IV

Unit 4 Stoichiometry

Chapter 33

Chapter 6. Stoichiometry and the Mole

Introduction to Stoichiometry and the Mole

At Contrived State University in Anytown, Ohio, a new building was dedicated in March 2010 to house the College of Education. The 100,000-square-foot building has enough office space to accommodate 86 full-time faculty members and 167 full-time staff.

In a fit of monetary excess, the university administration offered to buy new furniture (desks and chairs) and computer workstations for all faculty and staff members moving into the new building. However, to save on long-term energy and materials costs, the university offered to buy only 1 laser printer per 10 employees, with the plan to network the printers together.

How many laser printers did the administration have to buy? It is rather simple to show that 26 laser printers are needed for all the employees. However, what if a chemist was calculating quantities for a chemical reaction? Interestingly enough, similar calculations can be performed for chemicals as well as laser printers.

In filling a new office building with furniture and equipment, managers do calculations similar to those performed by scientists doing chemical reactions.

We have already established that quantities are important in science, especially in chemistry. It is important to make accurate measurements of a variety of quantities when performing experiments. However, it is also important to be able to relate one measured quantity to another, unmeasured quantity. In this chapter, we will consider how we manipulate quantities to relate them to each other.

Chapter 34

6.1 Stoichiometry

Learning Objectives

Define stoichiometry.

Relate quantities in a balanced chemical reaction on a molecular basis.

Consider a classic recipe for pound cake: 1 pound of eggs, 1 pound of butter, 1 pound of flour, and 1 pound of sugar. (That’s why it’s called “pound cake.”) If you have 4 pounds of butter, how many pounds of sugar, flour, and eggs do you need? You would need 4 pounds each of sugar, flour, and eggs.

Now suppose you have 1.00 g H2. If the chemical reaction follows the balanced chemical equation

2 H2(g) + O2(g) → 2 H2O(ℓ)

then what mass of oxygen do you need to make water?

Curiously, this chemical reaction question is very similar to the pound cake question. Both of them involve relating a quantity of one substance to a quantity of another substance or substances. The relating of one chemical substance to another using a balanced chemical reaction is called stoichiometry. Using stoichiometry is a fundamental skill in chemistry; it greatly broadens your ability to predict what will occur and, more importantly, how much is produced.

Let us consider a more complicated example. A recipe for pancakes calls for 2 cups (c) of pancake mix, 1 egg, and 1/2 c of milk. We can write this in the form of a chemical equation:

2 c mix + 1 egg + 1/2 c milk → 1 batch of pancakes

If you have 9 c of pancake mix, how many eggs and how much milk do you need? It might take a little bit of work, but eventually you will find you need 4½ eggs and 2¼ c milk.

How can we formalize this? We can make a conversion factor using our original recipe and use that conversion factor to convert from a quantity of one substance to a quantity of another substance, similar to the way we constructed a conversion factor between feet and yards in Chapter 2 “Measurements”. Because one recipe’s worth of pancakes requires 2 c of pancake mix, 1 egg, and 1/2 c of milk, we actually have the following mathematical relationships that relate these quantities:

2 c pancake mix ⇔ 1 egg ⇔ 1/2 c milk

where ⇔ is the mathematical symbol for “is equivalent to.” This does not mean that 2 c of pancake mix equal 1 egg. However, as far as this recipe is concerned, these are the equivalent quantities needed for a single recipe of pancakes. So, any possible quantities of two or more ingredients must have the same numerical ratio as the ratios in the equivalence.

We can deal with these equivalences in the same way we deal with equalities in unit conversions: we can make conversion factors that essentially equal 1. For example, to determine how many eggs we need for 9 c of pancake mix, we construct the conversion factor:

This conversion factor is, in a strange way, equivalent to 1 because the recipe relates the two quantities. Starting with our initial quantity and multiplying by our conversion factor,

Note how the units cups pancake mix canceled, leaving us with units of eggs. This is the formal, mathematical way of getting our amounts to mix with 9 c of pancake mix. We can use a similar conversion factor for the amount of milk:

Again, units cancel, and new units are introduced.

A balanced chemical equation is nothing more than a recipe for a chemical reaction. The difference is that a balanced chemical equation is written in terms of atoms and molecules, not cups, pounds, and eggs.

For example, consider the following chemical equation:

2 H2(g) + O2(g) → 2 H2O(ℓ)

We can interpret this as, literally, “two hydrogen molecules react with one oxygen molecule to make two water molecules.” That interpretation leads us directly to some equivalences, just as our pancake recipe did:

2 H2 molecules ⇔ 1 O2 molecule ⇔ 2 H2O molecules

These equivalences allow us to construct conversion factors:

and so forth. These conversions can be used to relate quantities of one substance to quantities of another. For example, suppose we need to know how many molecules of oxygen are needed to react with 16 molecules of H2. As we did with converting units, we start with our given quantity and use the appropriate conversion factor:

Note how the unit molecules H2 cancels algebraically, just as any unit does in a conversion like this. The conversion factor came directly from the coefficients in the balanced chemical equation. This is another reason why a properly balanced chemical equation is important.

Example 1 How many molecules of SO3 are needed to react with 144 molecules of Fe2O3 given this balanced chemical equation? Fe2O3(s) + 3SO3(g) → Fe2(SO4)3 Solution We use the balanced chemical equation to construct a conversion factor between Fe2O3 and SO3. The number of molecules of Fe2O3 goes on the bottom of our conversion factor so it cancels with our given amount, and the molecules of SO3 go on the top. Thus, the appropriate conversion factor is Starting with our given amount and applying the conversion factor, the result is We need 432 molecules of SO3 to react with 144 molecules of Fe2O3. Test Yourself How many molecules of H2 are needed to react with 29 molecules of N2 to make ammonia if the balanced chemical equation is N2 + 3H2 → 2NH3? Answer 87 molecules

Chemical equations also allow us to make conversions regarding the number of atoms in a chemical reaction because a chemical formula lists the number of atoms of each element in a compound. The formula H2O indicates that there are two hydrogen atoms and one oxygen atom in each molecule, and these relationships can be used to make conversion factors:

Conversion factors like this can also be used in stoichiometry calculations.

Example 2 How many molecules of NH3 can you make if you have 228 atoms of H2? Solution From the formula, we know that one molecule of NH3 has three H atoms. Use that fact as a conversion factor: Test Yourself How many molecules of Fe2(SO4)3 can you make from 777 atoms of S? Answer 259 molecules

Video Source: Stiochiometry by keyj (https://viuvideos.viu.ca/media/Stoichiometry/0_b6t2h6o2)

Key Takeaway

Quantities of substances can be related to each other using balanced chemical equations.

Exercises

Think back to the pound cake recipe. What possible conversion factors can you construct relating the components of the recipe?

Think back to the pancake recipe. What possible conversion factors can you construct relating the components of the recipe?

What are all the conversion factors that can be constructed from the balanced chemical reaction 2H2(g) + O2(g) → 2H2O(ℓ)?

What are all the conversion factors that can be constructed from the balanced chemical reaction N2(g) + 3H2(g) → 2NH3(g)?

Given the chemical equation

Na(s) + H2O(ℓ) → NaOH(aq) + H2(g)

a) Balance the equation.

b) How many molecules of H2 are produced when 332 atoms of Na react?

6. Given the chemical equation

S(s) + O2(g) → SO3(g)

a) Balance the equation.

b) How many molecules of O2 are needed when 38 atoms of S react?

7. For the balanced chemical equation

6 H+(aq) + 2 MnO4−(aq) + 5 H2O2(ℓ) → 2 Mn2+(aq) + 5 O2(g) + 8 H2O(ℓ)

how many molecules of H2O are produced when 75 molecules of H2O2 react?

8. For the balanced chemical reaction

2 C6H6(ℓ) + 15 O2(g) → 12 CO2(g) + 6 H2O(ℓ)

how many molecules of CO2 are produced when 56 molecules of C6H6 react?

9. Given the balanced chemical equation

Fe2O3(s) + 3SO3(g) → Fe2(SO4)3

how many molecules of Fe2(SO4)3 are produced if 321 atoms of S are reacted?

10. For the balanced chemical equation

CuO(s) + H2S(g) → CuS + H2O(ℓ)

how many molecules of CuS are formed if 9,044 atoms of H react?

11. For the balanced chemical equation

Fe2O3(s) + 3 SO3(g) → Fe2(SO4)3

suppose we need to make 145,000 molecules of Fe2(SO4)3. How many molecules of SO3 do we need?

12. One way to make sulfur hexafluoride is to react thioformaldehyde, CH2S, with elemental fluorine:

CH2S + 6 F2 → CF4 + 2 HF + SF6

If 45,750 molecules of SF6 are needed, how many molecules of F2 are required?

13. Construct the three independent conversion factors possible for these two reactions:

2 H2 + O2 → 2 H2O

H2 + O2 → H2O2

Why are the ratios between H2 and O2 different?

The conversion factors are different because the stoichiometries of the balanced chemical reactions are different.

14. Construct the three independent conversion factors possible for these two reactions:

2 Na + Cl2 → 2 NaCl

4 Na + 2 Cl2 → 4 NaCl

What similarities, if any, exist in the conversion factors from these two reactions?

Answers

1.

are two conversion factors that can be constructed from the pound cake recipe. Other conversion factors are also possible.

3.

and their reciprocals are the conversion factors that can be constructed.

5.

2Na(s) + 2H2O(ℓ) → 2NaOH(aq) + H2(g) and 166 molecules

Chapter 35

6.2 The Mole

Learning Objectives

Describe the unit mole.

Relate the mole quantity of substance to its mass.

So far, we have been talking about chemical substances in terms of individual atoms and molecules. Yet we don’t typically deal with substances an atom or a molecule at a time; we work with millions, billions, and trillions of atoms and molecules at a time. What we need is a way to deal with macroscopic, rather than microscopic, amounts of matter. We need a unit of amount that relates quantities of substances on a scale that we can interact with.

Chemistry uses a unit called mole. A mole (mol) is a number of things equal to the number of atoms in exactly 12 g of carbon-12. Experimental measurements have determined that this number is very large:

1 mol = 6.02214179 × 1023 things

Understand that a mole means a number of things, just like a dozen means a certain number of things—twelve, in the case of a dozen. But a mole is a much larger number of things. These things can be atoms, or molecules, or eggs; however, in chemistry, we usually use the mole to refer to the amounts of atoms or molecules. Although the number of things in a mole is known to eight decimal places, it is usually fine to use only two or three decimal places in calculations. The numerical value of things in a mole is often called Avogadro’s number (NA), which is also known as the Avogadro constant, after Amadeo Avogadro, an Italian chemist who first proposed its importance.

Example 3 How many molecules are present in 2.76 mol of H2O? How many atoms is this? Solution The definition of a mole is an equality that can be used to construct a conversion factor. Also, because we know that there are three atoms in each molecule of H2O, we can also determine the number of atoms in the sample. To determine the total number of atoms, we have Test Yourself How many molecules are present in 4.61 × 10−2 mol of O2? Answer 2.78 × 1022 molecules

How big is a mole? It is very large. Suppose you had a mole of dollar bills that need to be counted. If everyone on earth (about 6 billion people) counted one bill per second, it would take about 3.2 million years to count all the bills. A mole of sand would fill a cube about 32 km on a side. A mole of pennies stacked on top of each other would have about the same diameter as our galaxy, the Milky Way. A mole is a lot of things—but atoms and molecules are very tiny. One mole of carbon atoms would make a cube that is 1.74 cm on a side, small enough to carry in your pocket.

Why is the mole unit so important? It represents the link between the microscopic and the macroscopic, especially in terms of mass. A mole of a substance has the same mass in grams as one unit (atom or molecules) has in atomic mass units. The mole unit allows us to express amounts of atoms and molecules in visible amounts that we can understand.

For example, we already know that, by definition, a mole of carbon has a mass of exactly 12 g. This means that exactly 12 g of C has 6.022 × 1023 atoms:

12 g C = 6.022 × 1023 atoms C

We can use this equality as a conversion factor between the number of atoms of carbon and the number of grams of carbon. How many grams are there, say, in 1.50 × 1025 atoms of carbon? This is a one-step conversion:

But it also goes beyond carbon. Previously we defined atomic and molecular masses as the number of atomic mass units per atom or molecule. Now we can do so in terms of grams. The atomic mass of an element is the number of grams in 1 mol of atoms of that element, while the molecular mass of a compound is the number of grams in 1 mol of molecules of that compound. Sometimes these masses are called molar masses to emphasize the fact that they are the mass for 1 mol of things. (The term molar is the adjective form of mole and has nothing to do with teeth.)

Here are some examples. The mass of a hydrogen atom is 1.0079 u; the mass of 1 mol of hydrogen atoms is 1.0079 g. Elemental hydrogen exists as a diatomic molecule, H2. One molecule has a mass of 1.0079 + 1.0079 = 2.0158 u, while 1 mol H2 has a mass of 2.0158 g. A molecule of H2O has a mass of about 18.01 u; 1 mol H2O has a mass of 18.01 g. A single unit of NaCl has a mass of 58.45 u; NaCl has a molar mass of 58.45 g. In each of these moles of substances, there are 6.022 × 1023 units: 6.022 × 1023 atoms of H, 6.022 × 1023 molecules of H2 and H2O, 6.022 × 1023 units of NaCl ions. These relationships give us plenty of opportunities to construct conversion factors for simple calculations.

Example 4 What is the molar mass of C6H12O6? Solution To determine the molar mass, we simply add the atomic masses of the atoms in the molecular formula but express the total in grams per mole, not atomic mass units. The masses of the atoms can be taken from the periodic table or the list of elements in “Appendix: Periodic Table of the Elements”:	6 C = 6 × 12.011	= 72.066
12 H = 12 × 1.0079	= 12.0948
6 O = 6 × 15.999	= 95.994
TOTAL	= 180.155 g/mol
Per convention, the unit grams per mole is written as a fraction. Test Yourself What is the molar mass of AgNO3? Answer 169.87 g/mol

Knowing the molar mass of a substance, we can calculate the number of moles in a certain mass of a substance and vice versa, as these examples illustrate. The molar mass is used as the conversion factor.

Example 5 What is the mass of 3.56 mol of HgCl2? The molar mass of HgCl2 is 271.49 g/mol. Solution Use the molar mass as a conversion factor between moles and grams. Because we want to cancel the mole unit and introduce the gram unit, we can use the molar mass as given: Test Yourself What is the mass of 33.7 mol of H2O? Answer 607 g

Example 6 How many moles of H2O are present in 240.0 g of water (about the mass of a cup of water)? Solution Use the molar mass of H2O as a conversion factor from mass to moles. The molar mass of water is (1.0079 + 1.0079 + 15.999) = 18.015 g/mol. However, because we want to cancel the gram unit and introduce moles, we need to take the reciprocal of this quantity, or 1 mol/18.015 g: Test Yourself How many moles are present in 35.6 g of H2SO4 (molar mass = 98.08 g/mol)? Answer 0.363 mol

Other conversion factors can be combined with the definition of mole—density, for example.

Example 7 The density of ethanol is 0.789 g/mL. How many moles are in 100.0 mL of ethanol? The molar mass of ethanol is 46.08 g/mol. Solution Here, we use density to convert from volume to mass and then use the molar mass to determine the number of moles. Test Yourself If the density of benzene, C6H6, is 0.879 g/mL, how many moles are present in 17.9 mL of benzene? Answer 0.201 mol

Key Takeaways

The mole is a key unit in chemistry.

The molar mass of a substance, in grams, is numerically equal to one atom’s or molecule’s mass in atomic mass units.

Exercises

How many atoms are present in 4.55 mol of Fe?

How many atoms are present in 0.0665 mol of K?

How many molecules are present in 2.509 mol of H2S?

How many molecules are present in 0.336 mol of acetylene (C2H2)?

How many moles are present in 3.55 × 1024 Pb atoms?

How many moles are present in 2.09 × 1022 Ti atoms?

How many moles are present in 1.00 × 1023 PF3 molecules?

How many moles are present in 5.52 × 1025 penicillin molecules?

Determine the molar mass of each substance.

a) Si

b) SiH4

c) K2O

10. Determine the molar mass of each substance.

a) Cl2

b) SeCl2

c) Ca(C2H3O2)2

11. Determine the molar mass of each substance.

a) Al

b) Al2O3

c) CoCl3

12. Determine the molar mass of each substance.

a) O3

b) NaI

c) C12H22O11

13. What is the mass of 4.44 mol of Rb?

14. What is the mass of 0.311 mol of Xe?

15. What is the mass of 12.34 mol of Al2(SO4)3?

16. What is the mass of 0.0656 mol of PbCl2?

17. How many moles are present in 45.6 g of CO?

18. How many moles are present in 0.00339 g of LiF?

19. How many moles are present in 1.223 g of SF6?

20. How many moles are present in 48.8 g of BaCO3?

21. How many moles are present in 54.8 mL of mercury if the density of mercury is 13.6 g/mL?

22. How many moles are present in 56.83 mL of O2 if the density of O2 is 0.00133 g/mL?

Answers

2.74 × 10

atoms

1.511 × 10

molecules

90 mol

0.166 mol

9.

a) 28.086 g

b) 32.118 g

c) 94.195 g

11.

a) 26.981 g

b) 101.959 g

c) 165.292 g

379 g

4,222 g

1.63 mol

0.008374 mol

3.72 mol

Chapter 36

6.3 The Mole in Chemical Reactions

Learning Objectives

Balance a chemical equation in terms of moles.

Use the balanced equation to construct conversion factors in terms of moles.

Calculate moles of one substance from moles of another substance using a balanced chemical equation.

Consider this balanced chemical equation:

2 H2 + O2 → 2 H2O

We interpret this as “two molecules of hydrogen react with one molecule of oxygen to make two molecules of water.” The chemical equation is balanced as long as the coefficients are in the ratio 2:1:2. For instance, this chemical equation is also balanced:

100 H2 + 50 O2 → 100 H2O

This equation is not conventional—because convention says that we use the lowest ratio of coefficients—but it is balanced. So is this chemical equation:

5,000 H2 + 2,500 O2 → 5,000 H2O

Again, this is not conventional, but it is still balanced. Suppose we use a much larger number:

12.044 × 1023 H2 + 6.022 × 1023 O2 → 12.044 × 1023 H2O

These coefficients are also in the ratio of 2:1:2. But these numbers are related to the number of things in a mole: the first and last numbers are two times Avogadro’s number, while the second number is Avogadro’s number. That means that the first and last numbers represent 2 mol, while the middle number is just 1 mol. Well, why not just use the number of moles in balancing the chemical equation?

2 H2 + O2 → 2 H2O

is the same balanced chemical equation we started with! What this means is that chemical equations are not just balanced in terms of molecules; they are also balanced in terms of moles. We can just as easily read this chemical equation as “two moles of hydrogen react with one mole of oxygen to make two moles of water.” All balanced chemical reactions are balanced in terms of moles.

Example 8 Interpret this balanced chemical equation in terms of moles. P4 + 5 O2 → P4O10 Solution The coefficients represent the number of moles that react, not just molecules. We would speak of this equation as “one mole of molecular phosphorus reacts with five moles of elemental oxygen to make one mole of tetraphosphorus decoxide.” Test Yourself Interpret this balanced chemical equation in terms of moles. N2 + 3 H2 → 2 NH3 Answer One mole of elemental nitrogen reacts with three moles of elemental hydrogen to produce two moles of ammonia.

In Chapter 5 “Chemical Reactions and Equations”, Section 5.1 “The Chemical Equation”, we stated that a chemical equation is simply a recipe for a chemical reaction. As such, chemical equations also give us equivalences—equivalences between the reactants and the products. However, now we understand that these equivalences are expressed in terms of moles. Consider the chemical equation

2 H2 + O2 → 2 H2O

This chemical reaction gives us the following equivalences:

2 mol H2 ⇔ 1 mol O2 ⇔ 2 mol H2O

Any two of these quantities can be used to construct a conversion factor that lets us relate the number of moles of one substance to an equivalent number of moles of another substance. If, for example, we want to know how many moles of oxygen will react with 17.6 mol of hydrogen, we construct a conversion factor between 2 mol of H2 and 1 mol of O2 and use it to convert from moles of one substance to moles of another:

Note how the mol H2 unit cancels, and mol O2 is the new unit introduced. This is an example of a mole-mole calculation, when you start with moles of one substance and convert to moles of another substance by using the balanced chemical equation. The example may seem simple because the numbers are small, but numbers won’t always be so simple!

Example 9 For the balanced chemical equation 2 C4H10(g) + 13 O2 → 8 CO2(g) + 10 H2O(ℓ) if 154 mol of O2 are reacted, how many moles of CO2 are produced? Solution We are relating an amount of oxygen to an amount of carbon dioxide, so we need the equivalence between these two substances. According to the balanced chemical equation, the equivalence is 13 mol O2 ⇔ 8 mol CO2 We can use this equivalence to construct the proper conversion factor. We start with what we are given and apply the conversion factor: The mol O2 unit is in the denominator of the conversion factor so it cancels. Both the 8 and the 13 are exact numbers, so they don’t contribute to the number of significant figures in the final answer. Test Yourself Using the above equation, how many moles of H2O are produced when 154 mol of O2 react? Answer 118 mol

It is important to reiterate that balanced chemical equations are balanced in terms of moles. Not grams, kilograms, or liters—but moles. Any stoichiometry problem will likely need to work through the mole unit at some point, especially if you are working with a balanced chemical reaction.

Key Takeaways

Balanced chemical reactions are balanced in terms of moles.

A balanced chemical reaction gives equivalences in moles that allow stoichiometry calculations to be performed.

Exercises

Express in mole terms what this chemical equation means.

CH4 + 2O2 → CO2 + 2H2O

Express in mole terms what this chemical equation means.

Na2CO3 + 2HCl → 2NaCl + H2O + CO2

How many molecules of each substance are involved in the equation in Exercise 1 if it is interpreted in terms of moles?

How many molecules of each substance are involved in the equation in Exercise 2 if it is interpreted in terms of moles?

For the chemical equation

2 C2H6 + 7 O2 → 4 CO2 + 6 H2O

what equivalences can you write in terms of moles? Use the ⇔ sign.

For the chemical equation

2 Al + 3 Cl2 → 2 AlCl3

what equivalences can you write in terms of moles? Use the ⇔ sign.

Write the balanced chemical reaction for the combustion of C5H12 (the products are CO2 and H2O) and determine how many moles of H2O are formed when 5.8 mol of O2 are reacted.

Write the balanced chemical reaction for the formation of Fe2(SO4)3 from Fe2O3 and SO3 and determine how many moles of Fe2(SO4)3 are formed when 12.7 mol of SO3 are reacted.

For the balanced chemical equation

3 Cu(s) + 2 NO3−(aq) + 8 H+(aq) → 3 Cu2+(aq) + 4 H2O(ℓ) + 2 NO(g)

how many moles of Cu2+ are formed when 55.7 mol of H+ are reacted?

For the balanced chemical equation

Al(s) + 3 Ag+(aq) → Al3+(aq) + 3 Ag(s)

how many moles of Ag are produced when 0.661 mol of Al are reacted?

For the balanced chemical reaction

4 NH3(g) + 5 O2(g) → 4 NO(g) + 6 H2O(ℓ)

how many moles of H2O are produced when 0.669 mol of NH3 react?

For the balanced chemical reaction

4 NaOH(aq) + 2 S(s) + 3 O2(g) → 2 Na2SO4(aq) + 2 H2O(ℓ)

how many moles of Na2SO4 are formed when 1.22 mol of O2 react?

For the balanced chemical reaction

4 KO2(s) + 2 CO2(g) → 2 K2CO3(s) + 3 O2(g)

determine the number of moles of both products formed when 6.88 mol of KO2 react.

For the balanced chemical reaction

2 AlCl3 + 3 H2O(ℓ) → Al2O3 + 6 HCl(g)

determine the number of moles of both products formed when 0.0552 mol of AlCl3 react.

Answers

1.

One mole of CH4 reacts with 2 mol of O2 to make 1 mol of CO2 and 2 mol of H2O.

3.

6.022 × 1023 molecules of CH4, 1.2044 × 1024 molecules of O2, 6.022 × 1023 molecules of CO2, and 1.2044 × 1024 molecules of H2O

5.

2 mol of C2H6 ⇔ 7 mol of O2 ⇔ 4 mol of CO2 ⇔ 6 mol of H2O

7.

C5H12 + 😯2 → 5CO2 + 6H2O; 4.4 mol

9.

20.9 mol

11.

1.00 mol

13.

3.44 mol of K2CO3; 5.16 mol of O2

Chapter 37

6.4 Mole-Mass and Mass-Mass Calculations

Learning Objectives

From a given number of moles of a substance, calculate the mass of another substance involved using the balanced chemical equation.

From a given mass of a substance, calculate the moles of another substance involved using the balanced chemical equation.

From a given mass of a substance, calculate the mass of another substance involved using the balanced chemical equation.

Mole-mole calculations are not the only type of calculations that can be performed using balanced chemical equations. Recall that the molar mass can be determined from a chemical formula and used as a conversion factor. We can add that conversion factor as another step in a calculation to make a mole-mass calculation, where we start with a given number of moles of a substance and calculate the mass of another substance involved in the chemical equation, or vice versa.

For example, suppose we have the balanced chemical equation

2 Al + 3 Cl2 → 2 AlCl3

Suppose we know we have 123.2 g of Cl2. How can we determine how many moles of AlCl3 we will get when the reaction is complete? First and foremost, chemical equations are not balanced in terms of grams; they are balanced in terms of moles. So to use the balanced chemical equation to relate an amount of Cl2 to an amount of AlCl3, we need to convert the given amount of Cl2 into moles. We know how to do this by simply using the molar mass of Cl2 as a conversion factor. The molar mass of Cl2 (which we get from the atomic mass of Cl from the periodic table) is 70.90 g/mol. We must invert this fraction so that the units cancel properly:

Now that we have the quantity in moles, we can use the balanced chemical equation to construct a conversion factor that relates the number of moles of Cl2 to the number of moles of AlCl3. The numbers in the conversion factor come from the coefficients in the balanced chemical equation:

Using this conversion factor with the molar quantity we calculated above, we get

So, we will get 1.159 mol of AlCl3 if we react 123.2 g of Cl2.

In this last example, we did the calculation in two steps. However, it is mathematically equivalent to perform the two calculations sequentially on one line:

The units still cancel appropriately, and we get the same numerical answer in the end. Sometimes the answer may be slightly different from doing it one step at a time because of rounding of the intermediate answers, but the final answers should be effectively the same.

Example 10 How many moles of HCl will be produced when 249 g of AlCl3 are reacted according to this chemical equation? 2 AlCl3 + 3 H2O(ℓ) → Al2O3 + 6 HCl(g) Solution We will do this in two steps: convert the mass of AlCl3 to moles and then use the balanced chemical equation to find the number of moles of HCl formed. The molar mass of AlCl3 is 133.33 g/mol, which we have to invert to get the appropriate conversion factor: Now we can use this quantity to determine the number of moles of HCl that will form. From the balanced chemical equation, we construct a conversion factor between the number of moles of AlCl3 and the number of moles of HCl: Applying this conversion factor to the quantity of AlCl3, we get Alternatively, we could have done this in one line: The last digit in our final answer is slightly different because of rounding differences, but the answer is essentially the same. Test Yourself How many moles of Al2O3 will be produced when 23.9 g of H2O are reacted according to this chemical equation? 2 AlCl3 + 3 H2O(ℓ) → Al2O3 + 6 HCl(g) Answer 0.442 mol

A variation of the mole-mass calculation is to start with an amount in moles and then determine an amount of another substance in grams. The steps are the same but are performed in reverse order.

Example 11 How many grams of NH3 will be produced when 33.9 mol of H2 are reacted according to this chemical equation? N2(g) + 3 H2(g) → 2 NH3(g) Solution The conversions are the same, but they are applied in a different order. Start by using the balanced chemical equation to convert to moles of another substance and then use its molar mass to determine the mass of the final substance. In two steps, we have Now, using the molar mass of NH3, which is 17.03 g/mol, we get Test Yourself How many grams of N2 are needed to produce 2.17 mol of NH3 when reacted according to this chemical equation? N2(g) + 3 H2(g) → 2 NH3(g) Answer 30.4 g (Note: here we go from a product to a reactant, showing that mole-mass problems can begin and end with any substance in the chemical equation.)

It should be a trivial task now to extend the calculations to mass-mass calculations, in which we start with a mass of some substance and end with the mass of another substance in the chemical reaction. For this type of calculation, the molar masses of two different substances must be used—be sure to keep track of which is which. Again, however, it is important to emphasize that before the balanced chemical reaction is used, the mass quantity must first be converted to moles. Then the coefficients of the balanced chemical reaction can be used to convert to moles of another substance, which can then be converted to a mass.

For example, let us determine the number of grams of SO3 that can be produced by the reaction of 45.3 g of SO2 and O2:

2 SO2(g) + O2(g) → 2 SO3(g)

First, we convert the given amount, 45.3 g of SO2, to moles of SO2 using its molar mass (64.06 g/mol):

Second, we use the balanced chemical reaction to convert from moles of SO2 to moles of SO3:

Finally, we use the molar mass of SO3 (80.06 g/mol) to convert to the mass of SO3:

We can also perform all three steps sequentially, writing them on one line as

We get the same answer. Note how the initial and all the intermediate units cancel, leaving grams of SO3, which is what we are looking for, as our final answer.

Example 12 What mass of Mg will be produced when 86.4 g of K are reacted? MgCl2(s) + 2 K(s) → Mg(s) + 2 KCl(s) Solution We will simply follow the steps mass K → mol K → mol Mg → mass Mg In addition to the balanced chemical equation, we need the molar masses of K (39.09 g/mol) and Mg (24.31 g/mol). In one line, Test Yourself What mass of H2 will be produced when 122 g of Zn are reacted? Zn(s) + 2 HCl(aq) → ZnCl2(aq) + H2(g) Answer 3.77 g

Key Takeaways

Mole quantities of one substance can be related to mass quantities using a balanced chemical equation.

Mass quantities of one substance can be related to mass quantities using a balanced chemical equation.

In all cases, quantities of a substance must be converted to moles before the balanced chemical equation can be used to convert to moles of another substance.

Exercises

What mass of CO2 is produced by the combustion of 1.00 mol of CH4?

CH4(g) + 2 O2(g) → CO2(g) + 2 H2O(ℓ)

What mass of H2O is produced by the combustion of 1.00 mol of CH4?

CH4(g) + 2 O2(g) → CO2(g) + 2 H2O(ℓ)

What mass of HgO is required to produce 0.692 mol of O2?

2 HgO(s) → 2 Hg(ℓ) + O2(g)

What mass of NaHCO3 is needed to produce 2.659 mol of CO2?

2 NaHCO3(s) → Na2CO3(s) + H2O(ℓ) + CO2(g)

How many moles of Al can be produced from 10.87 g of Ag?

Al(NO3) 3(s) + 3 Ag → Al + 3 AgNO3

How many moles of HCl can be produced from 0.226 g of SOCl2?

SOCl2(ℓ) + H2O(ℓ) → SO2(g) + 2HCl(g)

How many moles of O2 are needed to prepare 1.00 g of Ca(NO3)2?

Ca(s) + N2(g) + 3 O2(g) → Ca(NO3) 2(s)

How many moles of C2H5OH are needed to generate 106.7 g of H2O?

C2H5OH(ℓ) + 3 O2(g) → 2 CO2(g) + 3 H2O(ℓ)

What mass of O2 can be generated by the decomposition of 100.0 g of NaClO3?

2 NaClO3 → 2 NaCl(s) + 3 O2(g)

What mass of Li2O is needed to react with 1,060 g of CO2?

Li2O(aq) + CO2(g) → Li2CO3(aq)

What mass of Fe2O3 must be reacted to generate 324 g of Al2O3?

Fe2O3(s) + 2 Al(s) → 2 Fe(s) + Al2O3(s)

What mass of Fe is generated when 100.0 g of Al are reacted?

Fe2O3(s) + 2 Al(s) → 2 Fe(s) + Al2O3(s)

What mass of MnO2 is produced when 445 g of H2O are reacted?

H2O(ℓ) + 2 MnO4−(aq) + Br−(aq) → BrO3−(aq) + 2 MnO2(s) + 2 OH−(aq)

What mass of PbSO4 is produced when 29.6 g of H2SO4 are reacted?

Pb(s) + PbO2(s) + 2 H2SO4(aq) → 2 PbSO4(s) + 2 H2O(ℓ)

If 83.9 g of ZnO are formed, what mass of Mn2O3 is formed with it?

Zn(s) + 2 MnO2(s) → ZnO(s) + Mn2O3(s)

If 14.7 g of NO2 are reacted, what mass of H2O is reacted with it?

3 NO2(g) + H2O(ℓ) → 2 HNO3(aq) + NO(g)

If 88.4 g of CH2S are reacted, what mass of HF is produced?

CH2S + 6 F2 → CF4 + 2 HF + SF6

If 100.0 g of Cl2 are needed, what mass of NaOCl must be reacted?

NaOCl + HCl → NaOH + Cl2

Answers

1.

44.0 g

3.

3.00 × 102 g

5.

0.0336 mol

7.

0.0183 mol

9.

45.1 g

11.

507 g

13.

4.30 × 103 g

15.

163 g

17.

76.7 g

Chapter 38

6.5 Limiting Reagents

Learning Objectives

Identify a limiting reagent from a set of reactants.

Calculate how much product will be produced from the limiting reagent.

Calculate how much reactant(s) remains when the reaction is complete.

One additional assumption we have made about chemical reactions—in addition to the assumption that reactions proceed all the way to completion—is that all the reactants are present in the proper quantities to react to products. This is not always the case.

Consider Figure 6.2 “Making Water”. Here we are taking hydrogen atoms and oxygen atoms (left) to make water molecules (right). However, there are not enough oxygen atoms to use up all the hydrogen atoms. We run out of oxygen atoms and cannot make any more water molecules, so the process stops when we run out of oxygen atoms.

A similar situation exists for many chemical reactions: you usually run out of one reactant before all of the other reactant has reacted. The reactant you run out of is called the limiting reagent; the other reactant or reactants are considered to be in excess. A crucial skill in evaluating the conditions of a chemical process is to determine which reactant is the limiting reagent and which is in excess.

The key to recognizing which reactant is the limiting reagent is based on a mole-mass or mass-mass calculation: whichever reactant gives the lesser amount of product is the limiting reagent. What we need to do is determine an amount of one product (either moles or mass) assuming all of each reactant reacts. Whichever reactant gives the least amount of that particular product is the limiting reagent. It does not matter which product we use, as long as we use the same one each time. It does not matter whether we determine the number of moles or grams of that product; however, we will see shortly that knowing the final mass of product can be useful.

For example, consider this reaction:

4 As(s) + 3 O2(g) → 2 As2O3(s)

Suppose we start a reaction with 50.0 g of As and 50.0 g of O2. Which one is the limiting reagent? We need to perform two mole-mass calculations, each assuming that each reactant reacts completely. Then we compare the amount of the product produced by each and determine which is less.

The calculations are as follows:

Comparing these two answers, it is clear that 0.334 mol of As2O3 is less than 1.04 mol of As2O3, so arsenic is the limiting reagent. If this reaction is performed under these initial conditions, the arsenic will run out before the oxygen runs out. We say that the oxygen is “in excess.”

Identifying the limiting reagent, then, is straightforward. However, there are usually two associated questions: (1) what mass of product (or products) is then actually formed? and (2) what mass of what reactant is left over? The first question is straightforward to answer: simply perform a conversion from the number of moles of product formed to its mass, using its molar mass. For As2O3, the molar mass is 197.84 g/mol; knowing that we will form 0.334 mol of As2O3 under the given conditions, we will get

The second question is somewhat more convoluted to answer. First, we must do a mass-mass calculation relating the limiting reagent (here, As) to the other reagent (O2). Once we determine the mass of O2 that reacted, we subtract that from the original amount to determine the amount left over. According to the mass-mass calculation,

Because we reacted 16.0 g of our original O2, we subtract that from the original amount, 50.0 g, to get the mass of O2 remaining:

50.0 g O2 − 16.0 g O2 reacted = 34.0 g O2 left over

You must remember to perform this final subtraction to determine the amount remaining; a common error is to report the 16.0 g as the amount remaining.

Example 14 A 5.00 g quantity of Rb are combined with 3.44 g of MgCl2 according to this chemical reaction: 2 Rb(s) + MgCl2(s) → Mg(s) + 2 RbCl(s) What mass of Mg is formed, and what mass of what reactant is left over? Solution Because the question asks what mass of magnesium is formed, we can perform two mass-mass calculations and determine which amount is less. The 0.711 g of Mg is the lesser quantity, so the associated reactant—5.00 g of Rb—is the limiting reagent. To determine how much of the other reactant is left, we have to do one more mass-mass calculation to determine what mass of MgCl2 reacted with the 5.00 g of Rb and then subtract the amount reacted from the original amount. Because we started with 3.44 g of MgCl2, we have 3.44 g MgCl2 − 2.78 g MgCl2 reacted = 0.66 g MgCl2 left Test Yourself Given the initial amounts listed, what is the limiting reagent, and what is the mass of the leftover reagent? Answer H2S is the limiting reagent; 1.5 g of MgO are left over.

Key Takeaways

The limiting reagent is that reactant that produces the least amount of product.

Mass-mass calculations can determine how much product is produced and how much of the other reactants remain.

Exercises

The box below shows a group of nitrogen and hydrogen molecules that will react to produce ammonia, NH3. What is the limiting reagent?

The box below shows a group of hydrogen and oxygen molecules that will react to produce water, H2O. What is the limiting reagent?

Given the statement “20.0 g of methane is burned in excess oxygen,” is it obvious which reactant is the limiting reagent?

Given the statement “the metal is heated in the presence of excess hydrogen,” is it obvious which substance is the limiting reagent despite not specifying any quantity of reactant?

Acetylene (C2H2) is formed by reacting 7.08 g of C and 4.92 g of H2.

2 C(s) + H2(g) → C2H2(g)

What is the limiting reagent? How much of the other reactant is in excess?

Ethane (C2H6) is formed by reacting 7.08 g of C and 4.92 g of H2.

2 C(s) + 3 H2(g) → C2H6(g)

What is the limiting reagent? How much of the other reactant is in excess?

Given the initial amounts listed, what is the limiting reagent, and how much of the other reactant is in excess?

Given the initial amounts listed, what is the limiting reagent, and how much of the other reactant is in excess?

To form the precipitate PbCl2, 2.88 g of NaCl and 7.21 g of Pb(NO3)2 are mixed in solution. How much precipitate is formed? How much of which reactant is in excess?

In a neutralization reaction, 18.06 g of KOH are reacted with 13.43 g of HNO3. What mass of H2O is produced, and what mass of which reactant is in excess?

Answers

1.

Nitrogen is the limiting reagent.

3.

Yes; methane is the limiting reagent.

5.

C is the limiting reagent; 4.33 g of H2 are left over.

7.

H2O is the limiting reagent; 25.9 g of P4O6 are left over.

9.

6.06 g of PbCl2 are formed; 0.33 g of NaCl is left over.

Chapter 39

6.6 Yields

Learning Objectives

1. Define and determine theoretical yields, actual yields, and percent yields.

In all the previous calculations we have performed involving balanced chemical equations, we made two assumptions: (1) the reaction goes exactly as written, and (2) the reaction proceeds completely. In reality, such things as side reactions occur that make some chemical reactions rather messy. For example, in the actual combustion of some carbon-containing compounds, such as methane, some CO is produced as well as CO2. However, we will continue to ignore side reactions, unless otherwise noted.

The second assumption, that the reaction proceeds completely, is more troublesome. Many chemical reactions do not proceed to completion as written, for a variety of reasons (some of which we will consider in Chapter 14 “Chemical Equilibrium”). When we calculate an amount of product assuming that all the reactant reacts, we calculate the theoretical yield, an amount that is theoretically produced as calculated using the balanced chemical reaction.

In many cases, however, this is not what really happens. In many cases, less—sometimes much less—of a product is made during the course of a chemical reaction. The amount that is actually produced in a reaction is called the actual yield. By definition, the actual yield is less than or equal to the theoretical yield. If it is not, then an error has been made.

Both theoretical yields and actual yields are expressed in units of moles or grams. It is also common to see something called a percent yield. The percent yield is a comparison between the actual yield and the theoretical yield and is defined as

It does not matter whether the actual and theoretical yields are expressed in moles or grams, as long as they are expressed in the same units. However, the percent yield always has units of percent. Proper percent yields are between 0% and 100%—again, if percent yield is greater than 100%, an error has been made.

Example 13 A worker reacts 30.5 g of Zn with nitric acid and evapourates the remaining water to obtain 65.2 g of Zn(NO3)2. What are the theoretical yield, the actual yield, and the percent yield? Zn(s) + 2 HNO3(aq) → Zn(NO3)2(aq) + H2(g) Solution A mass-mass calculation can be performed to determine the theoretical yield. We need the molar masses of Zn (65.39 g/mol) and Zn(NO3)2 (189.41 g/mol). In three steps, the mass-mass calculation is Thus, the theoretical yield is 88.3 g of Zn(NO3)2. The actual yield is the amount that was actually made, which was 65.2 g of Zn(NO3)2. To calculate the percent yield, we take the actual yield and divide it by the theoretical yield and multiply by 100: The worker achieved almost three-fourths of the possible yield. Test Yourself A synthesis produced 2.05 g of NH3 from 16.5 g of N2. What is the theoretical yield and the percent yield? N2(g) + 3 H2(g) → 2 NH3(g) Answer theoretical yield = 20.1 g; percent yield = 10.2%

Chemistry Is Everywhere: Actual Yields in Drug Synthesis and Purification

Many drugs are the product of several steps of chemical synthesis. Each step typically occurs with less than 100% yield, so the overall percent yield might be very small. The general rule is that the overall percent yield is the product of the percent yields of the individual synthesis steps. For a drug synthesis that has many steps, the overall percent yield can be very tiny, which is one factor in the huge cost of some drugs. For example, if a 10-step synthesis has a percent yield of 90% for each step, the overall yield for the entire synthesis is only 35%. Many scientists work every day trying to improve percent yields of the steps in the synthesis to decrease costs, improve profits, and minimize waste.

Even purifications of complex molecules into drug-quality purity are subject to percent yields. Consider the purification of impure albuterol. Albuterol (C13H21NO2; accompanying figure) is an inhaled drug used to treat asthma, bronchitis, and other obstructive pulmonary diseases. It is synthesized from norepinephrine, a naturally occurring hormone and neurotransmitter. Its initial synthesis makes very impure albuterol that is purified in five chemical steps. The details of the steps do not concern us; only the percent yields do:

Table 6.1 Percent yield of the purification of albuterol

Synthesis	Percent Yield
impure albuterol → intermediate A	percent yield = 70%
intermediate A → intermediate B	percent yield = 100%
intermediate B → intermediate C	percent yield = 40%
intermediate C → intermediate D	percent yield = 72%
intermediate D → purified albuterol	percent yield = 35%
overall percent yield = 70% × 100% × 40% × 72% × 35% = 7.5%

That is, only about one-fourteenth of the original material was turned into the purified drug. This gives you one reason why some drugs are so expensive; a lot of material is lost in making a high-purity pharmaceutical.

Key Takeaways

Theoretical yield is what you calculate the yield will be using the balanced chemical reaction.

Actual yield is what you actually get in a chemical reaction.

Percent yield is a comparison of the actual yield with the theoretical yield.

Exercises

What is the difference between the theoretical yield and the actual yield?

What is the difference between the actual yield and the percent yield?

A worker isolates 2.675 g of SiF4 after reacting 2.339 g of SiO2 with HF. What are the theoretical yield and the actual yield?

SiO2(s) + 4 HF(g) → SiF4(g) + 2 H2O(ℓ)

A worker synthesizes aspirin, C9H8O4, according to this chemical equation. If 12.66 g of C7H6O3 are reacted and 12.03 g of aspirin are isolated, what are the theoretical yield and the actual yield?

C7H6O3 + C4H6O3 → C9H8O4 + HC2H3O2

A chemist decomposes 1.006 g of NaHCO3 and obtains 0.0334 g of Na2CO3. What are the theoretical yield and the actual yield?

2 NaHCO3(s) → Na2CO3(s) + H2O(ℓ) + CO2(g)

A chemist combusts a 3.009 g sample of C5H12 and obtains 3.774 g of H2O. What are the theoretical yield and the actual yield?

C5H12(ℓ) + 8 O2(g) → 5 CO2 + 6 H2O(ℓ)

What is the percent yield in Exercise 3?

What is the percent yield in Exercise 4?

What is the percent yield in Exercise 5?

What is the percent yield in Exercise 6?

Answers

1.

Theoretical yield is what you expect stoichiometrically from a chemical reaction; actual yield is what you actually get from a chemical reaction.

3.

theoretical yield = 4.052 g; actual yield = 2.675 g

5.

theoretical yield = 0.635 g; actual yield = 0.0334 g

7.

66.02%

9.

5.26%

Chapter 40

6.7 End-of-Chapter Material

Additional Exercises

How many molecules of O2 will react with 6.022 × 1023 molecules of H2 to make water? The reaction is 2 H2(g) + O2(g) → 2 H2O(ℓ).

How many molecules of H2 will react with 6.022 × 1023 molecules of N2 to make ammonia? The reaction is N2(g) + 3 H2(g) → 2 NH3(g).

How many moles are present in 6.411 kg of CO2? How many molecules is this?

How many moles are present in 2.998 mg of SCl4? How many molecules is this?

What is the mass in milligrams of 7.22 × 1020 molecules of CO2?

What is the mass in kilograms of 3.408 × 1025 molecules of SiS2?

What is the mass in grams of 1 molecule of H2O?

What is the mass in grams of 1 atom of Al?

What is the volume of 3.44 mol of Ga if the density of Ga is 6.08 g/mL?

What is the volume of 0.662 mol of He if the density of He is 0.1785 g/L?

For the chemical reaction

2 C4H10(g) + 13 O2(g) → 8 CO2(g) + 10 H2O(ℓ)

assume that 13.4 g of C4H10 reacts completely to products. The density of CO2 is 1.96 g/L. What volume in liters of CO2 is produced?

For the chemical reaction

2 GaCl3(s) + 3 H2(g) → 2 Ga(ℓ) + 6 HCl(g)

if 223 g of GaCl3 reacts completely to products and the density of Ga is 6.08 g/mL, what volume in milliliters of Ga is produced?

Calculate the mass of each product when 100.0 g of CuCl react according to the reaction

2 CuCl(aq) → CuCl2(aq) + Cu(s)

What do you notice about the sum of the masses of the products? What concept is being illustrated here?

Calculate the mass of each product when 500.0 g of SnCl2 react according to the reaction

2 SnCl2(aq) → SnCl4(aq) + Sn(s)

What do you notice about the sum of the masses of the products? What concept is being illustrated here?

What mass of CO2 is produced from the combustion of 1 gal of gasoline? The chemical formula of gasoline can be approximated as C8H18. Assume that there are 2,801 g of gasoline per gallon.

What mass of H2O is produced from the combustion of 1 gal of gasoline? The chemical formula of gasoline can be approximated as C8H18. Assume that there are 2,801 g of gasoline per gallon.

A chemical reaction has a theoretical yield of 19.98 g and a percent yield of 88.40%. What is the actual yield?

A chemical reaction has an actual yield of 19.98 g and a percent yield of 88.40%. What is the theoretical yield?

Given the initial amounts listed, what is the limiting reagent, and how much of the other reactants are in excess?

Given the initial amounts listed, what is the limiting reagent, and how much of the other reactants are in excess?

Verify that it does not matter which product you use to predict the limiting reagent by using both products in this combustion reaction to determine the limiting reagent and the amount of the reactant in excess. Initial amounts of each reactant are given.

Just in case you suspect Exercise 21 is rigged, do it for another chemical reaction and verify that it does not matter which product you use to predict the limiting reagent by using both products in this combustion reaction to determine the limiting reagent and the amount of the reactant in excess. Initial amounts of each reactant are given.

Answers

1.

1.2044 × 1024 molecules

3.

145.7 mol; 8.77 × 1025 molecules

5.

52.8 mg

7.

2.99 × 10−23 g

9.

39.4 mL

11.

20.7 L

13.

67.91 g of CuCl2; 32.09 g of Cu. The two masses add to 100.0 g, the initial amount of starting material, demonstrating the law of conservation of matter.

15.

8,632 g

17.

17.66 g

19.

The limiting reagent is NaOH; 21.9 g of P4 and 3.61 g of H2O are left over.

21.

Both products predict that O2 is the limiting reagent; 20.3 g of C3H8 are left over.

PART V

Unit 5 Gases

Chapter 41

Chapter 7. Gases

Introduction to Gases

Perhaps one of the most spectacular chemical reactions involving a gas occurred on May 6, 1937, when the German airship Hindenburg exploded on approach to the Naval Air Station in Lakehurst, New Jersey. The actual cause of the explosion is still unknown, but the entire volume of hydrogen gas used to float the airship, about 200,000 m3, burned in less than a minute. Thirty-six people, including one on the ground, were killed.Hydrogen is the lightest known gas. Any balloon filled with hydrogen gas will float in air if its mass is not too great. This makes hydrogen an obvious choice for flying machines based on balloons—airships, dirigibles, and blimps. However, hydrogen also has one obvious drawback: it burns in air according to the well-known chemical equation.

2 H2(g) + O2(g) → 2 H2O(ℓ)

So although hydrogen is an obvious choice, it is also a dangerous choice.

Helium gas is also lighter than air and has 92% of the lifting power of hydrogen. Why, then, was helium not used in the Hindenburg? In the 1930s, helium was much more expensive. In addition, the best source of helium at the time was the United States, which banned helium exports to pre–World War II Germany. Today all airships use helium, a legacy of the Hindenburg disaster.

Of the three basic phases of matter—solids, liquids, and gases—only one of them has predictable physical properties: gases. In fact, the study of the properties of gases was the beginning of the development of modern chemistry from its alchemical roots. The interesting thing about some of these properties is that they are independent of the identity of the gas. That is, it doesn’t matter if the gas is helium gas, oxygen gas, or sulfur vapours; some of their behaviour is predictable and, as we will find, very similar. In this chapter, we will review some of the common behaviours of gases.

Let us start by reviewing some properties of gases. Gases have no definite shape or volume; they tend to fill whatever container they are in. They can compress and expand, sometimes to a great extent. Gases have extremely low densities, one-thousandth or less the density of a liquid or solid. Combinations of gases tend to mix together spontaneously; that is, they form solutions. Air, for example, is a solution of mostly nitrogen and oxygen. Any understanding of the properties of gases must be able to explain these characteristics.

Chapter 42

7.1 Pressure

Learning Objectives

Define pressure.

Learn the units of pressure and how to convert between them.

The kinetic theory of gases indicates that gas particles are always in motion and are colliding with other particles and the walls of the container holding them. Although collisions with container walls are elastic (i.e., there is no net energy gain or loss because of the collision), a gas particle does exert a force on the wall during the collision. The accumulation of all these forces distributed over the area of the walls of the container causes something we call pressure. Pressure (P) is defined as the force of all the gas particle/wall collisions divided by the area of the wall:

All gases exert pressure; it is one of the fundamental measurable quantities of this phase of matter. Even our atmosphere exerts pressure—in this case, the gas is being “held in” by the earth’s gravity, rather than the gas being in a container. The pressure of the atmosphere is 101,325 Pa.

Pressure has a variety of units. The formal, SI-approved unit of pressure is the pascal (Pa), which is defined as 1 N/m2 (one newton of force over an area of one square meter). However, this is usually too small in magnitude to be useful. A common unit of pressure is the atmosphere (atm), which was originally defined as the average atmospheric pressure at sea level.

However, “average atmospheric pressure at sea level” is difficult to pinpoint because of atmospheric pressure variations. A more reliable and common unit is millimeters of mercury (mmHg), which is the amount of pressure exerted by a column of mercury exactly 1 mm high. An equivalent unit is the torr, which equals 1 mmHg (The torr is named after Evangelista Torricelli, a seventeenth-century Italian scientist who invented the mercury barometer.) With these definitions of pressure, the atmosphere unit is redefined: 1 atm is defined as exactly 760 mmHg, or 760 torr. We thus have the following equivalences:

1 atm = 760 mmHg = 760 torr

We can use these equivalences as with any equivalences—to perform conversions from one unit to another. Relating these to the formal SI unit of pressure, 1 atm = 101,325 Pa.

Example 1 How many atmospheres are there in 595 torr? Solution Using the pressure equivalences, we construct a conversion factor between torr and atmospheres: 1 atm = 760 torr. Thus, Because the numbers in the conversion factor are exact, the number of significant figures in the final answer is determined by the initial value of pressure. Test Yourself How many atmospheres are there in 1,022 torr? Answer 1.345 atm

Example 2 The atmosphere on Mars is largely CO2 at a pressure of 6.01 mmHg. What is this pressure in atmospheres? Solution Use the pressure equivalences to construct the proper conversion factor between millimeters of mercury and atmospheres. At the end, we expressed the answer in scientific notation. Test Yourself Atmospheric pressure is low in the eye of a hurricane. In a 1979 hurricane in the Pacific Ocean, a pressure of 0.859 atm was reported inside the eye. What is this pressure in torr? Answer 652 torr

Key Takeaways

Pressure is a force exerted over an area.

Pressure has several common units that can be converted.

Exercises

Define pressure. What causes it?

Define and relate three units of pressure.

If a force of 16.7 N is pressed against an area of 2.44 m2, what is the pressure in pascals?

If a force of 2,546 N is pressed against an area of 0.0332 m2, what is the pressure in pascals?

Explain why the original definition of atmosphere did not work well.

What units of pressure are equal to each other?

How many atmospheres are in 889 mmHg?

How many atmospheres are in 223 torr?

How many torr are in 2.443 atm?

How many millimeters of mercury are in 0.334 atm?

How many millimeters of mercury are in 334 torr?

How many torr are in 0.777 mmHg?

How many pascals are in 1 torr?

A pressure of 0.887 atm equals how many pascals?

Answers

1.

Pressure is force per unit area. It is caused by gas particles hitting the walls of their container.

3.

6.84 Pa

5.

Because the atmospheric pressure at sea level is variable, it is not a consistent unit of pressure.

7.

1.17 atm

9.

1,857 torr

11.

334 mmHg

13.

133 Pa

Chapter 43

7.2 Gas Laws

Learning Objectives

Learn what is meant by the term gas laws.

Learn and apply Boyle’s law.

Learn and apply Charles’s law.

When seventeenth-century scientists began studying the physical properties of gases, they noticed simple relationships between some of the measurable properties of gases. Take pressure (P) and volume (V), for example. Scientists noted that for a given amount of a gas (usually expressed in units of moles [n]), if the temperature (T) of the gas is kept constant, pressure and volume are related: as one increases, the other decreases. As one decreases, the other increases. We say that pressure and volume are inversely related.

There is more to it, however: pressure and volume of a given amount of gas at a constant temperature are numerically related. If you take the pressure value and multiply it by the volume value, the product is a constant for a given amount of gas at a constant temperature:

P × V = constant at constant n and T

If either volume or pressure changes while the amount and temperature stay the same, then the other property must change so that the product of the two properties still equals that same constant. That is, if the original conditions are labelled P1 and V1 and the new conditions are labelled P2 and V2, we have

P1V1 = constant = P2V2

where the properties are assumed to be multiplied together. Leaving out the middle part, we have simply

P1V1 = P2V2 at constant n and T

This equation is an example of a gas law. A gas law is a simple mathematical formula that allows you to model, or predict, the behaviour of a gas. This particular gas law is called Boyle’s law, after the English scientist Robert Boyle, who first announced it in 1662. Figure 7.1 Boyle’s Law shows two representations of what Boyle’s law describes.

Figure 7.1 Boyle’s Law. A piston having a certain pressure and volume (left piston) will have half the volume when its pressure is twice as much (right piston). One can also plot

versus

for a given amount of gas at a certain temperature; such a plot will look like the graph on the right.

Boyle’s law is an example of a second type of mathematical problem we see in chemistry—one based on a mathematical formula. Tactics for working with mathematical formulas are different from tactics for working with conversion factors. First, most of the questions you will have to answer using formulas are word-type questions, so the first step is to identify what quantities are known and assign them to variables. Second, in most formulas, some mathematical rearrangements (i.e., algebra) must be performed to solve for an unknown variable. The rule is that to find the value of the unknown variable, you must mathematically isolate the unknown variable by itself and in the numerator of one side of the equation. Finally, units must be consistent. For example, in Boyle’s law there are two pressure variables, and they must have the same unit. There are also two volume variables; they also must have the same unit. In most cases, it won’t matter what the unit is, but the unit must be the same on both sides of the equation.

Example 3 A sample of gas has an initial pressure of 2.44 atm and an initial volume of 4.01 L. Its pressure changes to 1.93 atm. What is the new volume if temperature and amount are kept constant? Solution First, determine what quantities we are given. We are given an initial pressure and an initial volume, so let these values be P1 and V1: P1 = 2.44 atm and V1 = 4.01 L We are given another quantity, final pressure of 1.93 atm, but not a final volume. This final volume is the variable we will solve for. P2 = 1.93 atm and V2 = ? L Substituting these values into Boyle’s law, we get (2.44 atm)(4.01 L) = (1.93 atm)V2 To solve for the unknown variable, we isolate it by dividing both sides of the equation by 1.93 atm—both the number and the unit: Note that, on the left side of the equation, the unit atm is in the numerator and the denominator of the fraction. They cancel algebraically, just as a number would. On the right side, the unit atm and the number 1.93 are in the numerator and the denominator, so the entire quantity cancels: What we have left is Now we simply multiply and divide the numbers together and combine the answer with the L unit, which is a unit of volume. Doing so, we get V2 = 5.07 L Does this answer make sense? We know that pressure and volume are inversely related; as one decreases, the other increases. Pressure is decreasing (from 2.44 atm to 1.93 atm), so volume should be increasing to compensate, and it is (from 4.01 L to 5.07 L). So the answer makes sense based on Boyle’s law. Test Yourself If P1 = 334 torr, V1 = 37.8 mL, and P2 = 102 torr, what is V2? Answer 124 mL

As mentioned, you can use any units for pressure or volume, but both pressures must be expressed in the same units, and both volumes must be expressed in the same units.

Example 4 A sample of gas has an initial pressure of 722 torr and an initial volume of 88.8 mL. Its volume changes to 0.663 L. What is the new pressure? Solution We can still use Boyle’s law to answer this, but now the two volume quantities have different units. It does not matter which unit we change, as long as we perform the conversion correctly. Let us change the 0.663 L to milliliters: Now that both volume quantities have the same units, we can substitute into Boyle’s law: The mL units cancel, and we multiply and divide the numbers to get P2 = 96.7 torr The volume is increasing, and the pressure is decreasing, which is as expected for Boyle’s law. Test Yourself If V1 = 456 mL, P1 = 308 torr, and P2 = 1.55 atm, what is V2? Answer 119 mL

There are other measurable characteristics of a gas. One of them is temperature (T). One could vary the temperature of a gas sample and note what effect it has on the other properties of the gas. Early scientists did just this, discovering that if the amount of a gas and its pressure are kept constant, then changing the temperature changes the volume (V). As temperature increases, volume increases; as temperature decreases, volume decreases. We say that these two characteristics are directly related.

A mathematical relationship between V and T should be possible except for one question: What temperature scale should we use? We know from Chapter 2 “Measurements” that science uses several possible temperature scales. Experiments show that the volume of a gas is related to its absolute temperature in Kelvin, not its temperature in degrees Celsius. If the temperature of a gas is expressed in kelvins, then experiments show that the ratio of volume to temperature is a constant:

We can modify this equation as we modified Boyle’s law: the initial conditions V1 and T1 have a certain value, and the value must be the same when the conditions of the gas are changed to some new conditions V2 and T2, as long as pressure and the amount of the gas remain constant. Thus, we have another gas law:

This gas law is commonly referred to as Charles’s law, after the French scientist Jacques Charles, who performed experiments on gases in the 1780s. The tactics for using this mathematical formula are similar to those for Boyle’s law. To determine an unknown quantity, use algebra to isolate the unknown variable by itself and in the numerator; the units of similar variables must be the same. But we add one more tactic: all temperatures must be expressed in the absolute temperature scale (Kelvin). As a reminder, we review the conversion between the absolute temperature scale and the Celsius temperature scale:

K = °C + 273

where K represents the temperature in kelvins, and °C represents the temperature in degrees Celsius.

Figure 6.1 “Charles’s Law” shows two representations of how Charles’s law works.

Figure 7.2 Charles’s Law. A piston having a certain volume and temperature (left piston) will have twice the volume when its temperature is twice as much (right piston). One can also plot

versus

for a given amount of gas at a certain pressure; such a plot will look like the graph on the right.

Example 5 A sample of gas has an initial volume of 34.8 mL and an initial temperature of 315 K. What is the new volume if the temperature is increased to 559 K? Assume constant pressure and amount for the gas. Solution First, we assign the given values to their variables. The initial volume is V1, so V1 = 34.8 mL, and the initial temperature is T1, so T1 = 315 K. The temperature is increased to 559 K, so the final temperature T2 = 559 K. We note that the temperatures are already given in kelvins, so we do not need to convert the temperatures. Substituting into the expression for Charles’s law yields We solve for V2 by algebraically isolating the V2 variable on one side of the equation. We do this by multiplying both sides of the equation by 559 K (number and unit). When we do this, the temperature unit cancels on the left side, while the entire 559 K cancels on the right side: The expression simplifies to By multiplying and dividing the numbers, we see that the only remaining unit is mL, so our final answer is V2 = 61.8 mL Does this answer make sense? We know that as temperature increases, volume increases. Here, the temperature is increasing from 315 K to 559 K, so the volume should also increase, which it does. Test Yourself If V1 = 3.77 L and T1 = 255 K, what is V2 if T2 = 123 K? Answer 1.82 L

It is more mathematically complicated if a final temperature must be calculated because the T variable is in the denominator of Charles’s law. There are several mathematical ways to work this, but perhaps the simplest way is to take the reciprocal of Charles’s law. That is, rather than write it as

write the equation as

It is still an equality and a correct form of Charles’s law, but now the temperature variable is in the numerator, and the algebra required to predict a final temperature is simpler.

Example 6 A sample of a gas has an initial volume of 34.8 L and an initial temperature of −67°C. What must be the temperature of the gas for its volume to be 25.0 L? Solution Here, we are looking for a final temperature, so we will use the reciprocal form of Charles’s law. However, the initial temperature is given in degrees Celsius, not kelvins. We must convert the initial temperature to kelvins: −67°C + 273 = 206 K In using the gas law, we must use T1 = 206 K as the temperature. Substituting into the reciprocal form of Charles’s law, we get Bringing the 25.0 L quantity over to the other side of the equation, we get The L units cancel, so our final answer is T2 = 148 K This is also equal to −125°C. As temperature decreases, volume decreases, which it does in this example. Test Yourself If V1 = 623 mL, T1 = 255°C, and V2 = 277 mL, what is T2? Answer 235 K, or −38°C

Key Takeaways

The behaviour of gases can be modelled with gas laws.

Boyle’s law relates a gas’s pressure and volume at constant temperature and amount.

Charles’s law relates a gas’s volume and temperature at constant pressure and amount.

In gas laws, temperatures must always be expressed in kelvins.

Exercises

Define gas law. What restrictions are there on the units that can be used for the physical properties?

What unit of temperature must be used for gas laws?

Boyle’s law relates the _____________ of a gas inversely with the ___________ of that gas.

Charles’s law relates the _____________ of a gas directly with the ___________ of that gas.

What properties must be held constant when applying Boyle’s law?

What properties must be held constant when applying Charles’s law?

A gas has an initial pressure of 1.445 atm and an initial volume of 1.009 L. What is its new pressure if volume is changed to 0.556 L? Assume temperature and amount are held constant.

A gas has an initial pressure of 633 torr and an initial volume of 87.3 mL. What is its new pressure if volume is changed to 45.0 mL? Assume temperature and amount are held constant.

A gas has an initial pressure of 4.33 atm and an initial volume of 5.88 L. What is its new volume if pressure is changed to 0.506 atm? Assume temperature and amount are held constant.

A gas has an initial pressure of 87.0 torr and an initial volume of 28.5 mL. What is its new volume if pressure is changed to 206 torr? Assume temperature and amount are held constant.

A gas has an initial volume of 638 mL and an initial pressure of 779 torr. What is its final volume in liters if its pressure is changed to 0.335 atm? Assume temperature and amount are held constant.

A gas has an initial volume of 0.966 L and an initial pressure of 3.07 atm. What is its final pressure in torr if its volume is changed to 3,450 mL? Assume temperature and amount are held constant.

A gas has an initial volume of 67.5 mL and an initial temperature of 315 K. What is its new volume if temperature is changed to 244 K? Assume pressure and amount are held constant.

A gas has an initial volume of 2.033 L and an initial temperature of 89.3 K. What is its volume if temperature is changed to 184 K? Assume pressure and amount are held constant.

A gas has an initial volume of 655 mL and an initial temperature of 295 K. What is its new temperature if volume is changed to 577 mL? Assume pressure and amount are held constant.

A gas has an initial volume of 14.98 L and an initial temperature of 238 K. What is its new temperature if volume is changed to 12.33 L? Assume pressure and amount are held constant.

A gas has an initial volume of 685 mL and an initial temperature of 29°C. What is its new temperature if volume is changed to 1.006 L? Assume pressure and amount are held constant.

A gas has an initial volume of 3.08 L and an initial temperature of −73°C. What is its new volume if its temperature is changed to 104°C? Assume pressure and amount are held constant.

Answers

1. A gas law is a simple mathematical formula that allows one to predict the physical properties of a gas. The units of changing properties (volume, pressure, etc.) must be the same.

3. pressure; volume

5. amount of gas and temperature

7. 2.62 atm

9. 50.3 L

11. 1.95 L

13. 52.3 mL

15. 260 K

17. 444 K, or 171°C

Chapter 44

7.3 Other Gas Laws

Learning Objectives

Review other simple gas laws.

Learn and apply the combined gas law.

You may notice in Boyle’s law and Charles’s law that we actually refer to four physical properties of a gas: pressure (P), volume (V), temperature (T), and amount (in moles, n). We do this because these are the only four independent physical properties of a gas. There are other physical properties, but they are all related to one (or more) of these four properties.

Boyle’s law is written in terms of two of these properties, with the other two being held constant. Charles’s law is written in terms of two different properties, with the other two being held constant. It may not be surprising to learn that there are other gas laws that relate other pairs of properties—as long as the other two are held constant. Here we will mention a few.

Gay-Lussac’s law relates pressure with absolute temperature. In terms of two sets of data, Gay-Lussac’s law is

Note that it has a structure very similar to that of Charles’s law, only with different variables—pressure instead of volume. Avogadro’s law introduces the last variable for amount. The original statement of Avogadro’s law states that equal volumes of different gases at the same temperature and pressure contain the same number of particles of gas. Because the number of particles is related to the number of moles (1 mol = 6.022 × 1023 particles), Avogadro’s law essentially states that equal volumes of different gases at the same temperature and pressure contain the same amount (moles, particles) of gas. Put mathematically into a gas law, Avogadro’s law is

(First announced in 1811, it was Avogadro’s proposal that volume is related to the number of particles that eventually led to naming the number of things in a mole as Avogadro’s number.) Avogadro’s law is useful because for the first time we are seeing amount, in terms of the number of moles, as a variable in a gas law.

Example 7 A 2.45 L volume of gas contains 4.5 × 1021 gas particles. How many gas particles are there in 3.87 L if the gas is at constant pressure and temperature? Solution We can set up Avogadro’s law as follows: We algebraically rearrange to solve for n2: The L units cancel, so we solve for n2: n2 = 7.1 × 1021 particles Test Yourself A 12.8 L volume of gas contains 3.00 × 1020 gas particles. At constant temperature and pressure, what volume do 8.22 × 1018 gas particles fill? Answer 0.351 L

The variable n in Avogadro’s law can also stand for the number of moles of gas in addition to the number of particles.

One thing we notice about all the gas laws is that, collectively, volume and pressure are always in the numerator, and temperature is always in the denominator. This suggests that we can propose a gas law that combines pressure, volume, and temperature. This gas law is known as the combined gas law, and its mathematical form is

This allows us to follow changes in all three major properties of a gas. Again, the usual warnings apply about how to solve for an unknown algebraically (isolate it on one side of the equation in the numerator), units (they must be the same for the two similar variables of each type), and units of temperature (must be in kelvins).

Example 8 A sample of gas at an initial volume of 8.33 L, an initial pressure of 1.82 atm, and an initial temperature of 286 K simultaneously changes its temperature to 355 K and its volume to 5.72 L. What is the final pressure of the gas? Solution We can use the combined gas law directly; all the units are consistent with each other, and the temperatures are given in Kelvin. Substituting, We rearrange this to isolate the P2 variable all by itself. When we do so, certain units cancel: Multiplying and dividing all the numbers, we get P2 = 3.29 atm Ultimately, the pressure increased, which would have been difficult to predict because two properties of the gas were changing. Test Yourself If P1 = 662 torr, V1 = 46.7 mL, T1 = 266 K, P2 = 409 torr, and T2 = 371 K, what is V2? Answer 105 mL

As with other gas laws, if you need to determine the value of a variable in the denominator of the combined gas law, you can either cross-multiply all the terms or just take the reciprocal of the combined gas law. Remember, the variable you are solving for must be in the numerator and all by itself on one side of the equation.

Key Takeaways

There are other gas laws that relate any two physical properties of a gas.

The combined gas law relates pressure, volume, and temperature of a gas.

Exercises

State Gay-Lussac’s law.

State Avogadro’s law.

Use Gay-Lussac’s law to determine the final pressure of a gas whose initial pressure is 602 torr, initial temperature is 356 K, and final temperature is 277 K. Assume volume and amount are held constant.

Use Gay-Lussac’s law to determine the final temperature of a gas whose initial pressure is 1.88 atm, initial temperature is 76.3 K, and final pressure is 6.29 atm. Assume volume and amount are held constant.

If 3.45 × 1022 atoms of Ar have a volume of 1.55 L at a certain temperature and pressure, what volume do 6.00 × 1023 atoms of Ar have at the same temperature and pressure?

If 5.55 × 1022 atoms of He occupy a volume of 2.06 L at 0°C at 1.00 atm pressure, what volume do 2.08 × 1023 atoms of He occupy under the same conditions?

Use Avogadro’s law to determine the final volume of a gas whose initial volume is 6.72 L, initial amount is 3.88 mol, and final amount is 6.10 mol. Assume pressure and temperature are held constant.

Use Avogadro’s law to determine the final amount of a gas whose initial volume is 885 mL, initial amount is 0.552 mol, and final volume is 1,477 mL. Assume pressure and temperature are held constant.

Use the combined gas law to complete this table. Assume that the amount remains constant in all cases.

V1 =	P1 =	T1 =	V2 =	P2 =	T2 =
56.9 mL	334 torr	266 K	722 torr	334 K
0.976 L	2.33 atm	443 K	1.223 L	355 K
3.66 L	889 torr	23°C	2.19 L	739 torr

Use the combined gas law to complete this table. Assume that the amount remains constant in all cases.

V1 =	P1 =	T1 =	V2 =	P2 =	T2 =
56.7 mL	1.07 atm	−34°C	998 torr	375 K
3.49 L	338 torr	45°C	1,236 mL	392 K
2.09 mL	776 torr	45°C	0.461 mL	0.668 atm

A gas starts at the conditions 78.9 mL, 3.008 atm, and 56°C. Its conditions change to 35.6 mL and 2.55 atm. What is its final temperature?

The initial conditions of a sample of gas are 319 K, 3.087 L, and 591 torr. What is its final pressure if volume is changed to 2.222 L and temperature is changed to 299 K?

A gas starts with initial pressure of 7.11 atm, initial temperature of 66°C, and initial volume of 90.7 mL. If its conditions change to 33°C and 14.33 atm, what is its final volume?

A sample of gas doubles its pressure and doubles its absolute temperature. By what amount does the volume change?

Answers

1.

The pressure of a gas is proportional to its absolute temperature.

3.

468 torr

5.

27.0 L

7.

10.6 L

9.

V1 =	P1 =	T1 =	V2 =	P2 =	T2 =
56.9 mL	334 torr	266 K	33.1 mL	722 torr	334 K
0.976 L	2.33 atm	443 K	1.223 L	1.49 atm	355 K
3.66 L	889 torr	23°C	2.19 L	739 torr	147 K, or −126°C

11.

126 K, or −147°C

13.

40.6 mL

Chapter 45

7.4 The Ideal Gas Law and Some Applications

Learning Objectives

Learn the ideal gas law.

Apply the ideal gas law to any set of conditions of a gas.

Apply the ideal gas law to molar volumes, density, and stoichiometry problems.

So far, the gas laws we have considered have all required that the gas change its conditions; then we predict a resulting change in one of its properties. Are there any gas laws that relate the physical properties of a gas at any given time?

Consider a further extension of the combined gas law to include n. By analogy to Avogadro’s law, n is positioned in the denominator of the fraction, opposite the volume. So

Because pressure, volume, temperature, and amount are the only four independent physical properties of a gas, the constant in the above equation is truly a constant; indeed, because we do not need to specify the identity of a gas to apply the gas laws, this constant is the same for all gases. We define this constant with the symbol R, so the previous equation is written as

which is usually rearranged as

PV = nRT

This equation is called the ideal gas law. It relates the four independent properties of a gas at any time. The constant R is called the ideal gas law constant. Its value depends on the units used to express pressure and volume. Table 7.1 “Values of the Ideal Gas Law Constant R” lists the numerical values of R.

Table 7.1 Values of the Ideal Gas Law Constant R

Numerical Value	Units
0.08205	L·atm/mol·K
62.36	L·torr/mol·K = L·mmHg/mol·K
8.314	J/mol·K

The ideal gas law is used like any other gas law, with attention paid to the units and making sure that temperature is expressed in kelvins. However, the ideal gas law does not require a change in the conditions of a gas sample. The ideal gas law implies that if you know any three of the physical properties of a gas, you can calculate the fourth property.

Example 9 A 4.22 mol sample of Ar has a pressure of 1.21 atm and a temperature of 34°C. What is its volume? Solution The first step is to convert temperature to kelvins: 34 + 273 = 307 K Now we can substitute the conditions into the ideal gas law: The atm unit is in the numerator of both sides, so it cancels. On the right side of the equation, the mol and K units appear in the numerator and the denominator, so they cancel as well. The only unit remaining is L, which is the unit of volume we are looking for. We isolate the volume variable by dividing both sides of the equation by 1.21: Then solving for volume, we get V = 87.9 L Test Yourself A 0.0997 mol sample of O2 has a pressure of 0.692 atm and a temperature of 333 K. What is its volume? Answer 3.94 L

Example 10 At a given temperature, 0.00332 g of Hg in the gas phase has a pressure of 0.00120 mmHg and a volume of 435 L. What is its temperature? Solution We are not given the number of moles of Hg directly, but we are given a mass. We can use the molar mass of Hg to convert to the number of moles. Pressure is given in units of millimeters of mercury. We can either convert this to atmospheres or use the value of the ideal gas constant that includes the mmHg unit. We will take the second option. Substituting into the ideal gas law, The mmHg, L, and mol units cancel, leaving the K unit, the unit of temperature. Isolating T all by itself on one side, we get Then solving for K, we get T = 507 K Test Yourself For a 0.00554 mol sample of H2, P = 23.44 torr and T = 557 K. What is its volume? Answer 8.21 L

The ideal gas law can also be used in stoichiometry problems.

Example 11 What volume of H2 is produced at 299 K and 1.07 atm when 55.8 g of Zn metal react with excess HCl? Zn(s) + 2 HCl(aq) → ZnCl2(aq) + H2(g) Solution Here we have a stoichiometry problem where we need to find the number of moles of H2 produced. Then we can use the ideal gas law, with the given temperature and pressure, to determine the volume of gas produced. First, the number of moles of H2 is calculated: Now that we know the number of moles of gas, we can use the ideal gas law to determine the volume, given the other conditions: All the units cancel except for L, for volume, which means V = 19.6 L Test Yourself What pressure of HCl is generated if 3.44 g of Cl2 are reacted in 4.55 L at 455 K? H2(g) + Cl2(g) → 2HCl(g) Answer 0.796 atm

It should be obvious by now that some physical properties of gases depend strongly on the conditions. What we need is a set of standard conditions so that properties of gases can be properly compared to each other. Standard temperature and pressure (STP) is defined as exactly 100 kPa of pressure (0.986 atm) and 273 K (0°C). For simplicity, we will use 1 atm as standard pressure. Defining STP allows us to compare more directly the properties of gases that differ from each other.

One property shared among gases is a molar volume. The molar volume is the volume of 1 mol of a gas. At STP, the molar volume of a gas can be easily determined by using the ideal gas law:

All the units cancel except for L, the unit of volume. So

V = 22.4 L

Note that we have not specified the identity of the gas; we have specified only that the pressure is 1 atm and the temperature is 273 K. This makes for a very useful approximation: any gas at STP has a volume of 22.4 L per mole of gas; that is, the molar volume at STP is 22.4 L/mol (Figure 7.3 “Molar Volume”). This molar volume makes a useful conversion factor in stoichiometry problems if the conditions are at STP. If the conditions are not at STP, a molar volume of 22.4 L/mol is not applicable. However, if the conditions are not at STP, the combined gas law can be used to calculate the volume of the gas at STP; then the 22.4 L/mol molar volume can be used.

Example 12 How many moles of Ar are present in 38.7 L at STP? Solution We can use the molar volume, 22.4 L/mol, as a conversion factor, but we need to reverse the fraction so that the L units cancel and mol units are introduced. It is a one-step conversion: Test Yourself What volume does 4.87 mol of Kr have at STP? Answer 109 L

Example 13 What volume of H2 is produced at STP when 55.8 g of Zn metal react with excess HCl? Zn(s) + 2 HCl(aq) → ZnCl2(aq) + H2(g) Solution This is a stoichiometry problem with a twist: we need to use the molar volume of a gas at STP to determine the final answer. The first part of the calculation is the same as in a previous example: Now we can use the molar volume, 22.4 L/mol, because the gas is at STP: Alternatively, we could have applied the molar volume as a third conversion factor in the original stoichiometry calculation. Test Yourself What volume of HCl is generated if 3.44 g of Cl2 are reacted at STP? H2(g) + Cl2(g) → 2 HCl(g) Answer 2.17 L

The ideal gas law can also be used to determine the densities of gases. Recall that density is defined as the mass of a substance divided by its volume:

Assume that you have exactly 1 mol of a gas. If you know the identity of the gas, you can determine the molar mass of the substance. Using the ideal gas law, you can also determine the volume of that mole of gas, using whatever the temperature and pressure conditions are. Then you can calculate the density of the gas by using

Example 14 What is the density of N2 at 25°C and 0.955 atm? Solution First, we must convert the temperature into kelvins: 25 + 273 = 298 K If we assume exactly 1 mol of N2, then we know its mass: 28.0 g. Using the ideal gas law, we can calculate the volume: All the units cancel except for L, the unit of volume. So V = 25.6 L Knowing the molar mass and the molar volume, we can determine the density of N2 under these conditions: Test Yourself What is the density of CO2 at a pressure of 0.0079 atm and 227 K? (These are the approximate atmospheric conditions on Mars.) Answer 0.019 g/L

Chemistry Is Everywhere: Breathing Breathing (more properly called respiration) is the process by which we draw air into our lungs so that our bodies can take up oxygen from the air. Let us apply the gas laws to breathing. Start by considering pressure. We draw air into our lungs because the diaphragm, a muscle underneath the lungs, moves down to reduce pressure in the lungs, causing external air to rush in to fill the lower-pressure volume. We expel air by the diaphragm pushing against the lungs, increasing pressure inside the lungs and forcing the high-pressure air out. What are the pressure changes involved? A quarter of an atmosphere? A tenth of an atmosphere? Actually, under normal conditions, a pressure difference of only 1 or 2 torr makes us breathe in and out. Figure 7.4 Breathing Mechanics. Breathing involves pressure differences between the inside of the lungs and the air outside. The pressure differences are only a few torr. A normal breath is about 0.50 L. If room temperature is about 22°C, then the air has a temperature of about 295 K. With normal pressure being 1.0 atm, how many moles of air do we take in for every breath? The ideal gas law gives us an answer: Solving for the number of moles, we get n = 0.021 mol air This ends up being about 0.6 g of air per breath—not much but enough to keep us alive.

Key Takeaways

The ideal gas law relates the four independent physical properties of a gas at any time.

The ideal gas law can be used in stoichiometry problems in which chemical reactions involve gases.

Standard temperature and pressure (STP) are a useful set of benchmark conditions to compare other properties of gases.

At STP, gases have a volume of 22.4 L per mole.

The ideal gas law can be used to determine densities of gases.

Exercises

What is the ideal gas law? What is the significance of R?

Why does R have different numerical values (see Table 6.1 “Values of the Ideal Gas Law Constant R“)?

A sample of gas has a volume of 3.91 L, a temperature of 305 K, and a pressure of 2.09 atm. How many moles of gas are present?

A 3.88 mol sample of gas has a temperature of 28°C and a pressure of 885 torr. What is its volume?

A 0.0555 mol sample of Kr has a temperature of 188°C and a volume of 0.577 L. What pressure does it have?

If 1.000 mol of gas has a volume of 5.00 L and a pressure of 5.00 atm, what is its temperature?

A sample of 7.55 g of He has a volume of 5,520 mL and a temperature of 123°C. What is its pressure in torr?

A sample of 87.4 g of Cl2 has a temperature of −22°C and a pressure of 993 torr. What is its volume in milliliters?

A sample of Ne has a pressure of 0.772 atm and a volume of 18.95 L. If its temperature is 295 K, what mass is present in the sample?

A mercury lamp contains 0.0055 g of Hg vapor in a volume of 15.0 mL. If the operating temperature is 2,800 K, what is the pressure of the mercury vapor?

Oxygen is a product of the decomposition of mercury(II) oxide:

2 HgO(s) → 2 Hg(ℓ) + O2(g)

What volume of O2 is formed from the decomposition of 3.009 g of HgO if the gas has a pressure of 744 torr and a temperature of 122°C?

Lithium oxide is used to absorb carbon dioxide:

Li2O(s) + CO2(g) → Li2CO3(s)

What volume of CO2 can 6.77 g of Li2O absorb if the CO2 pressure is 3.5 × 10−4 atm and the temperature is 295 K?

What is the volume of 17.88 mol of Ar at STP?

How many moles are present in 334 L of H2 at STP?

How many liters of CO2 at STP are produced from 100.0 g of C8H18, the approximate formula of gasoline?

2 C8H18(ℓ) + 25 O2(g) → 16 CO2(g) + 18 H2O(ℓ)

How many liters of O2 at STP are required to burn 3.77 g of butane from a disposable lighter?

2 C4H10(g) + 13 O2(g) → 8 CO2(g) + 10 H2O(ℓ)

What is the density of each gas at STP?

a) He

b) Ne

c) Ar

d) Kr

18. What is the density of each gas at STP?

a) H2

b) O2

c) N2

19. What is the density of SF6 at 335 K and 788 torr?

20. What is the density of He at −200°C and 33.9 torr?

Answers

1. The ideal gas law is PV = nRT. R is the ideal gas law constant, which relates the other four variables.

3. 0.327 mol

5. 3.64 atm

7. 8,440 torr

9. 12.2 g

11. 0.230 L

13. 401 L

15. 157 L

17.

a) 0.179 g/L
b) 0.901 g/L
c) 1.78 g/L
d) 3.74 g/L

19. 5.51 g/L

Chapter 46

7.5 Gas Mixtures

Learning Objective

Learn Dalton’s law of partial pressures.

One of the properties of gases is that they mix with each other. When they do so, they become a solution—a homogeneous mixture. Some of the properties of gas mixtures are easy to determine if we know the composition of the gases in the mix.

In gas mixtures, each component in the gas phase can be treated separately. Each component of the mixture shares the same temperature and volume. (Remember that gases expand to fill the volume of their container; gases in a mixture do that as well.) However, each gas has its own pressure. The partial pressure of a gas, Pi, is the pressure that an individual gas in a mixture has. Partial pressures are expressed in torr, millimeters of mercury, or atmospheres like any other gas pressure; however, we use the term pressure when talking about pure gases and the term partial pressure when we are talking about the individual gas components in a mixture.

Dalton’s law of partial pressures states that the total pressure of a gas mixture, Ptot, is equal to the sum of the partial pressures of the components, Pi:

Although this may seem to be a trivial law, it reinforces the idea that gases behave independently of each other.

Example 15 A mixture of H2 at 2.33 atm and N2 at 0.77 atm is in a container. What is the total pressure in the container? Solution Dalton’s law of partial pressures states that the total pressure is equal to the sum of the partial pressures. We simply add the two pressures together: Ptot = 2.33 atm + 0.77 atm = 3.10 atm Test Yourself Air can be thought of as a mixture of N2 and O2. In 760 torr of air, the partial pressure of N2 is 608 torr. What is the partial pressure of O2? Answer 152 torr

Example 16 A 2.00 L container with 2.50 atm of H2 is connected to a 5.00 L container with 1.90 atm of O2 inside. The containers are opened, and the gases mix. What is the final pressure inside the containers? Solution Because gases act independently of each other, we can determine the resulting final pressures using Boyle’s law and then add the two resulting pressures together to get the final pressure. The total final volume is 2.00 L + 5.00 L = 7.00 L. First, we use Boyle’s law to determine the final pressure of H2: (2.50 atm)(2.00 L) = P2(7.00 L) Solving for P2, we get P2 = 0.714 atm = partial pressure of H2 Now we do that same thing for the O2: (1.90 atm)(5.00 L) = P2(7.00 L)
P2 = 1.36 atm = partial pressure of O2 The total pressure is the sum of the two resulting partial pressures: Ptot = 0.714 atm + 1.36 atm = 2.07 atm Test Yourself If 0.75 atm of He in a 2.00 L container is connected to a 3.00 L container with 0.35 atm of Ne and the connection between the containers is opened, what is the resulting total pressure? Answer 0.51 atm

One of the reasons we have to deal with Dalton’s law of partial pressures is that gases are frequently collected by bubbling through water. As we will see in Chapter 11 “Solids and Liquids,” liquids are constantly evapourating into a vapour until the vapour achieves a partial pressure characteristic of the substance and the temperature. This partial pressure is called a vapour pressure. Table 7.2 “Vapor Pressure of Water versus Temperature” lists the vapour pressures of H2O versus temperature. Note that if a substance is normally a gas under a given set of conditions, the term partial pressure is used; the term vapour pressure is reserved for the partial pressure of a vapour when the liquid is the normal phase under a given set of conditions.

Table 7.2 Vapor Pressure of Water versus Temperature

Temperature (°C)	Vapor Pressure (torr)	Temperature (°C)	Vapor Pressure (torr)
5	6.54	30	31.84
10	9.21	35	42.20
15	12.79	40	55.36
20	17.54	50	92.59
21	18.66	60	149.5
22	19.84	70	233.8
23	21.08	80	355.3
24	22.39	90	525.9
25	23.77	100	760.0

Any time a gas is collected over water, the total pressure is equal to the partial pressure of the gas plus the vapour pressure of water. This means that the amount of gas collected will be less than the total pressure suggests.

Example 17 Hydrogen gas is generated by the reaction of nitric acid and elemental iron. The gas is collected in an inverted 2.00 L container immersed in a pool of water at 22°C. At the end of the collection, the partial pressure inside the container is 733 torr. How many moles of H2 gas were generated? Solution We need to take into account that the total pressure includes the vapour pressure of water. According to Table 7.2 “Vapor Pressure of Water versus Temperature,” the vapour pressure of water at 22°C is 19.84 torr. According to Dalton’s law of partial pressures, the total pressure equals the sum of the pressures of the individual gases, so 733 torr = PH2 + PH2O = PH2 + 19.84 torr We solve by subtracting: PH2 = 713 torr Now we can use the ideal gas law to determine the number of moles (remembering to convert the temperature to kelvins, making it 295 K): All the units cancel except for mol, which is what we are looking for. So n = 0.0775 mol H2 collected Test Yourself CO2, generated by the decomposition of CaCO3, is collected in a 3.50 L container over water. If the temperature is 50°C and the total pressure inside the container is 833 torr, how many moles of CO2 were generated? Answer 0.129 mol

Food and Drink App: Carbonated Beverages

Carbonated beverages—sodas, beer, sparkling wines—have one thing in common: they have CO2 gas dissolved in them in such sufficient quantities that it affects the drinking experience. Most people find the drinking experience pleasant—indeed, in the United States alone, over 1.5 × 109 gal of soda are consumed each year, which is almost 50 gal per person! This figure does not include other types of carbonated beverages, so the total consumption is probably significantly higher.

All carbonated beverages are made in one of two ways. First, the flat beverage is subjected to a high pressure of CO2 gas, which forces the gas into solution. The carbonated beverage is then packaged in a tightly sealed package (usually a bottle or a can) and sold. When the container is opened, the CO2 pressure is released, resulting in the well-known hiss, and CO2 bubbles come out of solution (Figure 6.5 (Opening a Carbonated Beverage). This must be done with care: if the CO2 comes out too violently, a mess can occur!

The second way a beverage can become carbonated is by the ingestion of sugar by yeast, which then generates CO2 as a digestion product. This process is called fermentation. The overall reaction is

C6H12O6(aq) → 2 C2H5OH(aq) + 2 CO2(aq)

When this process occurs in a closed container, the CO2 produced dissolves in the liquid, only to be released from solution when the container is opened. Most fine sparkling wines and champagnes are turned into carbonated beverages this way. Less-expensive sparkling wines are made like sodas and beer, with exposure to high pressures of CO2 gas.

Key Takeaways

The pressure of a gas in a gas mixture is termed the partial pressure.

Dalton’s law of partial pressure states that the total pressure in a gas mixture is the sum of the individual partial pressures.

Collecting gases over water requires that we take the vapour pressure of water into account.

Mole fraction is another way to express the amounts of components in a mixture.

Exercises

What is the total pressure of a gas mixture containing these partial pressures: PN2 = 0.78 atm, PH2 = 0.33 atm, and PO2 = 1.59 atm?

What is the total pressure of a gas mixture containing these partial pressures: PNe = 312 torr, PHe = 799 torr, and PAr = 831 torr?

In a gas mixture of He and Ne, the total pressure is 335 torr and the partial pressure of He is 0.228 atm. What is the partial pressure of Ne?

In a gas mixture of O2 and N2, the total pressure is 2.66 atm and the partial pressure of O2 is 888 torr. What is the partial pressure of N2?

A 3.55 L container has a mixture of 56.7 g of Ar and 33.9 g of He at 33°C. What are the partial pressures of the gases and the total pressure inside the container?

A 772 mL container has a mixture of 2.99 g of H2 and 44.2 g of Xe at 388 K. What are the partial pressures of the gases and the total pressure inside the container?

A sample of O2 is collected over water in a 5.00 L container at 20°C. If the total pressure is 688 torr, how many moles of O2 are collected?

A sample of H2 is collected over water in a 3.55 L container at 50°C. If the total pressure is 445 torr, how many moles of H2 are collected?

A sample of CO is collected over water in a 25.00 L container at 5°C. If the total pressure is 0.112 atm, how many moles of CO are collected?

A sample of NO2 is collected over water in a 775 mL container at 25°C. If the total pressure is 0.990 atm, how many moles of NO2 are collected?

A sample of NO is collected over water in a 75.0 mL container at 25°C. If the total pressure is 0.495 atm, how many grams of NO are collected?

A sample of ClO2 is collected over water in a 0.800 L container at 15°C. If the total pressure is 1.002 atm, how many grams of ClO2 are collected?

Answers

1.

2.70 atm

3.

162 torr, or 0.213 atm

5.

PAr = 10.0 atm; PHe = 59.9 atm; Ptot = 69.9 atm

7.

0.183 mol

9.

0.113 mol

11.

0.0440 g

Chapter 47

7.6 Kinetic Molecular Theory of Gases

Learning Objectives

State the major concepts behind the kinetic molecular theory of gases.

Demonstrate the relationship between kinetic energy and molecular speed.

Apply the kinetic molecular theory to explain and predict the gas laws.

Gases were among the first substances studied using the modern scientific method, which was developed in the 1600s. It did not take long to recognize that gases all shared certain physical behaviours, suggesting that gases could be described by one all-encompassing theory. The kinetic molecular theory of gases is a model that helps us understand the physical properties of gases at the molecular level. It is based on the following concepts:

Gases consist of particles (molecules or atoms) that are in constant random motion.

Gas particles are constantly colliding with each other and the walls of their container. These collisions are elastic; that is, there is no net loss of energy from the collisions.

Gas particles are small and the total volume occupied by gas molecules is negligible relative to the total volume of their container.

There are no interactive forces (i.e., attraction or repulsion) between the particles of a gas.

The average kinetic energy of gas particles is proportional to the absolute temperature of the gas, and all gases at the same temperature have the same average kinetic energy.

The kinetic molecular theory of gases describes this state of matter as composed of tiny particles in constant motion with a lot of distance between the particles. Because most of the volume occupied by a gas is empty space, a gas has a low density and can expand or contract under the appropriate influence. The fact that gas particles are in constant motion means that two or more gases will always mix as the particles from the individual gases move and collide with each other. The number of collisions the gas particles make with the walls of their container and the force with which they collide determine the magnitude of the gas pressure.

Kinetic Energy and Molecular Speed

Gas particles are in constant motion, and any object in motion has kinetic energy (Ek). Kinetic energy, for an individual atom, can be calculated by the following equation where m is the mass, and u is the speed.

Ek = 1/2 mu2

Overall the molecules in a sample of a gas share an average kinetic energy; however, individual molecules exhibit a distribution of kinetic energies because of having a distribution of speeds (Figure 7.7 “Stylized molecular speed distribution”). This distribution of speeds arises from the collisions that occur between molecules in the gas phase. Although these collisions are elastic (there is no net loss of energy), the individual speeds of each molecule involved in the collision may change. For example, in the collision of two molecules, one molecule may be deflected at a slightly higher speed and the other at a slightly lower speed, but the average kinetic energy does not change.

When analyzing a diagram of the distribution of molecular speeds, there are several commonly used terms to be familiar with. The most probable speed (ump) is the speed of the largest number of molecules, and corresponds to the peak of the distribution. The average speed (uav) is the mean speed of all gas molecules in the sample. The root-mean-square (rms) speed (urms) corresponds to the speed of molecules having exactly the same kinetic energy as the average kinetic energy of the sample.8

According to the kinetic molecular theory, the average kinetic energy of gas particles is proportional to the absolute temperature of the gas. This can be expressed with the following equation where k represents the Boltzmann constant. The Boltzmann constant is simply the gas constant R divided by the Avogadro’s constant (NA). The bar above certain terms indicates they are average values.

Since average kinetic energy is related both to the absolute temperature and the molecular speed, we can combine the equation above with the previous one to determine the rms speed.

This demonstrates that the rms speed is related to the temperature. We can further manipulate this equation by multiplying the numerator and denominator by Avogadro’s constant (NA) to give us a form using the gas constant (R) and molar mass (M).

This form of the equation demonstrates that the rms speed of gas molecules is also related to the molar mass of the substance. Comparing two gases of different molar mass at the same temperature, we see that despite having the same average kinetic energy, the gas with the smaller molar mass will have a higher rms speed.2

Example 19 Calculate the rms speed of nitrogen molecules at 25ºC.Solution Knowing that 1 J = 1 kg m2 s-2 we can convert to metres per second:

Applying the Kinetic Molecular Theory to the Gas Laws

The kinetic molecular theory can be used to explain or predict the experimental trends that were used to generate the gas laws. Let’s work through a few scenarios to demonstrate this point.

What will happen to the pressure of a system where the volume is decreased at constant temperature?

This problem can be approached in two ways:

1. The ideal gas law can be rearranged to solve for pressure and estimate the change in pressure:

Volume is located in the denominator of the equation, and it is being decreased. This means the rest of the equation is being divided by a smaller number, so that should make the pressure larger.

2. The kinetic molecular theory can be used. Since the temperature is remaining constant, the average kinetic energy and the rms speed remain the same as well. The volume of the container has decreased, which means that the gas molecules have to move a shorter distance to have a collision. There will therefore be more collisions per second, causing an increase in pressure.

What will happen to the pressure of a system where the temperature is increased and the volume remains constant?

Again, this type of problem can be approached in two ways:

1. The ideal gas law can be rearranged to solve for pressure and estimate the change in pressure.

Temperature is located in the numerator; there is a direct relationship between temperature and pressure. Therefore an increase in temperature should cause an increase in pressure.

2. The kinetic molecular theory can be used. Temperature is increased, so the average kinetic energy and the rms speed should also increase. This means that the gas molecules will hit the container walls more frequently and with greater force because they are all moving faster. This should increase the pressure.

Key Takeaways

The physical behaviour of gases is explained by the kinetic molecular theory of gases.

The number of collisions that gas particles make with the walls of their container and the force at which they collide determine the magnitude of the gas pressure.

Temperature is proportional to average kinetic energy.

Exercises

State the ideas of the kinetic molecular theory of gases.

Calculate the rms speed of CO2 at 40°C.

Using the kinetic molecular theory, explain how an increase in the number of moles of gas at constant volume and temperature affects the pressure.

Answers

Gases consist of tiny particles of matter that are in constant motion. Gas particles are constantly colliding with each other and the walls of a container. These collisions are elastic; that is, there is no net loss of energy from the collisions. Gas particles are separated by large distances. The size of gas particles is tiny compared to the distances that separate them and the volume of the container. There are no interactive forces (i.e., attraction or repulsion) between the particles of a gas. The average kinetic energy of gas particles is dependent on the temperature of the gas.

421 m/s

Temperature remains the same, so the average kinetic energy and the rms speed should remain the same. Increasing the number of moles of gas means there are more molecules of gas available to collide with the walls of the container at any given time. Therefore pressure should increase.

Chapter 48

7.7 Molecular Effusion and Diffusion

Learning Objectives

Explore the nature of gas movement: molecular effusion and diffusion.

Examine and apply Graham’s law of effusion.

Effusion

The movement of gas molecules can be divided into a few different types. Effusion is the movement of gas molecules from one container to another via a tiny hole. Typically the container to which the gas is moving is kept under lower pressure.

In 1846, the Scottish chemist Thomas Graham found that the rate of effusion of a gas (the amount of gas transferred between containers in a certain amount of time) is inversely proportional to the square root of its molar mass. This means that gases with a lighter molecular weight have higher effusion rates.

This finding is summarized in Graham’s law of effusion:

This finding can be rationalized by thinking through the process of effusion on the molecular level. For a gas molecule to successfully move from one container to another, it must hit and pass through the tiny hole present in the container. Gases with higher rms speed are more likely to hit and pass through the hole so effusion is dependent on rms speed:

Example 20 An unknown halogen (diatomic) gas effuses at a rate that is approximately 1.89 times the rate of I2 gas at the same temperature. Determine the molar mass and identity of this unknown gas. Solution M2 = 71.1 g/mol. Therefore the unknown gas is Cl2

Diffusion

Another type of gas movement is called diffusion; it is the movement of gas molecules through one or more additional types of gas via random molecular motion. Similar to effusion, gases with lower molecular weights (which have a higher rms speed) diffuse faster than gases with higher molecular weights. However, in diffusion, movement is much more complicated as collisions occur between molecules that change the direction and speed of the molecules. As a result of these collisions, the path a molecule travels in diffusion is made up of numerous straight, short segments. The term mean free path is used to describe the average distance travelled by a molecule between collisions.

Watch the ViuTube hosted video on Diffusion by Jessie Key.

Key Takeaways

Effusion is the movement of gas molecules from one container to another through a tiny hole.

Rates of effusion can be compared at the same temperature using Graham’s law.

Diffusion is the movement of gas molecules through one or more other types of gas via random molecular motion.

Both the rates of effusion and diffusion are influenced by the molecular weight of the gas particle.

Chapter 49

7.8 Real Gases

Learning Objectives

To examine the differences between ideal and real gases.

To explore the effects of high pressure and low temperature on real gas samples.

To apply van der Waal’s equation to correct the ideal gas law for real gases using the experimentally determined constants a and b.

An ideal gas is one that conforms exactly to the tenets of the kinetic molecular theory, where the volume occupied by the gas particles is negligible relative to the total volume of the container, and there are no appreciable intermolecular attractions or repulsions.

Real gases can deviate from ideal behaviour, especially at high pressures and low temperatures. The extent of deviation is measured using the compressibility factor. The compressibility factor is obtained by solving for n in the ideal gas law: dividing the product of pressure and volume by the product of the gas constant and temperature (PV/RT) for one mole of a given substance. Under ideal conditions, this ratio of PV/RT should be exactly equal to 1.

Real Gases at High Pressure

At higher pressures, gas molecules are closer together in a space. As a result of this crowding, gas molecules experience greater attractive intermolecular forces. Intermolecular forces hold molecules together more, lessening the force and frequency of collisions with the container wall and thus lowering the pressure below ideal values. As well, at higher pressure, molecules occupy a larger proportion of the volume of the container. With other gas molecules taking up a larger proportion of the volume of the container, the unoccupied volume of the container available to any one molecule is smaller than in ideal conditions. This decrease in available volume causes an increase in pressure beyond ideal conditions.

Real Gases at Low Temperature

Temperature also influences deviations from ideal gas behaviour (Figure 7.15). As temperature decreases, the average kinetic energy of the gas particles decreases. A larger proportion of gas molecules therefore have insufficient kinetic energy to overcome attractive intermolecular forces from neighbouring atoms. This means that gas molecules become “stickier” to each other, and collide with the walls of the container with less frequency and force, decreasing pressure below that of ideal values.

The van der Waals Equation

In 1873, Dutch scientist Johannes van der Waals developed an equation that compensates for deviations from ideal gas behaviour. The van der Waals equation uses two additional experimentally determined constants: a, which is a term to correct for intermolecular forces, and b, which corrects for the volume of the gas molecules (Table 7.3 “Selected van der Waals Constants for Gas Molecules”).

It should be noted that if the new terms a and b are equal to zero (under ideal conditions), the equation simplifies back to the ideal gas law: PV = nRT.

Table 7.3 Selected van der Waals Constants for Gas Molecules. 2

a (L2atm/mol2)	b (L/mol)
Helium	0.03457	0.0237
Neon	0.2135	0.01709
Hydrogen	0.2476	0.02661
Argon	1.355	0.0320
Nitric oxide	1.358	0.02789
Oxygen	1.378	0.03183
Nitrogen	1.408	0.03913
Carbon monoxide	1.505	0.03985
Methane	2.283	0.04278
Krypton	2.349	0.03978
Carbon dioxide	3.640	0.04267
Hydrogen chloride	3.716	0.04081
Nitrous oxide	3.832	0.04415
Ammonia	4.225	0.0371
Xenon	4.250	0.05105

Example 21 Use the van der Waals equation and Table 7.3 to determine the pressure, in atmospheres, of 2.00 moles of oxygen gas in a 30.00 L flask at 25.0oC. Solution P =1.63 atm

Key Takeaways

An ideal gas is one that conforms exactly to the tenets of the kinetic molecular theory, where the volume occupied by the gas particles is negligible relative to the total volume of the container and there are no appreciable intermolecular attractions or repulsions.

A real gas is one that deviates from ideal behaviour, due to the effects of gas particles occupying a finite volume and the strength of intermolecular forces.

The van der Waal’s equation compensates for deviations from ideal gas behaviour.

Adapted from van der Waals constants by

/

Chapter 50

7.9 End-of-Chapter Material

Additional Exercises

What is the pressure in pascals if a force of 4.88 kN is pressed against an area of 235 cm2?

What is the pressure in pascals if a force of 3.44 ×104 MN is pressed against an area of 1.09 km2?

What is the final temperature of a gas whose initial conditions are 667 mL, 822 torr, and 67°C, and whose final volume and pressure are 1.334 L and 2.98 atm, respectively? Assume the amount remains constant.

What is the final pressure of a gas whose initial conditions are 1.407 L, 2.06 atm, and −67°C, and whose final volume and temperature are 608 mL and 449 K, respectively? Assume the amount remains constant.

Propose a combined gas law that relates volume, pressure, and amount at constant temperature.

Propose a combined gas law that relates amount, pressure, and temperature at constant volume.

A sample of 6.022 ×1023 particles of gas has a volume of 22.4 L at 0°C and a pressure of 1.000 atm. Although it may seem silly to contemplate, what volume would one particle of gas occupy?

One mole of liquid N2 has a volume of 34.65 mL at −196°C. At that temperature, 1 mol of N2 gas has a volume of 6.318 L if the pressure is 1.000 atm. What pressure is needed to compress the N2 gas to 34.65 mL?

Use two values of R to determine the ratio between an atmosphere and a torr. Does the number make sense?

Use two values of R to determine how many joules are in a liter·atmosphere.

11. At an altitude of 40 km above the earth’s surface, the atmospheric pressure is 5.00 torr, and the surrounding temperature is −20°C. If a weather balloon is filled with 1.000 mol of He at 760 torr and 22°C, what is its

a) initial volume before ascent?

b) final volume when it reaches 40 km in altitude? (Assume the pressure of the gas equals the surrounding pressure.)

12. If a balloon is filled with 1.000 mol of He at 760 torr and 22°C, what is its

a) initial volume before ascent?

b) final volume if it descends to the bottom of the Mariana Trench, where the surrounding temperature is 1.4°C and the pressure is 1,060 atm?

13. Air, a mixture of mostly N2 and O2, can be approximated as having a molar mass of 28.8 g/mol. What is the density of air at 1.00 atm and 22°C? (This is approximately sea level.)

14. Air, a mixture of mostly N2 and O2, can be approximated as having a molar mass of 28.8 g/mol. What is the density of air at 0.26 atm and −26°C? (This is approximately the atmospheric condition at the summit of Mount Everest.)

15. On the surface of Venus, the atmospheric pressure is 91.8 atm, and the temperature is 460°C. What is the density of CO2 under these conditions? (The Venusian atmosphere is composed largely of CO2.)

16. On the surface of Mars, the atmospheric pressure is 4.50 torr, and the temperature is −87°C. What is the density of CO2 under these conditions? (The Martian atmosphere, similar to its Venusian counterpart, is composed largely of CO2.)

17. HNO3 reacts with iron metal according to Fe(s) + 2HNO3(aq) → Fe(NO3)2(aq) + H2(g) In a reaction vessel, 23.8 g of Fe are reacted but only 446 mL of H2 are collected over water at 25°C and a pressure of 733 torr. What is the percent yield of the reaction?

18. NaHCO3 is decomposed by heat according to 2NaHCO3(s) → Na2CO3(s) + H2O(ℓ) + CO2(g) If you start with 100.0 g of NaHCO3 and collect 10.06 L of CO2 over water at 20°C and 0.977 atm, what is the percent yield of the decomposition reaction?

19. Determine if the following actions will cause the pressure of a particular gas sample to increase, decrease, or remain the same:

a) decreasing the temperature

b) decreasing the molar mass of the gas

c) decreasing the volume of the container

20. Under what conditions do gases deviate most from ideal gas behaviour? Explain your answer.

21. Place the following gases in order from lowest to highest average molecular speed at 25°C: He, Ar, O2, I2.

22. The effusion rate of an unknown noble gas sample is 0.35 times that of neon, at the same temperature. Determine the molecular weight and identity of the unknown noble gas.

23. Use the van der Waal’s equation to determine the pressure of 2.00 moles of helium in a 5.00 L balloon at 300.00 K. How does this value compare to what you would obtain with the ideal gas law?

Answers

1. 208,000 Pa

3. 1,874 K

5.

7. 3.72 × 10-23 L

9. 1 atm = 760 torr

11.

11.1. 24.2 L
11.2. 3155 L

13. 1.19 g/L

15. 67.2 g/L

17. 3.99%

19.

19.1. decreased pressure
19.2. increased pressure
19.3. increased pressure

21. I2 < Ar < O2 < He

23. van der Waals: 9.94 atm, ideal: 9.85 atm

PART VI

Unit 6 Energy & Thermodynamics

Chapter 51

Chapter 8. Energy and Chemistry

Introduction to Energy and Chemistry

It takes energy to launch a spaceship into space. If it takes 1 energy unit to warm 0.25 g of water by 1°C, then it takes over 15,100 energy units to put that 0.25 g of water into earth orbit. The most powerful engines designed to lift rockets into space were part of the Saturn V rocket, that was built by the National Aeronautics and Space Administration (NASA). The rocket had three stages, with the first stage having the capability of launching about 3.5 million kg of mass. About 2.3 million kg was the actual fuel for the first stage; rockets in space have the unpleasant task of having to take their own chemicals with them to provide thrust.

Figure 8.1 “Soyuz TMA-5 Launch.” It takes a lot of energy to launch a rocket into space. The Saturn V rocket used five of the most powerful engines ever built to take its initial step into orbit.

Source: “Soyuz TMA-5 launch” s in the public domain because it was solely created by NASA.

Having to carry its own fuel puts a lot of mass burden on an engine in space. This is why NASA is developing other types of engines to minimize fuel mass. An ion thruster uses xenon atoms that have had at least one electron removed from their atoms. The resulting ions can be accelerated by electric fields, causing a thrust. Because xenon atoms are very large for atoms, the thrusting efficiency is high even though the actual thrust is low. Because of this, ion engines are useful only in space.

Energy is a very important quantity in science and the world around us. Although most of our energy ultimately comes from the sun, much of the energy we use on a daily basis is rooted in chemical reactions. The gasoline in your car, the electricity in your house, the food in your diet—all provide substances for chemical reactions to provide energy (gasoline, food) or are produced from chemical reactions (electricity, about 50% of which is generated by burning coal). As such, it is only natural that the study of chemistry involves energy.

Chapter 52

8.1 Energy

Learning Objectives

Define energy.

Know the units of energy.

Understand the law of conservation of energy.

Energy: is the ability to do work. Think about it: when you have a lot of energy, you can do a lot of work; but if you’re low on energy, you don’t want to do much work. Work (w) itself is defined as a force (F) operating over a distance (Δx):

w = F × Δx

In SI, force has units of newtons (N), while distance has units of meters. Therefore, work has units of N·m. This compound unit is redefined as a joule (J):

1 joule = 1 newton·meter
1 J = 1 N·m

Because energy is the ability to do work, energy is also measured in joules. This is the primary unit of energy we will use here.

How much is 1 J? It is enough to warm up about one-fourth of a gram of water by 1°C. It takes about 12,000 J to warm a cup of coffee from room temperature to 50°C. So a joule is not a lot of energy. It will not be uncommon to measure energies in thousands of joules, so the kilojoule (kJ) is a common unit of energy, with 1 kJ equal to 1,000 J.

An older—but still common—unit of energy is the calorie. The calorie (cal) was originally defined in terms of warming up a given quantity of water. The modern definition of calorie equates it to joules:

1 cal = 4.184 J

One area where the calorie is used is in nutrition. Energy contents of foods are often expressed in calories. However, the calorie unit used for foods is actually the kilocalorie (kcal). Most foods indicate this by spelling the word with a capital C—Calorie. Figure 7.1 “Calories on Food Labels” shows one example. So be careful counting calories when you eat!

Calories on Food Labels. This label expresses the energy content of the food, but in Calories (which are actually kilocalories).

Source: “FDA Nutrition Facts Label 2014′′ by U.S. Food and Drug Administration is in the public domain.

Example 1 The label in Figure 8.1 “Calories on Food Labels” states that the serving has 38 Cal. How many joules is this? Solution We recognize that with a capital C, the Calories unit is actually kilocalories. To determine the number of joules, we convert first from kilocalories to calories (using the definition of the kilo- prefix) and then from calories to joules (using the relationship between calories and joules). So Test Yourself A serving of breakfast cereal usually has 110 Cal. How many joules of energy is this? Answer 460,000 J

In the study of energy, we use the term system to describe the part of the universe under study: a beaker, a flask, or a container whose contents are being observed and measured. An isolated system is a system that does not allow a transfer of energy or matter into or out of the system. A good approximation of an isolated system is a closed, insulated thermos-type bottle. The fact that the thermos-type bottle is closed keeps matter from moving in or out, and the fact that it is insulated keeps energy from moving in or out.

One of the fundamental ideas about the total energy of an isolated system is that is does not increase or decrease. When this happens to a quantity, we say that the quantity is conserved. The statement that the total energy of an isolated system does not change is called the law of conservation of energy. As a scientific law, this concept occupies the highest level of understanding we have about the natural universe.

Key Takeaways

Energy is the ability to do work and uses the unit joule.

The law of conservation of energy states that the total energy of an isolated system does not increase or decrease.

Exercises

Define energy. How is work related to energy?

Give two units of energy and indicate which one is preferred.

Express the quantity of 422 J in calories.

Express the quantity of 3.225 kJ in calories.

Express the quantity 55.69 cal in joules.

Express the quantity 965.33 kcal in joules.

How does a Calorie differ from a calorie?

Express the quantity 965.33 Cal in joules.

What is the law of conservation of energy?

What does the word conserved mean as applied to the law of conservation of energy?

Answers

1.

Energy is the ability to do work. Work is a form of energy.

3.

101 cal

5.

233.0 J

7.

A Calorie is actually a kilocalorie, or 1,000 calories.

9.

The total energy of an isolated system does not increase or decrease.

Chapter 53

8.2 Work and Heat

Learning Objectives

Define a type of work in terms of pressure and volume.

Define heat.

Relate the amount of heat to a temperature change.

We have already defined work as a force acting through a distance. It turns out that there are other equivalent definitions of work that are also important in chemistry.

When a certain volume of a gas expands, it works against an external pressure to expand (Figure 8.2 “Volume versus Pressure”). That is, the gas must perform work. Assuming that the external pressure Pext is constant, the amount of work done by the gas is given by the equation

w = −Pext × ΔV

where ΔV is the change in volume of the gas. This term is always the final volume minus the initial volume,

ΔV = Vfinal − Vinitial

and can be positive or negative, depending on whether Vfinal is larger (is expanding) or smaller (is contracting) than Vinitial. The negative sign in the equation for work is important and implies that as volume expands (ΔV is positive), the gas in the system is losing energy as work. On the other hand, if the gas is contracting, ΔV is negative, and the two negative signs make the work positive, so energy is being added to the system.

When a gas expands against an external pressure, the gas does work.

Finally, let us consider units. Volume changes are usually expressed in units like liters, while pressures are usually expressed in atmospheres. When we use the equation to determine work, the unit for work comes out as liter·atmospheres, or L·atm. This is not a very common unit for work. However, there is a conversion factor between L·atm and the common unit of work, joules:

1 L·atm = 101.32 J

Using this conversion factor and the previous equation for work, we can calculate the work performed when a gas expands or contracts.

Example 2 What is the work performed by a gas if it expands from 3.44 L to 6.19 L against a constant external pressure of 1.26 atm? Express the final answer in joules. Solution First we need to determine the change in volume, ΔV. A change is always the final value minus the initial value: ΔV = Vfinal − Vinitial = 6.19 L − 3.44 L = 2.75 L Now we can use the definition of work to determine the work done: w = −Pext · ΔV = −(1.26 atm)(2.75 L) = −3.47 L·atm Now we construct a conversion factor from the relationship between liter·atmospheres and joules: We limit the final answer to three significant figures, as appropriate. Test Yourself What is the work performed when a gas expands from 0.66 L to 1.33 L against an external pressure of 0.775 atm? Answer −53 J

Heat is another aspect of energy. Heat is the transfer of energy from one body to another due to a difference in temperature. For example, when we touch something with our hands, we interpret that object as either hot or cold depending on how energy is transferred: If energy is transferred into your hands, the object feels hot. If energy is transferred from your hands to the object, your hands feel cold. Because heat is a measure of energy transfer, heat is also measured in joules.

For a given object, the amount of heat (q) involved is proportional to two things: the mass of the object (m) and the temperature change (ΔT) evoked by the energy transfer. We can write this mathematically as

q∝m × ΔT

where ∝ means “is proportional to.” To make a proportionality an equality, we include a proportionality constant. In this case, the proportionality constant is labelled c and is called the specific heat capacity, or, more succinctly, specific heat:

q = mcΔT

where the mass, specific heat, and change in temperature are multiplied together. Specific heat is a measure of how much energy is needed to change the temperature of a substance; the larger the specific heat, the more energy is needed to change the temperature. The units for specific heat are Jg⋅°C or Jg⋅K, depending on what the unit of ΔT is. You may note a departure from the insistence that temperature be expressed in Kelvin. That is because a change in temperature has the same value whether the temperatures are expressed in degrees Celsius or kelvins.

Example 3 Calculate the heat involved when 25.0 g of Fe increase temperature from 22°C to 76°C. The specific heat of Fe is 0.449 J/g·°C. Solution First we need to determine ΔT. A change is always the final value minus the initial value: ΔT = 76°C − 22°C = 54°C Now we can use the expression for q, substitute for all variables, and solve for heat: Note how the g and °C units cancel, leaving J, a unit of heat. Also note that this value of q is inherently positive, meaning that energy is going into the system. Test Yourself Calculate the heat involved when 76.5 g of Ag increase temperature from 17.8°C to 144.5°C. The specific heat of Ag is 0.233 J/g·°C. Answer 2,260 J

As with any equation, when you know all but one variable in the expression for q, you can determine the remaining variable by using algebra.

Example 4 It takes 5,408 J of heat to raise the temperature of 373 g of Hg by 104°C. What is the specific heat of Hg? Solution We can start with the equation for q, but now different values are given, and we need to solve for specific heat. Note that ΔT is given directly as 104°C. Substituting, 5,408 J = (373 g)c(104°C) We divide both sides of the equation by 373 g and 104°C: Combining the numbers and bringing together all the units, we get Test Yourself Gold has a specific heat of 0.129 J/g·°C. If 1,377 J are needed to increase the temperature of a sample of gold by 99.9°C, what is the mass of the gold? Answer 107 g

Table 8.1 “Specific Heats of Various Substances” lists the specific heats of some substances. Specific heat is a physical property of substances, so it is a characteristic of the substance. The general idea is that the lower the specific heat, the less energy is required to change the temperature of the substance by a certain amount.

Table 8.1 Specific Heats of Various Substances

Substance	Specific Heat (J/g·°C)
water	4.184
iron	0.449
gold	0.129
mercury	0.139
aluminum	0.900
ethyl alcohol	2.419
magnesium	1.03
helium	5.171
oxygen	0.918

Key Takeaways

Work can be defined as a gas changing volume against a constant external pressure.

Heat is the transfer of energy due to temperature differences.

Heat can be calculated in terms of mass, temperature change, and specific heat.

Exercises

Give two definitions of work.

What is the sign on work when a sample of gas increases its volume? Explain why work has that sign.

What is the work when a gas expands from 3.00 L to 12.60 L against an external pressure of 0.888 atm?

What is the work when a gas expands from 0.666 L to 2.334 L against an external pressure of 2.07 atm?

What is the work when a gas contracts from 3.45 L to 0.97 L under an external pressure of 0.985 atm?

What is the work when a gas contracts from 4.66 L to 1.22 L under an external pressure of 3.97 atm?

Like work, the sign on heat can be positive or negative. What is happening to the total energy of a system if heat is positive?

Like work, the sign on heat can be positive or negative. What is happening to the total energy of a system if heat is negative?

What is the heat when 55.6 g of Fe increase temperature from 25.6°C to 177.9°C? The heat capacity of Fe is in Table 8.1 “Specific Heats of Various Substances”.

What is the heat when 0.444 g of Au increases temperature from 17.8°C to 222.5°C? The heat capacity of Au is in Table 8.1 “Specific Heats of Various Substances”.

What is the heat when 245 g of H2O cool from 355 K to 298 K? The heat capacity of H2O is in Table 8.1 “Specific Heats of Various Substances”.

What is the heat when 100.0 g of Mg cool from 725 K to 552 K? The heat capacity of Mg is in Table 8.1 “Specific Heats of Various Substances”.

It takes 452 J of heat to raise the temperature of a 36.8 g sample of a metal from 22.9°C to 98.2°C. What is the heat capacity of the metal?

It takes 2,267 J of heat to raise the temperature of a 44.5 g sample of a metal from 33.9°C to 288.3°C. What is the heat capacity of the metal?

An experimenter adds 336 J of heat to a 56.2 g sample of Hg. What is its change in temperature? The heat capacity of Hg is in Table 8.1 “Specific Heats of Various Substances”.

To a 0.444 g sample of H2O, 23.4 J of heat are added. What is its change in temperature? The heat capacity of H2O is in Table 8.1 “Specific Heats of Various Substances”.

An unknown mass of Al absorbs 187.9 J of heat and increases its temperature from 23.5°C to 35.6°C. What is the mass of the aluminum? How many moles of aluminum is this?

A sample of He goes from 19.4°C to 55.9°C when 448 J of energy are added. What is the mass of the helium? How many moles of helium is this?

Answers

1.

Work is a force acting through a distance or a volume changing against some pressure.

3.

−864 J

5.

248 J

7.

When heat is positive, the total energy of the system is increasing.

9.

3.80 × 103 J

11.

−58,400 J

13.

0.163 J/g·°C

15.

43.0°C

17.

17.3 g; 0.640 mol

Chapter 54

8.3 Enthalpy and Chemical Reactions

Learning Objectives

Define enthalpy.

Properly express the enthalpy change of chemical reactions.

Explain how enthalpy changes are measured experimentally.

Now that we have shown how energy, work, and heat are related, we are ready to consider energy changes in chemical reactions. A fundamental concept is that every chemical reaction occurs with a concurrent change in energy. Now we need to learn how to properly express these energy changes.

Our study of gases in Chapter 6 “Gases” and our definition of work in Section 7.2 “Work and Heat” indicate that conditions like pressure, volume, and temperature affect the energy content of a system. What we need is a definition of energy that holds when some of these conditions are specified (somewhat similar to our definition of standard temperature and pressure in our study of gases). We define the enthalpy change (ΔH) as the heat of a process when pressure is held constant:

ΔH ≡ q at constant pressure

The letter H stands for “enthalpy,” a kind of energy, while the Δ implies a change in the quantity. We will always be interested in the change in H, rather than the absolute value of H itself.

When a chemical reaction occurs, there is a characteristic change in enthalpy. The enthalpy change for a reaction is typically written after a balanced chemical equation and on the same line. For example, when two moles of hydrogen react with one mole of oxygen to make two moles of water, the characteristic enthalpy change is 570 kJ. We write the equation as

2 H2(g) + O2(g) → 2 H2O(ℓ) ΔH = −570 kJ

A chemical equation that includes an enthalpy change is called a thermochemical equation. A thermochemical equation is assumed to refer to the equation in molar quantities, which means it must be interpreted in terms of moles, not individual molecules.

Example 5 Write the thermochemical equation for the reaction of PCl3(g) with Cl2(g) to make PCl5(g), which has an enthalpy change of −88 kJ. Solution The thermochemical equation is PCl3(g) + Cl2(g) → PCl5(g) ΔH = −88 kJ Test Yourself Write the thermochemical equation for the reaction of N2(g) with O2(g) to make 2NO(g), which has an enthalpy change of 181 kJ. Answer N2(g) + O2(g) → 2 NO(g) ΔH = 181 kJ

You may have noticed that the ΔH for a chemical reaction may be positive or negative. The number is assumed to be positive if it has no sign; a + sign can be added explicitly to avoid confusion. A chemical reaction that has a positive ΔH is said to be endothermic, while a chemical reaction that has a negative ΔH is said to be exothermic.

What does it mean if the ΔH of a process is positive? It means that the system in which the chemical reaction is occurring is gaining energy. If one considers the energy of a system as being represented as a height on a vertical energy plot, the enthalpy change that accompanies the reaction can be diagrammed as in part (a) in Figure 7.3 “Reaction Energy”: the energy of the reactants has some energy, and the system increases its energy as it goes to products. The products are higher on the vertical scale than the reactants. Endothermic, then, implies that the system gains, or absorbs, energy.

An opposite situation exists for an exothermic process, as shown in part (b) in Figure 7.3 “Reaction Energy”. If the enthalpy change of a reaction is negative, the system is losing energy, so the products have less energy than the reactants, and the products are lower on the vertical energy scale than the reactants are. Exothermic, then, implies that the system loses, or gives off, energy.

Example 6 Consider this thermochemical equation. 2 CO(g) + O2(g) → 2 CO2(g) ΔH = −565 kJ Is it exothermic or endothermic? How much energy is given off or absorbed? Solution By definition, a chemical reaction that has a negative ΔH is exothermic, meaning that this much energy—in this case, 565 kJ—is given off by the reaction. Test Yourself Consider this thermochemical equation. CO2(g) + H2(g) → CO(g) + H2O(g) ΔH = 42 kJ Is it exothermic or endothermic? How much energy is given off or absorbed? Answer Endothermic; 42 kJ are absorbed.

How are ΔH values measured experimentally? Actually, ΔH is not measured; q is measured. But the measurements are performed under conditions of constant pressure, so ΔH is equal to the q measured.

Experimentally, q is measured by taking advantage of the equation

q = mcΔT

We premeasure the mass of the chemicals in a system. Then we let the chemical reaction occur and measure the change in temperature (ΔT) of the system. If we know the specific heat of the materials in the system (typically, we do), we can calculate q. That value of q is numerically equal to the ΔH of the process, which we can scale up to a molar scale. The container in which the system resides is typically insulated, so any energy change goes into changing the temperature of the system, rather than being leaked from the system. The container is referred to as a calorimeter, and the process of measuring changes in enthalpy is called calorimetry.

For example, suppose 4.0 g of NaOH, or 0.10 mol of NaOH, are dissolved to make 100.0 mL of aqueous solution, while 3.65 g of HCl, or 0.10 mol of HCl, are dissolved to make another 100.0 mL of aqueous solution. The two solutions are mixed in an insulated calorimeter, a thermometer is inserted, and the calorimeter is covered (see Figure 7.4 “Calorimeters” for an example setup). The thermometer measures the temperature change as the following chemical reaction occurs:

NaOH (aq) + HCl(aq) → NaCl(aq) + H2O(ℓ)

An observer notes that the temperature increases from 22.4°C to 29.1°C. Assuming that the heat capacities and densities of the solutions are the same as those of pure water, we now have the information we need to determine the enthalpy change of the chemical reaction. The total amount of solution is 200.0 mL, and with a density of 1.00 g/mL, we thus have 200.0 g of solution. Using the equation for q, we substitute for our experimental measurements and the specific heat of water (Table 8.1 “Specific Heats of Various Substances”):

Solving for q, we get

q = 5,600 J ≡ ΔH for the reaction

The heat q is equal to the ΔH for the reaction because the chemical reaction occurs at constant pressure. However, the reaction is giving off this amount of energy, so the actual sign on ΔH is negative:

ΔH = −5,600 J for the reaction

Thus, we have the following thermochemical equation for the chemical reaction that occurred in the calorimeter:

The 1/10 coefficients are present to remind us that we started with one-tenth of a mole of each reactant, so we make one-tenth of a mole of each product. Typically, however, we report thermochemical equations in terms of moles, not one-tenth of a mole. To scale up to molar quantities, we must multiply the coefficients by 10. However, when we do this, we get 10 times as much energy. Thus, we have

NaOH (aq) + HCl(aq) → NaCl(aq) + H2O(ℓ) ΔH = −56,000 J

The ΔH can be converted into kJ units, so our final thermochemical equation is

NaOH (aq) + HCl(aq) → NaCl(aq) + H2O(ℓ) ΔH = −56 kJ

We have just taken our experimental data from calorimetry and determined the enthalpy change of a chemical reaction. Similar measurements on other chemical reactions can determine the ΔH values of any chemical reaction you want to study.

Example 7 A 100 mL solution of 0.25 mol of Ca2+(aq) was mixed with 0.50 mol of F−(aq) ions, and CaF2 was precipitated: Ca2+(aq) + 2 F−(aq) → CaF2(s) The temperature of the solution increased by 10.5°C. What was the enthalpy change for the chemical reaction? What was the enthalpy change for the production of 1 mol of CaF2? Assume that the solution has the same density and specific heat as water. Solution Because we are given ΔT directly, we can determine the heat of the reaction, which is equal to ΔH: Solving for q, we get q = 4,400 J Therefore, ΔH = −4,400 J. According to the stoichiometry of the reaction, exactly 0.25 mol of CaF2 will form, so this quantity of heat is for 0.25 mol. For 1 mol of CaF2, we need to scale up the heat by a factor of four: q = 4,400 J × 4 = 17,600 J for 1 mol CaF2 On a molar basis, the change in enthalpy is ΔH = −17,600 J = −17.6 kJ Test Yourself In a calorimeter at constant pressure, 0.10 mol of CH4(g) and 0.20 mol of O2(g) are reacted. CH4(g) + 2 O2(g) → CO2(g) + 2 H2O(ℓ) The reaction warms 750.0 g of H2O by 28.4°C. What is ΔH for the reaction on a molar scale? Answer −891 kJ

Key Takeaways

Every chemical reaction occurs with a concurrent change in energy.

The change in enthalpy equals heat at constant pressure.

Enthalpy changes can be expressed by using thermochemical equations.

Enthalpy changes are measured by using calorimetry.

Exercises

Under what circumstances are q and ΔH the same?

Under what circumstances are q and ΔH different?

Hydrogen gas and chlorine gas react to make hydrogen chloride gas with an accompanying enthalpy change of −184 kJ. Write a properly balanced thermochemical equation for this process.

Propane (C3H8) reacts with elemental oxygen gas to produce carbon dioxide and liquid water with an accompanying enthalpy change of −2,220 kJ. Write a properly balanced thermochemical equation for this process.

Nitrogen gas reacts with oxygen gas to make NO(g) while absorbing 180 kJ. Write a properly balanced thermochemical equation for this process.

Solid sodium reacts with chlorine gas to make solid sodium chloride while giving off 772 kJ. Write a properly balanced thermochemical equation for this process.

Hydrogen gas and chlorine gas react to make hydrogen chloride gas with an accompanying enthalpy change of −184 kJ. Is this process endothermic or exothermic?

Propane (C3H8) reacts with elemental oxygen gas to produce carbon dioxide while giving off 2,220 kJ of energy. Is this process endothermic or exothermic?

Nitrogen gas reacts with oxygen gas to make NO(g) while absorbing 180 kJ. Is this process exothermic or endothermic?

Sodium metal can react with nitrogen to make sodium azide (NaN3) with a ΔH of 21.72 kJ. Is this process exothermic or endothermic?

Draw an energy level diagram for the chemical reaction in Exercise 8. (See Figure 8.3 “Reaction Energy” for an example.)

Draw an energy level diagram for the chemical reaction in Exercise 9. (See Figure 8.3 “Reaction Energy” for an example.)

In a 250 mL solution, 0.25 mol of KOH(aq) and 0.25 mol of HNO3(aq) are combined. The temperature of the solution increases from 22.5°C to 35.9°C. Assume the solution has the same density and heat capacity of water. What is the heat of the reaction, and what is the ΔH of the reaction on a molar basis?

In a 600 mL solution, 0.50 mol of Ca(OH)2(aq) and 0.50 mol of H2SO4(aq) are combined. The temperature of the solution increases by 22.3°C. What is the heat of the reaction, and what is the ΔH of the reaction on a molar basis? Assume the solution has the same density and heat capacity of water.

To warm 400.0 g of H2O, 0.050 mol of ethanol (C2H5OH) is burned. The water warms from 24.6°C to 65.6°C. What is the heat of the reaction, and what is the ΔH of the reaction on a molar basis?

To warm 100.0 g of H2O, 0.066 mol beeswax is burned. The water warms from 21.4°C to 25.5°C. What is the heat of the reaction, and what is the ΔH of the reaction on a molar basis?

Answers

1.

under conditions of constant pressure

3.

H2(g) + Cl2(g) → 2HCl(g) ΔH = −184 kJ

5.

N2(g) + O2(g) → 2NO(g) ΔH = 180 kJ

7.

exothermic

9.

endothermic

11.

13.

heat of reaction = −14.0 kJ; ΔH = −56.0 kJ/mol of reactants

15.

heat of reaction = −68.6 kJ; ΔH = −1,370 kJ/mole of ethanol

Chapter 55

8.4 Stoichiometry Calculations Using Enthalpy

Learning Objective

1. Perform stoichiometry calculations using energy changes from thermochemical equations.

In Chapter 6 “Stoichiometry and the Mole”, we related quantities of one substance to another in a chemical equation by performing calculations that used the balanced chemical equation; the balanced chemical equation provided equivalences that we used to construct conversion factors. For example, in the balanced chemical equation

2 H2(g) + O2(g) → 2 H2O(ℓ)

we recognized the equivalences

2 mol H2 ⇔ 1 mol O2 ⇔ 2 mol H2O

where ⇔ is the mathematical symbol for “is equivalent to.” In our thermochemical equation, however, we have another quantity—energy change:

2H2(g) + O2(g) → 2H2O(ℓ) ΔH = −570 kJ

This new quantity allows us to add another equivalence to our list:

2 mol H2 ⇔ 1 mol O2 ⇔ 2 mol H2O ⇔ −570 kJ

That is, we can now add an energy amount to the equivalences—the enthalpy change of a balanced chemical reaction. This equivalence can also be used to construct conversion factors so that we can relate enthalpy change to amounts of substances reacted or produced.

Note that these equivalences address a concern. When an amount of energy is listed for a balanced chemical reaction, what amount(s) of reactants or products does it refer to? The answer is that relates to the number of moles of the substance as indicated by its coefficient in the balanced chemical reaction. Thus, 2 mol of H2 are related to −570 kJ, while 1 mol of O2 is related to −570 kJ. This is why the unit on the energy change is kJ, not kJ/mol.

For example, consider the thermochemical equation

H2(g) + Cl2(g) → 2 HCl(g) ΔH = −184.6 kJ

The equivalences for this thermochemical equation are

1 mol H2 ⇔ 1 mol Cl2 ⇔ 2 mol HCl ⇔ −184.6 kJ

Suppose we asked how much energy is given off when 8.22 mol of H2 react. We would construct a conversion factor between the number of moles of H2 and the energy given off, −184.6 kJ:

The negative sign means that this much energy is given off.

Example 8 Given the thermochemical equation N2(g) + 3 H2(g) → 2 NH3(g) ΔH = −91.8 kJ how much energy is given off when 222.4 g of N2 reacts? Solution The balanced thermochemical equation relates the energy change to moles, not grams, so we first convert the amount of N2 to moles and then use the thermochemical equation to determine the energy change: Test Yourself Given the thermochemical equation N2(g) + 3 H2(g) → 2 NH3(g) ΔH = −91.8 kJ how much heat is given off when 1.00 g of H2 reacts? Answer −15.1 kJ

Like any stoichiometric quantity, we can start with energy and determine an amount, rather than the other way around.

Example 9 Given the thermochemical equation N2(g) + O2(g) → 2 NO(g) ΔH = 180.6 kJ if 558 kJ of energy are supplied, what mass of NO can be made? Solution This time, we start with an amount of energy: Test Yourself How many grams of N2 will react if 100.0 kJ of energy are supplied? N2(g) + O2(g) → 2 NO(g) ΔH = 180.6 kJ Answer 15.5 g

Chemistry Is Everywhere: Welding with Chemical Reactions

One very energetic reaction is called the thermite reaction. Its classic reactants are aluminum metal and iron(III) oxide; the reaction produces iron metal and aluminum oxide:

2 Al(s) + Fe2O3(s) → Al2O3(s) + 2 Fe(s) ΔH = −850.2 kJ

When properly done, the reaction gives off so much energy that the iron product comes off as a liquid. (Iron normally melts at 1,536°C.) If carefully directed, the liquid iron can fill spaces between two or more metal parts and, after it quickly cools, can weld the metal parts together.

Thermite reactions are used for this purpose even today. For civilian purposes, they are used to reweld broken locomotive axles that cannot be easily removed for repair. They are used to weld railroad tracks together. Thermite reactions can also be used to separate thin pieces of metal if, for whatever reason, a torch doesn’t work.

Thermite reactions are also used for military purposes. Thermite mixtures are frequently used with additional components as incendiary devices—devices that start fires. Thermite reactions are also useful in disabling enemy weapons: a piece of artillery doesn’t work so well when it has a hole melted into its barrel because of a thermite reaction!

Key Takeaway

The energy change of a chemical reaction can be used in stoichiometry calculations.

Exercises

Write the equivalences that this balanced thermochemical equation implies.

PCl3(g) + Cl2(g) → PCl5(g) ΔH = −87.9 kJ

Write the equivalences that this balanced thermochemical equation implies.

2 SO3(g) → 2 SO2(g) + O2(g) ΔH = 197.9 kJ

How many kilojoules are given off when 17.8 mol of CH4(g) react?

CH4(g) + 2 O2(g) → CO2(g) + 2 H2O(ℓ) ΔH = −890.1 kJ

How many kilojoules are absorbed when 0.772 mol of N2(g) reacts?

N2(g) + 2 NO(g) → 2 N2O(g) ΔH = 73.8 kJ

How many kilojoules are absorbed when 23.09 mol of C6H6(ℓ) are formed?

6 C(s) + 3 H2(g) → C6H6(ℓ) ΔH = 49.0 kJ

How many kilojoules are given off when 8.32 mol of Mg react?

2 Mg(s) + O2(g) → 2 MgO(s) ΔH = −1,213 kJ

Glucose is the main fuel metabolized in animal cells:

C6H12O6 + 6 O2 → 6 CO2 + 6 H2O ΔH = −2,799 kJ

How much energy is given off when 100.0 g of C6H12O6 react?

Given the thermochemical equation

2 Al(s) + Fe2O3(s) → Al2O3(s) + 2 Fe(s) ΔH = −850.2 kJ

how much energy is given off when 288 g of Fe are produced?

Given the thermochemical equation

2 CO2(g) → 2 CO(g) + O2(g) ΔH = 566 kJ

how much energy is absorbed when 85.2 g of CO2 are reacted?

Given the thermochemical equation

2 Na+(aq) + SO42−(aq) → Na2SO4(s) ΔH = 819.8 kJ

how much energy is absorbed when 55.9 g of Na+(aq) are reacted?

NaHCO3 decomposes when exposed to heat:

2 NaHCO3(s) → Na2CO3(s) + CO2(g) + H2O(ℓ) ΔH = 91.5 kJ

What mass of NaHCO3 is decomposed by 256 kJ?

HgO decomposes when exposed to heat:

2 HgO(s) → 2 Hg(ℓ) + O2(g) ΔH = 181.6 kJ

What mass of O2 can be made with 100.0 kJ?

For the thermochemical equation

Fe2O3(s) + 3 SO3(g) → Fe2(SO4)3 (s) ΔH = −570.2 kJ

what mass of SO3 is needed to generate 1,566 kJ?

For the thermochemical equation

H2(g) + Br2(ℓ) → 2 HBr(g) ΔH = −72.6 kJ

what mass of HBr will be formed when 553 kJ of energy are given off?

Answers

1.

1 mol of PCl3 ⇔ 1 mol of Cl2 ⇔ 1 mol of PCl5 ⇔ −87.9 kJ

3.

15,800 kJ

5.

1,130 kJ

7.

1,554 kJ

9.

548 kJ

11.

470 g

13.

6.60 × 102 g

Chapter 56

8.5 Hess’s Law

Learning Objective

Learn how to combine chemical equations and their enthalpy changes.

Now that we understand that chemical reactions occur with a simultaneous change in energy, we can apply the concept more broadly. To start, remember that some chemical reactions are rather difficult to perform. For example, consider the combustion of carbon to make carbon monoxide:

2 C(s) + O2(g) → 2 CO(g) ΔH = ?

In reality, this is extremely difficult to do; given the opportunity, carbon will react to make another compound, carbon dioxide:

C(s) + O2(g) → CO2(g) ΔH = −393.5 kJ

Is there a way around this? Yes. It comes from the understanding that chemical equations can be treated like algebraic equations, with the arrow acting like the equals sign. Like algebraic equations, chemical equations can be combined, and if the same substance appears on both sides of the arrow, it can be canceled out (much like a spectator ion in ionic equations). For example, consider these two reactions:

2 C(s) + 2 O2(g) → 2 CO2(g)
2 CO2(g) → 2 CO(g) + O2(g)

If we added these two equations by combining all the reactants together and all the products together, we would get

2 C(s) + 2 O2(g) + 2 CO2(g) → 2 CO2(g) + 2 CO(g) + O2(g)

We note that 2 CO2(g) appears on both sides of the arrow, so they cancel:

We also note that there are 2 mol of O2 on the reactant side, and 1 mol of O2 on the product side. We can cancel 1 mol of O2 from both sides:

What do we have left?

2 C(s) + O2(g) → 2 CO(g)

This is the reaction we are looking for! So by algebraically combining chemical equations, we can generate new chemical equations that may not be feasible to perform.

What about the enthalpy changes? Hess’s law states that when chemical equations are combined algebraically, their enthalpies can be combined in exactly the same way. Two corollaries immediately present themselves:

If a chemical reaction is reversed, the sign on ΔH is changed.

If a multiple of a chemical reaction is taken, the same multiple of the ΔH is taken as well.

What are the equations being combined? The first chemical equation is the combustion of C, which produces CO2:

2 C(s) + 2 O2(g) → 2 CO2(g)

This reaction is two times the reaction to make CO2 from C(s) and O2(g), whose enthalpy change is known:

C(s) + O2(g) → CO2(g) ΔH = −393.5 kJ

According to the first corollary, the first reaction has an energy change of two times −393.5 kJ, or −787.0 kJ:

2 C(s) + 2 O2(g) → 2 CO2(g) ΔH = −787.0 kJ

The second reaction in the combination is related to the combustion of CO(g):

2 CO(g) + O2(g) → 2 CO2(g) ΔH = −566.0 kJ

The second reaction in our combination is the reverse of the combustion of CO. When we reverse the reaction, we change the sign on the ΔH:

2 CO2(g) → 2 CO(g) + O2(g) ΔH = +566.0 kJ

Now that we have identified the enthalpy changes of the two component chemical equations, we can combine the ΔH values and add them:

Hess’s law is very powerful. It allows us to combine equations to generate new chemical reactions whose enthalpy changes can be calculated, rather than directly measured.

Example 10 Determine the enthalpy change of C2H4 + 3 O2 → 2 CO2 + 2 H2O ΔH = ? from these reactions: C2H2 + H2 → C2H4 ΔH = −174.5 kJ
2 C2H2 + 5 O2 → 4 CO2 + 2 H2O ΔH = −1,692.2 kJ
2 CO2 + H2 → 2 O2 + C2H2 ΔH = −167.5 kJ Solution We will start by writing chemical reactions that put the correct number of moles of the correct substance on the proper side. For example, our desired reaction has C2H4 as a reactant, and only one reaction from our data has C2H4. However, it has C2H4 as a product. To make it a reactant, we need to reverse the reaction, changing the sign on the ΔH: C2H4 → C2H2 + H2 ΔH = +174.5 kJ We need CO2 and H2O as products. The second reaction has them on the proper side, so let us include one of these reactions (with the hope that the coefficients will work out when all our reactions are added): 2 C2H2 + 5 O2 → 4 CO2 + 2 H2O ΔH = −1,692.2 kJ We note that we now have 4 mol of CO2 as products; we need to get rid of 2 mol of CO2. The last reaction has 2CO2 as a reactant. Let us use it as written: 2 CO2 + H2 → 2 O2 + C2H2 ΔH = −167.5 kJ We combine these three reactions, modified as stated: What cancels? 2 C2H2, H2, 2 O2, and 2 CO2. What is left is C2H4 + 3 O2 → 2 CO2 + 2H2O which is the reaction we are looking for. The ΔH of this reaction is the sum of the three ΔH values: ΔH = +174.5 − 1,692.2 − 167.5 = −1,685.2 kJ Test Yourself Given the thermochemical equations Pb + Cl2 → PbCl2 ΔH = −223 kJ
PbCl2 + Cl2 → PbCl4 ΔH = −87 kJ determine ΔH for Pb + 2 Cl2 → PbCl4 Answer +136 kJ

Key Takeaway

Hess’s law allows us to combine reactions algebraically and then combine their enthalpy changes the same way.

Exercises

Define Hess’s law.

What does Hess’s law require us to do to the ΔH of a thermochemical equation if we reverse the equation?

If the ΔH for

C2H4 + H2 → C2H6

is −65.6 kJ, what is the ΔH for this reaction?

C2H6 → C2H4 + H2

If the ΔH for

2 Na + Cl2 → 2NaCl

is −772 kJ, what is the ΔH for this reaction:

2 NaCl → 2 Na + Cl2

If the ΔH for

C2H4 + H2 → C2H6

is −65.6 kJ, what is the ΔH for this reaction?

2 C2H4 + 2 H2 → 2 C2H6

If the ΔH for

2 C2H6 + 7 O2 → 4 CO2 + 6 H2O

is −2,650 kJ, what is the ΔH for this reaction?

6 C2H6 + 21 O2 → 12 CO2 + 18 H2O

The ΔH for

C2H4 + H2O → C2H5OH

is −44 kJ. What is the ΔH for this reaction?

2 C2H5OH → 2 C2H4 + 2 H2O

The ΔH for

N2 + O2 → 2 NO

is 181 kJ. What is the ΔH for this reaction?

NO → 1/2 N2 + 1/2 O2

Determine the ΔH for the reaction

Cu + Cl2 → CuCl2

given these data:

2 Cu + Cl2 → 2 CuCl ΔH = −274 kJ
2 CuCl + Cl2 → 2 CuCl2 ΔH = −166 kJ

Determine ΔH for the reaction

2 CH4 → 2 H2 + C2H4

given these data:

CH4 + 2 O2 → CO2 + 2 H2O ΔH = −891 kJ
C2H4 + 3 O2 → 2 CO2 + 2 H2O ΔH = −1,411 kJ
2 H2 + O2 → 2 H2O ΔH = −571 kJ

Determine ΔH for the reaction

Fe2(SO4)3 → Fe2O3 + 3SO3

given these data:

4 Fe + 3O2 → 2 Fe2O3 ΔH = −1,650 kJ
2 S + 3 O2 → 2 SO3 ΔH = −792 kJ
2 Fe + 3 S + 6 O2 → Fe2(SO4)3 ΔH = −2,583 kJ

Determine ΔH for the reaction

CaCO3 → CaO + CO2

given these data:

2 Ca + 2 C + 3 O2 → 2 CaCO3 ΔH = −2,414 kJ
C + O2 → CO2 ΔH = −393.5 kJ
2 Ca + O2 → 2 CaO ΔH = −1,270 kJ

Answers

1.

If chemical equations are combined, their energy changes are also combined.

3.

ΔH = 65.6 kJ

5.

ΔH = −131.2 kJ

7.

ΔH = 88 kJ

9.

ΔH = −220 kJ

11.

ΔH = 570 kJ

Chapter 57

8.6 Formation Reactions

Learning Objectives

Define a formation reaction and be able to recognize one.

Use enthalpies of formation to determine the enthalpy of reaction.

Hess’s law allows us to construct new chemical reactions and predict what their enthalpies of reaction will be. This is a very useful tool because now we don’t have to measure the enthalpy changes of every possible reaction. We need measure only the enthalpy changes of certain benchmark reactions and then use these reactions to algebraically construct any possible reaction and combine the enthalpies of the benchmark reactions accordingly.

But what are the benchmark reactions? We need to have some agreed-on sets of reactions that provide the central data for any thermochemical equation.

Formation reactions are chemical reactions that form one mole of a substance from its constituent elements in their standard states. By standard states we mean as a diatomic molecule if that is how the element exists and the proper phase at normal temperatures (typically room temperature). The product is one mole of substance, which may require that coefficients on the reactant side be fractional (a change from our normal insistence that all coefficients be whole numbers). For example, the formation reaction for methane (CH4) is

C(s) + 2 H2(g) → CH4(g)

The formation reaction for carbon dioxide (CO2) is

C(s) + O2(g) → CO2(g)

In both cases, one of the elements is a diatomic molecule because that is the standard state for that particular element. The formation reaction for H2O—

2 H2(g) + O2(g) → 2 H2O(ℓ)

—is not in a standard state because the coefficient on the product is 2; for a proper formation reaction, only one mole of product is formed. Thus, we have to divide all coefficients by 2:

H2(g) + 1/2 O2(g) → H2O(ℓ)

On a molecular scale, we are using half of an oxygen molecule, which may be problematic to visualize. However, on a molar level, it implies that we are reacting only half of a mole of oxygen molecules, which should be an easy concept for us to understand.

Example 11 Which of the following are proper formation reactions? H2(g) + Cl2(g) → 2 HCl(g) Si(s) + 2 F2(g) → SiF4(g) CaO(s) + CO2 → CaCO3(s) Solution In this reaction, two moles of product are produced, so this is not a proper formation reaction. In this reaction, one mole of a substance is produced from its elements in their standard states, so this is a proper formation reaction. One mole of a substance is produced, but it is produced from two other compounds, not its elements. So this is not a proper formation reaction. Test Yourself Is this a proper formation reaction? Explain why or why not. 2 Fe(s) + 3 P(s) + 12 O(g) → Fe2(PO4)3(s) Answer This is not a proper formation reaction because oxygen is not written as a diatomic molecule.

Given the formula of any substance, you should be able to write the proper formation reaction for that substance.

Example 12 Write formation reactions for each of the following. FeO(s) C2H6(g) Solution In both cases, there is one mole of the substance as product, and the coefficients of the reactants may have to be fractional to balance the reaction. Fe(s) + 1/2 O2(g) → FeO(s) 2 C(s) + 3 H2(g) → C2H6(g) Test Yourself Write the equation for the formation of CaCO3(s). Answer Ca(s) + C(s) + 3/2 O2(g) → CaCO3(s)

The enthalpy change for a formation reaction is called the enthalpy of formation The subscript f is the clue that the reaction of interest is a formation reaction. Thus, for the formation of FeO(s), Note that now we are using kJ/mol as the unit because it is understood that the enthalpy change is for one mole of substance. Note, too, by definition, that the enthalpy of formation of an element is exactly zero because making an element from an element is no change. For example,

H2(g) → H2(g) ΔHf = 0

Formation reactions and their enthalpies are important because these are the thermochemical data that are tabulated for any chemical reaction. Table 8.2 “Enthalpies of Formation for Various Substances” lists some enthalpies of formation for a variety of substances; in some cases, however, phases can be important (e.g., for H2O).

It is easy to show that any general chemical equation can be written in terms of the formation reactions of its reactants and products, some of them reversed (which means the sign must change in accordance with Hess’s law). For example, consider

2 NO2(g) → N2O4(g)

We can write it in terms of the (reverse) formation reaction of NO2 and the formation reaction of N2O4:

We must multiply the first reaction by 2 to get the correct overall balanced equation. We are simply using Hess’s law in combining the ΔHf values of the formation reactions.

Table 8.2 Enthalpies of Formation for Various Substances

Compound	Δ Hf (kJ/mol)	Compound	Δ Hf (kJ/mol)	Compound	Δ Hf (kJ/mol)	Compound	Δ Hf (kJ/mol)
Ag(s)	0	Ca(s)	0	Hg 2 Cl 2 (s)	−265.37	NaHCO 3 (s)	−950.81
AgBr(s)	−100.37	CaCl 2 (s)	−795.80	I 2 (s)	0	NaN 3 (s)	21.71
AgCl(s)	−127.01	CaCO 3 (s, arag)	−1,207.1	K(s)	0	Na 2 CO 3 (s)	−1,130.77
Al(s)	0	CaCO 3 (s, calc)	−1,206.9	KBr(s)	−393.8	Na 2 O(s)	−417.98
Al 2 O 3 (s)	−1,675.7	Cl 2 (g)	0	KCl(s)	−436.5	Na 2 SO 4 (s)	−331.64
Ar(g)	0	Cr(s)	0	KF(s)	−567.3	Ne(g)	0
Au(s)	0	Cr 2 O 3 (s)	−1,134.70	KI(s)	−327.9	Ni(s)	0
BaSO 4 (s)	−1,473.19	Cs(s)	0	Li(s)	0	O 2 (g)	0
Br 2 (ℓ)	0	Cu(s)	0	LiBr(s)	−351.2	O 3 (g)	142.67
C(s, dia)	1.897	F 2 (g)	0	LiCl(s)	−408.27	PH 3 (g)	22.89
C(s, gra)	0	Fe(s)	0	LiF(s)	−616.0	Pb(s)	0
CCl 4 (ℓ)	−128.4	Fe 2 (SO 4 ) 3 (s)	−2,583.00	LiI(s)	−270.4	PbCl 2 (s)	−359.41
CH 2 O(g)	−115.90	Fe 2 O 3 (s)	−825.5	Mg(s)	0	PbO 2 (s)	−274.47
CH 3 COOH(ℓ)	−483.52	Ga(s)	0	MgO(s)	−601.60	PbSO 4 (s)	−919.97
CH 3 OH(ℓ)	−238.4	HBr(g)	−36.29	NH 3 (g)	−45.94	Pt(s)	0
CH 4 (g)	−74.87	HCl(g)	−92.31	NO(g)	90.29	S(s)	0
CO(g)	−110.5	HF(g)	−273.30	NO 2 (g)	33.10	SO 2 (g)	−296.81
CO 2 (g)	−393.51	HI(g)	26.5	N 2 (g)	0	SO 3 (g)	−395.77
C 2 H 5 OH(ℓ)	−277.0	HNO 2 (g)	−76.73	N 2 O(g)	82.05	SO 3 (ℓ)	−438
C 2 H 6 (g)	−83.8	HNO 3 (g)	−134.31	N 2 O 4 (g)	9.08	Si(s)	0
C 6 H 12 (ℓ)	−157.7	H 2 (g)	0	N 2 O 5 (g)	11.30	U(s)	0
C 6 H 12 O 6 (s)	−1277	H 2 O(g)	−241.8	Na(s)	0	UF 6 (s)	−2,197.0
C 6 H 14 (ℓ)	−198.7	H 2 O(ℓ)	−285.83	NaBr(s)	−361.1	UO 2 (s)	−1,085.0
C 6 H 5 CH 3 (ℓ)	12.0	H 2 O(s)	−292.72	NaCl(s)	−385.9	Xe(g)	0
C 6 H 6 (ℓ)	48.95	He(g)	0	NaF(s)	−576.6	Zn(s)	0
C 10 H 8 (s)	77.0	Hg(ℓ)	0	NaI(s)	−287.8	ZnCl 2 (s)	−415.05
C 12 H 22 O 11 (s)	−2,221.2

Sources: National Institute of Standards and Technology’s Chemistry WebBook, http://webbook.nist.gov/chemistry; D. R. Lide, ed., CRC Handbook of Chemistry and Physics, 89th ed. (Boca Raton, FL: CRC Press, 2008); J. A. Dean, ed., Lange’s Handbook of Chemistry, 14th ed. (New York: McGraw-Hill, 1992).

Example 13 Show that the reaction Fe2O3(s) + 3 SO3(g) → Fe2(SO4)3(s) can be written as a combination of formation reactions. Solution There will be three formation reactions. The one for the products will be written as a formation reaction, while the ones for the reactants will be written in reverse. Furthermore, the formation reaction for SO3 will be multiplied by 3 because there are three moles of SO3 in the balanced chemical equation. The formation reactions are as follows:
2 Fe(s) + 3 S(s) + 6 O2(g) → Fe2(SO4)3(s) When these three equations are combined and simplified, the overall reaction is Fe2O3(s) + 3 SO3(s) → Fe2(SO4)3(s) Test Yourself Write the formation reactions that will yield 2 SO2(g) + O2(g) → 2 SO3(g). Answer

Now that we have established formation reactions as the major type of thermochemical reaction we will be interested in, do we always need to write all the formation reactions when we want to determine the enthalpy change of any random chemical reaction? No. There is an easier way. You may have noticed in all our examples that we change the signs on all the enthalpies of formation of the reactants, and we don’t change the signs on the enthalpies of formation of the products. We also multiply the enthalpies of formation of any substance by its coefficient—technically, even when it is just 1. This allows us to make the following statement: the enthalpy change of any chemical reaction is equal to the sum of the enthalpies of formation of the products minus the sum of the enthalpies of formation of the reactants. In mathematical terms,

where np and nr are the number of moles of products and reactants, respectively (even if they are just 1 mol), and ΔHf,p and ΔHf,r are the enthalpies of formation of the product and reactant species, respectively. This products-minus-reactants scheme is very useful in determining the enthalpy change of any chemical reaction, if the enthalpy of formation data are available. Because the mol units cancel when multiplying the amount by the enthalpy of formation, the enthalpy change of the chemical reaction has units of energy (joules or kilojoules) only.

Example 14 Use the products-minus-reactants approach to determine the enthalpy of reaction for Solution The enthalpies of formation are multiplied by the number of moles of each substance in the chemical equation, and the total enthalpy of formation for reactants is subtracted from the total enthalpy of formation of the products: ΔHrxn=[(2 mol)(−92.3 kJ/ mol)+(1 mol)(0 kJ/ mol)]−[(2 mol)(−36.3 kJ/ mol)+(1 mol)(0 kJ/ mol)] All the mol units cancel. Multiplying and combining all the values, we get ΔHrxn = −112.0 kJ Test Yourself What is the enthalpy of reaction for this chemical equation? Answer +2.8 kJ

Food and Drink App: Calories and Nutrition

Section 8.1 “Energy” mentioned the connection between the calorie unit and nutrition: the calorie is the common unit of energy used in nutrition, but we really consider the kilocalorie (spelled Calorie with a capital C). A daily diet of 2,000 Cal is actually 2,000,000 cal, or over 8,000,000 J, of energy.

Nutritionists typically generalize the Calorie content of foods by separating it into the three main food types: proteins, carbohydrates, and fats. The general rule of thumb is as follows:

If the food is	It has this energy content
protein	4 Cal/g
carbohydrate	4 Cal/g
fat	9 Cal/g

This table is very useful. Assuming a 2,000 Cal daily diet, if our diet consists solely of proteins and carbohydrates, we need only about 500 g of food for sustenance—a little more than a pound. If our diet consists solely of fats, we need only about 220 g of food—less than a half pound. Of course, most of us have a mixture of proteins, carbohydrates, and fats in our diets. Water has no caloric value in the diet, so any water in the diet is calorically useless. (However, it is important for hydration; also, many forms of water in our diet are highly flavoured and sweetened, which bring other nutritional issues to bear.)

When your body works, it uses calories provided by the diet as its energy source. If we eat more calories than our body uses, we gain weight—about 1 lb of weight for every additional 3,500 Cal we ingest. Similarly, if we want to lose weight, we need to expend an extra 3,500 Cal than we ingest to lose 1 lb of weight. No fancy or fad diets are needed; maintaining an ideal body weight is a straightforward matter of thermochemistry—pure and simple.

Key Takeaways

A formation reaction is the formation of one mole of a substance from its constituent elements.

Enthalpies of formation are used to determine the enthalpy change of any given reaction.

Exercises

Define formation reaction and give an example.

Explain the importance of formation reactions in thermochemical equations.

Which of the following reactions is a formation reaction? If it is not a formation reaction, explain why.

a) H2(g) + S(s) → H2S(g)

b) 2 HBr(g) + Cl2(g) → 2 HCl(g) + Br2(ℓ)

4. Which of the following reactions is a formation reaction? If it is not a formation reaction, explain why.

a) Fe(g) + 1/2 O2(g) → FeO(s)

b) Hg(ℓ) + 1/2 O2(g) → HgO(s)

5. Which of the following reactions is a formation reaction? If it is not a formation reaction, explain why.

a) H2(g) + S(s) + 2 O2(g) → H2SO4(ℓ)

b) C3H8(g) + 5 O2(g) → 3 CO2(g) + 4 H2O(ℓ)

6. Which of the following reactions is a formation reaction? If it is not a formation reaction, explain why.

a) Zn(s) + 2 HCl(aq) → ZnCl2(aq) + H2(g)

b) 2 Na(s) + C(s) + 3/2 O2(g) → Na2CO3(s)

7. Write a proper formation reaction for each substance.

a) H3PO4(s)

b) Na2O(s)

c) C3H7OH(ℓ)

8. Write a proper formation reaction for each substance.

a) N2O5(g)

b) BaSO4(s)

c) Fe(OH)3(s)

9. Write a proper formation reaction for each substance.

a) C12H22O11(s)

b) Zn(NO3)2(s)

c) Al(OH)3(s)

10. Write a proper formation reaction for each substance.

a) O3(g)

b) Na2O2(s)

c) PCl5(g)

11. Write this reaction in terms of formation reactions.

MgCO3(s) → MgO(s) + CO2(g)

12. Write this reaction in terms of formation reactions.

2 NO + 4 NO2 → 2 N2O5 + N2

13. Write this reaction in terms of formation reactions.

2 CuCl(s) → Cu(s) + CuCl2(s)

14. Write this reaction in terms of formation reactions.

SiH4 + 4 F2 → SiF4 + 4 HF

15. Determine the enthalpy change of this reaction. Data can be found in Table 8.2 “Enthalpies of Formation for Various Substances”.

CH2O(g) + O2 → CO2(g) + H2O(ℓ)

16. Determine the enthalpy change of this reaction. Data can be found in Table 8.2 “Enthalpies of Formation for Various Substances”.

2 AgBr(s) + Cl2(g) → 2 AgCl(s) + Br2(ℓ)

17. Determine the enthalpy change of this reaction. Data can be found in Table 8.2 “Enthalpies of Formation for Various Substances”.

Mg(s) + N2O5(g) → MgO(s) + 2NO2(g)

18. Determine the enthalpy change of this reaction. Data can be found in Table 782 “Enthalpies of Formation for Various Substances”.

2C6H6(ℓ) + 15O2(g) → 12CO2(g) + 6H2O(ℓ)

Answers

1.

A formation reaction is a reaction that produces one mole of a substance from its elements. Example: C(s) + O2(g) → CO2(g)

3.

a) formation reaction

b) It is not the formation of a single substance, so it is not a formation reaction.

5.

a) formation reaction

b) It is not the formation of a single substance, so it is not a formation reaction.

7.

a) 3/2 H2(g) + P(s) + 2 O2(g) → H3PO4(s)

b) 2 Na(s) + 1/2 O2(g) → Na2O(s)

c) 3 C(s) + 1/2 O2(g) + 4 H2(g) → C3H7OH(ℓ)

9.

a) 12 C(s) + 11 H2(g) + 11/2 O2(g) → C12H22O11(s)

b) Zn(s) + N2(g) + 3 O2(g) → Zn(NO3)2

c) Al(s) + 3/2 O2(g) + 3/2 H2(g) → Al(OH)3(s)

11.

a) MgCO3(s) → Mg(s) + C(s) + 3/2 O2(g)

b) Mg(s) + 1/2 O2(g) → MgO(s)

c) C(s) + O2(g) → CO2(g)

13.

a) 2 × [CuCl(s) → Cu(s) + 1/2 Cl2(g)]

b) Cu(s) → Cu(s)

c) Cu(s) + Cl2(g) → CuCl2(s)

15.

ΔH = −563.44 kJ

17.

ΔH = −546.7 kJ

Chapter 58

8.9 End-of-Chapter Material

Additional Exercises

What is the work when 124 mL of gas contract to 72.0 mL under an external pressure of 822 torr?

What is the work when 2,345 mL of gas contract to 887 mL under an external pressure of 348 torr?

A 3.77 L volume of gas is exposed to an external pressure of 1.67 atm. As the gas contracts, 156 J of work are added to the gas. What is the final volume of the gas?

A 457 mL volume of gas contracts when 773 torr of external pressure act on it. If 27.4 J of work are added to the gas, what is its final volume?

What is the heat when 1,744 g of Hg increase in temperature by 334°C? Express your final answer in kJ.

What is the heat when 13.66 kg of Fe cool by 622°C? Express your final answer in kJ.

What is final temperature when a 45.6 g sample of Al at 87.3°C gains 188 J of heat?

What is final temperature when 967 g of Au at 557°C lose 559 J of heat?

Plants take CO2 and H2O and make glucose (C6H12O6) and O2. Write a balanced thermochemical equation for this process. Use data in Table 782 “Enthalpies of Formation for Various Substances”.

Exercise 9 described the formation of glucose in plants, which take in CO2 and H2O and give off O2. Is this process exothermic or endothermic? If exothermic, where does the energy go? If endothermic, where does the energy come from?

The basic reaction in the refining of aluminum is to take Al2O3(s) and turn it into Al(s) and O2(g). Write the balanced thermochemical equation for this process. Use data in Table 8.2 “Enthalpies of Formation for Various Substances”.

Is the enthalpy change of the reaction

H2O(ℓ) → H2O(g)

zero or nonzero? Use data in Table 8.2 “Enthalpies of Formation for Various Substances” to determine the answer.

What mass of H2O can be heated from 22°C to 80°C in the combustion of 1 mol of CH4? You will need the balanced thermochemical equation for the combustion of CH4. Use data in Table 8.2 “Enthalpies of Formation for Various Substances”.

What mass of H2O can be heated from 22°C to 80°C in the combustion of 1 mol of C2H6? You will need the balanced thermochemical equation for the combustion of C2H6. Use data in Table 8.2 “Enthalpies of Formation for Various Substances”. Compare your answer to Exercise 13.

What is the enthalpy change for the unknown reaction?

Pb(s) + Cl2(g) → PbCl2(s) ΔH = −359 kJ
PbCl2(s) + Cl2(g) → PbCl4(ℓ) ΔH = ?
Pb(s) + 2 Cl2(g) → PbCl4(ℓ) ΔH = −329 kJ

What is the enthalpy change for the unknown reaction?

P(s) + 3/2 Br2(ℓ) → PBr3(ℓ) ΔH = −185 kJ
PI3(s) → P(s) + 3/2 I2(s) ΔH = ?
PI3(s) + 3/2 Br2(ℓ) → PBr3(ℓ) + 3/2 I2(s) ΔH = −139 kJ

What is the ΔH for this reaction? The label gra means graphite, and the label dia means diamond. What does your answer mean?

C(s, gra) → C(s, dia)

Without consulting any tables, determine the ΔH for this reaction. Explain your answer.

H2O(ℓ, 25°C) → H2O(ℓ, 25°C)

Answers

1.

5.70 J

3.

4.69 L

5.

80.97 kJ

7.

91.9°C

9.

6 CO2(g) + 6 H2O(ℓ) → C6H12O6(s) + 6 O2(g) ΔH = 2,799 kJ

11.

2 Al2O3(s) → 4 Al(s) + 3 O2(g) ΔH = 3351.4 kJ

13.

3,668 g

15.

ΔH = 30 kJ

17.

ΔH = 1.897 kJ; the reaction is endothermic.

Chapter 59

Chapter 9. Chemical Thermodynamics

Introduction to Chemical Thermodynamics

You have previously learned about energy and its relationship to chemical processes (enthalpy). There are some processes that require the input of heat (endothermic) while others release heat (exothermic), but how do we know if any of these processes will proceed under certain conditions? Enthalpy is only part of the answer, so we must delve further into chemical thermodynamics.

In this chapter, we will examine the concept of spontaneity: whether a process will occur without external influences. As well, we will focus on the thermodynamic state function known as entropy, a measure of “randomness” or the amount of energy dispersal in molecules. Finally, we will discuss Gibbs free energy, a thermodynamic quantity used to predict spontaneity, which incorporates both enthalpy and entropy.

Chapter 60

9.1 Spontaneous Change

Learning Objectives

Gain an understanding of what is meant by the term spontaneous.

Generally speaking, a spontaneous process is one that occurs without the influence of external forces. A common example that is used to portray the difference between a spontaneous and nonspontaneous processes is the dropping of a breakable object like a beaker. The beaker will fall and break unless outside forces are used to stop it. However, the opposite process, a broken beaker being reformed into its original condition and defying gravity to lift into the air, is nonspontaneous. The beaker cannot simply reform and lift into the air on its own, it requires a skilled glassworker to fix a broken beaker and someone to lift it in the air.

Chemically, when we use the term spontaneous, we are referring to any change that moves a system toward equilibrium. The term spontaneous does not imply anything about the speed or rate; this is the domain of kinetics. Spontaneity simply provides information on the direction of a reaction.

Key Takeaways

A spontaneous reaction or process is one that moves a system toward equilibrium.

Chapter 61

9.2 Entropy and the Second Law of Thermodynamics

Learning Objectives

To gain an understanding of the term entropy.

To gain an understanding of the Boltzmann equation and the term microstates.

To be able to estimate change in entropy qualitatively.

To assess the spontaneity of a process we must use a thermodynamic quantity known as entropy (S). The second law of thermodynamics states that a spontaneous process will increase the entropy of the universe. But what exactly is entropy? Entropy is typically defined as either the level of randomness (or disorder) of a system or a measure of the energy dispersal of the molecules in the system. These definitions can seem a bit vague or unclear when you are first learning thermodynamics, but we will try to clear this up in the following subsections.

The Molecular Interpretation of Entropy

Consider the following system, where two flasks are sealed together and connected by a stopcock (Figure 9.1 “Two-Atom, Double-Flask Diagram”). In this system, we have placed two atoms of gas, one green and one blue. At first, both atoms are contained in only the left flask. When the stopcock is opened, both atoms are free to move around randomly in both flasks. If we were to take snapshots over time, we would see that these atoms can have four possible arrangements. The likelihood of all atoms being found in their original flask, in this case, is only 1 in 4. If we increased the number of atoms, we would see that the probability of finding all of the atoms in the original flask would decrease dramatically following (1/2)n, where n is the number of atoms.

Thus we can say that it is entropically favoured for the gas to spontaneously expand and distribute between the two flasks, because the resulting increase in the number of possible arrangements is an increase in the randomness/disorder of the system.

. When the stopcock is opened between the flasks, the two atoms can distribute in four possible ways.

The Boltzmann equation

Figure 9.2. Ludwig Boltzmann.

Boltzmann age31\Public Domain

Ludwig Boltzmann (1844–1906) pioneered the concept that entropy could be calculated by examining the positions and energies of molecules. He developed an equation, known as the Boltzmann equation, which relates entropy to the number of microstates (W):

S = k ln W

where k is the Boltzmann constant (1.38 x 10-23 J/K), and W is the number of microstates.

Microstates is a term used to describe the number of different possible arrangements of molecular position and kinetic energy at a particular thermodynamic state. A process that gives an increase in the number of microstates therefore increases the entropy.

Qualitative Estimates of Entropy Change

We can estimate changes in entropy qualitatively for some simple processes using the definition of entropy discussed earlier and incorporating Boltzmann’s concept of microstates.

As a substance is heated, it gains kinetic energy, resulting in increased molecular motion and a broader distribution of molecular speeds. This increases the number of microstates possible for the system. Increasing the number of molecules in a system also increases the number of microstates, as now there are more possible arrangements of the molecules. As well, increasing the volume of a substance increases the number of positions where each molecule could be, which increases the number of microstates. Therefore, any change that results in a higher temperature, more molecules, or a larger volume yields an increase in entropy.

Key Takeaways

Entropy is the level of randomness (or disorder) of a system. It could also be thought of as a measure of the energy dispersal of the molecules in the system.

Microstates are the number of different possible arrangements of molecular position and kinetic energy at a particular thermodynamic state.

Any change that results in a higher temperature, more molecules, or a larger volume yields an increase in entropy.

Chapter 62

9.3 Measuring Entropy and Entropy Changes

Learning Objectives

To gain an understanding of methods of measuring entropy and entropy change.

As the temperature of a sample decreases, its kinetic energy decreases and, correspondingly, the number of microstates possible decreases. The third law of thermodynamics states: at absolute zero (0 K), the entropy of a pure, perfect crystal is zero. In other words, at absolute zero, there is only one microstate and according to Boltzmann’s equation:

S = k ln W = k ln 1 = 0

Using this as a reference point, the entropy of a substance can be obtained by measuring the heat required to raise the temperature a given amount, using a reversible process. Reversible heating requires very slow and very small increases in heat.

ΔS =

Example 1 Determine the change in entropy (in J/K) of water when 425 kJ of heat is applied to it at 50oC. Assume the change is reversible and the temperature remains constant. Solution ΔS = = = = 1.32 x J/K

Standard Molar Entropy, So

The standard molar entropy, So, is the entropy of 1 mole of a substance in its standard state, at 1 atm of pressure. These values have been tabulated, and selected substances are listed in Table 9.1 “Standard Molar Entropies of Selected Substances at 298 K.”5

Table 9.1. Standard Molar Entropies of Selected Substances at 298 K

Several trends emerge from standard molar entropy data:

Larger, more complex molecules have higher standard molar entropy values than smaller or simpler molecules. There are more possible arrangements of atoms in space for larger, more complex molecules, increasing the number of possible microstates.

Gases tend to have much larger standard molar entropies than liquids, and liquids tend to have larger values than solids, when comparing the same or similar substances.

The standard molar entropy of any substance increases as the temperature increases. This can be seen in Figure 9.3 “Entropy vs. Temperature of a Single Substance.” Large jumps in entropy occur at the phase changes: solid to liquid and liquid to gas. These large increases occur due to sudden increased molecular mobility and larger available volumes associated with the phase changes.

Figure 9.3. Entropy vs. Temperature of a Single Substance.

Credit: UC Davis ChemWiki by University of California\CC-BY-SA-3.0

Standard Entropy Change of a Reaction, ΔS⁰

The entropy change of a reaction where the reactants and products are in their standard state can be determined using the following equation:

ΔS⁰ = ∑nS⁰(products) – ∑mS⁰(reactants)

where n and m are the coefficients found in the balanced chemical equation of the reaction.

Example 2 Determine the change in the standard entropy, ΔS⁰, for the synthesis of carbon dioxide from graphite and oxygen: C(s) + O2(g) → CO2(g) Solution ΔS⁰ = ∑nS⁰(products) – ∑mS⁰(reactants) ΔS⁰ = (213.8 J/mol K) – (205.2 J/mol K + 5.7 J/mol K) ΔS⁰ = +2.9 J/mol K

Entropy Changes in the Surroundings

The second law of thermodynamics states that a spontaneous reaction will result in an increase of entropy in the universe. The universe comprises both the system being examined and its surroundings.

ΔSuniverse = ΔSsys + ΔSsurr

Standard entropy change can also be calculated by the following:

ΔS⁰universe = ΔS⁰sys + ΔS⁰surr

The change in entropy of the surroundings is essentially just a measure of how much energy is being taken in or given off by the system. Under isothermal conditions, we can express the entropy change of the surroundings as:

ΔSsurr = or ΔSsurr = (at constant pressure)

Example 3 For the previous example, the change in the standard entropy, ΔS⁰, for the synthesis of carbon dioxide from graphite and oxygen, use the previously calculated ΔS⁰sys and standard enthalpy of formation values to determine S⁰surr and ΔS⁰universe. Solution First we should solve for the ΔH⁰sys using the standard enthalpies of formation values: ΔH⁰sys = ΔH⁰f [CO2(g)] – ΔH⁰f [C(s) + O2(g)] ΔH⁰sys = (-393.5 kJ/mol) – (0 kJ/mol + 0 kJ/mol) ΔH⁰sys = -393.5 kJ/mol Now we can convert this to the ΔS⁰surr: ΔS⁰surr = = (-393.5 kJ/mol)/(298 K) = -1.32 kJ/mol K Finally, solve for ΔS⁰universe: ΔS⁰universe = ΔS⁰sys + ΔS⁰surr ΔS⁰universe = (+2.9 J/mol K) + (-1.32 x 103 J/mol K) ΔS⁰universe = -1.3 x 103 J/mol K

Key Takeaways

At absolute zero (0 K), the entropy of a pure, perfect crystal is zero.

The entropy of a substance can be obtained by measuring the heat required to raise the temperature a given amount, using a reversible process.

The standard molar entropy, So, is the entropy of 1 mole of a substance in its standard state, at 1 atm of pressure.

Chapter 63

9.4 Gibbs Free Energy

Learning Objectives

To gain an understanding of Gibbs free energy.

To understand the relationship between the sign of Gibbs free energy change and the spontaneity of a process.

To be able to determine Gibbs free energy using standard free energies of formation.

Figure 9.4. J. Willard Gibbs.

Willard/Public Domain

J. Willard Gibbs (1839-1903) proposed a single state function to determine spontaneity:

G = H – TS

where H is the enthalpy of the system, S is the entropy of the system, and G is Gibbs free energy.

The change in Gibbs free energy, ΔG, is the maximum amount of free energy available to do useful work. For an isothermal process, it can be expressed as:

ΔG = ΔH – TΔS or at standard conditions: ΔG⁰ = ΔH⁰ – TΔS⁰

This single term, Gibbs free energy (G), allows us to avoid calculating the entropy of the surroundings. It is really just a simplification of our previous method of estimating spontaneity:

ΔSuniverse = ΔSsys + ΔSsurr

$latex \Delta\textit{S}{}_{universe}$ = $latex \Delta \textit{S}{}_{sys}$ + ($latex \frac{{-{\rm \ }\Delta {\rm H}}_{sys}}{T}$ )

Multiply both sides of the equation by –T:

–TΔSuniverse= $latex \Delta\textit{S}{}_{sys}$ + ($latex \frac{{-{\rm \ }\Delta {\rm H}}_{sys}}{T}$ )

–TΔSuniverse = ΔHsys – TΔSsys

Therefore ΔG = –TΔSuniverse

As a result of this relationship, the sign of Gibbs free energy provides information on the spontaneity of a given reaction:

If ΔG > 0, the reaction is nonspontaneous in the direction written.

If ΔG = 0, the reaction is in a state of equilibrium.

If ΔG < 0, the reaction is spontaneous in the direction written.

The significance of the sign of a change in Gibbs free energy parallels the relationship of terms from the equilibrium chapter: the reaction quotient, Q, and the equilibrium constant, K.

If Q > K, the reaction is nonspontaneous in the direction written.

If Q = K, the reaction is in a state of equilibrium.

If Q < K, the reaction is spontaneous in the direction written.

Example 4 Calculate ΔG⁰ for a reaction where ΔH⁰ is equal to 36.2 kJ and ΔS⁰ is equal to 123 J/K at 298 K. Is this a spontaneous reaction? Solution ΔG⁰ = ΔH⁰ – TΔS⁰ ΔG⁰ = 36.2 kJ – (298 K x 123 J/K) ΔG⁰ = -0.4 kJ Therefore the reaction is spontaneous because ΔG⁰ is negative.

Determining ΔG⁰ from Standard Free Energy of Formation

The standard Gibbs free energy change, ΔG⁰, for a reaction can be calculated from the standard free energies of formation, ΔG⁰f .

ΔG⁰f = ∑nΔG⁰f(products) – ∑mΔG⁰f(reactants)

where n and m are the coefficients in the balanced chemical equation of the reaction.

Standard free energies of formation values are listed in the appendix, “Standard Thermodynamic Quantities for Chemical Substances at 25°C.”

Example 5 Calculate the standard free energy change for the following reaction, using standard free energies of formation: 5 C(s) + 2 SO2(g) → CS2(g) + 4 CO(g) Is this a spontaneous reaction? Solution ΔG⁰= ∑nΔG⁰f(products) – ∑mΔG⁰f(reactants) ΔG⁰ = [(4 x −137.2 kJ/mol) + (67.1 kJ/mol)] – [(5 x 0 kJ/mol) + (2 x −300.1 kJ/mol)] ΔG⁰= (-481.7 kJ/mol) – (-600.2 kJ/mol) ΔG⁰= 118.5 kJ/mol ΔG⁰ has a positive value so this is not a spontaneous process.

Key Takeaways

The change in Gibbs free energy (ΔG) is the maximum amount of free energy available to do useful work.

If ΔG > 0, the reaction is nonspontaneous in the direction written. If ΔG =0, the reaction is in a state of equilibrium. If ΔG < 0, the reaction is spontaneous in the direction written.

The standard Gibbs free energy change, ΔG⁰, for a reaction can be calculated from the standard free energies of formation, ΔG⁰f.

Chapter 64

9.5 Spontaneity: Free Energy and Temperature

Learning Objectives

To gain an understanding of the relationship between spontaneity, free energy, and temperature.

To be able to calculate the temperature at which a process is at equilibrium under standard conditions.

In the Gibbs free energy change equation, the only part we as scientists can control is the temperature. We have seen how we can calculate the standard change in Gibbs free energy, ΔG⁰, but not all reactions we are interested in occur at exactly 298 K. The temperature plays an important role in determining the Gibbs free energy and spontaneity of a reaction.

ΔG = ΔH – TΔS

If we examine the Gibbs free energy change equation, we can cluster the components to create two general terms, an enthalpy term, ΔH, and an entropy term, –TΔS. Depending on the sign and magnitude of each, the sum of these terms determines the sign of ΔG and therefore the spontaneity (Table 9.2 “Spontaneity and the Signs of Enthalpy and Entropy Terms”).

Since all temperature values are positive in the Kelvin scale, the temperature affects the magnitude of the entropy term. As shown in Table 9.2 “Spontaneity and the Signs of Enthalpy and Entropy Terms,” the temperature can be the deciding factor in spontaneity when the enthalpy and entropy terms have opposite signs. If ΔH is negative, and –TΔS positive, the reaction will be spontaneous at low temperatures (decreasing the magnitude of the entropy term). If ΔH is positive, and –TΔS negative, the reaction will be spontaneous at high temperatures (increasing the magnitude of the entropy term).

Sometimes it can be helpful to determine the temperature when ΔG⁰ = 0 and the process is at equilibrium. Knowing this value, we can adjust the temperature to drive the process to spontaneity or alternatively to prevent the process from occurring spontaneously. Remember that, at equilibrium:

ΔG⁰ = 0 = ΔH⁰- TΔS⁰

We can rearrange and solve for the temperature T:

TΔS⁰ =ΔH⁰

T =

Example 6 Using the appendix table of standard thermodynamic quantities, determine the temperature at which the following process is at equilibrium: CHCl3(ℓ) ⇌ CHCl3(g) How does the value you calculated compare to the boiling point of chloroform given in the literature? Solution At equilibrium: ΔG⁰ = 0 = ΔH⁰- TΔS⁰ We must estimate ΔH⁰ and S⁰ from their enthalpies of formation and standard molar entropies, respectively. ΔH⁰ = ∑nΔH⁰f(products) – ∑mΔH⁰f(reactants) ΔH⁰= –102.7 kJ/mol – (–134.1 kJ/mol) ΔH⁰ = + 31.4 kJ/mol ΔS⁰ = ∑nΔS⁰ (products) – ∑mΔS⁰ (reactants) ΔS⁰ = 295.7 J/mol K – (201.7 J/mol K) ΔS⁰ = 94.0 J/mol K (or 94.0 x 10-3 kJ/mol K) Now we can use these values to solve for the temperature: T = T =
T = 334 K = 60.9⁰C The literature boiling point of chloroform is 61.2⁰C. The value we have calculated is very close but slightly lower due to the assumption that ΔH⁰ and S⁰ do not change with temperature when we estimate the ΔH⁰ and S⁰ from their enthalpies of formation and standard molar entropies.

Key Takeaways

The temperature can be the deciding factor in spontaneity when the enthalpy and entropy terms have opposite signs:

– If ΔH is negative, and –TΔS positive, the reaction will be spontaneous at low temperatures (decreasing the magnitude of the entropy term).
– If ΔH is positive, and –TΔS negative, the reaction will be spontaneous at high temperatures (increasing the magnitude of the entropy term).

Chapter 65

9.6 End-of-Chapter Material

Exercises

1. Classify each of the following as spontaneous or nonspontaneous processes:

a) the browning of a cut apple slice on a snack tray over time

b) the rolling of a ball uphill

c) the formation of diamond from the graphite in your pencil

d) the melting of ice cubes in a glass of water you are holding

2. State the second law of thermodynamics.

3. What sign would you expect for ΔS for the following processes?

a) water freezing in a lake during a cold Alberta winter

b) AB(s) + CD(s) → AC(g) + BD(g)

c) a balloon with a fixed amount of gas stretched to a larger volume

d) the sublimation of dry ice

e) 3 E2F2(g) → E6F6(g)

4. Which of the following would you expect to have the higher standard molar entropy, S⁰?

a) Br2(ℓ) or Br2(g)

b) NO2(g) or NO(g)

c) C2H6(g) or C5H12(g)

5. Calculate the ΔS⁰ of the following reactions using the values listed in the appendix.

a) 4 NH3(g) + 5 O2(g) → 6 H2O(g) + 4 NO(g)

b) 2 HgO(s) → 2 Hg(ℓ) + O2(g)

c) 3 FeCl2(s) + KNO3(s) + 4 HCl (aq) → 3 FeCl3(s) + KCl(s) + NO(g) + 2 H2O(ℓ)

6. Draw a diagram showing the approximate entropy change of water from -100⁰C to 250⁰C.

7. A chemical reaction has ΔH⁰ = -43.5 kJ and ΔS⁰ = -65.8 J/K. Calculate ΔG⁰ at 298 K. Is this a spontaneous process?

8. Using data from the appendix, determine ΔG⁰ for all reactions listed in question 5.

9. Find the standard Gibbs energy change for the reaction

CaCO3(s) → CaO(s) + CO2(g)

The ΔGf° values for the three components of this reaction system are CaCO3(s): –1128 kJ mol–1; CaO(s): –603.5 kJ/mol; CO2(g): –137.2 kJ/mol.10

10. Using the appendix data, determine the approximate temperature at which the following processes are at equilibrium:

a) CH2Cl2(ℓ) → CH2Cl2(g)

b) CH3OH(ℓ) → CH3OH(g)

11. Determine if the following reactions would be spontaneous at any temperature, nonspontaneous at any temperature, spontaneous at low temperature but not high temperature, or spontaneous at high temperature but not low temperature:

a) ΔH⁰ = -750 kJ and ΔS⁰ = 250 J/K

b) ΔH⁰ = -100 kJ and ΔS⁰ = -300 J/K

c) ΔH⁰ = 95 kJ and ΔS⁰ = -70 J/K

d) ΔH⁰ = 400 kJ and ΔS⁰ = 500 J/K

Answers

1.

a) spontaneous

b) nonspontaneous

c) nonspontaneous

d) spontaneous

3.

a) ΔS = –

b) ΔS = +

c) ΔS = +

d) ΔS = +

e) ΔS = –

5.

a)

ΔS⁰ = ∑nS⁰(products) – ∑mS⁰(reactants)

ΔS⁰ = (6 S⁰ H2O(g) + 4 S⁰ NO(g)) – (4 S⁰ NH3(g) + 5 S⁰ O2(g))

ΔS⁰ = [(6 x 188.8 J/mol K) + (4 x 210.8 J/mol K)] – [(4 x 192.8 J/mol K) + (5 x 205.2 J/mol K)]

ΔS⁰ = 178.8 J/mol K

b)

ΔS⁰ = ∑nS⁰(products) – ∑mS⁰(reactants)

ΔS⁰ = (2 S⁰ Hg(ℓ) + S⁰ O2(g)) – (2 S⁰ HgO)

ΔS⁰ = [(2 x 75.9 J/mol K) + (205.2 J/mol K)] – (2 x 70.3 J/mol K)

ΔS⁰ = 216.4 J/mol K

c)

ΔS⁰ = ∑nS⁰(products) – ∑mS⁰(reactants)

ΔS⁰ = (3 S⁰ FeCl3(s) + S⁰ KCl(s) + S⁰ NO(g) + 2 S⁰ H2O(ℓ))- (3 S⁰ FeCl2(s) + S⁰ KNO3(s) + 4 S⁰ HCl (aq))

ΔS⁰ = [(3 x 142.3 J/mol K) + (82.6 J/mol K) + (210.8 J/mol K) + (2 x 70.0 J/mol K)] – [(3 x 118.0 J/mol K) + (133.1 J/mol K) + (4 x 56.5 J/mol K)]

ΔS⁰ = 147.2 J/mol K

7.

ΔG⁰ = ΔH⁰ – TΔS⁰

ΔG⁰ = -43.5 kJ – [(298 K)(-65.8 J/K)]

ΔG⁰ = -23.9 kJ

ΔG⁰ is negative therefore this is a spontaneous process.

9.

ΔG° = (–603.5 –137.2) – (–1128) kJ/mol = +130.9 kJ/mol, indicating that the process is not spontaneous under standard conditions (i.e., solid calcium carbonate will not form solid calcium oxide and CO2 at 1 atm partial pressure at 25°C.)

11.

a) spontaneous at all temperatures

b) spontaneous at low temperatures, nonspontaneous at high temperatures

c) nonspontaneous at all temperatures

d) spontaneous at high temperatures, nonspontaneous at low temperatures

PART VII

Unit 7 Chemical Bonds

Chapter 66

Chapter 10. Chemical Bonds

Introduction to Chemical Bonds

Diamond is the hardest natural material known on Earth. Yet diamond is just pure carbon. What is special about this element that makes diamond so hard?

In a perfect diamond crystal, each C atom makes four connections—bonds—to four other C atoms in a three-dimensional matrix. Four is the greatest number of bonds that is commonly made by atoms, so C atoms maximize their interactions with other atoms. This three-dimensional array of connections extends throughout the diamond crystal, making it essentially one large molecule. Breaking a diamond means breaking every bond at once.

Also, the bonds are moderately strong. There are stronger interactions known, but the carbon-carbon connection is fairly strong itself. Not only does a person have to break many connections at once, but also the bonds are strong connections from the start.

There are other substances that have bonding arrangements similar to those of the diamond. Silicon dioxide and boron nitride have some similarities, but neither of them comes close to the ultimate hardness of diamond.

Diamond is the hardest known natural substance and is composed solely of the element carbon.

Source: “Rough Diamond” by United States Geological Survey is in the public domain.

How do atoms make compounds? Typically they join together in such a way that they lose their identities as elements and adopt a new identity as a compound. These joins are called chemical bonds. But how do atoms join together? Ultimately, it all comes down to electrons. Before we discuss how electrons interact, we need to introduce a tool to simply illustrate electrons in an atom.

Chapter 67

10.1 Lewis Electron Dot Diagrams

Learning Objective

1. Draw a Lewis electron dot diagram for an atom or a monatomic ion.

In almost all cases, chemical bonds are formed by interactions of valence electrons in atoms. To facilitate our understanding of how valence electrons interact, a simple way of representing those valence electrons would be useful.

A Lewis electron dot diagram (or electron dot diagram or a Lewis diagram or a Lewis structure) is a representation of the valence electrons of an atom that uses dots around the symbol of the element. The number of dots equals the number of valence electrons in the atom. These dots are arranged to the right and left and above and below the symbol, with no more than two dots on a side. (It does not matter what order the positions are used.) For example, the Lewis electron dot diagram for hydrogen is simply

Because the side is not important, the Lewis electron dot diagram could also be drawn as follows:

The electron dot diagram for helium, with two valence electrons, is as follows:

By putting the two electrons together on the same side, we emphasize the fact that these two electrons are both in the 1s subshell; this is the common convention we will adopt, although there will be exceptions later. The next atom, lithium, has an electron configuration of 1s22s1, so it has only one electron in its valence shell. Its electron dot diagram resembles that of hydrogen, except the symbol for lithium is used:

Beryllium has two valence electrons in its 2s shell, so its electron dot diagram is like that of helium:

The next atom is boron. Its valence electron shell is 2s22p1, so it has three valence electrons. The third electron will go on another side of the symbol:

Again, it does not matter on which sides of the symbol the electron dots are positioned.

For carbon, there are four valence electrons, two in the 2s subshell and two in the 2p subshell. As usual, we will draw two dots together on one side, to represent the 2s electrons. However, conventionally, we draw the dots for the two p electrons on different sides. As such, the electron dot diagram for carbon is as follows:

With nitrogen, which has three p electrons, we put a single dot on each of the three remaining sides:

For oxygen, which has four p electrons, we now have to start doubling up on the dots on one other side of the symbol. When doubling up electrons, make sure that a side has no more than two electrons.

Fluorine and neon have seven and eight dots, respectively:

With the next element, sodium, the process starts over with a single electron because sodium has a single electron in its highest-numbered shell, the n = 3 shell. By going through the periodic table, we see that the Lewis electron dot diagrams of atoms will never have more than eight dots around the atomic symbol.

Example 1 What is the Lewis electron dot diagram for each element? aluminum selenium Solution The valence electron configuration for aluminum is 3s23p1. So it would have three dots around the symbol for aluminum, two of them paired to represent the 3s electrons: The valence electron configuration for selenium is 4s24p4. In the highest-numbered shell, the n = 4 shell, there are six electrons. Its electron dot diagram is as follows: Test Yourself What is the Lewis electron dot diagram for each element? phosphorus argon Answer

For atoms with partially filled d or f subshells, these electrons are typically omitted from Lewis electron dot diagrams. For example, the electron dot diagram for iron (valence shell configuration 4s23d6) is as follows:

Elements in the same column of the periodic table have similar Lewis electron dot diagrams because they have the same valence shell electron configuration. Thus the electron dot diagrams for the first column of elements are as follows:

Monatomic ions are atoms that have either lost (for cations) or gained (for anions) electrons. Electron dot diagrams for ions are the same as for atoms, except that some electrons have been removed for cations, while some electrons have been added for anions. Thus in comparing the electron configurations and electron dot diagrams for the Na atom and the Na+ ion, we note that the Na atom has a single valence electron in its Lewis diagram, while the Na+ ion has lost that one valence electron:

Technically, the valence shell of the Na+ ion is now the n = 2 shell, which has eight electrons in it. So why do we not put eight dots around Na+? Conventionally, when we show electron dot diagrams for ions, we show the original valence shell of the atom, which in this case is the n = 3 shell and empty in the Na+ ion.

In making cations, electrons are first lost from the highest numbered shell, not necessarily the last subshell filled. For example, in going from the neutral Fe atom to the Fe2+ ion, the Fe atom loses its two 4s electrons first, not its 3d electrons, despite the fact that the 3d subshell is the last subshell being filled. Thus we have

Anions have extra electrons when compared to the original atom. Here is a comparison of the Cl atom with the Cl− ion:

Example 2 What is the Lewis electron dot diagram for each ion? Ca2+ O2− Solution Having lost its two original valence electrons, the Lewis electron dot diagram is just Ca2+. Ca2+ The O2− ion has gained two electrons in its valence shell, so its Lewis electron dot diagram is as follows: Test Yourself The valence electron configuration of thallium, whose symbol is Tl, is 6s25d106p1. What is the Lewis electron dot diagram for the Tl+ ion? Answer

Key Takeaways

Lewis electron dot diagrams use dots to represent valence electrons around an atomic symbol.

Lewis electron dot diagrams for ions have fewer (for cations) or more (for anions) dots than the corresponding atom.

Exercises

Explain why the first two dots in a Lewis electron dot diagram are drawn on the same side of the atomic symbol.

Is it necessary for the first dot around an atomic symbol to go on a particular side of the atomic symbol?

What column of the periodic table has Lewis electron dot diagrams with two electrons?

What column of the periodic table has Lewis electron dot diagrams that have six electrons in them?

Draw the Lewis electron dot diagram for each element.

a) strontium

b) silicon

6. Draw the Lewis electron dot diagram for each element.

a) krypton

b) sulfur

7. Draw the Lewis electron dot diagram for each element.

a) titanium

b) phosphorus

8. Draw the Lewis electron dot diagram for each element.

a) bromine

b) gallium

9. Draw the Lewis electron dot diagram for each ion.

a) Mg2+

b) S2−

10. Draw the Lewis electron dot diagram for each ion.

a) In+

b) Br−

11. Draw the Lewis electron dot diagram for each ion.

a) Fe2+

b) N3−

12. Draw the Lewis electron dot diagram for each ion.

a) H+

b) H−

Answers

1.

The first two electrons in a valence shell are s electrons, which are paired.

3.

the second column of the periodic table

5.

a)

b)

7.

a)

b)

9.

a) Mg2+

b)

11.

a) Fe2+

b)

Chapter 68

10.2 Electron Transfer: Ionic Bonds

Learning Objectives

State the octet rule.

Define ionic bond.

Demonstrate electron transfer between atoms to form ionic bonds.

In Section 10.1 “Lewis Electron Dot Diagrams,” we saw how ions are formed by losing electrons to make cations or by gaining electrons to form anions. The astute reader may have noticed something: Many of the ions that form have eight electrons in their valence shell. Either atoms gain enough electrons to have eight electrons in the valence shell and become the appropriately charged anion, or they lose the electrons in their original valence shell. The lower shell, now the valence shell, has eight electrons in it, so the atom becomes positively charged. For whatever reason, having eight electrons in a valence shell is a particularly energetically stable arrangement of electrons. The trend that atoms like to have eight electrons in their valence shell is called the octet rule. When atoms form compounds, the octet rule is not always satisfied for all atoms at all times, but it is a very good rule of thumb for understanding the kinds of bonding arrangements that atoms can make.

It is not impossible to violate the octet rule. Consider sodium: in its elemental form, it has one valence electron and is stable. It is rather reactive, however, and does not require a lot of energy to remove that electron to make the Na+ ion. We could remove another electron by adding even more energy to the ion, to make the Na2+ ion. However, that requires much more energy than is normally available in chemical reactions, so sodium stops at a 1+ charge after losing a single electron. It turns out that the Na+ ion has a complete octet in its new valence shell, the n = 2 shell, which satisfies the octet rule. The octet rule is a result of trends in energies and is useful in explaining why atoms form the ions that they do.

Now consider an Na atom in the presence of a Cl atom. The two atoms have these Lewis electron dot diagrams and electron configurations:

For the Na atom to obtain an octet, it must lose an electron; for the Cl atom to gain an octet, it must gain an electron. An electron transfers from the Na atom to the Cl atom:

resulting in two ions—the Na+ ion and the Cl− ion:

Both species now have complete octets, and the electron shells are energetically stable. From basic physics, we know that opposite charges attract. This is what happens to the Na+ and Cl− ions:

where we have written the final formula (the formula for sodium chloride) as per the convention for ionic compounds, without listing the charges explicitly. The attraction between oppositely charged ions is called an ionic bond, and it is one of the main types of chemical bonds in chemistry. Ionic bonds are caused by electrons transferring from one atom to another.

In electron transfer, the number of electrons lost must equal the number of electrons gained. We saw this in the formation of NaCl. A similar process occurs between Mg atoms and O atoms, except in this case two electrons are transferred:

The two ions each have octets as their valence shell, and the two oppositely charged particles attract, making an ionic bond:

Remember, in the final formula for the ionic compound, we do not write the charges on the ions.

What about when an Na atom interacts with an O atom? The O atom needs two electrons to complete its valence octet, but the Na atom supplies only one electron:

The O atom still does not have an octet of electrons. What we need is a second Na atom to donate a second electron to the O atom:

These three ions attract each other to give an overall neutral-charged ionic compound, which we write as Na2O. The need for the number of electrons lost being equal to the number of electrons gained explains why ionic compounds have the ratio of cations to anions that they do. This is required by the law of conservation of matter as well.

Example 3 With arrows, illustrate the transfer of electrons to form calcium chloride from Ca atoms and Cl atoms. Solution A Ca atom has two valence electrons, while a Cl atom has seven electrons. A Cl atom needs only one more to complete its octet, while Ca atoms have two electrons to lose. Thus we need two Cl atoms to accept the two electrons from one Ca atom. The transfer process looks like this: The oppositely charged ions attract each other to make CaCl2. Test Yourself With arrows, illustrate the transfer of electrons to form potassium sulfide from K atoms and S atoms. Answer

The strength of ionic bonding depends on two major characteristics: the magnitude of the charges and the size of the ion. The greater the magnitude of the charge, the stronger the ionic bond. The smaller the ion, the stronger the ionic bond (because a smaller ion size allows the ions to get closer together). The measured strength of ionic bonding is called the lattice energy. Some lattice energies are given in Table 10.1 “Lattice Energies of Some Ionic Compounds.”

Table 10.1 Lattice Energies of Some Ionic Compounds

Compound	Lattice Energy (kJ/mol)
LiF	1,036
LiCl	853
NaCl	786
NaBr	747
MgF 2	2,957
Na 2 O	2,481
MgO	3,791

Chemistry Is Everywhere: Salt

The element sodium (part [a] in the accompanying figure) is a very reactive metal; given the opportunity, it will react with the sweat on your hands and form sodium hydroxide, which is a very corrosive substance. The element chlorine (part [b] in the accompanying figure) is a pale yellow, corrosive gas that should not be inhaled due to its poisonous nature. Bring these two hazardous substances together, however, and they react to make the ionic compound sodium chloride (part [c] in the accompanying figure), known simply as salt.

Salt is necessary for life. Na+ ions are one of the main ions in the human body and are necessary to regulate the fluid balance in the body. Cl− ions are necessary for proper nerve function and respiration. Both of these ions are supplied by salt. The taste of salt is one of the fundamental tastes; salt is probably the most ancient flavouring known, and one of the few rocks we eat.

The health effects of too much salt are still under debate, although a 2010 report by the US Department of Agriculture concluded that “excessive sodium intake…raises blood pressure, a well-accepted and extraordinarily common risk factor for stroke, coronary heart disease, and kidney disease.”2 It is clear that most people ingest more salt than their bodies need, and most nutritionists recommend curbing salt intake. Curiously, people who suffer from low salt (called hyponatria) do so not because they ingest too little salt but because they drink too much water. Endurance athletes and others involved in extended strenuous exercise need to watch their water intake so their body’s salt content is not diluted to dangerous levels.

Key Takeaways

The tendency to form species that have eight electrons in the valence shell is called the octet rule.

The attraction of oppositely charged ions caused by electron transfer is called an ionic bond.

The strength of ionic bonding depends on the magnitude of the charges and the sizes of the ions.

Exercises

Comment on the possible formation of the K2+ ion. Why is its formation unlikely?

Comment on the possible formation of the Cl2− ion. Why is its formation unlikely?

How many electrons does a Ba atom have to lose to have a complete octet in its valence shell?

How many electrons does a Pb atom have to lose to have a complete octet in its valence shell?

How many electrons does an Se atom have to gain to have a complete octet in its valence shell?

How many electrons does an N atom have to gain to have a complete octet in its valence shell?

With arrows, illustrate the transfer of electrons to form potassium chloride from K atoms and Cl atoms.

With arrows, illustrate the transfer of electrons to form magnesium sulfide from Mg atoms and S atoms.

With arrows, illustrate the transfer of electrons to form scandium fluoride from Sc atoms and F atoms.

With arrows, illustrate the transfer of electrons to form rubidium phosphide from Rb atoms and P atoms.

Which ionic compound has the higher lattice energy—KI or MgO? Why?

Which ionic compound has the higher lattice energy—KI or LiF? Why?

Which ionic compound has the higher lattice energy—BaS or MgO? Why?

Which ionic compound has the higher lattice energy—NaCl or NaI? Why?

Answers

1.

The K2+ ion is unlikely to form because the K+ ion already satisfies the octet rule and is rather stable.

3.

two

5.

two

7.

9.

11.

MgO because the ions have a higher magnitude charge

13.

MgO because the ions are smaller

Chapter 69

10.3 Covalent Bonds

Learning Objectives

Define covalent bond.

Illustrate covalent bond formation with Lewis electron dot diagrams.

Ionic bonding typically occurs when it is easy for one atom to lose one or more electrons and another atom to gain one or more electrons. However, some atoms won’t give up or gain electrons easily. Yet they still participate in compound formation. How?

There is another mechanism for obtaining a complete valence shell: sharing electrons. When electrons are shared between two atoms, they make a bond called a covalent bond.

Let us illustrate a covalent bond by using H atoms, with the understanding that H atoms need only two electrons to fill the 1s subshell. Each H atom starts with a single electron in its valence shell:

The two H atoms can share their electrons:

We can use circles to show that each H atom has two electrons around the nucleus, completely filling each atom’s valence shell:

Because each H atom has a filled valence shell, this bond is stable, and we have made a diatomic hydrogen molecule. (This explains why hydrogen is one of the diatomic elements.) For simplicity’s sake, it is not unusual to represent the covalent bond with a dash, instead of with two dots:

H–H

Because two atoms are sharing one pair of electrons, this covalent bond is called a single bond.

As another example, consider fluorine. F atoms have seven electrons in their valence shell:

These two atoms can do the same thing that the H atoms did; they share their unpaired electrons to make a covalent bond.

Note that each F atom has a complete octet around it now:

We can also write this using a dash to represent the shared electron pair:

There are two different types of electrons in the fluorine diatomic molecule. The bonding electron pair makes the covalent bond. Each F atom has three other pairs of electrons that do not participate in the bonding; they are called lone electron pairs. Each F atom has one bonding pair and three lone pairs of electrons.

Covalent bonds can be made between different elements as well. One example is HF. Each atom starts out with an odd number of electrons in its valence shell:

The two atoms can share their unpaired electrons to make a covalent bond:

We note that the H atom has a full valence shell with two electrons, while the F atom has a complete octet of electrons.

Example 4 Use Lewis electron dot diagrams to illustrate the covalent bond formation in HBr. Solution HBr is very similar to HF, except that it has Br instead of F. The atoms are as follows: The two atoms can share their unpaired electron: Test Yourself Use Lewis electron dot diagrams to illustrate the covalent bond formation in Cl2. Answer

More than two atoms can participate in covalent bonding, although any given covalent bond will be between two atoms only. Consider H and O atoms:

The H and O atoms can share an electron to form a covalent bond:

The H atom has a complete valence shell. However, the O atom has only seven electrons around it, which is not a complete octet. We fix this by including a second H atom, whose single electron will make a second covalent bond with the O atom:

(It does not matter on what side the second H atom is positioned.) Now the O atom has a complete octet around it, and each H atom has two electrons, filling its valence shell. This is how a water molecule, H2O, is made.

Example 5 Use a Lewis electron dot diagram to show the covalent bonding in NH3. Solution The N atom has the following Lewis electron dot diagram: It has three unpaired electrons, each of which can make a covalent bond by sharing electrons with an H atom. The electron dot diagram of NH3 is as follows: Test Yourself Use a Lewis electron dot diagram to show the covalent bonding in PCl3. Answer

There is a simple set of steps for determining the Lewis electron dot diagram of a simple molecule. First, you must identify the central atom and the surrounding atoms. The central atom is the atom in the center of the molecule, while the surrounding atoms are the atoms making bonds to the central atom. The central atom is usually written first in the formula of the compound (H2O is the notable exception). After the central and surrounding atoms have been identified, follow these steps:

Count the total number of valence electrons. Add extra if the species has negative charges and remove some for every positive charge on the species.

Write the central atom and surround it with the surrounding atoms.

Put a pair of electrons between the central atom and each surrounding atom.

Complete the octets around the surrounding atoms (except for H).

Put the remaining electrons, if any, around the central atom.

Check that every atom has a full valence shell.

Let us try these steps to determine the electron dot diagram for BF4−. The B atom is the central atom, and the F atoms are the surrounding atoms. There is a negative sign on the species, so we have an extra electron to consider.

1. Count the total number of valence electrons. B has 3, each F has 7, and there is one extra electron: 3 + 7 + 7 + 7 + 7 + 1 = 32.

2. Write the central atom surrounded by surrounding atoms.

3. Put a pair of electrons between the central atom and each surrounding atom. This uses up eight electrons, so we have 32 − 8 = 24 electrons left.

4. Complete the octets around the surrounding atoms (except for H). This uses up 24 more electrons, leaving 24 − 24 = 0 electrons left.

5. Put the remaining electrons, if any, around the central atom. There are no additional electrons to add to the central atom.

6. Check. The B atom has eight electrons around it, as does each F atom. Each atom has a complete octet. This is a good Lewis electron dot diagram for BF4−.

Sometimes, however, these steps don’t work. If we were to follow these steps for the compound formaldehyde (CH2O), we would get the following:

The H and O atoms have the proper number of electrons, but the C atom has only six electrons around it, not the eight electrons for an octet. How do we fix this?

We fix this by recognizing that two atoms can share more than one pair of electrons. In the case of CH2O, the O and C atoms share two pairs of electrons, with the following Lewis electron dot diagram as a result:

By circling the electrons around each atom, we can now see that the O and C atoms have octets, while each H atom has two electrons:

Each valence shell is full, so this is an acceptable Lewis electron dot diagram. If we were to use lines to represent the bonds, we would use two lines between the C and O atoms:

The bond between the C and O atoms is a double bond and represents two bonding pairs of electrons between the atoms. If using the rules for drawing Lewis electron dot diagrams don’t work as written, a double bond may be required.

Example 6 What is the proper Lewis electron dot diagram for CO2? Solution The central atom is a C atom, with O atoms as surrounding atoms. We have a total of 4 + 6 + 6 = 16 valence electrons. Following the rules for Lewis electron dot diagrams for compounds gives us The O atoms have complete octets around them, but the C atom has only four electrons around it. The way to solve this dilemma is to make a double bond between carbon and each O atom: Each O atom still has eight electrons around it, but now the C atom also has a complete octet. This is an acceptable Lewis electron dot diagram for CO2. Test Yourself What is the proper Lewis electron dot diagram for carbonyl sulfide (COS)? Answer

It is also possible to have a triple bond, in which there are three pairs of electrons between two atoms. Good examples of this are elemental nitrogen (N2) and acetylene (C2H2):

Acetylene is an interesting example of a molecule with two central atoms, which are both C atoms.

Polyatomic ions are bonded together with covalent bonds. Because they are ions, however, they participate in ionic bonding with other ions. So both major types of bonding can occur at the same time.

Food and Drink App: Vitamins and Minerals

Vitamins are nutrients that our bodies need in small amounts but cannot synthesize; therefore, they must be obtained from the diet. The word vitamin comes from “vital amine” because it was once thought that all these compounds had an amine group (NH2) in it. This is not actually true, but the name stuck anyway.

All vitamins are covalently bonded molecules. Most of them are commonly named with a letter, although all of them also have formal chemical names. Thus vitamin A is also called retinol, vitamin C is called ascorbic acid, and vitamin E is called tocopherol. There is no single vitamin B; there is a group of substances called the B complex vitamins that are all water soluble and participate in cell metabolism. If a diet is lacking in a vitamin, diseases such as scurvy or rickets develop. Luckily, all vitamins are available as supplements, so any dietary deficiency in a vitamin can be easily corrected.

A mineral is any chemical element other than carbon, hydrogen, oxygen, or nitrogen that is needed by the body. Minerals that the body needs in quantity include sodium, potassium, magnesium, calcium, phosphorus, sulfur, and chlorine. Essential minerals that the body needs in tiny quantities (so-called trace elements) include manganese, iron, cobalt, nickel, copper, zinc, molybdenum, selenium, and iodine. Minerals are also obtained from the diet. Interestingly, most minerals are consumed in ionic form, rather than as elements or from covalent molecules. Like vitamins, most minerals are available in pill form, so any deficiency can be compensated for by taking supplements.

Key Takeaways

Covalent bonds are formed when atoms share electrons.

Lewis electron dot diagrams can be drawn to illustrate covalent bond formation.

Double bonds or triple bonds between atoms may be necessary to properly represent the bonding in some molecules.

Exercises

How many electrons will be in the valence shell of H atoms when it makes a covalent bond?

How many electrons will be in the valence shell of non-H atoms when they make covalent bonds?

What is the Lewis electron dot diagram of I2? Circle the electrons around each atom to verify that each valence shell is filled.

What is the Lewis electron dot diagram of H2S? Circle the electrons around each atom to verify that each valence shell is filled.

What is the Lewis electron dot diagram of NCl3? Circle the electrons around each atom to verify that each valence shell is filled.

What is the Lewis electron dot diagram of SiF4? Circle the electrons around each atom to verify that each valence shell is filled.

Draw the Lewis electron dot diagram for each substance.

a) SF2

b) BH4−

8. Draw the Lewis electron dot diagram for each substance.

a) PI3

b) OH−

9. Draw the Lewis electron dot diagram for each substance.

a) GeH4

b) ClF

10. Draw the Lewis electron dot diagram for each substance.

a) AsF3

b) NH4+

11. Draw the Lewis electron dot diagram for each substance. Double or triple bonds may be needed.

a) SiO2

b) C2H4 (assume two central atoms)

12. Draw the Lewis electron dot diagram for each substance. Double or triple bonds may be needed.

a) CN−

b) C2Cl2 (assume two central atoms)

13. Draw the Lewis electron dot diagram for each substance. Double or triple bonds may be needed.

a) CS2

b) NH2CONH2 (assume that the N and C atoms are the central atoms)

14. Draw the Lewis electron dot diagram for each substance. Double or triple bonds may be needed.

a) POCl

b) HCOOH (assume that the C atom and one O atom are the central atoms)

Answers
1. two

3.

5.

7.

a)

b)

9.

a)

b)

11.

a)

b)

13.

a)

b)

Chapter 70

10.4 Other Aspects of Covalent Bonds

Learning Objectives

Describe a nonpolar bond and a polar bond.

Use electronegativity to determine whether a bond between two elements will be nonpolar covalent, polar covalent, or ionic.

Describe the bond energy of a covalent bond.

Consider the H2 molecule:

Because the nuclei of each H atom contain protons, the electrons in the bond are attracted to the nuclei (opposite charges attract). But because the two atoms involved in the covalent bond are both H atoms, each nucleus attracts the electrons by the same amount. Thus the electron pair is equally shared by the two atoms. The equal sharing of electrons in a covalent bond is called a nonpolar covalent bond.

Now consider the HF molecule:

There are two different atoms involved in the covalent bond. The H atom has one proton in its nucleus that is attracting the bonding pair of electrons. However, the F atom has nine protons in its nucleus, with nine times the attraction of the H atom. The F atom attracts the electrons so much more strongly that the electrons remain closer to the F atom than to the H atom; the electrons are no longer equally balanced between the two nuclei.

A covalent bond between different atoms that attract the shared electrons by different amounts and cause an imbalance of electron distribution is called a polar covalent bond.

Technically, any covalent bond between two different elements is polar. However, the degree of polarity is important. A covalent bond between two different elements may be so slightly imbalanced that the bond is, essentially, nonpolar. A bond may be so polar that an electron actually transfers from one atom to another, forming a true ionic bond. How do we judge the degree of polarity?

Scientists have devised a scale called electronegativity,a scale for judging how much atoms of any element attract electrons. Electronegativity is a unitless number; the higher the number, the more an atom attracts electrons. A common scale for electronegativity is shown in Figure 10.3 “Electronegativities of the Elements.”

Figure 10.3 Electronegativities of the Elements

Electronegativities are used to determine the polarity of covalent bonds.

The polarity of a covalent bond can be judged by determining the difference between the electronegativities of the two atoms involved in the covalent bond, as summarized in Table 10.2 “Electronegativities of Bond Types.”

Table 10.2 Electronegativities of Bond Types

Electronegativity Difference	Bond Type
0	nonpolar covalent
0–0.4	slightly polar covalent
0.4–1.9	definitely polar covalent
>1.9	likely ionic

The unequal sharing of electrons in a covalent bond is usually indicated by partial charge notation as seen earlier, or by a dipole arrow. Dipole arrows depict the unequal sharing by showing the flow of electron density. Dipole arrows have an end with a “+ sign” depicting an electropositive area from which electron density is being pulled, and an end with an arrowhead pointing to the more electronegative atom toward which electron density is being pulled.

Example 7 What is the polarity of each of the following bonds? C–H O–H Solution Using Figure 10.2 “Electronegativities of the Elements,” we can calculate the electronegativity differences of the atoms involved in the bond. For the C–H bond, the difference in electronegativities is 2.5 − 2.1 = 0.4. Thus we predict that this bond will be slightly polar covalent. For the O–H bond, the difference in electronegativities is 3.5 − 2.1 = 1.4, so we predict that this bond will be definitely polar covalent. Test Yourself What is the polarity of each of these bonds? Rb–F P–Cl Answers likely ionic polar covalent

The polarity of a covalent bond can have significant influence on the properties of the substance. If the overall molecule is polar, the substance may have a higher melting point and boiling point than expected; also, it may or may not be soluble in various other substances, such as water or hexane.

It should be obvious that covalent bonds are stable because molecules exist. However, the bonds can be broken if enough energy is supplied to a molecule. To break most covalent bonds between any two given atoms, a certain amount of energy must be supplied. Although the exact amount of energy depends on the molecule, the approximate amount of energy to be supplied is similar if the atoms in the bond are the same. The approximate amount of energy needed to break a covalent bond is called the bond energy of the covalent bond. Table 10.3 “Bond Energies of Covalent Bonds” lists the bond energies of some covalent bonds.

Table 10.3 Bond Energies of Covalent Bonds

Bond	Energy (kJ/mol)
C–C	348	N–N	163
C=C	611	N=N	418
C≡C	837	N≡N	946
C–O	351	N–H	389
C=O	799	O–O	146
C–Cl	328	O=O	498
C–H	414	O–H	463
F–F	159	S–H	339
H–Cl	431	S=O	523
H–F	569	Si–H	293
H–H	436	Si–O	368

A few trends are obvious from Table 10.3 “Bond Energies of Covalent Bonds.” For bonds that involve the same two elements, a double bond is stronger than a single bond, and a triple bond is stronger than a double bond. The energies of multiple bonds are not exact multiples of the single-bond energy; for carbon-carbon bonds, the energy increases somewhat less than double or triple the C–C bond energy, while for nitrogen-nitrogen bonds the bond energy increases at a rate greater than the multiple of the N–N single bond energy. The bond energies in Table 10.3 “Bond Energies of Covalent Bonds” are average values; the exact value of the covalent bond energy will vary slightly among molecules with these bonds but should be close to these values.

To be broken, covalent bonds always require energy; that is, covalent-bond breaking is always an endothermic process. Thus the ΔH for this process is positive:

Molecule–O–H → Molecule–O + H ΔH ≈ +463 kJ/mol

However, when making a covalent bond, energy is always given off; covalent-bond making is always an exothermic process. Thus ΔH for this process is negative:

Molecule–S + H → Molecule–S–H ΔH ≈ −339 kJ/mol

Bond energies can be used to estimate the energy change of a chemical reaction. When bonds are broken in the reactants, the energy change for this process is endothermic. When bonds are formed in the products, the energy change for this process is exothermic. We combine the positive energy change with the negative energy change to estimate the overall energy change of the reaction. For example, in

2H2 + O2 → 2H2O

We can draw Lewis electron dot diagrams for each substance to see what bonds are broken and what bonds are formed:

(The lone electron pairs on the O atoms are omitted for clarity.) We are breaking two H–H bonds and one O–O double bond and forming four O–H single bonds. The energy required for breaking the bonds is as follows:

2 H–H bonds:	2(+436 kJ/mol)
1 O=O bond:	+498 kJ/mol
Total:	+1,370 kJ/mol

The energy given off during the formation of the four O–H bonds is as follows:

4 O–H bonds:	4(−463 kJ/mol)
Total:	−1,852 kJ/mol

Combining these two numbers:

+1,370 kJ/mol + (−1,852 kJ/mol)
Net Change:	−482 kJ/mol ≈ Δ H

The actual ΔH is −572 kJ/mol; we are off by about 16%—although not ideal, a 16% difference is reasonable because we used estimated, not exact, bond energies.

Example 8 Estimate the energy change of this reaction. Solution Here, we are breaking a C–C double bond and an H–H single bond and making a C–C single bond and two C–H single bonds. Bond breaking is endothermic, while bond making is exothermic. For the bond breaking:	1 C=C:	+611 kJ/mol
1 H–H:	+436 kJ/mol
Total:	+1,047 kJ/mol
For the bond making:	1 C–C:	−348 kJ/mol
2 C–H:	2(−414 kJ/mol)
Total	−1,176 kJ/mol
Overall, the energy change is +1,047 + (−1,176) = −129 kJ/mol. Test Yourself Estimate the energy change of this reaction. Answer −295 kJ/mol

Key Takeaways

Covalent bonds can be nonpolar or polar, depending on the electronegativities of the atoms involved.

Covalent bonds can be broken if energy is added to a molecule.

The formation of covalent bonds is accompanied by energy given off.

Covalent bond energies can be used to estimate the enthalpy changes of chemical reactions.

Exercises

Give an example of a nonpolar covalent bond. How do you know it is nonpolar?

Give an example of a polar covalent bond. How do you know it is polar?

How do you know which side of a polar bond has the partial negative charge? Identify the negatively charged side of each polar bond.

a) H–Cl

b) H–S

4. How do you know which side of a polar bond has the partial positive charge? Identify the positively charged side of each polar bond.

a) H–Cl

b) N-F

5. Label the bond between the given atoms as nonpolar covalent, slightly polar covalent, definitely polar covalent, or likely ionic.

a) H and C

b) C and F

c) K and F

6. Label the bond between the given atoms as nonpolar covalent, slightly polar covalent, definitely polar covalent, or likely ionic.

a) S and Cl

b) P and O

c) Cs and O

7. Which covalent bond is stronger: a C–C bond or a C–H bond?

8. Which covalent bond is stronger: an O–O double bond or an N–N double bond?

9. Estimate the enthalpy change for this reaction. Start by drawing the Lewis electron dot diagrams for each substance.

N2 + 3 H2 → 2 NH3

10. Estimate the enthalpy change for this reaction. Start by drawing the Lewis electron dot diagrams for each substance.

HN=NH + 2 H2 → 2 NH3

11. Estimate the enthalpy change for this reaction. Start by drawing the Lewis electron dot diagrams for each substance.

CH4 + 2 O2 → CO2 + 2 H2O

12. Estimate the enthalpy change for this reaction. Start by drawing the Lewis electron dot diagrams for each substance.

4 NH3 + 3 O2 → 2 N2 + 6 H2O

Answers

1.

H–H; it is nonpolar because the two atoms have the same electronegativities (answers will vary).

3.

a) Cl side

b) S side

5.

a) slightly polar covalent

b) definitely polar covalent

c) likely ionic

7.

C–H bond

9.

−80 kJ

11.

−798 kJ

Chapter 71

10.5 Violations of the Octet Rule

Learning Objectives

Recognize the three major types of violations of the octet rule.

As important and useful as the octet rule is in chemical bonding, there are some well-known violations. This does not mean that the octet rule is useless—quite the contrary. As with many rules, there are exceptions, or violations.

There are three violations to the octet rule. Odd-electron molecules represent the first violation to the octet rule. Although they are few, some stable compounds have an odd number of electrons in their valence shells. With an odd number of electrons, at least one atom in the molecule will have to violate the octet rule. Examples of stable odd-electron molecules are NO, NO2, and ClO2. The Lewis electron dot diagram for NO is as follows:

Although the O atom has an octet of electrons, the N atom has only seven electrons in its valence shell. Although NO is a stable compound, it is very chemically reactive, as are most other odd-electron compounds.

Electron-deficient molecules represent the second violation to the octet rule. These stable compounds have less than eight electrons around an atom in the molecule. The most common examples are the covalent compounds of beryllium and boron. For example, beryllium can form two covalent bonds, resulting in only four electrons in its valence shell:

Boron commonly makes only three covalent bonds, resulting in only six valence electrons around the B atom. A well-known example is BF3:

The third violation to the octet rule is found in those compounds with more than eight electrons assigned to their valence shell. These are called expanded valence shell molecules. Such compounds are formed only by central atoms in the third row of the periodic table or beyond that have empty d orbitals in their valence shells that can participate in covalent bonding. One such compound is PF5. The only reasonable Lewis electron dot diagram for this compound has the P atom making five covalent bonds:

Formally, the P atom has 10 electrons in its valence shell.

Example 9 Identify each violation of the octet rule by drawing a Lewis electron dot diagram. ClO SF6 Solution With one Cl atom and one O atom, this molecule has 6 + 7 = 13 valence electrons, so it is an odd-electron molecule. A Lewis electron dot diagram for this molecule is as follows: In SF6, the central S atom makes six covalent bonds to the six surrounding F atoms, so it is an expanded valence shell molecule. Its Lewis electron dot diagram is as follows: Test Yourself Identify the violation to the octet rule in XeF2 by drawing a Lewis electron dot diagram. Answer The Xe atom has an expanded valence shell with more than eight electrons around it.

Key Takeaways

There are three violations to the octet rule: odd-electron molecules, electron-deficient molecules, and expanded valence shell molecules.

Exercises

Why can an odd-electron molecule not satisfy the octet rule?

Why can an atom in the second row of the periodic table not form expanded valence shell molecules?

Draw an acceptable Lewis electron dot diagram for these molecules that violate the octet rule.

a) NO2

b) XeF4

4. Draw an acceptable Lewis electron dot diagram for these molecules that violate the octet rule.

a) BCl3

b) ClO2

5. Draw an acceptable Lewis electron dot diagram for these molecules that violate the octet rule.

a) POF3

b) ClF3

6. Draw an acceptable Lewis electron dot diagram for these molecules that violate the octet rule.

a) SF4

b) BeH2

Answers

1. There is no way all electrons can be paired if there are an odd number of them.

3.

a)

b)

5.

a)

b)

Chapter 72

10.6 Molecular Shapes and Polarity

Learning Objective

Determine the shape of simple molecules.

Determine the polarity of molecules using net molecular dipoles.

Molecules have shapes. There is an abundance of experimental evidence to that effect—from their physical properties to their chemical reactivity. Small molecules—molecules with a single central atom—have shapes that can be easily predicted.

The basic idea in molecular shapes is called valence shell electron pair repulsion (VSEPR). It says that electron pairs, being composed of negatively charged particles, repel each other to get as far away from each other as possible. VSEPR makes a distinction between electron group geometry, which expresses how electron groups (bonding and nonbonding electron pairs) are arranged, and molecular geometry, which expresses how the atoms in a molecule are arranged. However, the two geometries are related.

There are two types of electron groups: any type of bond—single, double, or triple—and lone electron pairs. When applying VSEPR to simple molecules, the first thing to do is to count the number of electron groups around the central atom. Remember that a multiple bond counts as only one electron group.

Any molecule with only two atoms is linear. A molecule whose central atom contains only two electron groups orients those two groups as far apart from each other as possible—180° apart. When the two electron groups are 180° apart, the atoms attached to those electron groups are also 180° apart, so the overall molecular shape is linear. Examples include BeH2 and CO2:

A molecule with three electron groups orients the three groups as far apart as possible. They adopt the positions of an equilateral triangle—120° apart and in a plane. The shape of such molecules is trigonal planar. An example is BF3:

Some substances have a trigonal planar electron group distribution but have atoms bonded to only two of the three electron groups. An example is GeF2:

From an electron-group-geometry perspective, GeF2 has a trigonal planar shape, but its real shape is dictated by the positions of the atoms. This shape is called bent or angular.

A molecule with four electron groups around the central atom orients the four groups in the direction of a tetrahedron, as shown in Figure 10.4 “Tetrahedral Geometry.” If there are four atoms attached to these electron groups, then the molecular shape is also tetrahedral. Methane (CH4) is an example.

Four electron groups orient themselves in the shape of a tetrahedron.

This diagram of CH4 illustrates the standard convention of displaying a three-dimensional molecule on a two-dimensional surface. The straight lines are in the plane of the page, the solid wedged line is coming out of the plane toward the reader, and the dashed wedged line is going out of the plane away from the reader.

NH3 is an example of a molecule whose central atom has four electron groups but only three of them are bonded to surrounding atoms.

Although the electron groups are oriented in the shape of a tetrahedron, from a molecular geometry perspective, the shape of NH3 is trigonal pyramidal.

H2O is an example of a molecule with a central atom that has four electron groups but only two of them are bonded to surrounding atoms.

Although the electron groups are oriented in the shape of a tetrahedron, the shape of the molecule is bent or angular. A molecule with four electron groups around the central atom but only one electron group bonded to another atom is linear because there are only two atoms in the molecule.

Double or triple bonds count as a single electron group. CH2O has the following Lewis electron dot diagram.

The central C atom has three electron groups around it because the double bond counts as one electron group. The three electron groups repel each other to adopt a trigonal planar shape:

(The lone electron pairs on the O atom are omitted for clarity.) The molecule will not be a perfect equilateral triangle because the C–O double bond is different from the two C–H bonds, but both planar and triangular describe the appropriate approximate shape of this molecule.

Example 10 What is the approximate shape of each molecule? PCl3 NOF Solution The first step is to draw the Lewis electron dot diagram of the molecule. For PCl3, the Lewis electron dot diagram is as follows: The lone electron pairs on the Cl atoms are omitted for clarity. The P atom has four electron groups with three of them bonded to surrounding atoms, so the molecular shape is trigonal pyramidal. The Lewis diagram for NOF is as follows: The N atom has three electron groups on it, two of which are bonded to other atoms. The molecular shape is bent. Test Yourself What is the approximate molecular shape of CH2Cl2? Answer Tetrahedral

Table 10.4 “Summary of Molecular Shapes” summarizes the shapes of molecules based on their number of electron groups and surrounding atoms.

Table 10.4 Summary of Molecular Shapes

Number of Electron Groups on Central Atom	Number of Surrounding Atoms	Molecular Shape
any	1	linear
2	2	linear
3	3	trigonal planar
3	2	bent
4	4	tetrahedral
4	3	trigonal pyramidal
4	2	bent

Molecular Polarity

The overall polarity of molecules with more than one bond is determined from both the polarity of the individual bonds and the shape of the molecule. Each bond’s dipole moment can be treated as a vector quantity, having a magnitude and direction. Therefore the molecular polarity is the vector sum of the individual bond dipoles.

How to determine the vector sum

One method to determine the vector sum of dipole arrows is known as the tail-to-head method. Let’s examine this method for a molecule of water.

1. First draw the Lewis electron dot diagram for water and determine its molecular shape. Water has four electron groups, but only two atoms attached to the central atom so it is bent.

2. Draw in dipole arrows for all polar covalent bonds, starting the arrow at the more electropositive atom, and ending at the more electronegative atom.

3. Connect the dipole arrows tail-to-head.

4. Draw a new line connecting the tail of the first vector. This is the net molecular dipole.

5. Now superimpose the net molecular dipole arrow onto the molecule.

An alternative method to determine the vector sum of dipole arrows is known as the vector component method. Let’s examine this method again for a molecule of water. The first two steps remain the same as the tail-to-head method:

1. First draw the Lewis electron dot diagram for water and determine its molecular shape. Water has four electron groups, but only two atoms attached to the central atom so it is bent.

2. Draw in dipole arrows for all polar covalent bonds, starting the arrow at the more electropositive atom, and ending at the more electronegative atom.

3. For dipole arrows at an angle, separate them into horizontal and vertical vector components.

As a result of the vector quantity nature of bond dipoles, some molecules may contain polar bonds, yet have no net molecular dipole moment. For example, CO

:

Key Takeaways

The approximate shape of a molecule can be predicted from the number of electron groups and the number of surrounding atoms.

The molecular polarity can be established by determining the vector sum of all bond dipoles.

Exercises

What is the basic premise behind VSEPR?

What is the difference between electron group geometry and molecular geometry?

Identify the electron group geometry and molecular geometry of each molecule.

a) H2S

b) POCl3

4. Identify the electron group geometry and the molecular geometry of each molecule.

a) CS2

b) H2S

5. Identify the electron group geometry and the molecular geometry of each molecule.

a) HCN

b) CCl4

6. Identify the electron group geometry and the molecular geometry of each molecule.

a) BI3

b) PH3

7. What is the geometry of each species?

a) CN−

b) PO43−

8. What is the geometry of each species?

a) PO33−

b) NO3−

9. What is the geometry of each species?

a) COF2

b) C2Cl2 (both C atoms are central atoms and are bonded to each other)

10. What is the geometry of each species?

a) CO32−

b) N2H4 (both N atoms are central atoms and are bonded to each other)

11. Determine the net molecular dipole of each species:

a) BF3

b) NH3

Answers

1. Electron pairs repel each other.

3.

a) electron group geometry: tetrahedral; molecular geometry: bent

b) electron group geometry: tetrahedral; molecular geometry: tetrahedral

5.

a) electron group geometry: linear; molecular geometry: linear

b) electron group geometry: tetrahedral; molecular geometry: tetrahedral

7.

a) linear

b) tetrahedral

9.

a) trigonal planar

b) linear and linear about each central atom

11.

a) BF3 = No net dipole moment

b) NH3 =

Chapter 73

10.7 Valence Bond Theory and Hybrid Orbitals

Learning Objectives

Gain an understanding of valence bond theory.

Gain an understanding of hybrid orbitals.

Valence Bond Theory

Earlier we saw that covalent bonding requires the sharing of electrons between two atoms, so that each atom can complete its valence shell. But how does this sharing process occur? Remember that we can only estimate the likelihood of finding an electron in a certain area as a probability. This probability is represented as a distribution in space that we call an atomic orbital (Figure 10.5 “Representations of s and p atomic orbitals”)

The valence bond theory states that atoms in a covalent bond share electron density through the overlapping of their valence atomic orbitals. This creates an area of electron pair density between the two atoms. Since these electrons are simultaneously attracted to both nuclei, the electron pair holds the two atoms together.

Let’s examine the simplest case of atomic overlap resulting in a covalent bond, the formation of H2 from two hydrogen atoms (Figure 10.6 “A diagram showing the overlap of s orbitals of two hydrogen atoms to form H2“). The 1s orbitals of the two hydrogens approach each other and overlap to form a bond that has cylindrical symmetry known as a sigma bond (σ bond). Repulsion forces between the two nuclei and between the two electrons are also present. The optimal distance between atoms, which maximizes the attractive forces and minimizes the repulsive forces, gives the H-H sigma bond a length of 74 pm.

Figure 10.6. A diagram showing the overlap of

orbitals of two hydrogen atoms to form H

.

For molecules that contain double or triple bonds, one of these bonds is a sigma bond, and the remaining multiple bonds are a different type of bond known as a pi bond (π bond). Pi bonds result from the sideways overlap of p orbitals, placing electron density on opposite sides of the internuclear axis (Figure 10.7 “Pi bond diagram showing sideways overlapping of p orbitals”).

Hybrid Orbitals

sp3 hybridization

A problem arises when we apply the valence bond theory method of orbital overlap to even simple molecules like methane (CH4) (Figure 10.8 “Methane”). Carbon (1s2 2s2 2p2) only has two unpaired valence electrons that are available to be shared through orbital overlap, yet CH4 has four C-H σ bonds!

In 1931, Linus Pauling (Figure 10.9) proposed a mathematical mixing of atomic orbitals known as hybridization. The 2s and three 2p orbitals are averaged mathematically through hybridization to produce four degenerate sp3 hybrid orbitals (Figure 10.10 “Hybridization of carbon to generate sp3 orbitals”). Note that in hybridization, the number of atomic orbitals hybridized is equal to the number of hybrid orbitals generated.

Figure 10.10. Hybridization of carbon to generate

orbitals.

The sp3 orbitals, being a combination of a spherical s orbital and propeller- (or peanut-) shaped p orbital, give an unsymmetrical propeller shape where one lobe of the orbital is larger (fatter) than the other (Figure 10.11 “An sp3 hybridized atomic orbital”). This larger lobe is typically used for orbital overlap in covalent bonding.

Figure 10.11. An

hybridized atomic orbital.

According to VSEPR theory, the four degenerate orbitals will arrange as far apart from each other as possible, giving a tetrahedral geometry with each orbital 109.5o apart (Figure 10.12 “A carbon atom’s four tetrahedral sp3 hybridized orbitals”).

sp2 hybridization

Let’s examine another simple molecule, ethene (C2H4) (Figure 10.13 “Ethene”). Each carbon of ethene is bonded to two hydrogens and a carbon. There is also a double bond between the two carbons.

Both the unhybridized atomic orbitals of carbon and the sp3 hybridization we just examined do not explain the bonding observed in ethene. In this case, only the 2s and two of the 2p orbitals hybridize to give three new sp2 hybridized orbitals capable of forming the three σ bonds of each carbon in ethene (Figure 10.14 “Hybridization of carbon to generate sp2 orbitals”).

Figure 10.14. Hybridization of carbon to generate

orbitals.

The three hybridized orbitals arrange in a trigonal planar structure with a bond angle of 120o following VSEPR (Figure 10.15 “A carbon atom’s trigonal planar sp2 hybridized orbitals”).

The unhybridized 2p orbital in both carbons are left available to form the double bond’s π bond.

sp hybridization

The final example of hybridization we will examine is the molecule ethyne (C2H2) (Figure 10.16 “Ethyne”).

The carbons in ethyne are each sigma bonded to a single hydrogen, but triple bonded to each other. Again, the models of hybridization we have looked at so far are insufficient to explain the bonding pattern observed. In ethyne, only the 2s and one of the 2p orbitals hybridize to give two new sp hybridized orbitals capable of forming the two σ bonds of each carbon in ethyne (Figure 10.17 “Hybridization of carbon to generate sp orbitals”).

Figure 10.17. Hybridization of carbon to generate

orbitals.

The two hybridized sp orbitals arrange linearly with a bond angle of 180o following VSEPR (Figure 10.18 “A carbon atom’s linear sp hybridized orbitals”).

The two remaining unhybridized 2p orbitals in both carbons are left available to form the triple bond’s two π bonds.

Other hybridizations

Other hybridizations are possible, allowing us to apply valence bond theory to explain the bonding patterns observed in most real molecules. Some additional hybridizations are summarized in Table 10.5 “Hybrid Orbitals and Geometry.”

Key Takeaways

Valence bond theory explains bonding through the overlap of atomic orbitals.

Atomic orbitals can be hybridized mathematically to better explain actual bonding patterns.

Chapter 74

10.8 End-of-Chapter Material

Additional Exercises

Explain why iron and copper have the same Lewis electron dot diagram when they have different numbers of electrons.

Name two ions with the same Lewis electron dot diagram as the Cl− ion.

Based on the known trends, what ionic compound from the first column of the periodic table and the next-to-last column of the periodic table should have the highest lattice energy?

Based on the known trends, what ionic compound from the first column of the periodic table and the next-to-last column of the periodic table should have the lowest lattice energy?

P2 is not a stable form of phosphorus, but if it were, what would be its likely Lewis electron dot diagram?

Se2 is not a stable form of selenium, but if it were, what would be its likely Lewis electron dot diagram?

What are the Lewis electron dot diagrams of SO2, SO3, and SO42−?

What are the Lewis electron dot diagrams of PO33− and PO43−?

Which bond do you expect to be more polar—an O–H bond or an N–H bond?

Which bond do you expect to be more polar—an O–F bond or an S–O bond?

Use bond energies to estimate the energy change of this reaction.

C3H8 + 5 O2 → 3 CO2 + 4 H2O

Use bond energies to estimate the energy change of this reaction.

N2H4 + O2 → N2 + 2 H2O

Ethylene (C2H4) has two central atoms. Determine the geometry around each central atom and the shape of the overall molecule.

Hydrogen peroxide (H2O2) has two central atoms. Determine the geometry around each central atom and the shape of the overall molecule.

Determine the molecular dipole moments for the following molecules:

Answers

Iron has

electrons that typically are not shown on Lewis electron dot diagrams.

3. LiF

5. It would be like N2:

7.

9. an O–H bond

11. −2,000 kJ

13. trigonal planar about both central C atoms

15.

PART VIII

Unit 8 Solids, Liquids & Solutions

Chapter 75

Chapter 11. Solids and Liquids

Introduction to Solids and Liquids

There is an urban legend that glass is an extremely thick liquid rather than a solid, even at room temperature. Proponents claim that old windows are thicker at the bottom than at the top, suggesting that the glass flowed down over time. Unfortunately, the proponents of this idea have no credible evidence that this is true, as old windows were likely not subject to the stricter manufacturing standards that exist today. Also, when mounting a piece of glass that has an obviously variable thickness, it makes structural sense to put the thicker part at the bottom, where it will support the object better.

Liquids flow when a small force is placed on them, even if only very slowly. Solids, however, may deform under a small force, but they return to their original shape when the force is relaxed. This is how glass behaves: it goes back to its original shape (unless it breaks under the applied force). Observers also point out that telescopes with glass lenses to focus light still do so even decades after manufacture—a circumstance that would not be so if the lens were liquid and flowed.

Glass is a solid at room temperature. Don’t let anyone tell you otherwise!

Is he cleaning a solid or a liquid? Contrary to some claims, glass is a solid, not a very thick liquid.

Source: “Cleaning Window” by newlivinghouston is licensed under Creative Commons Attribution 2.0 Generic

In Chapter 7 “Gases”, we discussed the properties of gases. Here, we consider some properties of liquids and solids. As a review, Table 11.1 “Properties of the Three Phases of Matter” lists some general properties of the three phases of matter.

Table 11.1 Properties of the Three Phases of Matter

Phase	Shape	Density	Compressibility
Gas	fills entire container	low	high
Liquid	fills a container from bottom to top	high	low
Solid	rigid	high	low

Chapter 76

11.1 Intermolecular Forces

Learning Objective

1. Relate phase to intermolecular forces.

Why does a substance have the phase it does? The preferred phase of a substance at a given set of conditions is a balance between the energy of the particles and intermolecular forces (or intermolecular interactions) between the particles. If the forces between particles are strong enough, the substance is a liquid or, if stronger, a solid. If the forces between particles are weak and sufficient energy is present, the particles separate from each other, so the gas phase is the preferred phase. The energy of the particles is mostly determined by temperature, so temperature is the main variable that determines what phase is stable at any given point.

What forces define intermolecular interactions? There are several. A force present in all substances with electrons is the dispersion force sometimes called the London dispersion force, after the physicist Fritz London, who first described this force in the early 1900s). This interaction is caused by the instantaneous position of an electron in a molecule, which temporarily makes that point of the molecule negatively charged and the rest of the molecule positively charged. In an instant, the electron is now somewhere else, but the fleeting imbalance of electric charge in the molecule allows molecules to interact with each other. As you might expect, the greater the number of electrons in a species, the stronger the dispersion force; this partially explains why smaller molecules are gases and larger molecules are liquids and solids at the same temperature. (Mass is a factor as well.)

Molecules with a permanent dipole moment experience dipole-dipole interactions, which are generally stronger than dispersion forces if all other things are equal. The oppositely charged ends of a polar molecule, which have partial charges on them, attract each other (Figure 10.1 “Dipole-Dipole Interactions”). Thus a polar molecule such CH2Cl2 has a significantly higher boiling point (313 K, or 40°C) than a nonpolar molecule like CF4 (145 K, or −128°C), even though it has a lower molar mass (85 g/mol vs. 88 g/mol).

An unusually strong form of dipole-dipole interaction is called hydrogen bonding. Hydrogen bonding is found in molecules with an H atom bonded to an N atom, an O atom, or an F atom. Such covalent bonds are very polar, and the dipole-dipole interaction between these bonds in two or more molecules is strong enough to create a new category of intermolecular force. Hydrogen bonding is the reason water has unusual properties. For such a small molecule (its molar mass is only 18 g/mol), H2O has relatively high melting and boiling points. Its boiling point is 373 K (100°C), while the boiling point of a similar molecule, H2S, is 233 K (−60°C). This is because H2O molecules experience hydrogen bonding, while H2S molecules do not. This strong attraction between H2O molecules requires additional energy to separate the molecules in the condensed phase, so its boiling point is higher than would be expected. Hydrogen bonding is also responsible for water’s ability as a solvent, its high heat capacity, and its ability to expand when freezing; the molecules line up in such a way that there is extra space between the molecules, increasing its volume in the solid state (Figure 11.2 “Hydrogen Bonding”).

When water solidifies, hydrogen bonding between the molecules forces the molecules to line up in a way that creates empty space between the molecules, increasing the overall volume of the solid. This is why ice is less dense than liquid water.

Example 1 Identify the most significant intermolecular force in each substance. C3H8 CH3OH H2S Solution Although C–H bonds are polar, they are only minimally polar. The most significant intermolecular force for this substance would be dispersion forces. This molecule has an H atom bonded to an O atom, so it will experience hydrogen bonding. Although this molecule does not experience hydrogen bonding, the Lewis electron dot diagram and VSEPR indicate that it is bent, so it has a permanent dipole. The most significant force in this substance is dipole-dipole interaction. Test Yourself Identify the most significant intermolecular force in each substance. HF HCl Answers hydrogen bonding dipole-dipole interactions

The preferred phase a substance adopts can change with temperature. At low temperatures, most substances are solids (only helium is predicted to be a liquid at absolute zero). As the temperature increases, those substances with very weak intermolecular forces become gases directly (in a process called sublimation, which will be discussed in Section 10.2 “Phase Transitions: Melting, Boiling, and Subliming”). Substances with weak interactions can become liquids as the temperature increases. As the temperature increases even more, the individual particles will have so much energy that the intermolecular forces are overcome, so the particles separate from each other, and the substance becomes a gas (assuming that their chemical bonds are not so weak that the compound decomposes from the high temperature). Although is it difficult to predict the temperature ranges for which solid, liquid, or gas is the preferred phase for any random substance, all substances progress from solid to liquid to gas in that order as temperature increases.

Key Takeaways

All substances experience dispersion forces between their particles.

Substances that are polar experience dipole-dipole interactions.

Substances with covalent bonds between an H atom and N, O, or F atoms experience hydrogen bonding.

The preferred phase of a substance depends on the strength of the intermolecular force and the energy of the particles.

Exercises

What type of intermolecular force do all substances have?

What is necessary for a molecule to experience dipole-dipole interactions?

What is necessary for a molecule to experience hydrogen bonding?

How does varying the temperature change the preferred phase of a substance?

Identify the strongest intermolecular force present in each substance.

a) He

b) CHCl3

c) HOF

6. Identify the strongest intermolecular force present in each substance.

a) CH3OH

b) (CH3)2CO

c) N2

7. Identify the strongest intermolecular force present in each substance.

a) HBr

b) C6H5NH2

c) CH4

8. Identify the strongest intermolecular force present in each substance.

a) C10H22

b) HF

c) glucose

Answers

1.

dispersion force

3.

An H atom must be bonded to an N, O, or F atom.

5.

a) dispersion forces

b) dipole-dipole interactions

c) hydrogen bonding

7.

a) dipole-dipole interactions

b) hydrogen bonding

c) dispersion forces

Chapter 77

11.2 Phase Transitions: Melting, Boiling, and Subliming

Learning Objectives

Describe what happens during a phase change.

Calculate the energy change needed for a phase change.

Substances can change phase—often because of a temperature change. At low temperatures, most substances are solid; as the temperature increases, they become liquid; at higher temperatures still, they become gaseous.

The process of a solid becoming a liquid is called melting (an older term that you may see sometimes is fusion). The opposite process, a liquid becoming a solid, is called solidification. For any pure substance, the temperature at which melting occurs—known as the melting point is a characteristic of that substance. It requires energy for a solid to melt into a liquid. Every pure substance has a certain amount of energy it needs to change from a solid to a liquid. This amount is called the enthalpy of fusion (or heat of fusion) of the substance, represented as ΔHfus. Some ΔHfus values are listed in Table 11.2 “Enthalpies of Fusion for Various Substances”; it is assumed that these values are for the melting point of the substance. Note that the unit of ΔHfus is kilojoules per mole, so we need to know the quantity of material to know how much energy is involved. The ΔHfus is always tabulated as a positive number. However, it can be used for both the melting and the solidification processes as long as you keep in mind that melting is always endothermic (so ΔH will be positive), while solidification is always exothermic (so ΔH will be negative).

Table 11.2 Enthalpies of Fusion for Various Substances

Substance (Melting Point)	Δ Hfus (kJ/mol)
Water (0°C)	6.01
Aluminum (660°C)	10.7
Benzene (5.5°C)	9.95
Ethanol (−114.3°C)	5.02
Mercury (−38.8°C)	2.29

Example 2 What is the energy change when 45.7 g of H2O melt at 0°C? Solution The ΔHfus of H2O is 6.01 kJ/mol. However, our quantity is given in units of grams, not moles, so the first step is to convert grams to moles using the molar mass of H2O, which is 18.0 g/mol. Then we can use ΔHfus as a conversion factor. Because the substance is melting, the process is endothermic, so the energy change will have a positive sign. 45.7 g H2O × (1 mol H2O/18.0 g H2O) × (6.01 kJ/ 1 mol H2O) = 15.3 kJ Without a sign, the number is assumed to be positive. Test Yourself What is the energy change when 108 g of C6H6 freeze at 5.5°C? Answer −13.8 kJ

During melting, energy goes exclusively to changing the phase of a substance; it does not go into changing the temperature of a substance. Hence melting is an isothermal process because a substance stays at the same temperature. Only when all of a substance is melted does any additional energy go to changing its temperature.

What happens when a solid becomes a liquid? In a solid, individual particles are stuck in place because the intermolecular forces cannot be overcome by the energy of the particles. When more energy is supplied (e.g., by raising the temperature), there comes a point at which the particles have enough energy to move around but not enough energy to separate. This is the liquid phase: particles are still in contact but are able to move around each other. This explains why liquids can assume the shape of their containers: the particles move around and, under the influence of gravity, fill the lowest volume possible (unless the liquid is in a zero-gravity environment—see Figure 11.3 “Liquids and Gravity”).

Liquids and Gravity. (a) A liquid fills the bottom of its container as it is drawn downward by gravity and the particles slide over each other. (b) A liquid floats in a zero- gravity environment. The particles still slide over each other because they are in the liquid phase, but now there is no gravity to pull them down. Source: “Glass of Water” by Derek Jensen is in the public domain; “Clayton Anderson zero g” s in the public domain because it was solely created by NASA.

The phase change between a liquid and a gas has some similarities to the phase change between a solid and a liquid. At a certain temperature, the particles in a liquid have enough energy to become a gas. The process of a liquid becoming a gas is called boiling (or vapourization), while the process of a gas becoming a liquid is called condensation. However, unlike the solid/liquid conversion process, the liquid/gas conversion process is noticeably affected by the surrounding pressure on the liquid because gases are strongly affected by pressure. This means that the temperature at which a liquid becomes a gas, the boiling point, can change with surrounding pressure. Therefore, we define the normal boiling point as the temperature at which a liquid changes to a gas when the surrounding pressure is exactly 1 atm, or 760 torr. Unless otherwise specified, it is assumed that a boiling point is for 1 atm of pressure.

Like the solid/liquid phase change, the liquid/gas phase change involves energy. The amount of energy required to convert a liquid to a gas is called the enthalpy of vapourization (or heat of vapourization), represented as ΔHvap. Some ΔHvap values are listed in Table 11.3 “Enthalpies of Vaporization for Various Substances”; it is assumed that these values are for the normal boiling point temperature of the substance, which is also given in the table. The unit for ΔHvap is also kilojoules per mole, so we need to know the quantity of material to know how much energy is involved. The ΔHvap is also always tabulated as a positive number. It can be used for both the boiling and the condensation processes as long as you keep in mind that boiling is always endothermic (so ΔH will be positive), while condensation is always exothermic (so ΔH will be negative).

Table 11.3 Enthalpies of Vaporization for Various Substances

Substance (Normal Boiling Point)	Δ Hvap (kJ/mol)
Water (100°C)	40.68
Bromine (59.5°C)	15.4
Benzene (80.1°C)	30.8
Ethanol (78.3°C)	38.6
Mercury (357°C)	59.23

Example 3 What is the energy change when 66.7 g of Br2(g) condense to a liquid at 59.5°C? Solution The ΔHvap of Br2 is 15.4 kJ/mol. Even though this is a condensation process, we can still use the numerical value of ΔHvap as long as we realize that we must take energy out, so the ΔH value will be negative. To determine the magnitude of the energy change, we must first convert the amount of Br2 to moles. Then we can use ΔHvap as a conversion factor. 66.7 g Br2× (1 mol Br2/159.8 g Br2) × (15.4 kJ/1 mol Br2) = 6.43 kJ Because the process is exothermic, the actual value will be negative: ΔH = −6.43 kJ. Test Yourself What is the energy change when 822 g of C2H5OH(ℓ) boil at its normal boiling point of 78.3°C? Answer 689 kJ

As with melting, the energy in boiling goes exclusively to changing the phase of a substance; it does not go into changing the temperature of a substance. So boiling is also an isothermal process. Only when all of a substance has boiled does any additional energy go to changing its temperature.

What happens when a liquid becomes a gas? We have already established that a liquid is composed of particles in contact with each other. When a liquid becomes a gas, the particles separate from each other, with each particle going its own way in space. This is how gases tend to fill their containers. Indeed, in the gas phase most of the volume is empty space; only about 1/1,000th of the volume is actually taken up by matter (Figure 11.4 “Liquids and Gases”). It is this property of gases that explains why they can be compressed, a fact that is considered in Chapter 6 “Gases”.

In (a), the particles are a liquid; the particles are in contact but are also able to move around each other. In (b), the particles are a gas, and most of the volume is actually empty space. The particles are not to scale; in reality, the dots representing the particles would be about 1/100th the size as depicted.

Under some circumstances, the solid phase can transition directly to the gas phase without going through a liquid phase, and a gas can directly become a solid. The solid-to-gas change is called sublimation, while the reverse process is called deposition. Sublimation is isothermal, like the other phase changes. There is a measurable energy change during sublimation; this energy change is called the enthalpy of sublimation, represented as Δ. The relationship between the ΔHsub and the other enthalpy changes is as follows:

ΔHsub = ΔHfus + ΔHvap

As such, ΔHsub is not always tabulated because it can be simply calculated from ΔHfus and ΔHvap.

There are several common examples of sublimation. A well-known product—dry ice—is actually solid CO2. Dry ice is dry because it sublimes, with the solid bypassing the liquid phase and going straight to the gas phase. The sublimation occurs at temperature of −77°C, so it must be handled with caution. If you have ever noticed that ice cubes in a freezer tend to get smaller over time, it is because the solid water is very slowly subliming. “Freezer burn” isn’t actually a burn; it occurs when certain foods, such as meats, slowly lose solid water content because of sublimation. The food is still good but looks unappetizing. Reducing the temperature of a freezer will slow the sublimation of solid water.

Chemical equations can be used to represent a phase change. In such cases, it is crucial to use phase labels on the substances. For example, the chemical equation for the melting of ice to make liquid water is as follows:

H2O(s) → H2O(ℓ)

No chemical change is taking place; however, a physical change is taking place.

Heating Curves

A plot of the temperature versus the amount of heat added is known as a heating curve (Figure 11.5). These are commonly used to visually show the relationship between phase changes and enthalpy for a given substance.

In Figure 11.5, the solid gains kinetic energy and consequently rises in temperature as heat is added. At the melting point, the heat added is used to break the attractive intermolecular forces of the solid instead of increasing kinetic energy, and therefore the temperature remains constant. After all the solid has melted, once again, the heat added goes to increasing the kinetic energy (and temperature) of the liquid molecules until the boiling point. At the boiling point, once again, the heat added is used to break the attractive intermolecular forces instead of supplying kinetic energy, and the temperature remains constant until all liquid has been turned to gas.

Key Takeaways

Phase changes can occur between any two phases of matter.

All phase changes occur with a simultaneous change in energy.

All phase changes are isothermal.

Exercises

What is the difference between melting and solidification?

What is the difference between boiling and condensation?

Describe the molecular changes when a solid becomes a liquid.

Describe the molecular changes when a liquid becomes a gas.

What is the energy change when 78.0 g of Hg melt at −38.8°C?

What is the energy change when 30.8 g of Al solidify at 660°C?

What is the energy change when 111 g of Br2 boil at 59.5°C?

What is the energy change when 98.6 g of H2O condense at 100°C?

Each of the following statements is incorrect. Rewrite them so they are correct.

a) Temperature changes during a phase change.

b) The process of a liquid becoming a gas is called sublimation.

10. Each of the following statements is incorrect. Rewrite them so they are correct.

a) The volume of a gas contains only about 10% matter, with the rest being empty space.

b) ΔHsub is equal to ΔHvap.

11. Write the chemical equation for the melting of elemental sodium.

12. Write the chemical equation for the solidification of benzene (C6H6).

13. Write the chemical equation for the sublimation of CO2.

14. Write the chemical equation for the boiling of propanol (C3H7OH).

What is the ΔHsub of H2O? (Hint: see Table 11.2 “Enthalpies of Fusion for Various Substances” and Table 11.3 “Enthalpies of Vaporization for Various Substances”.)

The ΔHsub of I2 is 60.46 kJ/mol, while its ΔHvap is 41.71 kJ/mol. What is the ΔHfus of I2?

Answers

1.

Melting is the phase change from a solid to a liquid, whereas solidification is the phase change from a liquid to a solid.

3.

The molecules have enough energy to move about each other but not enough to completely separate from each other.

5.

890 J

7.

10.7 kJ

9.

a) Temperature does not change during a phase change.

b) The process of a liquid becoming a gas is called boiling; the process of a solid becoming a gas is called sublimation.

11.

Na(s) → Na(ℓ)
13.

CO2(s) → CO2(g)
15.

46.69 kJ/mol

Chapter 78

11.3 Properties of Liquids

Learning Objectives

Define the vapour pressure of liquids.

Explain the origin of both surface tension and capillary action.

There are some properties that all liquids have. The liquid that we are most familiar with is probably water, and it has these properties. Other liquids have them as well, which is something to keep in mind.

All liquids have a certain portion of their particles having enough energy to enter the gas phase, and if these particles are at the surface of the liquid, they do so (Figure 10.6 “Evapouration”). The formation of a gas from a liquid at temperatures below the boiling point is called evapouration. At these temperatures, the material in the gas phase is called vapour, rather than gas; the term gas is reserved for when the gas phase is the stable phase.

Some particles of a liquid have enough energy to escape the liquid phase to become a vapour.

If the available volume is large enough, eventually all the liquid will become vapour. But if the available volume is not enough, eventually some of the vapour particles will reenter the liquid phase (Figure 10.7 “Equilibrium”). At some point, the number of particles entering the vapour phase will equal the number of particles leaving the vapour phase, so there is no net change in the amount of vapour in the system. We say that the system is at equilibrium. The partial pressure of the vapour at equilibrium is called the vapour pressure of the liquid.

At some point, the number of particles entering the vapour phase will be balanced by the number of particles returning to the liquid. This point is called equilibrium.

Understand that the liquid has not stopped evapourating. The reverse process—condensation—is occurring as fast as evapouration is, so there is no net change in the amount of vapour in the system. The term dynamic equilibrium represents a situation in which a process still occurs, but the opposite process also occurs at the same rate so that there is no net change in the system.

The vapour pressure for a substance is dependent on the temperature of the substance; as the temperature increases, so does the vapour pressure. Figure 10.8 “Plots of Vapor Pressure versus Temperature for Several Liquids” is a plot of vapour pressure versus temperature for several liquids. Having defined vapour pressure, we can also redefine the boiling point of a liquid: the temperature at which the vapour pressure of a liquid equals the surrounding environmental pressure. The normal vapour pressure, then, is the temperature at which the vapour pressure is 760 torr, or exactly 1 atm. Thus boiling points vary with surrounding pressure, a fact that can have large implications on cooking foods at lower- or higher-than-normal elevations. Atmospheric pressure varies significantly with altitude.

The vapour pressure of a liquid depends on the identity of the liquid and the temperature, as this plot shows.

Example 4 Use Figure 10.8 “Plots of Vapor Pressure versus Temperature for Several Liquids” to estimate the boiling point of water at 500 torr, which is the approximate atmospheric pressure at the top of Mount Everest. Solution See the accompanying figure. Five hundred torr is between 400 and 600, so we extend a line from that point on the y-axis across to the curve for water and then drop it down to the x-axis to read the associated temperature. It looks like the point on the water vapour pressure curve corresponds to a temperature of about 90°C, so we conclude that the boiling point of water at 500 torr is 90°C. Figure 10.9 Using Figure 10.8 “Plots of Vapor Pressure versus Temperature for Several Liquids” to Answer Example 4 By reading the graph properly, you can estimate the boiling point of a liquid at different temperatures. Test Yourself Use Figure 10.8 “Plots of Vapor Pressure versus Temperature for Several Liquids” to estimate the boiling point of ethanol at 400 torr. Answer about 65°C

The vapour pressure curve for water is not exactly zero at the melting point—0°C. Even ice has a vapour pressure; that is why it sublimes over time. However, the vapour pressures of solids are typically much lower than that of liquids. At −1°C, the vapour pressure of ice is 4.2 torr. At a freezer temperature of 0°F (−17°C), the vapour pressure of ice is only 1.0 torr; so-called deep freezers can get down to −23°C, where the vapour pressure of ice is only 0.6 torr.

Phase diagrams

A phase diagram is a graphical representation of the equilibrium relationships that exist between the phases of a substance under specified pressures and temperatures (Figure 10.10). The phase diagram is a combination of three curves: the vapour pressure curve, the melting curve and the sublimation curve. We have previously seen that vapour pressure curves represent the equilibrium between the liquid and gas phase, and the point at which the pressure equals 1 atm is the normal boiling point. One additional feature of this curve in the phase diagram (green), is that it ends at the critical point. The critical point is the point at the highest temperature and pressure at which liquids and gases remain distinguishable. At temperatures and pressure beyond this point the matter exists in a phase with properties of both liquids and gases known as a supercritical fluid.

The melting curve (orange) represents the equilibrium between solid and liquid, and the point at which the pressure equals 1 atm is the normal melting point. The sublimation curve (blue) represents the equilibrium which exists between solid and gas. Finally, the point where all three curves meet is known as the triple point. At this point, three phases (solid, liquid and gas) all exist at equilibrium.

Example 5 Using the following phase diagram, determine what would happen if: a. The temperature is increased for matter at point 1. b. The pressure is increased for matter at point 3. Solution: a. Matter at point 1 will melt (change phase from solid to liquid) if the temperature is increased. b. Matter at point 3 will condense (change phase from gas to liquid) if the temperature is increased.

Surface Tension and Capillary Action

All liquids share some other properties as well. Surface tension is an effect caused by an imbalance of forces on the atoms at the surface of a liquid, as shown in Figure 10.11 “Surface Tension”. The blue particle in the bulk of the liquid experiences intermolecular forces from all around, as illustrated by the arrows. However, the yellow particle on the surface does not experience any forces above it because there are no particles above it. This leads to an imbalance of forces that we call surface tension.

Surface tension comes from the fact that particles at the surface of a liquid do not experience interactions from all directions, leading to an imbalance of forces on the surface.

Figure 10.12 Effects of Surface Tension. Water on the surface of this apple beads up due to the effect of surface tension.

Source: “wet apple” by cristian ruberti is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 2.0 Generic.

Surface tension is responsible for several well-known behaviours of liquids, including water. Liquids with high surface tension tend to bead up when present in small amounts (Figure 10.12 “Effects of Surface Tension”). Surface tension causes liquids to form spheres in free fall or zero gravity (see Figure 10.3 “Liquids and Gravity”: the “floating” water isn’t in the shape of a sphere by accident; it is the result of surface tension). Surface tension is also responsible for the fact that small insects can “walk” on water. Because of surface tension, it takes energy to break the surface of a liquid, and if an object (such as an insect) is light enough, there is not enough force due to gravity for the object to break through the surface, so the object stays on top of the water (Figure 10.13 “Walking on Water”). Carefully done, this phenomenon can also be illustrated with a thin razor blade or a paper clip.

Walking on Water. Small insects can actually walk on top of water because of surface tension effects.

Source: “Water Slider” by Orest Shvadchak is licensed under the Creative Commons Attribution-ShareAlike 2.0 Generic.

The fact that small droplets of water bead up on surfaces does not mean that water—or any other liquid—does not interact with other substances. Sometimes the attraction can be very strong. Adhesion is the tendency of a substance to interact with other substances because of intermolecular forces, while cohesion is the tendency of a substance to interact with itself. If cohesive forces within a liquid are stronger than adhesive forces between a liquid and another substance, then the liquid tends to keep to itself; it will bead up. However, if adhesive forces between a liquid and another substance are stronger than cohesive forces, then the liquid will spread out over the other substance, trying to maximize the interface between the other substance and the liquid. We say that the liquid wets the other substance.

Adhesion and cohesion are important for other phenomena as well. In particular, if adhesive forces are strong, then when a liquid is introduced to a small-diameter tube of another substance, the liquid moves up or down in the tube, as if ignoring gravity. Because tiny tubes are called capillaries, this phenomenon is called capillary action. For example, one type of capillary action—capillary rise—is seen when water or water-based liquids rise up in thin glass tubes (like the capillaries sometimes used in blood tests), forming an upwardly curved surface called a meniscus. Capillary action is also responsible for the “wicking” effect that towels and sponges use to dry wet objects; the matting of fibres forms tiny capillaries that have good adhesion with water. Cotton is a good material for this; polyester and other synthetic fabrics do not display similar capillary action, which is why you seldom find rayon bath towels. A similar effect is observed with liquid fuels or melted wax and their wicks. Capillary action is thought to be at least partially responsible for transporting water from the roots to the tops of trees, even tall ones.

On the other hand, some liquids have stronger cohesive forces than adhesive forces. In this case, in the presence of a capillary, the liquid is forced down from its surface; this is an example of a type of capillary action called capillary depression. In this case, the meniscus curves downward. Mercury has very strong cohesive forces; when a capillary is placed in a pool of mercury, the surface of the mercury liquid is depressed (Figure 10.14 “Capillary Action”).

Chemistry Is Everywhere: Waxing a Car

Responsible car owners are encouraged to wax their cars regularly. In addition to making the car look nicer, it also helps protect the surface, especially if the surface is metal. Why?

The answer has to do with cohesion and adhesion (and, to a lesser extent, rust). Water is an important factor in the rusting of iron, sometimes used extensively in outer car bodies. Keeping water away from the metal is one way to minimize rusting. A coat of paint helps with this. However, dirty or scratched paint can attract water, and adhesive forces will allow the water to wet the surface, maximizing its contact with the metal and promoting rust.

Wax is composed of long hydrocarbon molecules that do not interact well with water. (Hydrocarbons are compounds with C and H atoms; for more information on hydrocarbons, see Chapter 16 “Organic Chemistry”.) That is, a thin layer of wax will not be wetted by water. A freshly waxed car has low adhesive forces with water, so water beads up on the surface, as a consequence of its cohesion and surface tension. This minimizes the contact between water and metal, thus minimizing rust.

Droplets of water on a freshly waxed car do not wet the car well because of low adhesion between water and the waxed surface. This helps protect the car from rust.

“Wet Red Car 1′′ by Rob Innes is licensed under the Creative Commons Attribution-NonCommercial-NoDerivs 2.0 Generic.

Key Takeaways

All liquids evapourate.

If volume is limited, evapouration eventually reaches a dynamic equilibrium, and a constant vapour pressure is maintained.

All liquids experience surface tension, an imbalance of forces at the surface of the liquid.

All liquids experience capillary action, demonstrating either capillary rise or capillary depression in the presence of other substances.

Exercises

What is the difference between evapouration and boiling?

What is the difference between a gas and vapour?

Define normal boiling point in terms of vapour pressure.

Is the boiling point higher or lower at higher environmental pressures? Explain your answer.

Referring to Figure 10.9 “Plots of Vapor Pressure versus Temperature for Several Liquids”, if the pressure is 400 torr, which liquid boils at the lowest temperature?

Referring to Figure 10.9 “Plots of Vapor Pressure versus Temperature for Several Liquids”, if the pressure is 100 torr, which liquid boils at the highest temperature?

Referring to Figure 10.9 “Plots of Vapor Pressure versus Temperature for Several Liquids”, estimate the boiling point of ethanol at 200 torr.

Referring to Figure 10.9 “Plots of Vapor Pressure versus Temperature for Several Liquids”, at approximately what pressure is the boiling point of water 40°C?

Explain how surface tension works.

From what you know of intermolecular forces, which substance do you think might have a higher surface tension—ethyl alcohol or mercury? Why?

Under what conditions would a liquid demonstrate a capillary rise?

12. Under what conditions would a liquid demonstrate a capillary depression?

13. Using the phase diagram from the example question earlier in this section, what state of matter is depicted by point 4? How could you change matter at point 2 to the gas phase?

Answers

1.

Evapouration occurs when a liquid becomes a gas at temperatures below that liquid’s boiling point, whereas boiling is the conversion of a liquid to a gas at the liquid’s boiling point.

3.

the temperature at which the vapour pressure of a liquid is 760 torr

5.

diethyl ether

7.

48°C

9.

Surface tension is an imbalance of attractive forces between liquid molecules at the surface of a liquid.

11.

Adhesion must be greater than cohesion.

13.

Point 4 represents the supercritical fluid state. Matter at point 2 could be changed to the gas phase by either decreasing the pressure, or increasing the temperature.

Chapter 79

11.4 Solids

Learning Objectives

Describe the general properties of a solid.

Describe the six different types of solids.

A solid is like a liquid in that particles are in contact with each other. Solids are unlike liquids in that the intermolecular forces are strong enough to hold the particles in place. At low enough temperatures, all substances are solids (helium is the lone exception), but the temperature at which the solid state becomes the stable phase varies widely among substances, from 20 K (−253°C) for hydrogen to over 3,900 K (3,600°C) for carbon.

The solid phase has several characteristics. First, solids maintain their shape. They do not fill their entire containers like gases do, and they do not adopt the shape of their containers like liquids do. They cannot be easily compressed like gases can, and they have relatively high densities.

Solids may also demonstrate a variety of properties. For example, many metals can be beaten into thin sheets or drawn into wires, while compounds such as NaCl will shatter if they are struck. Some metals, such as sodium and potassium, are rather soft, while others, such as diamond, are very hard and can easily scratch other substances. Appearances differ as well: most metals are shiny and silvery, but sulfur (a nonmetal) is yellow, and ionic compounds can take on a rainbow of colors. Solid metals conduct electricity and heat, while ionic solids do not. Many solids are opaque, but some are transparent. Some dissolve in water, but some do not. Figure 10.15 “Properties of Solids” shows two solids that exemplify the similar and dissimilar properties of solids.

Properties of Solids. a) Sodium metal is silvery, soft, and opaque and conducts electricity and heat well. (b) NaCl is transparent, hard, and colorless and does not conduct electricity or heat well in the solid state. These two substances illustrate the range of properties that solids can have.

Source: “Sodium” by Mrs Pugliano is licensed under the Creative Commons Attribution-ShareAlike 2.0 Generic; “Halite(Salt)” is in the public domain;

Solids can have a wide variety of physical properties because there are different types of solids. Here we will review the different types of solids and the bonding that gives them their properties.

First, we must distinguish between two general types of solids. An amorphous solid is a solid with no long-term structure or repetition. Examples include glass and many plastics, both of which are composed of long chains of molecules with no order from one molecule to the next. A crystalline solid is a solid that has a regular, repeating three-dimensional structure. A crystal of NaCl (see Figure 10.15 “Properties of Solids”) is one example: at the atomic level, NaCl is composed of a regular three-dimensional array of Na+ ions and Cl− ions.

There is only one type of amorphous solid. However, there are several different types of crystalline solids, depending on the identity of the units that compose the crystal.

An ionic solid is a crystalline solid composed of ions (even if the ions are polyatomic). NaCl is an example of an ionic solid (Figure 10.16 “An Ionic Solid”). The Na+ ions and Cl− ions alternate in three dimensions, repeating a pattern that goes on throughout the sample. The ions are held together by the attraction of opposite charges—a very strong force. Hence most ionic solids have relatively high melting points; for example, the melting point of NaCl is 801°C. Ionic solids are typically very brittle. To break them, the very strong ionic attractions need to be broken; a displacement of only about 1 × 10−10 m will move ions next to ions of the same charge, which results in repulsion. Ionic solids do not conduct electricity in their solid state; however, in the liquid state and when dissolved in some solvent, they do conduct electricity. This fact originally promoted the idea that some substances exist as ionic particles.

NaCl is a solid composed of a three-dimensional array of alternating Na+ ions (green) and Cl− ions (purple) held together by the attraction of opposite charges.

A molecular solid is a crystalline solid whose components are covalently bonded molecules. Many molecular substances, especially when carefully solidified from the liquid state, form solids where the molecules line up with a regular fashion similar to an ionic crystal, but they are composed of molecules instead of ions. Because the intermolecular forces between molecules are typically less strong than in ionic solids, molecular solids typically melt at lower temperatures and are softer than ionic solids. Ice is an example of a molecular solid. In the solid state, the molecules line up in a regular pattern (Figure 10.17 “Molecular Solids”). Some very large molecules, such as biological molecules, will form crystals only if they are very carefully solidified from the liquid state or, more usually, from a dissolved state; otherwise, they will form amorphous solids.

Water molecules line up in a regular pattern to form molecular solids. The dotted lines show how the polar O–H covalent bonds in one molecule engage in hydrogen bonding with other molecules. The O atoms are red, and the H atoms are white.

Some solids are composed of atoms of one or more elements that are covalently bonded together in a seemingly never-ending fashion. Such solids are called covalent network solids. Each piece of the substance is essentially one huge molecule, as the covalent bonding in the crystal extends throughout the entire crystal. The two most commonly known covalent network solids are carbon in its diamond form and silicon dioxide (SiO2). Figure 10.18 “Covalent Network Solids” shows the bonding in a covalent network solid. Generally, covalent network solids are poor conductors of electricity, although their ability to conduct heat is variable: diamond is one of the most thermally conductive substances known, while SiO2 is about 100 times less thermally conductive. Most covalent network solids are very hard, as exemplified by diamond, which is the hardest known substance. Covalent network solids have high melting points by virtue of their network of covalent bonds, all of which would have to be broken for them to transform into a liquid. Indeed, covalent network solids are among the highest-melting substances known: the melting point of diamond is over 3,500°C, while the melting point of SiO2 is around 1,650°C. These characteristics are explained by the network of covalent bonds throughout the sample.

Diamond is a covalent network solid, with each C atom making four covalent bonds to four other C atoms. A diamond is essentially one huge molecule.

A metallic solid is a solid with the characteristic properties of a metal: shiny and silvery in color and a good conductor of heat and electricity. A metallic solid can also be hammered into sheets and pulled into wires. A metallic solid exhibits metallic bonding, a type of intermolecular interaction caused by the sharing of the s valence electrons by all atoms in the sample. It is the sharing of these valence electrons that explains the ability of metals to conduct electricity and heat well. It is also relatively easy for metals to lose these valence electrons, which explains why metallic elements usually form cations when they make compounds.

Example 6 Predict the type of crystal exhibited by each solid. MgO Ag CO2 Solution A combination of a metal and a nonmetal makes an ionic compound, so MgO would exist as ionic crystals in the solid state. Silver is a metal, so it would exist as a metallic solid in the solid state. CO2 is a covalently bonded molecular compound. In the solid state, it would form molecular crystals. (You can actually see the crystals in dry ice with the naked eye.) Test Yourself Predict the type of crystal exhibited by each solid. I2 Ca(NO3)2 Answers molecular crystals ionic crystals

Food and Drink App: The Rocks We Eat

The foods and beverages we eat and drink all have different phases: solid, liquid, and gas. (How do we ingest gases? Carbonated beverages have gas, which sometimes cause a person to belch.) However, among the solids we eat, three in particular are, or are produced from, rocks. Yes, rocks!

The first one is NaCl, or common salt. Salt is the only solid that we ingest that is actually mined as a rock (hence the term rock salt; it really is a rock). Salt provides both Na+ ions and Cl− ions, both of which are necessary for good health. Salt preserves food, a function that was much more important before the days of modern food preparation and storage. The fact that saltiness is one of the major tastes the tongue can detect suggests a strong evolutionary link between ingesting salt and survival. There is some concern today that there is too much salt in the diet; it is estimated that the average person consumes at least three times as much salt daily than is necessary for proper bodily function.

The other two rocks we eat are related: sodium bicarbonate (NaHCO3) and sodium carbonate (Na2CO3). However, we do not mine these substances directly from the ground; we mine trona, whose chemical formula is Na3H(CO3)2. This substance is dissolved in water and treated with CO2 gas to make either Na2CO3 or NaHCO3. Another process, called the Solvay process, is also used to make Na2CO3. In the Solvay process, NH3 and CO2 are added to solutions of NaCl to make NaHCO3 and NH4Cl; the NaHCO3 precipitates and is heated to produce Na2CO3. Either way, we get these two products from the ground (i.e., rocks).

NaHCO3 is also known as baking soda, which is used in many baked goods. Na2CO3 is used in foods to regulate the acid balance. It is also used in laundry (where it is called washing soda) to interact with other ions in water that tend to reduce detergent efficiency.

Key Takeaways

Solids can be divided into amorphous solids and crystalline solids.

Crystalline solids can be ionic, molecular, covalent network, or metallic.

Exercises

What is the difference between a crystalline solid and an amorphous solid?

What two properties do solids have in common? What two properties of solids can vary?

Explain how the bonding in an ionic solid explains some of the properties of these solids.

Explain how the bonding in a molecular solid explains some of the properties of these solids.

Explain how the bonding in a covalent network solid explains some of the properties of these solids.

Explain how the bonding in a metallic solid explains some of the properties of these solids.

Which type(s) of solid has/have high melting points?

Which type(s) of solid conduct(s) electricity in their solid state? In their liquid state?

Which type of solid(s) is/are considered relatively soft?

Which type of solid(s) is/are considered very hard?

Predict the type of solid exhibited by each substance.

a) Hg

b) PH3

c) CaF2

12. Predict the type of solid exhibited by each substance.

a) (CH2)n (polyethylene, a form of plastic)

b) PCl3

c) NH4Cl

13. Predict the type of solid exhibited by each substance.

a) SO3

b) Br2

c) Na2SO3

14. Predict the type of solid exhibited by each substance.

a) BN (boron nitride, a diamond-like compound)

b) B2O3

c) NaBF4

15. Predict the type of solid exhibited by each substance.

a) H2S

b) Si

c) CsF

16. Predict the type of solid exhibited by each substance.

a) Co

b) CO

c) CaCO3

Answers

1.

At the atomic level, a crystalline solid has a regular arrangement of atoms, whereas an amorphous solid has a random arrangement of atoms.

3.

The oppositely charged ions are very strongly held together, so ionic crystals have high melting points. Ionic crystals are also brittle because any distortion of the crystal moves same-charged ions closer to each other, so they repel.

5.

The covalent network solid is essentially one molecule, making it very hard and giving it a very high melting point.

7.

ionic solids, covalent network solids

9.

molecular solids

11.

a) metallic

b) molecular solid

c) ionic crystal

13.

a) molecular solid

b) molecular solid

c) ionic crystal

15.

a) molecular solid

c) ionic crystal

Chapter 80

11.5 End-of-Chapter Material

Additional Exercises

All other things being equal, rank the intermolecular forces in order of increasing strength.

Which subatomic particles (protons, neutrons, electrons) are most responsible for intermolecular forces? Explain your answer.

Can a molecule experience more than one intermolecular force at the same time? Why or why not?

Of the properties boiling point, structure of the solid phase, and molar mass, which are influenced by hydrogen bonding? Explain your answer.

How many grams of solid water can be melted with 1.55 kJ of energy?

How many grams of Hg can be vapourized using 29,330 J of energy?

Another way to minimize freezer burn is to wrap food tightly before freezing. Why would this minimize freezer burn?

The ΔHsub of naphthalene (C10H8) is 72.6 kJ/mol. What energy is needed to sublime 100.0 g of C10H8?

Which do you think would have a higher surface tension—liquid neon or liquid krypton? Explain your answer.

Under what condition would a liquid not show either capillary rise or capillary depression?

Answers

dispersion forces < dipole-dipole interactions < hydrogen bonding < ionic bonding

3.

Yes, but one intermolecular force usually dominates.

5.

4.64 g

7.

Water in the vapour phase has no space to evapourate into.

9.

liquid krypton because it would have stronger dispersion forces

Chapter 81

Chapter 12. Solutions

Introduction to Solutions

More than 70% of the earth’s surface is covered by a very important solution—seawater. It is likely that without seawater, no life would exist on Earth.

At its simplest, seawater is mostly H2O. But about 3.5% of seawater is dissolved solids, mostly NaCl but other ions as well. Table 11.1 “Percentage by Mass of Ions in Seawater and Blood” lists the percentage by mass of the various ions in seawater.

Because it is highly likely that life on Earth originated in the oceans, it should not be surprising that many bodily fluids resemble seawater—especially blood. Table 12.1 “Percentage by Mass of Ions in Seawater and Blood” also lists the percentage by mass of ions in a typical sample of blood.

Table 12.1 Percentage by Mass of Ions in Seawater and Blood

Ion	Percentage in Seawater	Percentage in Blood
Na +	2.36	0.322
Cl −	1.94	0.366
Mg 2+	0.13	0.002
SO 42−	0.09	—
K +	0.04	0.016
Ca 2+	0.04	0.0096
HCO 3−	0.002	0.165
HPO 42− , H 2 PO 4−	—	0.01

Most ions are more abundant in seawater than they are in blood, with some notable exceptions. There is far more hydrogen carbonate ion (HCO3−) in blood than in seawater; indeed, it is the third most common ion in blood. This difference is significant because the HCO3− ion and some related species [CO32−, CO2(aq)] have an important role in controlling the acid-base properties of blood. Although there is a negligible amount of the two hydrogen phosphate ions (HPO42− and H2PO4−) in seawater, there is a small amount in blood, where these ions affect acid-base properties. Another notable difference is that blood has a negligible amount of the sulfate ion (SO42−), but this ion is present in seawater.

Gold is present in seawater—but only a tiny amount. A current estimate of the amount of gold is about 1 part per every 1 × 1013 parts of seawater, which makes the extraction of gold from seawater unfeasible. However, it does mean that there are about 1.4 × 1014 g of gold in the world’s oceans!

A solution is a homogeneous mixture—a mixture of two or more substances that are so intimately mixed that the mixture behaves in many ways like a single substance. Many chemical reactions occur when the reactants are dissolved in solution. In this chapter, we will introduce concepts that are applicable to solutions and the chemical reactions that occur in them.

Chapter 82

12.1 Some Definitions

Learning Objectives

Learn some terminology involving solutions.

Recognize which terminology is qualitative and which terminology is quantitative.

Explain why certain substances dissolve in other substances.

The major component of a solution is called the solvent. The minor component of a solution is called the solute. By major and minor we mean whichever component has the greater presence by mass or by moles. Sometimes this becomes confusing, especially with substances with very different molar masses. However, here we will confine the discussion to solutions for which the major component and the minor component are obvious.

Solutions exist for every possible phase of the solute and the solvent. Salt water, for example, is a solution of solid NaCl in liquid water; soda water is a solution of gaseous CO2 in liquid water, while air is a solution of a gaseous solute (O2) in a gaseous solvent (N2). In all cases, however, the overall phase of the solution is the same phase as the solvent.

Example 1 A solution is made by dissolving 1.00 g of sucrose (C12H22O11) in 100.0 g of liquid water. Identify the solvent and solute in the resulting solution. Solution Either by mass or by moles, the obvious minor component is sucrose, so it is the solute. Water—the majority component—is the solvent. The fact that the resulting solution is the same phase as water also suggests that water is the solvent. Test Yourself A solution is made by dissolving 3.33 g of HCl(g) in 40.0 g of liquid methyl alcohol (CH3OH). Identify the solvent and solute in the resulting solution. Answer solute: HCl(g); solvent: CH3OH

One important concept of solutions is in defining how much solute is dissolved in a given amount of solvent. This concept is called concentration. Various words are used to describe the relative amounts of solute. Dilute describes a solution that has very little solute, while concentrated. describes a solution that has a lot of solute. One problem is that these terms are qualitative; they describe more or less but not exactly how much.

In most cases, only a certain maximum amount of solute can be dissolved in a given amount of solvent. This maximum amount is called the solubility of the solute. It is usually expressed in terms of the amount of solute that can dissolve in 100 g of the solvent at a given temperature. Table 12.2 “Solubilities of Some Ionic Compounds” lists the solubilities of some simple ionic compounds. These solubilities vary widely: NaCl can dissolve up to 31.6 g per 100 g of H2O, while AgCl can dissolve only 0.00019 g per 100 g of H2O.

Table 12.2 Solubilities of Some Ionic Compounds

Solute	Solubility (g per 100 g of H 2 O at 25°C)
AgCl	0.00019
CaCO 3	0.0006
KBr	70.7
NaCl	36.1
NaNO 3	94.6

When the maximum amount of solute has been dissolved in a given amount of solvent, we say that the solution is saturated with solute. When less than the maximum amount of solute is dissolved in a given amount of solute, the solution is unsaturated. These terms are also qualitative terms because each solute has its own solubility. A solution of 0.00019 g of AgCl per 100 g of H2O may be saturated, but with so little solute dissolved, it is also rather dilute. A solution of 36.1 g of NaCl in 100 g of H2O is also saturated but rather concentrated. Ideally, we need more precise ways of specifying the amount of solute in a solution. We will introduce such ways in Section 12.2 “Quantitative Units of Concentration”.

In some circumstances, it is possible to dissolve more than the maximum amount of a solute in a solution. Usually, this happens by heating the solvent, dissolving more solute than would normally dissolve at regular temperatures, and letting the solution cool down slowly and carefully. Such solutions are called supersaturated solutions and are not stable; given an opportunity (such as dropping a crystal of solute in the solution), the excess solute will precipitate from the solution.

It should be obvious that some solutes dissolve in certain solvents but not others. NaCl, for example, dissolves in water but not in vegetable oil. Beeswax dissolves in liquid hexane but not water. What is it that makes a solute soluble in some solvents but not others?

The answer is intermolecular interactions. The intermolecular interactions include London dispersion forces, dipole-dipole interactions, and hydrogen bonding (as described in Chapter 10 “Solids and Liquids”). From experimental studies, it has been determined that if molecules of a solute experience the same intermolecular forces that the solvent does, the solute will likely dissolve in that solvent. So, NaCl—a very polar substance because it is composed of ions—dissolves in water, which is very polar, but not in oil, which is generally nonpolar. Nonpolar wax dissolves in nonpolar hexane but not in polar water. This concept leads to the general rule that “like dissolves like” for predicting whether a solute is soluble in a given solvent. However, this is a general rule, not an absolute statement, so it must be applied with care.

Example 2 Would I2 be more soluble in CCl4 or H2O? Explain your answer. Solution I2 is nonpolar. Of the two solvents, CCl4 is nonpolar and H2O is polar, so I2 would be expected to be more soluble in CCl4. Test Yourself Would C3H7OH be more soluble in CCl4 or H2O? Explain your answer. Answer H2O because both experience hydrogen bonding

Key Takeaways

Solutions are composed of a solvent (major component) and a solute (minor component).

Concentration is the expression of the amount of solute in a given amount of solvent and can be described by several qualitative terms.

Solubility is a specific amount of solute that can dissolve in a given amount of solvent.

“Like dissolves like” is a useful rule for deciding if a solute will be soluble in a solvent.

Exercises

Define solute and solvent.

Define saturated, unsaturated, and supersaturated.

A solution is prepared by combining 2.09 g of CO2 and 35.5 g of H2O. Identify the solute and solvent.

A solution is prepared by combining 10.3 g of Hg(ℓ) and 45.0 g of Ag(s). Identify the solute and solvent.

Use Table 12.2 “Solubilities of Some Ionic Compounds” to decide if a solution containing 45.0 g of NaCl per 100 g of H2O is unsaturated, saturated, or supersaturated.

Use Table 11.2 “Solubilities of Some Ionic Compounds” to decide if a solution containing 0.000092 g of AgCl per 100 g of H2O is unsaturated, saturated, or supersaturated.

Would the solution in Exercise 5 be described as dilute or concentrated? Explain your answer.

Would the solution in Exercise 6 be described as dilute or concentrated? Explain your answer.

Identify a solute from Table 12.2 “Solubilities of Some Ionic Compounds” whose saturated solution can be described as dilute.

Identify a solute from Table 12.2 “Solubilities of Some Ionic Compounds” whose saturated solution can be described as concentrated.

Which solvent is Br2 more likely soluble in—CH3OH or C6H6?

Which solvent is NaOH more likely soluble in—CH3OH or C6H6?

Compounds with the formula CnH2n + 1OH are soluble in H2O when n is small but not when n is large. Suggest an explanation for this phenomenon.

Glucose has the following structure:

What parts of the molecule indicate that this substance is soluble in water?

Answers

1.

The solvent is the majority component of a solution, whereas the solute is the minority component of a solution.

3.

solute: CO2; solvent: H2O

5.

supersaturated

7.

concentrated because there is a lot of solute

9.

AgCl or CaCO3

11.

C6H6

13.

The nonpolar end dominates intermolecular forces when n is large.

Chapter 83

12.2 Quantitative Units of Concentration

Learning Objective

Learn to determine specific concentrations with several common units.

Rather than qualitative terms (Section 12.1 “Some Definitions”), we need quantitative ways to express the amount of solute in a solution; that is, we need specific units of concentration. In this section, we will introduce several common and useful units of concentration.

Molarity (M) is defined as the number of moles of solute divided by the number of liters of solution:

which can be simplified as

As with any mathematical equation, if you know any two quantities, you can calculate the third, unknown, quantity.

For example, suppose you have 0.500 L of solution that has 0.24 mol of NaOH dissolved in it. The concentration of the solution can be calculated as follows:

The concentration of the solution is 0.48 M, which is spoken as “zero point forty-eight molarity” or “zero point forty-eight molar.” If the quantity of the solute is given in mass units, you must convert mass units to mole units before using the definition of molarity to calculate concentration. For example, what is the molar concentration of a solution of 22.4 g of HCl dissolved in 1.56 L? First, convert the mass of solute to moles using the molar mass of HCl (36.5 g/mol):

Now we can use the definition of molarity to determine a concentration:

Example 3 What is the molarity of a solution made when 32.7 g of NaOH are dissolved to make 445 mL of solution? Solution To use the definition of molarity, both quantities must be converted to the proper units. First, convert the volume units from milliliters to liters: Now we convert the amount of solute to moles, using the molar mass of NaOH, which is 40.0 g/mol: Now we can use the definition of molarity to determine the molar concentration: Test Yourself What is the molarity of a solution made when 66.2 g of C6H12O6 are dissolved to make 235 mL of solution? Answer 1.57 M

The definition of molarity can be used to determine the amount of solute or the volume of solution, if the other information is given. Example 4 illustrates this situation.

Example 4 How many moles of solute are present in 0.108 L of a 0.887 M NaCl solution? Solution We know the volume and the molarity; we can use the definition of molarity to mathematically solve for the amount in moles. Substituting the quantities into the definition of molarity: We multiply the 0.108 L over to the other side of the equation and multiply the units together; “molarity × liters” equals moles, according to the definition of molarity. So mol NaCl = (0.887 M)(0.108 L) = 0.0958 mol Test Yourself How many moles of solute are present in 225 mL of a 1.44 M CaCl2 solution? Answer 0.324 mol

If you need to determine volume, remember the rule that the unknown quantity must be by itself and in the numerator to determine the correct answer. Thus rearrangement of the definition of molarity is required.

Example 5 What volume of a 2.33 M NaNO3 solution is needed to obtain 0.222 mol of solute? Solution Using the definition of molarity, we have To solve for the number of liters, we bring the 2.33 M over to the right into the denominator, and the number of liters over to the left in the numerator. We now have Dividing, the volume is 0.0953 L = 95.3 mL. Test Yourself What volume of a 0.570 M K2SO4 solution is needed to obtain 0.872 mol of solute? Answer 1.53 L

A similar unit of concentration is molality (m), which is defined as the number of moles of solute per kilogram of solvent, not per liter of solution:

Mathematical manipulation of molality is the same as with molarity.

Another way to specify an amount is percentage composition by mass (or mass percentage, % m/m). It is defined as follows:

It is not uncommon to see this unit used on commercial products (Figure 11.1 “Concentration in Commercial Applications”).

Example 6 What is the mass percentage of Fe in a piece of metal with 87.9 g of Fe in a 113 g sample? Solution Using the definition of mass percentage, we have Test Yourself What is the mass percentage of H2O2 in a solution with 1.67 g of H2O2 in a 55.5 g sample? Answer 3.01%

Related concentration units are parts per thousand (ppth), parts per million (ppm), and parts per billion (ppb). Parts per thousand is defined as follows:

There are similar definitions for parts per million and parts per billion:

and

Each unit is used for progressively lower and lower concentrations. The two masses must be expressed in the same unit of mass, so conversions may be necessary.

Example 7 If there is 0.6 g of Pb present in 277 g of solution, what is the Pb concentration in parts per thousand? Solution Use the definition of parts per thousand to determine the concentration. Substituting Test Yourself If there is 0.551 mg of As in 348 g of solution, what is the As concentration in ppm? Answer 1.58 ppm

As with molarity and molality, algebraic rearrangements may be necessary to answer certain questions.

Example 8 The concentration of Cl– ion in a sample of H2O is 15.0 ppm. What mass of Cl– ion is present in 240.0 mL of H2O, which has a density of 1.00 g/mL? Solution First, use the density of H2O to determine the mass of the sample: Now we can use the definition of ppm: Rearranging to solve for the mass of solute, Test Yourself The concentration of Fe3+ ion in a sample of H2O is 335.0 ppm. What mass of Fe3+ ion is present in 3,450 mL of H2O, which has a density of 1.00 g/mL? Answer 1.16 g

For ionic solutions, we need to differentiate between the concentration of the salt versus the concentration of each individual ion. Because the ions in ionic compounds go their own way when a compound is dissolved in a solution, the resulting concentration of the ion may be different from the concentration of the complete salt. For example, if 1 M NaCl were prepared, the solution could also be described as a solution of 1 M Na+(aq) and 1 M Cl−(aq) because there is one Na+ ion and one Cl− ion per formula unit of the salt. However, if the solution were 1 M CaCl2, there are two Cl−(aq) ions for every formula unit dissolved, so the concentration of Cl−(aq) would be 2 M, not 1 M.

In addition, the total ion concentration is the sum of the individual ion concentrations. Thus for the 1 M NaCl, the total ion concentration is 2 M; for the 1 M CaCl2, the total ion concentration is 3 M.

Key Takeaways

Quantitative units of concentration include molarity, molality, mass percentage, parts per thousand, parts per million, and parts per billion.

Exercises

Differentiate between molarity and molality.

Differentiate between mass percentage and parts per thousand.

What is the molarity of a solution made by dissolving 13.4 g of NaNO3 in 345 mL of solution?

What is the molarity of a solution made by dissolving 332 g of C6H12O6 in 4.66 L of solution?

How many moles of MgCl2 are present in 0.0331 L of a 2.55 M solution?

How many moles of NH4Br are present in 88.9 mL of a 0.228 M solution?

What volume of 0.556 M NaCl is needed to obtain 0.882 mol of NaCl?

What volume of 3.99 M H2SO4 is needed to obtain 4.61 mol of H2SO4?

What volume of 0.333 M Al(NO3)3 is needed to obtain 26.7 g of Al(NO3)3?

What volume of 1.772 M BaCl2 is needed to obtain 123 g of BaCl2?

What are the individual ion concentrations and the total ion concentration in 0.66 M Mg(NO3)2?

What are the individual ion concentrations and the total ion concentration in 1.04 M Al2(SO4)3?

If the C2H3O2– ion concentration in a solution is 0.554 M, what is the concentration of Ca(C2H3O2)2?

If the Cl− ion concentration in a solution is 2.61 M, what is the concentration of FeCl3?

Answers

1.

Molarity is moles per liter, whereas molality is moles per kilogram of solvent.

3.

0.457 M

5.

0.0844 mol

9.

1.59 L

11.

0.376 L

13.

Mg2+ = 0.66 M; NO3− = 1.32 M; total: 1.98 M

15.

0.277 M

Chapter 84

12.3 Dilutions and Concentrations

Learning Objective

1. Learn how to dilute and concentrate solutions.

Often, a worker will need to change the concentration of a solution by changing the amount of solvent. Dilution is the addition of solvent, which decreases the concentration of the solute in the solution. Concentration is the removal of solvent, which increases the concentration of the solute in the solution. (Do not confuse the two uses of the word concentration here!)

In both dilution and concentration, the amount of solute stays the same. This gives us a way to calculate what the new solution volume must be for the desired concentration of solute. From the definition of molarity,

molarity = moles of solute / liters of solution

we can solve for the number of moles of solute:

moles of solute = (molarity)(liters of solution)

A simpler way of writing this is to use M to represent molarity and V to represent volume. So the equation becomes

moles of solute = MV

Because this quantity does not change before and after the change in concentration, the product MV must be the same before and after the concentration change. Using numbers to represent the initial and final conditions, we have

M1V1 = M2V2

as the dilution equation. The volumes must be expressed in the same units. Note that this equation gives only the initial and final conditions, not the amount of the change. The amount of change is determined by subtraction.

Example 9 If 25.0 mL of a 2.19 M solution are diluted to 72.8 mL, what is the final concentration? Solution It does not matter which set of conditions is labelled 1 or 2, as long as the conditions are paired together properly. Using the dilution equation, we have (2.19 M)(25.0 mL) = M2(72.8 mL) Solving for the second concentration (noting that the milliliter units cancel), M2 = 0.752 M The concentration of the solution has decreased. In going from 25.0 mL to 72.8 mL, 72.8 − 25.0 = 47.8 mL of solvent must be added. Test Yourself A 0.885 M solution of KBr whose initial volume is 76.5 mL has more water added until its concentration is 0.500 M. What is the new volume of the solution? Answer 135.4 mL

Concentrating solutions involves removing solvent. Usually this is done by evapourating or boiling, assuming that the heat of boiling does not affect the solute. The dilution equation is used in these circumstances as well.

Chemistry Is Everywhere: Preparing IV Solutions

In a hospital emergency room, a physician orders an intravenous (IV) delivery of 100 mL of 0.5% KCl for a patient suffering from hypokalemia (low potassium levels). Does an aide run to a supply cabinet and take out an IV bag containing this concentration of KCl?

Not likely. It is more probable that the aide must make the proper solution from an IV bag of sterile solution and a more concentrated, sterile solution, called a stock solution, of KCl. The aide is expected to use a syringe to draw up some stock solution and inject it into the waiting IV bag and dilute it to the proper concentration. Thus the aide must perform a dilution calculation.

If the stock solution is 10.0% KCl and the final volume and concentration need to be 100 mL and 0.50%, respectively, then it is an easy calculation to determine how much stock solution to use:

(10%)V1 = (0.50%)(100 mL)
V1 = 5 mL

Of course, the addition of the stock solution affects the total volume of the diluted solution, but the final concentration is likely close enough even for medical purposes.

Medical and pharmaceutical personnel are constantly dealing with dosages that require concentration measurements and dilutions. It is an important responsibility: calculating the wrong dose can be useless, harmful, or even fatal!

Key Takeaways

Calculate the new concentration or volume for a dilution or concentration of a solution.

Exercises

What is the difference between dilution and concentration?

What quantity remains constant when you dilute a solution?

A 1.88 M solution of NaCl has an initial volume of 34.5 mL. What is the final concentration of the solution if it is diluted to 134 mL?

A 0.664 M solution of NaCl has an initial volume of 2.55 L. What is the final concentration of the solution if it is diluted to 3.88 L?

If 1.00 mL of a 2.25 M H2SO4 solution needs to be diluted to 1.00 M, what will be its final volume?

If 12.00 L of a 6.00 M HNO3 solution needs to be diluted to 0.750 M, what will be its final volume?

If 665 mL of a 0.875 M KBr solution are boiled gently to concentrate the solute to 1.45 M, what will be its final volume?

If 1.00 L of an LiOH solution is boiled down to 164 mL and its initial concentration is 0.00555 M, what is its final concentration?

How much water must be added to 75.0 mL of 0.332 M FeCl3(aq) to reduce its concentration to 0.250 M?

How much water must be added to 1.55 L of 1.65 M Sc(NO3)3(aq) to reduce its concentration to 1.00 M?

Answers

1.

Dilution is a decrease in a solution’s concentration, whereas concentration is an increase in a solution’s concentration.

3.

0.484 M

5.

2.25 mL

7.

401 mL

9.

24.6 mL

Chapter 85

12.4 Concentrations as Conversion Factors

Learning Objectives

1. Apply concentration units as conversion factors.

Concentration can be a conversion factor between the amount of solute and the amount of solution or solvent (depending on the definition of the concentration unit). As such, concentrations can be useful in a variety of stoichiometry problems. In many cases, it is best to use the original definition of the concentration unit; it is that definition that provides the conversion factor.

A simple example of using a concentration unit as a conversion factor is one in which we use the definition of the concentration unit and rearrange; we can do the calculation again as a unit conversion, rather than as a definition. For example, suppose we ask how many moles of solute are present in 0.108 L of a 0.887 M NaCl solution. Because 0.887 M means 0.887 mol/L, we can use this second expression for the concentration as a conversion factor:

0.108 L NaCl × (0.887 mol NaCl /(1 L NaCl)) = 0.0958 mol NaCl

(There is an understood 1 in the denominator of the conversion factor.) If we used the definition approach, we get the same answer, but now we are using conversion factor skills. Like any other conversion factor that relates two different types of units, the reciprocal of the concentration can be also used as a conversion factor.

Example 10 Using concentration as a conversion factor, how many liters of 2.35 M CuSO4 are needed to obtain 4.88 mol of CuSO4? Solution This is a one-step conversion, but the concentration must be written as the reciprocal for the units to work out: 4.88 mol CuSO4×(1 L / 2.35 mol) = 2.08 L of solution Test Yourself Using concentration as a conversion factor, how many liters of 0.0444 M CH2O are needed to obtain 0.0773 mol of CH2O? Answer 1.74 L

Of course, once quantities in moles are available, another conversion can give the mass of the substance, using molar mass as a conversion factor.

Example 11 What mass of solute is present in 0.765 L of 1.93 M NaOH? Solution This is a two-step conversion, first using concentration as a conversion factor to determine the number of moles and then the molar mass of NaOH (40.0 g/mol) to convert to mass: 0.765 L × (1.93 mol NaOH / L solution) × (40.0 g NaOH / 1 mol NaOH) = 59.1 g NaOH Test Yourself What mass of solute is present in 1.08 L of 0.0578 M H2SO4? Answer 6.12 g

More complex stoichiometry problems using balanced chemical reactions can also use concentrations as conversion factors. For example, suppose the following equation represents a chemical reaction:

2 AgNO3(aq) + CaCl2(aq) → 2 AgCl(s) + Ca(NO3)2(aq)

If we wanted to know what volume of 0.555 M CaCl2 would react with 1.25 mol of AgNO3, we first use the balanced chemical equation to determine the number of moles of CaCl2 that would react and then use concentration to convert to liters of solution:

1.25 mol AgNO3 × (1 mol CaCl2 / 2 mol AgNO3) × (1 L solution / 0.555 mol CaCl2) =1.13 L CaCl2

This can be extended by starting with the mass of one reactant, instead of moles of a reactant.

Example 12 What volume of 0.0995 M Al(NO3)3 will react with 3.66 g of Ag according to the following chemical equation? 3 Ag(s) + Al(NO3)3(aq) → 3 AgNO3 + Al(s) Solution Here, we first must convert the mass of Ag to moles before using the balanced chemical equation and then the definition of molarity as a conversion factor: 3.66 g Ag × (1 mol Ag / 107.97 g Ag) × (1 mol Al(NO3)3 / 3 mol Ag) × (1 L solution / 0.0995 mol Al(NO3)3) = 0.114 L Test Yourself What volume of 0.512 M NaOH will react with 17.9 g of H2C2O4(s) according to the following chemical equation? H2C2O4(s) + 2 NaOH(aq) → Na2C2O4(aq) + 2 H2O(ℓ) Answer 0.777 L

We can extend our skills even further by recognizing that we can relate quantities of one solution to quantities of another solution. Knowing the volume and concentration of a solution containing one reactant, we can determine how much of another solution of another reactant will be needed using the balanced chemical equation.

Example 13 A student takes a precisely measured sample, called an aliquot, of 10.00 mL of a solution of FeCl3. The student carefully adds 0.1074 M Na2C2O4 until all the Fe3+(aq) has precipitated as Fe2(C2O4)3(s). Using a precisely measured tube called a burette, the student finds that 9.04 mL of the Na2C2O4 solution was added to completely precipitate the Fe3+(aq). What was the concentration of the FeCl3 in the original solution? (A precisely measured experiment like this, which is meant to determine the amount of a substance in a sample, is called a titration.) The balanced chemical equation is as follows: 2 FeCl3(aq) + 3 Na2C2O4(aq) → Fe2(C2O4)3(s) + 6 NaCl(aq) Solution First we need to determine the number of moles of Na2C2O4 that reacted. We will convert the volume to liters and then use the concentration of the solution as a conversion factor: 9.04 mL × (1 L / 1,000 mL) × (0.1074 mol Na2C2O4 / L) = 0.000971 mol Na2C2O4 Now we will use the balanced chemical equation to determine the number of moles of Fe3+(aq) that were present in the initial aliquot: 0.000971 mol Na2C2O4 × (2 mol FeCl3 / 3 mol Na2C2O4) = 0.000647 mol FeCl3 Then we determine the concentration of FeCl3 in the original solution. Converting 10.00 mL into liters (0.01000 L), we use the definition of molarity directly: M = mol / L = 0.000647 mol FeCl3 / 0.01000 L = 0.0647 M FeCl3 Test Yourself A student titrates 25.00 mL of H3PO4 with 0.0987 M KOH. She uses 54.06 mL to complete the chemical reaction. What is the concentration of H3PO4? H3PO4(aq) + 3 KOH(aq) → K3PO4(aq) + 3 H2O Answer 0.0711 M When a student performs a titration, a measured amount of one solution is added to another reactant. “Chemistry titration lab” by Kentucky Country Day is licensed under the Creative Commons Attribution-NonCommercial 2.0 Generic.

We have used molarity exclusively as the concentration of interest, but that will not always be the case. The next example shows a different concentration unit being used.

Example 14 H2O2 is used to determine the amount of Mn according to this balanced chemical equation: 2 MnO4−(aq) + 5 H2O2(aq) + 6H+(aq) → 2 Mn2+(aq) + 5 O2(g) + 8 H2O(ℓ) What mass of 3.00% m/m H2O2 solution is needed to react with 0.355 mol of MnO4−(aq)? Solution Because we are given an initial amount in moles, all we need to do is use the balanced chemical equation to determine the number of moles of H2O2 and then convert to find the mass of H2O2. Knowing that the H2O2 solution is 3.00% by mass, we can determine the mass of solution needed: 0.355 mol MnO4− × (5 mol H2O2 / 2 mol MnO4−) × (34.02 g H2O2 / mol H2O2) × (100 g solution / 3 g H2O2) = 1,006 g solution The first conversion factor comes from the balanced chemical equation, the second conversion factor is the molar mass of H2O2, and the third conversion factor comes from the definition of percentage concentration by mass. Test Yourself Use the balanced chemical reaction for MnO4− and H2O2 to determine what mass of O2 is produced if 258 g of 3.00% m/m H2O2 is reacted with MnO4−. Answer 7.28 g

Key Takeaways

Know how to apply concentration units as conversion factors.

Exercises

Using concentration as a conversion factor, how many moles of solute are in 3.44 L of 0.753 M CaCl2?

Using concentration as a conversion factor, how many moles of solute are in 844 mL of 2.09 M MgSO4?

Using concentration as a conversion factor, how many liters are needed to provide 0.822 mol of NaBr from a 0.665 M solution?

Using concentration as a conversion factor, how many liters are needed to provide 2.500 mol of (NH2)2CO from a 1.087 M solution?

What is the mass of solute in 24.5 mL of 0.755 M CoCl2?

What is the mass of solute in 3.81 L of 0.0232 M Zn(NO3)2?

What volume of solution is needed to provide 9.04 g of NiF2 from a 0.332 M solution?

What volume of solution is needed to provide 0.229 g of CH2O from a 0.00560 M solution?

What volume of 3.44 M HCl will react with 5.33 mol of CaCO3?

2 HCl + CaCO3 → CaCl2 + H2O + CO2

What volume of 0.779 M NaCl will react with 40.8 mol of Pb(NO3)2?

Pb(NO3)2 + 2 NaCl → PbCl2 + 2 NaNO3

What volume of 0.905 M H2SO4 will react with 26.7 mL of 0.554 M NaOH?

H2SO4 + 2 NaOH → Na2SO4 + 2 H2O

What volume of 1.000 M Na2CO3 will react with 342 mL of 0.733 M H3PO4?

3 Na2CO3 + 2 H3PO4 → 2Na3PO4 + 3 H2O + 3 CO2

It takes 23.77 mL of 0.1505 M HCl to titrate with 15.00 mL of Ca(OH)2. What is the concentration of Ca(OH)2? You will need to write the balanced chemical equation first.

It takes 97.62 mL of 0.0546 M NaOH to titrate a 25.00 mL sample of H2SO4. What is the concentration of H2SO4? You will need to write the balanced chemical equation first.

It takes 4.667 mL of 0.0997 M HNO3 to dissolve some solid Cu. What mass of Cu can be dissolved?

Cu + 4 HNO3(aq) → Cu(NO3)2(aq) + 2 NO2 + 2 H2O

It takes 49.08 mL of 0.877 M NH3 to dissolve some solid AgCl. What mass of AgCl can be dissolved?

AgCl(s) + 4 NH3(aq) → Ag(NH3)4Cl(aq)

What mass of 3.00% H2O2 is needed to produce 66.3 g of O2(g)?

2 H2O2(aq) → 2 H2O(ℓ) + O2(g)

A 0.75% solution of Na2CO3 is used to precipitate Ca2+ ions from solution. What mass of solution is needed to precipitate 40.7 L of solution with a concentration of 0.0225 M Ca2+(aq)?

Na2CO3(aq) + Ca2+(aq) → CaCO3(s) + 2 Na+(aq)

Answers

1.

2.59 mol

3.

1.24 L

5.

2.40 g

7.

0.282 L

9.

3.10 L

11.

8.17 mL

13.

0.1192 M

15.

7.39 mg

17.

4.70 kg

Chapter 86

12.5 Colligative Properties of Solutions

Learning Objectives

Name the four colligative properties.

Calculate changes in vapour pressure, melting point, and boiling point of solutions.

Calculate the osmotic pressure of solutions.

The properties of solutions are very similar to the properties of their respective pure solvents. This makes sense because the majority of the solution is the solvent. However, some of the properties of solutions differ from pure solvents in measurable and predictable ways. The differences are proportional to the fraction that the solute particles occupy in the solution. These properties are called colligative properties; the word colligative comes from the Greek word meaning “related to the number,” implying that these properties are related to the number of solute particles, not their identities.

Before we introduce the first colligative property, we need to introduce a new concentration unit. The mole fraction of the ith component in a solution, χi, is the number of moles of that component divided by the total number of moles in the sample: (χ is the lowercase Greek letter chi.) The mole fraction is always a number between 0 and 1 (inclusive) and has no units; it is just a number.

Example 15 A solution is made by mixing 12.0 g of C10H8 in 45.0 g of C6H6. What is the mole fraction of C10H8 in the solution? Solution We need to determine the number of moles of each substance, add them together to get the total number of moles, and then divide to determine the mole fraction of C10H8. The number of moles of C10H8 is as follows: The number of moles of C6H6 is as follows: The total number of moles is 0.0936 mol + 0.576 mol = 0.670 mol Now we can calculate the mole fraction of C10H8: The mole fraction is a number between 0 and 1 and is unitless. Test Yourself A solution is made by mixing 33.8 g of CH3OH in 50.0 g of H2O. What is the mole fraction of CH3OH in the solution? Answer 0.275

A useful thing to note is that the sum of the mole fractions of all substances in a mixture equals 1. Thus the mole fraction of C6H6 in Example 15 could be calculated by evaluating the definition of mole fraction a second time, or—because there are only two substances in this particular mixture—we can subtract the mole fraction of the C10H8 from 1 to get the mole fraction of C6H6.

Now that this new concentration unit has been introduced, the first colligative property can be considered. As was mentioned in Chapter 10 “Solids and Liquids”, all pure liquids have a characteristic vapour pressure in equilibrium with the liquid phase, the partial pressure of which is dependent on temperature. Solutions, however, have a lower vapour pressure than the pure solvent has, and the amount of lowering is dependent on the fraction of solute particles, as long as the solute itself does not have a significant vapour pressure (the term nonvolatile is used to describe such solutes). This colligative property is called vapour pressure depression (or lowering). The actual vapour pressure of the solution can be calculated as follows:

where Psoln is the vapour pressure of the solution, χsolv is the mole fraction of the solvent particles, and Psolv* is the vapour pressure of the pure solvent at that temperature (which is data that must be provided). This equation is known as Raoult’s law (the approximate pronunciation is rah-OOLT). Vapor pressure depression is rationalized by presuming that solute particles take positions at the surface in place of solvent particles, so not as many solvent particles can evapourate.

Example 16 A solution is made by mixing 12.0 g of C10H8 in 45.0 g of C6H6. If the vapour pressure of pure C6H6 is 95.3 torr, what is the vapour pressure of the solution? Solution This is the same solution that was in Example 15, but here we need the mole fraction of C6H6. The number of moles of C10H8 is as follows: The number of moles of C6H6 is as follows: So the total number of moles is 0.0936 mol + 0.576 mol = 0.670 mol Now we can calculate the mole fraction of C6H6: (The mole fraction of C10H8 calculated in Example 15 plus the mole fraction of C6H6 equals 1, which is mathematically required by the definition of mole fraction.) Now we can use Raoult’s law to determine the vapour pressure in equilibrium with the solution: Psoln = (0.860)(95.3 torr) = 82.0 torr The solution has a lower vapour pressure than the pure solvent. Test Yourself A solution is made by mixing 33.8 g of C6H12O6 in 50.0 g of H2O. If the vapour pressure of pure water is 25.7 torr, what is the vapour pressure of the solution? Answer 24.1 torr

Two colligative properties are related to solution concentration as expressed in molality. As a review, recall the definition of molality:

Because the vapour pressure of a solution with a nonvolatile solute is depressed compared to that of the pure solvent, it requires a higher temperature for the solution’s vapour pressure to reach 1.00 atm (760 torr). Recall that this is the definition of the normal boiling point: the temperature at which the vapour pressure of the liquid equals 1.00 atm. As such, the normal boiling point of the solution is higher than that of the pure solvent. This property is called boiling point elevation.

The change in boiling point (ΔTb) is easily calculated:

ΔTb = mKb

where m is the molality of the solution and Kb is called the boiling point elevation constant, which is a characteristic of the solvent. Several boiling point elevation constants (as well as boiling point temperatures) are listed in Table 11.3 “Boiling Point Data for Various Liquids”.

Table 12.3 Boiling Point Data for Various Liquids

Liquid	Boiling Point (°C)	Kb (°C/ m )
HC 2 H 3 O 2	117.90	3.07
C 6 H 6	80.10	2.53
CCl 4	76.8	4.95
H 2 O	100.00	0.512

Remember that what is initially calculated is the change in boiling point temperature, not the new boiling point temperature. Once the change in boiling point temperature is calculated, it must be added to the boiling point of the pure solvent—because boiling points are always elevated—to get the boiling point of the solution.

Example 17 What is the boiling point of a 2.50 m solution of C6H4Cl2 in CCl4? Assume that C6H4Cl2 is not volatile. Solution Using the equation for the boiling point elevation, ΔTb = (2.50 m)(4.95°C/m) = 12.4°C Note how the molality units have canceled. However, we are not finished. We have calculated the change in the boiling point temperature, not the final boiling point temperature. If the boiling point goes up by 12.4°C, we need to add this to the normal boiling point of CCl4 to get the new boiling point of the solution: TBP = 76.8°C + 12.4°C = 89.2°C The boiling point of the solution is predicted to be 89.2°C. Test Yourself What is the boiling point of a 6.95 m solution of C12H22O11 in H2O? Answer 103.6°C

The boiling point of a solution is higher than the boiling point of the pure solvent, but the opposite occurs with the freezing point. The freezing point of a solution is lower than the freezing point of the pure solvent. Think of this by assuming that solute particles interfere with solvent particles coming together to make a solid, so it takes a lower temperature to get the solvent particles to solidify. This is called freezing point depression.

The equation to calculate the change in the freezing point for a solution is similar to the equation for the boiling point elevation:

ΔTf = mKf

where m is the molality of the solution and Kf is called the freezing point depression constant, which is also a characteristic of the solvent. Several freezing point depression constants (as well as freezing point temperatures) are listed in Table 11.4 “Freezing Point Data for Various Liquids”.

Table 12.4 Freezing Point Data for Various Liquids

Liquid	Freezing Point (°C)	Kf (°C/ m )
HC 2 H 3 O 2	16.60	3.90
C 6 H 6	5.51	4.90
C 6 H 12	6.4	20.2
C 10 H 8	80.2	6.8
H 2 O	0.00	1.86

Remember that this equation calculates the change in the freezing point, not the new freezing point. What is calculated needs to be subtracted from the normal freezing point of the solvent because freezing points always go down.

Example 18 What is the freezing point of a 1.77 m solution of CBr4 in C6H6? Solution We use the equation to calculate the change in the freezing point and then subtract this number from the normal freezing point of C6H6 to get the freezing point of the solution: ΔTf = (1.77 m)(4.90°C/m) = 8.67°C Now we subtract this number from the normal freezing point of C6H6, which is 5.51°C: 5.51 − 8.67 = −3.16°C The freezing point of the solution is −3.16°C. Test Yourself What is the freezing point of a 3.05 m solution of CBr4 in C10H8? Answer 59.5°C

Freezing point depression is one colligative property we use in everyday life. Many antifreezes used in automobile radiators use solutions that have a lower freezing point than normal so that automobile engines can operate at subfreezing temperatures. We also take advantage of freezing point depression when we sprinkle various compounds on ice to thaw it in the winter for safety (Figure 12.2 “Salt and Safety”). The compounds make solutions that have a lower freezing point, so rather than forming slippery ice, any ice is liquefied and runs off, leaving a safer pavement behind.

Figure 12.2 Salt and Safety. Salt or other compounds take advantage of the freezing point depression to minimize the formation of ice on sidewalks and roads, thus increasing safety.

Source: “Salt, road, and cover” by Phil Romans is licensed under the Creative Commons Attribution-NonCommercial-NoDerivs 2.0 Generic.

Before we introduce the final colligative property, we need to present a new concept. A semipermeable membrane is a thin membrane that will pass certain small molecules but not others. A thin sheet of cellophane, for example, acts as a semipermeable membrane.

Consider the system in Figure 12.3 “Osmosis”a. A semipermeable membrane separates two solutions having the different concentrations marked. Curiously, this situation is not stable; there is a tendency for water molecules to move from the dilute side (on the left) to the concentrated side (on the right) until the concentrations are equalized, as in Figure 11.3 “Osmosis”b. This tendency is called osmosis. In osmosis, the solute remains in its original side of the system; only solvent molecules move through the semipermeable membrane. In the end, the two sides of the system will have different volumes. Because a column of liquid exerts a pressure, there is a pressure difference Π on the two sides of the system that is proportional to the height of the taller column. This pressure difference is called the osmotic pressure, which is a colligative property.

The osmotic pressure of a solution is easy to calculate:

Π = MRT

where Π is the osmotic pressure of a solution, M is the molarity of the solution, R is the ideal gas law constant, and T is the absolute temperature. This equation is reminiscent of the ideal gas law we considered in Chapter 6 “Gases”.

Example 19 What is the osmotic pressure of a 0.333 M solution of C6H12O6 at 25°C? Solution First we need to convert our temperature to kelvins: T = 25 + 273 = 298 K Now we can substitute into the equation for osmotic pressure, recalling the value for R: The units may not make sense until we realize that molarity is defined as moles per liter: Now we see that the moles, liters, and kelvins cancel, leaving atmospheres, which is a unit of pressure. Solving, Π = 8.14 atm This is a substantial pressure! It is the equivalent of a column of water 84 m tall. Test Yourself What is the osmotic pressure of a 0.0522 M solution of C12H22O11 at 55°C? Answer 1.40 atm

Osmotic pressure is important in biological systems because cell walls are semipermeable membranes. In particular, when a person is receiving intravenous (IV) fluids, the osmotic pressure of the fluid needs to be approximately the same as blood serum; otherwise bad things can happen. Figure 12.4 “Osmotic Pressure and Red Blood Cells” shows three red blood cells: Figure 12.4 “Osmotic Pressure and Red Blood Cells”a shows a healthy red blood cell. Figure 12.4 “Osmotic Pressure and Red Blood Cells”b shows a red blood cell that has been exposed to a lower concentration than normal blood serum (a so-called hypotonic solution); the cell has plumped up as solvent moves into the cell to dilute the solutes inside. Figure 12.4 “Osmotic Pressure and Red Blood Cells”c shows a red blood cell exposed to a higher concentration than normal blood serum (hypertonic); water leaves the red blood cell, so it collapses onto itself. Only when the solutions inside and outside the cell are the same (isotonic) will the red blood cell be able to do its job.

Osmotic pressure is also the reason you should not drink seawater if you’re stranded in a lifeboat on an ocean; seawater has a higher osmotic pressure than most of the fluids in your body. You can drink the water, but ingesting it will pull water out of your cells as osmosis works to dilute the seawater. Ironically, your cells will die of thirst, and you will also die. (It is OK to drink the water if you are stranded on a body of freshwater, at least from an osmotic pressure perspective.) Osmotic pressure is also thought to be important—in addition to capillary action—in getting water to the tops of tall trees.

Key Takeaways

Colligative properties depend only on the number of dissolved particles (that is, the concentration), not their identity.

Raoult’s law is concerned with the vapour pressure depression of solutions.

The boiling points of solutions are always higher, and the freezing points of solutions are always lower, than those of the pure solvent.

Osmotic pressure is caused by concentration differences between solutions separated by a semipermeable membrane and is an important biological issue.

Exercises

What are the three colligative properties that involve phase changes?

Which colligative property does not involve a phase change? Give an example of its importance.

If 45.0 g of C6H6 and 60.0 g of C6H5CH3 are mixed together, what is the mole fraction of each component?

If 125 g of N2 are mixed with 175 g of O2, what is the mole fraction of each component?

If 36.5 g of NaCl are mixed with 63.5 g of H2O, what is the mole fraction of each component?

An alloy of stainless steel is prepared from 75.4 g of Fe, 12.6 g of Cr, and 10.8 g of C. What is the mole fraction of each component?

A solution is made by mixing 12.0 g of C10H8 in 45.0 g of C6H6. If the vapour pressure of pure C6H6 is 76.5 torr at a particular temperature, what is the vapour pressure of the solution at the same temperature?

A solution is made by mixing 43.9 g of C6H12C6 in 100.0 g of H2O. If the vapour pressure of pure water is 26.5 torr at a particular temperature, what is the vapour pressure of the solution at the same temperature?

At 300°C, the vapour pressure of Hg is 32.97 torr. If 0.775 g of Au were dissolved into 3.77 g of Hg, what would be the vapour pressure of the solution?

At 300°C, the vapour pressure of Hg is 32.97 torr. What mass of Au would have to be dissolved in 5.00 g of Hg to lower its vapour pressure to 25.00 torr?

If 25.0 g of C6H12O6 are dissolved in 100.0 g of H2O, what is the boiling point of this solution?

If 123 g of C10H16O are dissolved in 355 g of C6H6, what is the boiling point of this solution?

If 1 mol of solid CBr4 is mixed with 2 mol of CCl4, what is the boiling point of this solution?

A solution of C2H2O4 in CH3COOH has a boiling point of 123.40°C. What is the molality of the solution?

If 123 g of C10H16O are dissolved in 355 g of C6H6, what is the freezing point of this solution?

If 25.0 g of C6H12O6 are dissolved in 100.0 g of H2O, what is the freezing point of this solution?

C8H17OH is a nonvolatile solid that dissolves in C6H12. If 7.22 g of C8H17OH is dissolved in 45.3 g of C6H12, what is the freezing point of this solution?

A solution of C2H2O4 in CH3COOH has a freezing point of 10.00°C. What is the molality of the solution?

If 25.0 g of C6H12O6 are dissolved in H2O to make 0.100 L of solution, what is the osmotic pressure of this solution at 25°C?

If 2.33 g of C27H46O are dissolved in liquid CS2 to make 50.00 mL of solution, what is the osmotic pressure of this solution at 298 K?

At 298 K, what concentration of solution is needed to have an osmotic pressure of 1.00 atm?

The osmotic pressure of blood is about 7.65 atm at 37°C. What is the approximate concentration of dissolved solutes in blood? (There are many different solutes in blood, so the answer is indeed an approximation.)

Answers

1.

boiling point elevation, freezing point depression, vapour pressure depression

3.

mole fraction C6H6: 0.469; mole fraction C6H5CH3: 0.531

5.

mole fraction NaCl: 0.157; mole fraction H2O: 0.843

7.

65.8 torr

9.

27.26 torr

11.

100.71°C

13.

92.9°C

15.

−5.65°C

17.

−18.3°C

19.

33.9 atm

21.

0.0409 M

Chapter 87

12.6 Colligative Properties of Ionic Solutes

Learning Objectives

1. Determine the colligative properties of solutions of ionic solutes.

In Section 12.5 “Colligative Properties of Solutions”, we considered the colligative properties of solutions with molecular solutes. What about solutions with ionic solutes? Do they exhibit colligative properties?

There is a complicating factor: ionic solutes separate into ions when they dissolve. This increases the total number of particles dissolved in solution and increases the impact on the resulting colligative property. Historically, this greater-than-expected impact on colligative properties was one main piece of evidence for ionic compounds separating into ions (increased electrical conductivity was another piece of evidence).

For example, when NaCl dissolves, it separates into two ions:

NaCl(s) → Na+(aq) + Cl−(aq)

This means that a 1 M solution of NaCl actually has a net particle concentration of 2 M. The observed colligative property will then be twice as large as expected for a 1 M solution.

It is easy to incorporate this concept into our equations to calculate the respective colligative property. We define the van’t Hoff factor (i) as the number of particles each solute formula unit breaks apart into when it dissolves. Previously, we have always tacitly assumed that the van’t Hoff factor is simply 1. But for some ionic compounds, i is not 1, as shown in Table 12.5 “Ideal van’t Hoff Factors for Ionic Compounds”.

Table 12.5 Ideal van’t Hoff Factors for Ionic Compounds

Compound	i
NaCl	2
KBr	2
LiNO 3	2
CaCl 2	3
Mg(C 2 H 3 O 2 ) 2	3
FeCl 3	4
Al 2 (SO 4 ) 3	5

The ideal van’t Hoff factor is equal to the number of ions that form when an ionic compound dissolves.

Example 20 Predict the van’t Hoff factor for Sr(OH)2. Solution When Sr(OH)2 dissolves, it separates into one Sr2+ ion and two OH− ions: Sr(OH)2 → Sr2+(aq) + 2 OH−(aq) Because it breaks up into three ions, its van’t Hoff factor is 3. Test Yourself What is the van’t Hoff factor for Fe(NO3)3? Answer 4

It is the “ideal” van’t Hoff factor because this is what we expect from the ionic formula. However, this factor is usually correct only for dilute solutions (solutions less than 0.001 M). At concentrations greater than 0.001 M, there are enough interactions between ions of opposite charge that the net concentration of the ions is less than expected—sometimes significantly. The actual van’t Hoff factor is thus less than the ideal one. Here, we will use ideal van’t Hoff factors.

Revised equations to calculate the effect of ionization are then easily produced:

ΔTb = imKb
ΔTf = imKg
Π = iMRT

where all variables have been previously defined. To calculate vapour pressure depression according to Raoult’s law, the mole fraction of solvent particles must be recalculated to take into account the increased number of particles formed on ionization.

Example 21 Determine the freezing point of a 1.77 m solution of NaCl in H2O. Solution For NaCl, we need to remember to include the van’t Hoff factor, which is 2. Otherwise, the calculation of the freezing point is straightforward: ΔTf = (2)(1.77 m)(1.86°C/m) = 6.58°C This represents the change in the freezing point, which is decreasing. So we have to subtract this change from the normal freezing point of water, 0.00°C: 0.00 − 6.58 = −6.58°C Test Yourself Determine the boiling point of a 0.887 m solution of CaCl2 in H2O. Answer 101.36°C

Food and Drink App: Salting Pasta Cooking Water

When cooking dried pasta, many recipes call for salting the water before cooking the pasta. Some argue—with colligative properties on their side—that adding salt to the water raises the boiling point, thus cooking the pasta faster. Is there any truth to this?

To judge the veracity of this claim, we can calculate how much salt should be added to the water to raise the boiling temperature by 1.0°C, with the presumption that dried pasta cooks noticeably faster at 101°C than at 100°C (although a 1° difference may make only a negligible change in cooking times). We can calculate the molality that the water should have:

1.0°C = m(0.512°C/m)
m = 1.95

We have ignored the van’t Hoff factor in our estimation because this obviously is not a dilute solution. Let us further assume that we are using 4 L of water (which is very close to 4 qt, which in turn equals 1 gal). Because 4 L of water is about 4 kg (it is actually slightly less at 100°C), we can determine how much salt (NaCl) to add:

4 kg H2O × (1.95 mol NaCl / kg H2O) × (58.5 g NaCl / 1 mol NaCl) = 456.3 g NaCl

This is just over 1 lb of salt and is equivalent to nearly 1 cup in the kitchen. In your experience, do you add almost a cup of salt to a pot of water to make pasta? Certainly not! A few pinches, perhaps one-fourth of a teaspoon, but not almost a cup! It is obvious that the little amount of salt that most people add to their pasta water is not going to significantly raise the boiling point of the water.

So why do people add some salt to boiling water? There are several possible reasons, the most obvious of which is taste: adding salt adds a little bit of salt flavour to the pasta. It cannot be much because most of the salt remains in the water, not in the cooked pasta. However, it may be enough to detect with our taste buds. The other obvious reason is habit; recipes tell us to add salt, so we do, even if there is little scientific or culinary reason to do so.

Key Takeaways

For ionic solutes, the calculation of colligative properties must include the fact that the solutes separate into multiple particles when they dissolve.

The equations for calculating colligative properties of solutions of ionic solvents include the van’t Hoff factor, i.

Exercises

Explain why we need to consider a van’t Hoff factor for ionic solutes but not for molecular solutes.

NaCl is often used in winter to melt ice on roads and sidewalks, but calcium chloride (CaCl2) is also used. Which would be better (on a mole-by-mole basis), and why?

Calculate the boiling point of an aqueous solution of NaNO3 made by mixing 15.6 g of NaNO3 with 100.0 g of H2O. Assume an ideal van’t Hoff factor.

Many labs use a cleaning solution of KOH dissolved in C2H5OH. If 34.7 g of KOH were dissolved in 88.0 g of C2H5OH, what is the boiling point of this solution? The normal boiling point of C2H5OH is 78.4°C and its Kb = 1.19°C/m. Assume an ideal van’t Hoff factor.

What is the freezing point of a solution made by dissolving 345 g of CaCl2 in 1,550 g of H2O? Assume an ideal van’t Hoff factor.

A classic homemade ice cream can be made by freezing the ice cream mixture using a solution of 250 g of NaCl dissolved in 1.25 kg of ice water. What is the temperature of this ice water? Assume an ideal van’t Hoff factor.

Seawater can be approximated as a 3.5% NaCl solution by mass; that is, 3.5 g of NaCl are combined with 96.5 g H2O. What is the osmotic pressure of seawater? Assume an ideal van’t Hoff factor.

The osmotic pressure of blood is 7.65 atm at 37°C. If blood were considered a solution of NaCl, what is the molar concentration of NaCl in blood? Assume an ideal van’t Hoff factor.

What is the vapour pressure of an aqueous solution of 36.4 g of KBr in 199.5 g of H2O if the vapour pressure of H2O at the same temperature is 32.55 torr? What other solute(s) would give a solution with the same vapour pressure? Assume an ideal van’t Hoff factor.

Assuming an ideal van’t Hoff factor, what mole fraction is required for a solution of Mg(NO3)2 to have a vapour pressure of 20.00 torr at 25.0°C? The vapour pressure of the solvent is 23.61 torr at this temperature.

Answers

1.

Ionic solutes separate into more than one particle when they dissolve, whereas molecular solutes do not.

3.

101.9°C

5.

−7.5°C

7.

30.3 atm

9.

30.86 torr; any two-ion salt should have the same effect.

Chapter 88

12.7 End-of-Chapter Material

Additional Exercises

One brand of ethyl alcohol (Everclear) is 95% ethyl alcohol, with the remaining 5% being water. What is the solvent and what is the solute of this solution?

Give an example of each type of solution from your own experience.

a) A solution composed of a gas solute in a liquid solvent.

b) A solution composed of a solid solute in a liquid solvent.

c) A solution composed of a liquid solute in a liquid solvent.

d) A solution composed of a solid solute in a solid solvent. (Hint: usually such solutions are made as liquids and then solidified.)

3. Differentiate between the terms saturated and concentrated.

4. Differentiate between the terms unsaturated and dilute.

5. What mass of FeCl2 is present in 445 mL of 0.0812 M FeCl2 solution?

6. What mass of SO2 is present in 26.8 L of 1.22 M SO2 solution?

7. What volume of 0.225 M Ca(OH)2 solution is needed to deliver 100.0 g of Ca(OH)2?

8. What volume of 12.0 M HCl solution is needed to obtain exactly 1.000 kg of HCl?

9. The World Health Organization recommends that the maximum fluoride ion concentration in drinking water is 1.0 ppm. Assuming water has the maximum concentration, if an average person drinks 1,920 mL of water per day, how many milligrams of fluoride ion are being ingested?

10. For sanitary reasons, water in pools should be chlorinated to a maximum level of 3.0 ppm. In a typical 5,000 gal pool that contains 21,200 kg of water, what mass of chlorine must be added to obtain this concentration?

11. Given its notoriety, you might think that uranium is very rare, but it is present at about 2–4 ppm of the earth’s crust, which is more abundant than silver or mercury. If the earth’s crust is estimated to have a mass of 8.50 × 1020 kg, what range of mass is thought to be uranium in the crust?

12. Chromium is thought to be an ultratrace element, with about 8.9 ng present in a human body. If the average body mass is 75.0 kg, what is the concentration of chromium in the body in pptr?

13. What mass of 3.00% H2O2 solution is needed to produce 35.7 g of O2(g) at 295 K at 1.05 atm pressure?

2 H2O2(aq) → 2 H2O(ℓ) + O2(g)

14. What volume of pool water is needed to generate 1.000 L of Cl2(g) at standard temperature and pressure if the pool contains 4.0 ppm HOCl and the water is slightly acidic? The chemical reaction is as follows:

HOCl(aq) + HCl(aq) → H2O(ℓ) + Cl2(g)

Assume the pool water has a density of 1.00 g/mL.

15. A 0.500 m solution of MgCl2 has a freezing point of −2.60°C. What is the true van’t Hoff factor of this ionic compound? Why is it less than the ideal value?

16. The osmotic pressure of a 0.050 M LiCl solution at 25.0°C is 2.26 atm. What is the true van’t Hoff factor of this ionic compound? Why is it less than the ideal value?

17. Order these solutions in order of increasing boiling point, assuming an ideal van’t Hoff factor for each: 0.10 m C6H12O6, 0.06 m NaCl, 0.4 m Au(NO3)3, and 0.4 m Al2(SO4)3.

18. Order these solutions in order of decreasing osmotic pressure, assuming an ideal van’t Hoff factor: 0.1 M HCl, 0.1 M CaCl2, 0.05 M MgBr2, and 0.07 M Ga(C2H3O2)3

Answers

1.

solvent: ethyl alcohol; solute: water

3.

Saturated means all the possible solute that can dissolve is dissolved, whereas concentrated implies that a lot of solute is dissolved.

5.

4.58 g

7.

6.00 L

9.

1.92 mg

11.

1.7 × 1015 to 3.4 × 1015 kg

13.

2,530 g

15.

2.80; it is less than 3 because not all ions behave as independent particles.

17.

0.10 m C6H12O6 < 0.06 m NaCl < 0.4 m Au(NO3)3 < 0.4 m Al2(SO4)3

PART IX

Unit 9 Acids and Bases

Chapter 89

Chapter 13. Acids and Bases

Introduction to Acids and Bases

Formerly there were rather campy science-fiction television shows in which the hero was always being threatened with death by being plunged into a vat of boiling acid: “Mwa ha ha, Buck Rogers [or whatever the hero’s name was], prepare to meet your doom by being dropped into a vat of boiling acid!” (The hero always escapes, of course.) This may have been interesting drama but not very good chemistry. If the villain knew his/her/its science, the hero would have been dropped into a vat of boiling base.

Recall that the active component of a classic acid is the H+ ion, while the active part of a classic base is the OH− ion. Both ions are related to water in that all H+ ion needs to become a water molecule is an OH− ion, while all an OH− ion needs to become water is an H+ ion. Consider the relative masses involved: an ion of mass 1 needs an ion of mass 17 to make water, while an ion of mass 17 needs an ion of mass 1 to make water. Which process do you think will be easier?

In fact, bases are more potentially dangerous than acids because it is much easier for an OH− ion to rip off an H+ ion from surrounding matter than it is for an H+ ion to rip off an OH− ion. Certain household chemicals, such as some brands of cleanser, can be very concentrated bases, which makes them among the most potentially hazardous substances found around the home; if spilled on the skin, the strong caustic compound can immediately remove H+ ions from the flesh, resulting in chemical burns. Compare that to the fact that we occasionally purposefully ingest substances such as citrus fruits, vinegar, and wine—all of which contain acids. (Of course, some parts of the body, such as the eyes, are extremely sensitive to acids as well as bases.) It seems that our bodies are more capable of dealing with acids than with bases.

On the left is a common acid, and on the right is a common base. Which one is more potentially hazardous?

Source: “Wine” by Priscila Darre is licensed under the Creative Commons Attribution-ShareAlike 2.0 Generic; “Spray” by robives is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 2.0 Generic.

So a note to all the villains out there: get your chemistry right if you want to be successful!

Acids and bases are important classes of chemical compounds. They are part of the foods and beverages we ingest, they are present in medicines and other consumer products, and they are prevalent in the world around us. In this chapter, we will focus on acids and bases and their chemistry.

Chapter 90

13.1 Arrhenius Acids and Bases

Learning Objectives

Identify an Arrhenius acid and an Arrhenius base.

Write the chemical reaction between an Arrhenius acid and an Arrhenius base.

Historically, the first chemical definition of an acid and a base was put forward by Svante Arrhenius, a Swedish chemist, in 1884. An Arrhenius acid is a compound that increases the H+ ion concentration in aqueous solution. The H+ ion is just a bare proton, and it is rather clear that bare protons are not floating around in an aqueous solution. Instead, chemistry has defined the hydronium ion (H3O+) as the actual chemical species that represents an H+ ion. H+ ions and H3O+ ions are often considered interchangeable when writing chemical equations (although a properly balanced chemical equation should also include the additional H2O). Classic Arrhenius acids can be considered ionic compounds in which H+ is the cation. Table 13.1 “Some Arrhenius Acids” lists some Arrhenius acids and their names.

Table 13.1 Some Arrhenius Acids

Formula	Name
HC 2 H 3 O 2 (also written CH 3 COOH)	acetic acid
HClO 3	chloric acid
HCl	hydrochloric acid
HBr	hydrobromic acid
HI	hydriodic acid
HF	hydrofluoric acid
HNO 3	nitric acid
H 2 C 2 O 4	oxalic acid
HClO 4	perchloric acid
H 3 PO 4	phosphoric acid
H 2 SO 4	sulfuric acid
H 2 SO 3	sulfurous acid

An Arrhenius base is a compound that increases the OH− ion concentration in aqueous solution. Ionic compounds of the OH− ion are classic Arrhenius bases.

Example 1 Identify each compound as an Arrhenius acid, an Arrhenius base, or neither. HNO3 CH3OH Mg(OH)2 Solution This compound is an ionic compound between H+ ions and NO3− ions, so it is an Arrhenius acid. Although this formula has an OH in it, we do not recognize the remaining part of the molecule as a cation. It is neither an acid nor a base. (In fact, it is the formula for methanol, an organic compound.) This formula also has an OH in it, but this time we recognize that the magnesium is present as Mg2+ cations. As such, this is an ionic compound of the OH− ion and is an Arrhenius base. Test Yourself Identify each compound as an Arrhenius acid, an Arrhenius base, or neither. KOH H2SO4 C2H6 Answer Arrhenius base Arrhenius acid neither

Acids have some properties in common. They turn litmus, a plant extract, red. They react with some metals to give off H2 gas. They react with carbonate and hydrogen carbonate salts to give off CO2 gas. Acids that are ingested typically have a sour, sharp taste. (The name acid comes from the Latin word acidus, meaning “sour.”) Bases also have some properties in common. They are slippery to the touch, turn litmus blue, and have a bitter flavour if ingested.

Acids and bases have another property: they react with each other to make water and an ionic compound called a salt. A salt, in chemistry, is any ionic compound made by combining an acid with a base. A reaction between an acid and a base is called a neutralization reaction and can be represented as follows:

acid + base → H2O + salt

The stoichiometry of the balanced chemical equation depends on the number of H+ ions in the acid and the number of OH− ions in the base.

Example 2 Write the balanced chemical equation for the neutralization reaction between H2SO4 and KOH. What is the name of the salt that is formed? Solution The general reaction is as follows: H2SO4 + KOH → H2O + salt Because the acid has two H+ ions in its formula, we need two OH− ions to react with it, making two H2O molecules as product. The remaining ions, K+ and SO42−, make the salt potassium sulfate (K2SO4). The balanced chemical reaction is as follows: H2SO4 + 2 KOH → 2 H2O + K2SO4 Test Yourself Write the balanced chemical equation for the neutralization reaction between HCl and Mg(OH)2. What is the name of the salt that is formed? Answer 2 HCl + Mg(OH)2 → 2 H2O + MgCl2; magnesium chloride

Key Takeaways

An Arrhenius acid is a compound that increases the H+ ion concentration in aqueous solution.

An Arrhenius base is a compound that increases the OH− ion concentration in aqueous solution.

The reaction between an Arrhenius acid and an Arrhenius base is called neutralization and results in the formation of water and a salt.

Exercises

Define Arrhenius acid.

Define Arrhenius base.

What are some general properties of Arrhenius acids?

What are some general properties of Arrhenius bases?

Identify each substance as an Arrhenius acid, an Arrhenius base, or neither.

a) NaOH

b) C2H5OH

c) H3PO4

6. Identify each substance as an Arrhenius acid, an Arrhenius base, or neither.

a) C6H12O6

b) HNO2

c) Ba(OH)2

7. Write the balanced chemical equation for the neutralization reaction between KOH and H2C2O4. What is the salt?

8. Write the balanced chemical equation for the neutralization reaction between Sr(OH)2 and H3PO4. What is the salt?

9. Write the balanced chemical equation for the neutralization reaction between HCl and Fe(OH)3. What is the salt?

10. Write the balanced chemical equation for the neutralization reaction between H2SO4 and Cr(OH)3. What is the salt?

11. CaCl2 would be the product of the reaction of what acid and what base?

12. Zn(NO3)2 would be product of the reaction of what acid and what base?

13. BaSO4 would be product of the reaction of what acid and what base?

14. Na3PO4 would be product of the reaction of what acid and what base?

Answers

1. a compound that increases the H+ concentration in water

3. sour taste, react with metals, and turn litmus red

5. a) Arrhenius base

b) neither

c) Arrhenius acid

7. 2 KOH + H2C2O4 → 2 H2O + K2C2O4; K2C2O4

9. 3 HCl + Fe(OH)3 → 3 H2O + FeCl3; FeCl3

11. HCl and Ca(OH)2

13. H2SO4 and Ba(OH)2

Chapter 91

13.2 Brønsted-Lowry Acids and Bases

Learning Objectives

Identify a Brønsted-Lowry acid and a Brønsted-Lowry base.

Identify conjugate acid-base pairs in an acid-base reaction.

The Arrhenius definition of acid and base is limited to aqueous (that is, water) solutions. Although this is useful because water is a common solvent, it is limited to the relationship between the H+ ion and the OH− ion. What would be useful is a more general definition that would be more applicable to other chemical reactions and, importantly, independent of H2O.

In 1923, Danish chemist Johannes Brønsted and English chemist Thomas Lowry independently proposed new definitions for acids and bases, ones that focus on proton transfer. A Brønsted-Lowry acid is any species that can donate a proton (H+) to another molecule. A Brønsted-Lowry base is any species that can accept a proton from another molecule. In short, a Brønsted-Lowry acid is a proton donor (PD), while a Brønsted-Lowry base is a proton acceptor (PA).

It is easy to see that the Brønsted-Lowry definition covers the Arrhenius definition of acids and bases. Consider the prototypical Arrhenius acid-base reaction:

H+(aq) + OH−(aq) → H2O(ℓ)

(acid) (base)

The acid species and base species are marked. The proton, however, is (by definition) a proton donor (labelled PD), while the OH− ion is acting as the proton acceptor (labelled PA):

H+(aq) + OH−(aq)→ H2O(ℓ)

(PD) (PA)

The proton donor is a Brønsted-Lowry acid, and the proton acceptor is the Brønsted-Lowry base:

H+(aq) + OH−(aq) → H2O(ℓ)

(BL acid) (BL base)

Thus H+ is an acid by both definitions, and OH− is a base by both definitions.

Ammonia (NH3) is a base even though it does not contain OH− ions in its formula. Instead, it generates OH− ions as the product of a proton-transfer reaction with H2O molecules; NH3 acts like a Brønsted-Lowry base, and H2O acts like a Brønsted-Lowry acid:

A reaction with water is called hydrolysis; we say that NH3 hydrolyzes to make NH4+ ions and OH− ions.

Even the dissolving of an Arrhenius acid in water can be considered a Brønsted-Lowry acid-base reaction. Consider the process of dissolving HCl(g) in water to make an aqueous solution of hydrochloric acid. The process can be written as follows:

HCl(g) + H2O(ℓ) → H3O+(aq) + Cl−(aq)

HCl(g) is the proton donor and therefore a Brønsted-Lowry acid, while H2O is the proton acceptor and a Brønsted-Lowry base. These two examples show that H2O can act as both a proton donor and a proton acceptor, depending on what other substance is in the chemical reaction. A substance that can act as a proton donor or a proton acceptor is called amphiprotic. Water is probably the most common amphiprotic substance we will encounter, but other substances are also amphiprotic.

Example 3 Identify the Brønsted-Lowry acid and the Brønsted-Lowry base in this chemical equation. C6H5OH + NH2− → C6H5O− + NH3 Solution The C6H5OH molecule is losing an H+; it is the proton donor and the Brønsted-Lowry acid. The NH2− ion (called the amide ion) is accepting the H+ ion to become NH3, so it is the Brønsted-Lowry base. Test Yourself Identify the Brønsted-Lowry acid and the Brønsted-Lowry base in this chemical equation. Al(H2O)63+ + H2O → Al(H2O)5(OH)2+ + H3O+ Answer Brønsted-Lowry acid: Al(H2O)63+; Brønsted-Lowry base: H2O

In the reaction between NH3 and H2O,

the chemical reaction does not go to completion; rather, the reverse process occurs as well, and eventually the two processes cancel out any additional change. At this point, we say the chemical reaction is at equilibrium. Both processes still occur, but any net change by one process is countered by the same net change by the other process; it is a dynamic, rather than a static, equilibrium. Because both reactions are occurring, it makes sense to use a double arrow instead of a single arrow:

What do you notice about the reverse reaction? The NH4+ ion is donating a proton to the OH− ion, which is accepting it. This means that the NH4+ ion is acting as the proton donor, or Brønsted-Lowry acid, while OH− ion, the proton acceptor, is acting as a Brønsted-Lowry base. The reverse reaction is also a Brønsted-Lowry acid base reaction:

This means that both reactions are acid-base reactions by the Brønsted-Lowry definition. If you consider the species in this chemical reaction, two sets of similar species exist on both sides. Within each set, the two species differ by a proton in their formulas, and one member of the set is a Brønsted-Lowry acid, while the other member is a Brønsted-Lowry base. These sets are marked here:

The two sets—NH3/NH4+ and H2O/OH−—are called conjugate acid-base pairs. We say that NH4+ is the conjugate acid of NH3, OH− is the conjugate base of H2O, and so forth. Every Brønsted-Lowry acid-base reaction can be labelled with two conjugate acid-base pairs.

Example 4 Identify the conjugate acid-base pairs in this equilibrium. (CH3)3N + H2O ⇄ (CH3)3NH+ + OH– Solution One pair is H2O and OH−, where H2O has one more H+ and is the conjugate acid, while OH− has one less H+ and is the conjugate base. The other pair consists of (CH3)3N and (CH3)3NH+, where (CH3)3NH+ is the conjugate acid (it has an additional proton) and (CH3)3N is the conjugate base. Test Yourself Identify the conjugate acid-base pairs in this equilibrium. NH2– + H2O ⇄ NH3 + OH– Answer H2O (acid) and OH− (base); NH2− (base) and NH3 (acid)

Chemistry Is Everywhere: Household Acids and Bases

Many household products are acids or bases. For example, the owner of a swimming pool may use muriatic acid to clean the pool. Muriatic acid is another name for HCl(aq). In Chapter 5 “Chemical Reactions and Equations”, Section 5.5 “Neutralization Reactions”, vinegar was mentioned as a dilute solution of acetic acid [HC2H3O2(aq)]. In a medicine chest, one may find a bottle of vitamin C tablets; the chemical name of vitamin C is ascorbic acid (HC6H7O6).

One of the more familiar household bases is NH3, which is found in numerous cleaning products. NH3 is a base because it increases the OH− ion concentration by reacting with H2O:

NH3(aq) + H2O(ℓ) → NH4+(aq) + OH−(aq)

Many soaps are also slightly basic because they contain compounds that act as Brønsted-Lowry bases, accepting protons from H2O and forming excess OH− ions. This is one explanation for why soap solutions are slippery.

Perhaps the most dangerous household chemical is the lye-based drain cleaner. Lye is a common name for NaOH, although it is also used as a synonym for KOH. Lye is an extremely caustic chemical that can react with grease, hair, food particles, and other substances that may build up and clog a water pipe. Unfortunately, lye can also attack body tissues and other substances in our bodies. Thus when we use lye-based drain cleaners, we must be very careful not to touch any of the solid drain cleaner or spill the water it was poured into. Safer, nonlye drain cleaners (like the one in the accompanying figure) use peroxide compounds to react on the materials in the clog and clear the drain.

Key Takeaways

A Brønsted-Lowry acid is a proton donor; a Brønsted-Lowry base is a proton acceptor.

Acid-base reactions include two sets of conjugate acid-base pairs.

Exercises

Define Brønsted-Lowry acid. How does it differ from an Arrhenius acid?

Define Brønsted-Lowry base. How does it differ from an Arrhenius base?

Write the dissociation of hydrogen bromide in water as a Brønsted-Lowry acid-base reaction and identify the proton donor and proton acceptor.

Write the dissociation of nitric acid in water as a Brønsted-Lowry acid-base reaction and identify the proton donor and proton acceptor.

Pyridine (C5H5N) acts as a Brønsted-Lowry base in water. Write the hydrolysis reaction for pyridine and identify the Brønsted-Lowry acid and Brønsted-Lowry base.

The methoxide ion (CH3O−) acts as a Brønsted-Lowry base in water. Write the hydrolysis reaction for the methoxide ion and identify the Brønsted-Lowry acid and Brønsted-Lowry base.

Identify the Brønsted-Lowry acid and Brønsted-Lowry base in this chemical equation.

H3PO4 + OH− → H2PO4− + H2O

Identify the Brønsted-Lowry acid and Brønsted-Lowry base in this chemical equation.

H2C2O4 + 2F− → 2HF + C2O42−

Predict the products of this reaction, assuming it undergoes a Brønsted-Lowry acid-base reaction.

HC2H3O2 + C5H5N → ?

Predict the products of this reaction, assuming it undergoes a Brønsted-Lowry acid-base reaction.

(C2H5)3N + H2O → ?

What is the conjugate acid of H2O? of NH3?

What is the conjugate acid of H2PO4−? of NO3−?

What is the conjugate base of HSO4−? of H2O?

What is the conjugate base of H3O+? of H2SO4?

Identify the conjugate acid-base pairs in this reaction.

HSO4− + PO43− → SO42− + HPO42−

Identify the conjugate acid-base pairs in this reaction.

HClO3 + (C2H5)3N → ClO3− + (C2H5)3NH+

Identify the conjugate acid-base pairs in this reaction.

NH3 + C6H5O− → C6H5OH + NH2−

Identify the conjugate acid-base pairs in this reaction.

C5H5NH+ + C2O42− → C5H5N + HC2O4−

Answers

1. A Brønsted-Lowry acid is a proton donor. It does not necessarily increase the H+ concentration in water.

3. HBr + H2O → H3O+ + Br−; PD: HBr; PA: H2O

5. C5H5N + H2O → C5H5NH+ + OH−; PD: H2O; PA: C5H5N

7. BL acid: H3PO4; BL base: OH−

9. C2H3O2− and C5H5NH+

11. H3O+; NH4+

13. SO42−; OH−

15. HSO4− and SO42−; PO43− and HPO42−

17. NH3 and NH2−; C6H5O− and C6H5OH

Chapter 92

13.3 Acid-Base Titrations

Learning Objectives

Describe a titration experiment.

Explain what an indicator does.

Perform a titration calculation correctly.

The reaction of an acid with a base to make a salt and water is a common reaction in the laboratory, partly because so many compounds can act as acids or bases. Another reason that acid-base reactions are so prevalent is because they are often used to determine quantitative amounts of one or the other. Performing chemical reactions quantitatively to determine the exact amount of a reagent is called a titration. A titration can be performed with almost any chemical reaction for which the balanced chemical equation is known. Here, we will consider titrations that involve acid-base reactions.

In a titration, one reagent has a known concentration or amount, while the other reagent has an unknown concentration or amount. Typically, the known reagent (the titrant) is added to the unknown quantity and is dissolved in solution. The unknown amount of substance (the analyte) may or may not be dissolved in solution (but usually is). The titrant is added to the analyte using a precisely calibrated volumetric delivery tube called a burette (also spelled buret; see Figure 13.1 “Equipment for Titrations”). The burette has markings to determine how much volume of solution has been added to the analyte. When the reaction is complete, it is said to be at the equivalence point; the number of moles of titrant can be calculated from the concentration and the volume, and the balanced chemical equation can be used to determine the number of moles (and then concentration or mass) of the unknown reactant.

A burette is a type of liquid dispensing system that can accurately indicate the volume of liquid dispensed.

For example, suppose 25.66 mL (or 0.02566 L) of 0.1078 M HCl was used to titrate an unknown sample of NaOH. What mass of NaOH was in the sample? We can calculate the number of moles of HCl reacted:

# mol HCl = (0.02566 L)(0.1078 M) = 0.002766 mol HCl

We also have the balanced chemical reaction between HCl and NaOH:

HCl + NaOH → NaCl + H2O

So we can construct a conversion factor to convert to number of moles of NaOH reacted:

Then we convert this amount to mass, using the molar mass of NaOH (40.00 g/mol):

This is type of calculation is performed as part of a titration.

Example 5 What mass of Ca(OH)2 is present in a sample if it is titrated to its equivalence point with 44.02 mL of 0.0885 M HNO3? The balanced chemical equation is as follows: 2 HNO3 + Ca(OH)2 → Ca(NO3)2 + 2 H2O Solution In liters, the volume is 0.04402 L. We calculate the number of moles of titrant: # moles HNO3 = (0.04402 L)(0.0885 M) = 0.00390 mol HNO3 Using the balanced chemical equation, we can determine the number of moles of Ca(OH)2 present in the analyte: Then we convert this to a mass using the molar mass of Ca(OH)2: Test Yourself What mass of H2C2O4 is present in a sample if it is titrated to its equivalence point with 18.09 mL of 0.2235 M NaOH? The balanced chemical reaction is as follows: H2C2O4 + 2 NaOH → Na2C2O4 + 2 H2O Answer 0.182 g

How does one know if a reaction is at its equivalence point? Usually, the person performing the titration adds a small amount of an indicator, a substance that changes color depending on the acidity or basicity of the solution. Because different indicators change colors at different levels of acidity, choosing the correct one is important in performing an accurate titration.

Video source: Titration by keyj (https://viuvideos.viu.ca/media/Titration/0_o7ixccav)

Key Takeaways

A titration is the quantitative reaction of an acid and a base.

Indicators are used to show that all the analyte has reacted with the titrant.

Exercises

Define titration.

What is the difference between the titrant and the analyte?

True or false: An acid is always the titrant. Explain your answer.

True or false: An analyte is always dissolved before reaction. Explain your answer.

If 55.60 mL of 0.2221 M HCl was needed to titrate a sample of NaOH to its equivalence point, what mass of NaOH was present?

If 16.33 mL of 0.6664 M KOH was needed to titrate a sample of HC2H3O2 to its equivalence point, what mass of HC2H3O2 was present?

It takes 45.66 mL of 0.1126 M HBr to titrate 25.00 mL of Ca(OH)2 to its equivalence point. What is the original concentration of the Ca(OH)2 solution?

It takes 9.77 mL of 0.883 M H2SO4 to titrate 15.00 mL of KOH to its equivalence point. What is the original concentration of the KOH solution?

Answers

1.

a chemical reaction performed in a quantitative fashion

3.

False; a base can be a titrant, or the reaction being performed may not even be an acid-base reaction.

5.

0.494 g

7.

0.1028 M

Chapter 93

13.4 Strong and Weak Acids and Bases and Their Salts

Learning Objectives

Define a strong and a weak acid and base.

Recognize an acid or a base as strong or weak.

Determine if a salt produces an acidic or a basic solution.

Except for their names and formulas, so far we have treated all acids as equals, especially in a chemical reaction. However, acids can be very different in a very important way. Consider HCl(aq). When HCl is dissolved in H2O, it completely dissociates into H+(aq) and Cl−(aq) ions; all the HCl molecules become ions:

HCl → H+(aq) + Cl−(aq) (100%)

Any acid that dissociates 100% into ions is called a strong acid. If it does not dissociate 100%, it is a weak acid. HC2H3O2 is an example of a weak acid:

HC2H3O2→ H+(aq) + C2H3O2−(aq) (~5%)

Because this reaction does not go 100% to completion, it is more appropriate to write it as an equilibrium:

HC2H3O2 ⇄ H+(aq) + C2H3O2−(aq)

As it turns out, there are very few strong acids, which are given in Table 13.2 “Strong Acids and Bases”. If an acid is not listed here, it is a weak acid. It may be 1% ionized or 99% ionized, but it is still classified as a weak acid.

The issue is similar with bases: a strong base is a base that is 100% ionized in solution. If it is less than 100% ionized in solution, it is a weak base. There are very few strong bases (see Table 13.2 “Strong Acids and Bases”); any base not listed is a weak base. All strong bases are OH– compounds. So a base based on some other mechanism, such as NH3 (which does not contain OH− ions as part of its formula), will be a weak base.

Table 13.2 Strong Acids and Bases

Acids	Bases
HCl	LiOH
HBr	NaOH
HI	KOH
HNO 3	RbOH
H 2 SO 4	CsOH
HClO 3	Mg(OH) 2
HClO 4	Ca(OH) 2
Sr(OH) 2
Ba(OH) 2

Example 6 Identify each acid or base as strong or weak. HCl Mg(OH)2 C5H5N Solution Because HCl is listed in Table 13.2 “Strong Acids and Bases”, it is a strong acid. Because Mg(OH)2 is listed in Table 13.2 “Strong Acids and Bases”, it is a strong base. The nitrogen in C5H5N would act as a proton acceptor and therefore can be considered a base, but because it does not contain an OH compound, it cannot be considered a strong base; it is a weak base. Test Yourself Identify each acid or base as strong or weak. RbOH HNO2 Answers strong base weak acid

Example 7 Write the balanced chemical equation for the dissociation of Ca(OH)2 and indicate whether it proceeds 100% to products or not. Solution This is an ionic compound of Ca2+ ions and OH− ions. When an ionic compound dissolves, it separates into its constituent ions: Ca(OH)2 → Ca2+(aq) + 2OH−(aq) Because Ca(OH)2 is listed in Table 13.2 “Strong Acids and Bases”, this reaction proceeds 100% to products. Test Yourself Write the balanced chemical equation for the dissociation of hydrazoic acid (HN3) and indicate whether it proceeds 100% to products or not. Answer The reaction is as follows: HN3 → H+(aq) + N3−(aq) It does not proceed 100% to products because hydrazoic acid is not a strong acid.

Certain salts will also affect the acidity or basicity of aqueous solutions because some of the ions will undergo hydrolysis, just like NH3 does to make a basic solution. The general rule is that salts with ions that are part of strong acids or bases will not hydrolyze, while salts with ions that are part of weak acids or bases will hydrolyze.

Consider NaCl. When it dissolves in an aqueous solution, it separates into Na+ ions and Cl− ions:

NaCl → Na+(aq) + Cl−(aq)

Will the Na+(aq) ion hydrolyze? If it does, it will interact with the OH− ion to make NaOH:

Na+(aq) + H2O → NaOH + H+(aq)

However, NaOH is a strong base, which means that it is 100% ionized in solution:

NaOH → Na+(aq) + OH−(aq)

The free OH−(aq) ion reacts with the H+(aq) ion to remake a water molecule:

H+(aq) + OH−(aq) → H2O

The net result? There is no change, so there is no effect on the acidity or basicity of the solution from the Na+(aq) ion. What about the Cl− ion? Will it hydrolyze? If it does, it will take an H+ ion from a water molecule:

Cl−(aq) + H2O → HCl + OH−

However, HCl is a strong acid, which means that it is 100% ionized in solution:

HCl → H+(aq) + Cl−(aq)

The free H+(aq) ion reacts with the OH−(aq) ion to remake a water molecule:

H+(aq) + OH−(aq) → H2O

The net result? There is no change, so there is no effect on the acidity or basicity of the solution from the Cl−(aq) ion. Because neither ion in NaCl affects the acidity or basicity of the solution, NaCl is an example of a neutral salt.

Things change, however, when we consider a salt like NaC2H3O2. We already know that the Na+ ion won’t affect the acidity of the solution. What about the acetate ion? If it hydrolyzes, it will take an H+ from a water molecule:

C2H3O2−(aq) + H2O → HC2H3O2 + OH−(aq)

Does this happen? Yes, it does. Why? Because HC2H3O2is a weak acid. Any chance a weak acid has to form, it will (the same with a weak base). As some C2H3O2− ions hydrolyze with H2O to make the molecular weak acid, OH− ions are produced. OH− ions make solutions basic. Thus NaC2H3O2 solutions are slightly basic, so such a salt is called a basic salt.

There are also salts whose aqueous solutions are slightly acidic. NH4Cl is an example. When NH4Cl is dissolved in H2O, it separates into NH4+ ions and Cl− ions. We have already seen that the Cl− ion does not hydrolyze. However, the NH4+ ion will:

NH4+(aq) + H2O → NH3(aq) + H3O+(aq)

Recall from Section 13.1 “Arrhenius Acids and Bases” that H3O+ ion is the hydronium ion, the more chemically proper way to represent the H+ ion. This is the classic acid species in solution, so a solution of NH4+(aq) ions is slightly acidic. NH4Cl is an example of an acid salt. The molecule NH3 is a weak base, and it will form when it can, just like a weak acid will form when it can.

So there are two general rules: (1) If an ion derives from a strong acid or base, it will not affect the acidity of the solution. (2) If an ion derives from a weak acid, it will make the solution basic; if an ion derives from a weak base, it will make the solution acidic.

Example 8 Identify each salt as acidic, basic, or neutral. KCl KNO2 NH4Br Solution The ions from KCl derive from a strong acid (HCl) and a strong base (KOH). Therefore, neither ion will affect the acidity of the solution, so KCl is a neutral salt. Although the K+ ion derives from a strong base (KOH), the NO2− ion derives from a weak acid (HNO2). Therefore the solution will be basic, and KNO2 is a basic salt. Although the Br− ions derive from a strong acid (HBr), the NH4+ ion derives from a weak base (NH3), so the solution will be acidic, and NH4Br is an acidic salt. Test Yourself Identify each salt as acidic, basic, or neutral. (C5H5NH)Cl Na2SO3 Answers acidic basic

Some salts are composed of ions that come from both weak acids and weak bases. The overall effect on an aqueous solution depends on which ion exerts more influence on the overall acidity. We will not consider such salts here.

Key Takeaways

Strong acids and bases are 100% ionized in aqueous solution.

Weak acids and bases are less than 100% ionized in aqueous solution.

Salts of weak acids or bases can affect the acidity or basicity of their aqueous solutions.

Exercises

Differentiate between a strong acid and a weak acid.

Differentiate between a strong base and a weak base.

Identify each as a strong acid or a weak acid. Assume aqueous solutions.

a) HF

b) HCl

c) HC2O4

4. Identify each as a strong base or a weak base. Assume aqueous solutions.

a) NaOH

b) Al(OH)3

c) C4H9NH2

5. Write a chemical equation for the ionization of each acid and indicate whether it proceeds 100% to products or not.

a) HNO3

b) HNO2

c) HI3

6. Write a chemical equation for the ionization of each base and indicate whether it proceeds 100% to products or not.

a) NH3

b) (CH3)3N

c) Mg(OH)2

7. Write the balanced chemical equation for the reaction of each acid and base pair.

a) HCl + C5H5N

b) H2C2O4 + NH3

c) HNO2 + C7H9N

8. Write the balanced chemical equation for the reaction of each acid and base pair.

a) H3C5H5O7 + Mg(OH)2

b) HC3H3O3 + (CH3)3N

c) HBr + Fe(OH)3

9. Identify each salt as neutral, acidic, or basic.

a) NaBr

b) Fe(NO3)2

c) Fe(NO3)3

10. Identify each salt as neutral, acidic, or basic.

a) NH4I

b) C2H5NH3Cl

c) KI

11. Identify each salt as neutral, acidic, or basic.

a) NaNO2

b) NaNO3

c) NH4NO3

12. Identify each salt as neutral, acidic, or basic.

a) KC2H3O2

b) KHSO4

c) KClO3

13. Write the hydrolysis reaction that occurs, if any, when each salt dissolves in water.

a) K2SO3

b) KI

c) NH4ClO3

14. Write the hydrolysis reaction that occurs, if any, when each salt dissolves in water.

a) NaNO3

b) CaC2O4

c) C5H5NHCl

15. When NH4NO2 dissolves in H2O, both ions hydrolyze. Write chemical equations for both reactions. Can you tell if the solution will be acidic or basic overall?

16. When pyridinium acetate (C5H5NHC2H3O2) dissolves in H2O, both ions hydrolyze. Write chemical equations for both reactions. Can you tell if the solution will be acidic or basic overall?

17. A lab technician mixes a solution of 0.015 M Mg(OH)2. Is the resulting OH− concentration greater than, equal to, or less than 0.015 M? Explain your answer.

18. A lab technician mixes a solution of 0.55 M HNO3. Is the resulting H+ concentration greater than, equal to, or less than 0.55 M? Explain your answer.

Answers

1.

A strong acid is 100% ionized in aqueous solution, whereas a weak acid is not 100% ionized.

3.

a) weak acid

b) strong acid

c) weak acid

5.

a) HNO3(aq) → H+(aq) + NO3−(aq); proceeds 100%

b) HNO2(aq) → H+(aq) + NO2−(aq); does not proceed 100%

c) HI3(aq) → H+(aq) + I3−(aq); does not proceed 100%

9.

a) HCl + C5H5N → Cl− + C5H5NH+

b) H2C2O4 + 2NH3 → C2O42− + 2NH4+

c) HNO2 + C7H9N → NO2− + C7H9NH+11.

a) neutral

b) acidic

c) acidic

13.

a) basic

b) neutral

c) acidic

15.

a) SO32− + H2O → HSO3− + OH−

b) no reaction

c) NH4+ + H2O → NH3 + H3O+

17.

NH4+ + H2O → NH3 + H3O+; NO2− + H2O → HNO2 + OH−; it is not possible to determine whether the solution will be acidic or basic.

19.

greater than 0.015 M because there are two OH− ions per formula unit of Mg(OH)2

Chapter 94

13.5 Autoionization of Water

Learning Objectives

Describe the autoionization of water.

Calculate the concentrations of H+ and OH− in solutions, knowing the other concentration.

We have already seen that H2O can act as an acid or a base:

NH3 + H2O → NH4+ + OH− (H2O acts as an acid)
HCl + H2O → H3O+ + Cl− (H2O acts as a base)

It may not surprise you to learn, then, that within any given sample of water, some H2O molecules are acting as acids, and other H2O molecules are acting as bases. The chemical equation is as follows:

H2O + H2O → H3O+ + OH−

This occurs only to a very small degree: only about 6 in 108 H2O molecules are participating in this process, which is called the autoionization of water. At this level, the concentration of both H+(aq) and OH−(aq) in a sample of pure H2O is about 1.0 × 10−7 M. If we use square brackets—[ ]—around a dissolved species to imply the molar concentration of that species, we have

[H+] = [OH−] = 1.0 × 10−7 M

for any sample of pure water because H2O can act as both an acid and a base. The product of these two concentrations is 1.0 × 10−14:

[H+] × [OH−] = (1.0 × 10−7)(1.0 × 10−7) = 1.0 × 10−14

In acids, the concentration of H+(aq)—[H+]—is greater than 1.0 × 10−7 M, while for bases the concentration of OH−(aq)—[OH−]—is greater than 1.0 × 10−7 M. However, the product of the two concentrations—[H+][OH−]—is always equal to 1.0 × 10−14, no matter whether the aqueous solution is an acid, a base, or neutral:

[H+][OH−] = 1.0 × 10−14

This value of the product of concentrations is so important for aqueous solutions that it is called the autoionization constant of water and is denoted Kw:

Kw = [H+][OH−] = 1.0 × 10−14

This means that if you know [H+] for a solution, you can calculate what [OH−] has to be for the product to equal 1.0 × 10−14, or if you know [OH−], you can calculate [H+]. This also implies that as one concentration goes up, the other must go down to compensate so that their product always equals the value of Kw.

Example 9 What is [OH−] of an aqueous solution if [H+] is 1.0 × 10−4 M? Solution Using the expression and known value for Kw, Kw = [H+][OH−] = 1.0 × 10−14 = (1.0 × 10−4)[OH−] We solve by dividing both sides of the equation by 1.0 × 10−4: [OH−] = (1.0×10−14 / 1.0×10−4) = 1.0×10−10 M It is assumed that the concentration unit is molarity, so [OH−] is 1.0 × 10−10 M. Test Yourself What is [H+] of an aqueous solution if [OH−] is 1.0 × 10−9 M? Answer 1.0 × 10−5 M

When you have a solution of a particular acid or base, you need to look at the formula of the acid or base to determine the number of H+ or OH− ions in the formula unit because [H+] or [OH−] may not be the same as the concentration of the acid or base itself.

Example 10 What is [H+] in a 0.0044 M solution of Ca(OH)2? Solution We begin by determining [OH−]. The concentration of the solute is 0.0044 M, but because Ca(OH)2 is a strong base, there are two OH− ions in solution for every formula unit dissolved, so the actual [OH−] is two times this, or 2 × 0.0044 M = 0.0088 M. Now we can use the Kw expression: [H+][OH−] = 1.0 × 10−14 = [H+](0.0088 M) Dividing both sides by 0.0088: [H+]= 1.0×10−14 / (0.0088) = 1.1×10−12 M [H+] has decreased significantly in this basic solution. Test Yourself What is [OH−] in a 0.00032 M solution of H2SO4? (Hint: assume both H+ ions ionize.) Answer 1.6 × 10−11 M

For strong acids and bases, [H+] and [OH−] can be determined directly from the concentration of the acid or base itself because these ions are 100% ionized by definition. However, for weak acids and bases, this is not so. The degree, or percentage, of ionization would need to be known before we can determine [H+] and [OH−].

Example 11 A 0.0788 M solution of HC2H3O2 is 3.0% ionized into H+ ions and C2H3O2− ions. What are [H+] and [OH−] for this solution? Solution Because the acid is only 3.0% ionized, we can determine [H+] from the concentration of the acid. Recall that 3.0% is 0.030 in decimal form: [H+] = 0.030 × 0.0788 = 0.00236 M With this [H+], then [OH−] can be calculated as follows: [OH−] = 1.0×10−14 / 0.00236 = 4.2×10−12 M This is about 30 times higher than would be expected for a strong acid of the same concentration. Test Yourself A 0.0222 M solution of pyridine (C5H5N) is 0.44% ionized into pyridinium ions (C5H5NH+) and OH− ions. What are [OH−] and [H+] for this solution? Answer [OH−] = 9.77 × 10−5 M; [H+] = 1.02 × 10−10 M

Key Takeaways

In any aqueous solution, the product of [H+] and [OH−] equals 1.0 × 10−14.

Exercises

Does [H+] remain constant in all aqueous solutions? Why or why not?

Does [OH−] remain constant in all aqueous solutions? Why or why not?

What is the relationship between [H+] and Kw? Write a mathematical expression that relates them.

What is the relationship between [OH−] and Kw? Write a mathematical expression that relates them.

Write the chemical equation for the autoionization of water and label the conjugate acid-base pairs.

Write the reverse of the reaction for the autoionization of water. It is still an acid-base reaction? If so, label the acid and base.

For a given aqueous solution, if [H+] = 1.0 × 10−3 M, what is [OH−]?

For a given aqueous solution, if [H+] = 1.0 × 10−9 M, what is [OH−]?

For a given aqueous solution, if [H+] = 7.92 × 10−5 M, what is [OH−]?

For a given aqueous solution, if [H+] = 2.07 × 10−11 M, what is [H+]?

For a given aqueous solution, if [OH−] = 1.0 × 10−5 M, what is [H+]?

For a given aqueous solution, if [OH−] = 1.0 × 10−12 M, what is [H+]?

For a given aqueous solution, if [OH−] = 3.77 × 10−4 M, what is [H+]?

For a given aqueous solution, if [OH−] = 7.11 × 10−10 M, what is [H+]?

What are [H+] and [OH−] in a 0.344 M solution of HNO3?

What are [H+] and [OH−] in a 2.86 M solution of HBr?

What are [H+] and [OH−] in a 0.00338 M solution of KOH?

What are [H+] and [OH−] in a 6.02 × 10−4 M solution of Ca(OH)2?

If HNO2 is dissociated only to an extent of 0.445%, what are [H+] and [OH−] in a 0.307 M solution of HNO2?

If (C2H5)2NH is dissociated only to an extent of 0.077%, what are [H+] and [OH−] in a 0.0955 M solution of (C2H5)2NH?

Answers

1.

[H+] varies with the amount of acid or base in a solution.

3.

[H+] = Kw[OH−]

5.

H2O + H2O → H3O+ + OH−; H2O/H3O+ and H2O/OH−7.

1.0 × 10−11 M

9.

1.26 × 10−10 M

11.

1.0 × 10−9 M

13.

2.65 × 10−11 M

15.

[H+] = 0.344 M; [OH−] = 2.91 × 10−14 M

17.

[OH−] = 0.00338 M; [H+] = 2.96 × 10−12 M

19.

[H+] = 0.00137 M; [OH−] = 7.32 × 10−12 M

Chapter 95

13.6 The pH Scale

Learning Objectives

Define pH.

Determine the pH of acidic and basic solutions.

As we have seen, [H+] and [OH−] values can be markedly different from one aqueous solution to another. So chemists defined a new scale that succinctly indicates the concentrations of either of these two ions.

pH is a logarithmic function of [H+]:

pH = −log[H+]

pH is usually (but not always) between 0 and 14. Knowing the dependence of pH on [H+], we can summarize as follows:

If pH < 7, then the solution is acidic.

If pH = 7, then the solution is neutral.

If pH > 7, then the solution is basic.

This is known as the pH scale. You can use pH to make a quick determination whether a given aqueous solution is acidic, basic, or neutral.

Example 12 Label each solution as acidic, basic, or neutral based only on the stated pH. milk of magnesia, pH = 10.5 pure water, pH = 7 wine, pH = 3.0 Solution With a pH greater than 7, milk of magnesia is basic. (Milk of magnesia is largely Mg(OH)2.) Pure water, with a pH of 7, is neutral. With a pH of less than 7, wine is acidic. Test Yourself Identify each substance as acidic, basic, or neutral based only on the stated pH. human blood, pH = 7.4 household ammonia, pH = 11.0 cherries, pH = 3.6 Answers basic basic acidic

Table 13.3 “Typical pH Values of Various Substances*” gives the typical pH values of some common substances. Note that several food items are on the list, and most of them are acidic

Table 13.3 Typical pH Values of Various Substances*

Substance	pH
stomach acid	1.7
lemon juice	2.2
vinegar	2.9
soda	3.0
wine	3.5
coffee, black	5.0
milk	6.9
pure water	7.0
blood	7.4
seawater	8.5
milk of magnesia	10.5
ammonia solution	12.5
1.0 M NaOH	14.0
*Actual values may vary depending on conditions.

pH is a logarithmic scale. A solution that has a pH of 1.0 has 10 times the [H+] as a solution with a pH of 2.0, which in turn has 10 times the [H+] as a solution with a pH of 3.0 and so forth.

Using the definition of pH, it is also possible to calculate [H+] (and [OH−]) from pH and vice versa. The general formula for determining [H+] from pH is as follows:

[H+] = 10−pH

You need to determine how to evaluate the above expression on your calculator. Ask your instructor if you have any questions. The other issue that concerns us here is significant figures. Because the number(s) before the decimal point in a logarithm relate to the power on 10, the number of digits after the decimal point is what determines the number of significant figures in the final answer:

Example 13 What are [H+] and [OH−] for an aqueous solution whose pH is 4.88? Solution We need to evaluate the expression [H+] = 10−4.88 Depending on the calculator you use, the method for solving this problem will vary. In some cases, the “−4.88” is entered and a “10x” key is pressed; for other calculators, the sequence of keystrokes is reversed. In any case, the correct numerical answer is as follows: [H+] = 1.3 × 10−5 M Because 4.88 has two digits after the decimal point, [H+] is limited to two significant figures. From this, [OH−] can be determined: [OH−] = 1×10−14 / 1.3×10−5 = 7.7×10−10 M Test Yourself What are [H+] and [OH−] for an aqueous solution whose pH is 10.36? Answer [H+] = 4.4 × 10−11 M; [OH−] = 2.3 × 10−4 M

There is an easier way to relate [H+] and [OH−]. We can also define pOH similar to pH:

pOH = −log[OH−]

(In fact, p“anything” is defined as the negative logarithm of that anything.) This also implies that

[OH−] = 10−pOH

A simple and useful relationship is that for any aqueous solution,

pH + pOH = 14

This relationship makes it simple to determine pH from pOH or pOH from pH and then calculate the resulting ion concentration.

Example 14 The pH of a solution is 8.22. What are pOH, [H+], and [OH−]? Solution Because the sum of pH and pOH equals 14, we have 8.22 + pOH = 14 Subtracting 8.22 from 14, we get pOH = 5.78 Now we evaluate the following two expressions: [H+] = 10−8.22
[OH−] = 10−5.78 So [H+] = 6.0 × 10−9 M
[OH−] = 1.7 × 10−6 M Test Yourself The pOH of a solution is 12.04. What are pH, [H+], and [OH−]? Answer pH = 1.96; [H+] = 1.1 × 10−2 M; [OH−] = 9.1 × 10−13 M

Key Takeaways

pH is a logarithmic function of [H+].

[H+] can be calculated directly from pH.

pOH is related to pH and can be easily calculated from pH.

Exercises

Define pH. How is it related to pOH?

Define pOH. How is it related to pH?

What is the pH range for an acidic solution?

What is the pH range for a basic solution?

What is [H+] for a neutral solution?

What is [OH−] for a neutral solution? Compare your answer to Exercise 6. Does this make sense?

Which substances in Table 13.3 “Typical pH Values of Various Substances*” are acidic?

Which substances in Table 13.3 “Typical pH Values of Various Substances*” are basic?

What is the pH of a solution when [H+] is 3.44 × 10−4 M?

What is the pH of a solution when [H+] is 9.04 × 10−13 M?

What is the pH of a solution when [OH−] is 6.22 × 10−7 M?

What is the pH of a solution when [OH−] is 0.0222 M?

What is the pOH of a solution when [H+] is 3.44 × 10−4 M?

What is the pOH of a solution when [H+] is 9.04 × 10−13 M?

What is the pOH of a solution when [OH−] is 6.22 × 10−7 M?

What is the pOH of a solution when [OH−] is 0.0222 M?

If a solution has a pH of 0.77, what is its pOH, [H+], and [OH−]?

If a solution has a pOH of 13.09, what is its pH, [H+], and [OH−]?

Answers

1.

pH is the negative logarithm of [H+] and is equal to 14 − pOH.

3.

pH < 7

5.

1.0 × 10−7 M

7.

Every entry above pure water is acidic.

9.

3.46

11.

7.79

13.

10.54

15.

6.21

17.

pOH = 13.23; [H+] = 1.70 × 10−1 M; [OH−] = 5.89 × 10−14 M

Chapter 96

13.7 Buffers

Learning Objectives

Define buffer.

Correctly identify the two components of a buffer.

As indicated in Section 13.4 “Strong and Weak Acids and Bases and Their Salts”, weak acids are relatively common, even in the foods we eat. But we occasionally encounter a strong acid or base, such as stomach acid, which has a strongly acidic pH of 1.7. By definition, strong acids and bases can produce a relatively large amount of H+ or OH− ions and consequently have marked chemical activities. In addition, very small amounts of strong acids and bases can change the pH of a solution very quickly. If 1 mL of stomach acid [approximated as 0.1 M HCl(aq)] were added to the bloodstream and no correcting mechanism were present, the pH of the blood would decrease from about 7.4 to about 4.7—a pH that is not conducive to continued living. Fortunately, the body has a mechanism for minimizing such dramatic pH changes.

The mechanism involves a buffer, a solution that resists dramatic changes in pH. Buffers do so by being composed of certain pairs of solutes: either a weak acid plus a salt derived from that weak acid or a weak base plus a salt of that weak base. For example, a buffer can be composed of dissolved HC2H3O2 (a weak acid) and NaC2H3O2 (the salt derived from that weak acid). Another example of a buffer is a solution containing NH3 (a weak base) and NH4Cl (a salt derived from that weak base).

Let us use an HC2H3O2/NaC2H3O2 buffer to demonstrate how buffers work. If a strong base—a source of OH−(aq) ions—is added to the buffer solution, those OH− ions will react with the HC2H3O2 in an acid-base reaction:

HC2H3O2(aq) + OH−(aq) → H2O(ℓ) + C2H3O2−(aq)

Rather than changing the pH dramatically by making the solution basic, the added OH− ions react to make H2O, so the pH does not change much.

If a strong acid—a source of H+ ions—is added to the buffer solution, the H+ ions will react with the anion from the salt. Because HC2H3O2 is a weak acid, it is not ionized much. This means that if lots of H+ ions and C2H3O2− ions are present in the same solution, they will come together to make HC2H3O2:

H+(aq) + C2H3O2−(aq) → HC2H3O2(aq)

Rather than changing the pH dramatically and making the solution acidic, the added H+ ions react to make molecules of a weak acid. Figure 13.2 “The Actions of Buffers” illustrates both actions of a buffer.

Buffers can react with both strong acids (top) and strong bases (side) to minimize large changes in pH.

Buffers made from weak bases and salts of weak bases act similarly. For example, in a buffer containing NH3 and NH4Cl, NH3 molecules can react with any excess H+ ions introduced by strong acids:

NH3(aq) + H+(aq) → NH4+(aq)

while the NH4+(aq) ion can react with any OH− ions introduced by strong bases:

NH4+(aq) + OH−(aq) → NH3(aq) + H2O(ℓ)

Example 15 Which combinations of compounds can make a buffer solution? HCHO2 and NaCHO2 HCl and NaCl CH3NH2 and CH3NH3Cl NH3 and NaOH Solution HCHO2 is formic acid, a weak acid, while NaCHO2 is the salt made from the anion of the weak acid (the formate ion [CHO2−]). The combination of these two solutes would make a buffer solution. HCl is a strong acid, not a weak acid, so the combination of these two solutes would not make a buffer solution. CH3NH2 is methylamine, which is like NH3 with one of its H atoms substituted with a CH3 group. Because it is not listed in Table 13.2 “Strong Acids and Bases”, we can assume that it is a weak base. The compound CH3NH3Cl is a salt made from that weak base, so the combination of these two solutes would make a buffer solution. NH3 is a weak base, but NaOH is a strong base. The combination of these two solutes would not make a buffer solution. Test Yourself Which combinations of compounds can make a buffer solution? NaHCO3 and NaCl H3PO4 and NaH2PO4 NH3 and (NH4)3PO4 NaOH and NaCl Answers no yes yes no

Buffers work well only for limited amounts of added strong acid or base. Once either solute is completely reacted, the solution is no longer a buffer, and rapid changes in pH may occur. We say that a buffer has a certain capacity. Buffers that have more solute dissolved in them to start with have larger capacities, as might be expected.

Human blood has a buffering system to minimize extreme changes in pH. One buffer in blood is based on the presence of HCO3− and H2CO3 [the second compound is another way to write CO2(aq)]. With this buffer present, even if some stomach acid were to find its way directly into the bloodstream, the change in the pH of blood would be minimal. Inside many of the body’s cells, there is a buffering system based on phosphate ions.

Food and Drink App: The Acid That Eases Pain

Although medicines are not exactly “food and drink,” we do ingest them, so let’s take a look at an acid that is probably the most common medicine: acetylsalicylic acid, also known as aspirin. Aspirin is well known as a pain reliever and antipyretic (fever reducer).

The structure of aspirin is shown in the accompanying figure. The acid part is circled; it is the H atom in that part that can be donated as aspirin acts as a Brønsted-Lowry acid. Because it is not given in Table 13.2 “Strong Acids and Bases”, acetylsalicylic acid is a weak acid. However, it is still an acid, and given that some people consume relatively large amounts of aspirin daily, its acidic nature can cause problems in the stomach lining, despite the stomach’s defenses against its own stomach acid.

Because the acid properties of aspirin may be problematic, many aspirin brands offer a “buffered aspirin” form of the medicine. In these cases, the aspirin also contains a buffering agent—usually MgO—that regulates the acidity of the aspirin to minimize its acidic side effects.

As useful and common as aspirin is, it was formally marketed as a drug starting in 1899. The US Food and Drug Administration (FDA), the governmental agency charged with overseeing and approving drugs in the United States, wasn’t formed until 1906. Some have argued that if the FDA had been formed before aspirin was introduced, aspirin may never have gotten approval due to its potential for side effects—gastrointestinal bleeding, ringing in the ears, Reye’s syndrome (a liver problem), and some allergic reactions. However, recently aspirin has been touted for its effects in lessening heart attacks and strokes, so it is likely that aspirin is here to stay.

Key Takeaways

A buffer is a solution that resists sudden changes in pH.

Exercises

Define buffer. What two related chemical components are required to make a buffer?

Can a buffer be made by combining a strong acid with a strong base? Why or why not?

Which combinations of compounds can make a buffer? Assume aqueous solutions.

a) HCl and NaCl

b) HNO2 and NaNO2

c) NH4NO3 and HNO3

d) NH4NO3 and NH3

4. Which combinations of compounds can make a buffer? Assume aqueous solutions.

a) H3PO4 and Na3PO4

b) NaHCO3 and Na2CO3

c) NaNO3 and Ca(NO3)2

d) HN3 and NH3

5. For each combination in Exercise 3 that is a buffer, write the chemical equations for the reactions of the buffer components when a strong acid and a strong base is added.

6. For each combination in Exercise 4 that is a buffer, write the chemical equations for the reactions of the buffer components when a strong acid and a strong base is added.

7. The complete phosphate buffer system is based on four substances: H3PO4, H2PO4−, HPO42−, and PO43−. What different buffer solutions can be made from these substances?

8. Explain why NaBr cannot be a component in either an acidic or a basic buffer.

9. Two solutions are made containing the same concentrations of solutes. One solution is composed of H3PO4 and Na3PO4, while the other is composed of HCN and NaCN. Which solution should have the larger capacity as a buffer?

10. Two solutions are made containing the same concentrations of solutes. One solution is composed of NH3 and NH4NO3, while the other is composed of H2SO4 and Na2SO4. Which solution should have the larger capacity as a buffer?

Answers

1.

A buffer is the combination of a weak acid or base and a salt of that weak acid or base.

3.

a) no

b) yes

c) no

d) yes

5.

3b: strong acid: NO2− + H+ → HNO2; strong base: HNO2 + OH− → NO2− + H2O; 3d: strong base: NH4+ + OH− → NH3 + H2O; strong acid: NH3 + H+ → NH4+

7.

Buffers can be made from three combinations: (1) H3PO4 and H2PO4−, (2) H2PO4− and HPO42−, and (3) HPO42− and PO43−. (Technically, a buffer can be made from any two components.)

9.

The phosphate buffer should have the larger capacity.

Chapter 97

13.8 End-of-Chapter Material

Additional Exercises

Write the balanced chemical equation between Zn metal and HCl(aq). The other product is ZnCl2.

Write the neutralization reaction in which ZnCl2, also found in Exercise 1, is the salt product.

Why isn’t an oxide compound like CaO considered a salt? (Hint: what acid-base combination would be needed to make it if it were a salt?)

Metal oxides are considered basic because they react with H2O to form OH compounds. Write the chemical equation for a reaction that forms a base when CaO is combined with H2O.

Write the balanced chemical equation between aluminum hydroxide and sulfuric acid.

Write the balanced chemical equation between phosphoric acid and barium hydroxide.

Write the equation for the chemical reaction that occurs when caffeine (C8H10N4O2) acts as a Brønsted-Lowry base.

Citric acid (C6H8O7) is the acid found in citrus fruits. It can lose a maximum of three H+ ions in the presence of a base. Write the chemical equations for citric acid acting stepwise as a Brønsted-Lowry acid.

Can an amphiprotic substance be a strong acid and a strong base at the same time? Explain your answer.

Can an amphiprotic substance be a weak acid and a weak base at the same time? If so, explain why and give an example.

Under what conditions will the equivalence point of a titration be slightly acidic?

Under what conditions will the equivalence point of a titration be slightly basic?

Write the chemical equation for the autoionization of NH3.

Write the chemical equation for the autoionization of HF.

What is the pOH range for an acidic solution?

What is the pOH range for a basic solution?

The concentration of commercial HCl is about 12 M. What is its pH and pOH?

The concentration of concentrated H2SO4 is about 18 M. Assuming only one H+ comes off the H2SO4 molecule, what is its pH and pOH? What would the pH and pOH be if the second H+ were also ionized?

Answers

1.

Zn + 2HCl → ZnCl2 + H2

3.

The O2− ion would come from H2O, which is not considered a classic acid in the Arrhenius sense.

5.

2Al(OH)3 + 3 H2SO4 → Al2(SO4)3 + 6 H2O

7.

C8H10N4O2 + H2O → C8H10N4O2H+ + OH−; the H+ ion attaches to one of the N atoms in the caffeine molecule.

9.

As a strong acid or base, an amphiprotic substance reacts 100% as an acid or a base, so it cannot be a base or an acid at the same time.

11.

if the salt produced is an acidic salt

13.

NH3 + NH3 → NH4+ + NH2−

15.

pOH > 7

17.

pH = −1.08; pOH = 15.08

PART X

Unit 10 Equilibrium

Chapter 98

Chapter 14. Chemical Equilibrium

Introduction to Chemical Equilibrium

Imagine you are stranded in a rowboat in the middle of the ocean. Suddenly, your boat springs a small leak, and you need to bail out water. You grab a bucket and begin to bail. After a few minutes, your efforts against the leak keep the water to only about half an inch, but any further bailing doesn’t change the water level; the leak brings in as much water as you bail out.

You are at equilibrium. Two opposing processes have reached the same speed, and there is no more overall change in the process.

Chemical reactions are like that as well. Most of them come to an equilibrium. The actual position of the equilibrium—whether it favors the reactants or the products—is characteristic of a chemical reaction; it is difficult to see just by looking at the balanced chemical equation. But chemistry has tools to help you understand the equilibrium of chemical reactions—the focus of our study in this chapter.

So far in this text, when we present a chemical reaction, we have implicitly assumed that the reaction goes to completion. Indeed, our stoichiometric calculations were based on this; when we asked how much of a product is produced when so much of a reactant reacts, we are assuming that all of a reactant reacts. However, this is usually not the case; many reactions do not go to completion, and many chemists have to deal with that. In this chapter, we will study this phenomenon and see ways in which we can affect the extent of chemical reactions.

Chapter 99

14.1 Chemical Equilibrium

Learning Objectives

Define chemical equilibrium.

Recognize chemical equilibrium as a dynamic process.

Consider the following reaction occurring in a closed container (so that no material can go in or out):

H2 + I2 → 2 HI

This is simply the reaction between elemental hydrogen and elemental iodine to make hydrogen iodide. The way the equation is written, we are led to believe that the reaction goes to completion, that all the H2 and the I2 react to make HI.

However, this is not the case. The reverse chemical reaction is also taking place:

2 HI → H2 + I2

It acts to undo what the first reaction does. Eventually, the reverse reaction proceeds so quickly that it matches the speed of the forward reaction. When that happens, any continued overall reaction stops: the reaction has reached chemical equilibrium (sometimes just spoken as equilibrium; plural equilibria), the point at which the forward and reverse processes balance each other’s progress.

Because two opposing processes are occurring at once, it is conventional to represent an equilibrium using a double arrow, like this:

H2 + I2 ⇄ 2 HI

The double arrow implies that the reaction is going in both directions. Note that the reaction must still be balanced.

Example 1 Write the equilibrium equation that exists between calcium carbonate as a reactant and calcium oxide and carbon dioxide as products. Solution As this is an equilibrium situation, a double arrow is used. The equilibrium equation is written as follows: CaCO3 ⇄ CaO + CO2 Test Yourself Write the equilibrium equation between elemental hydrogen and elemental oxygen as reactants and water as the product. Answer 2 H2 + O2 ⇄ 2 H2O

One thing to note about equilibrium is that the reactions do not stop; both the forward reaction and the reverse reaction continue to occur. They both occur at the same rate, so any overall change by one reaction is cancelled by the reverse reaction. We say that chemical equilibrium is dynamic, rather than static. Also, because both reactions are occurring simultaneously, the equilibrium can be written backward. For example, representing an equilibrium as

H2+ I2 ⇄ 2 HI

is the same thing as representing the same equilibrium as

2 HI ⇄ H2 + I2

The reaction must be at equilibrium for this to be the case, however.

Key Takeaways

Chemical reactions eventually reach equilibrium, a point at which forward and reverse reactions balance each other’s progress.

Chemical equilibria are dynamic: the chemical reactions are always occurring; they just cancel each other’s progress.

Exercises

Define chemical equilibrium. Give an example.

Explain what is meant when it is said that chemical equilibrium is dynamic.

Write the equilibrium equation between elemental hydrogen and elemental chlorine as reactants and hydrochloric acid as the product.

Write the equilibrium equation between iron(III) sulfate as the reactant and iron(III) oxide and sulfur trioxide as the products.

Graphite and diamond are two forms of elemental carbon. Write the equilibrium equation between these two forms in two different ways.

At 1,500 K, iodine molecules break apart into iodine atoms. Write the equilibrium equation between these two species in two different ways.

Answers

1.

the situation when the forward and reverse chemical reactions occur, leading to no additional net change in the reaction position; H2+ I2 ⇄ 2 HI (answers will vary)

3.

H2+ Cl2 ⇄ 2 HCl

5.

C (gra) ⇄ C (dia); C (dia) ⇄ C (gra)

Chapter 100

14.2 The Equilibrium Constant

Learning Objectives

Explain the importance of the equilibrium constant.

Construct an equilibrium constant expression for a chemical reaction.

In the mid 1860s, Norwegian scientists C. M. Guldberg and P. Waage noted a peculiar relationship between the amounts of reactants and products in an equilibrium. No matter how many reactants they started with, a certain ratio of reactants and products was achieved at equilibrium. Today, we call this observation the law of mass action. It relates the amounts of reactants and products at equilibrium for a chemical reaction. For a general chemical reaction occurring in solution,

aA + bB ⇄ cC + dD

the equilibrium constant, also known as Keq, is defined by the following expression:

where [A] is the molar concentration of species A at equilibrium, and so forth. The coefficients a, b, c, and d in the chemical equation become exponents in the expression for Keq. The Keq is a characteristic numerical value for a given reaction at a given temperature; that is, each chemical reaction has its own characteristic Keq. The concentration of each reactant and product in a chemical reaction at equilibrium is related; the concentrations cannot be random values, but they depend on each other. The numerator of the expression for Keq has the concentrations of every product (however many products there are), while the denominator of the expression for Keq has the concentrations of every reactant, leading to the common products over reactants definition for the Keq.

Let us consider a simple example. Suppose we have this equilibrium:

A ⇄ B

There is one reactant, one product, and the coefficients on each are just 1 (assumed, not written). The Keq expression for this equilibrium is

(Exponents of 1 on each concentration are understood.) Suppose the numerical value of Keq for this chemical reaction is 2.0. If [B] = 4.0 M, then [A] must equal 2.0 M so that the value of the fraction equals 2.0:

By convention, the units are understood to be M and are omitted from the Keq expression. Suppose [B] were 6.0 M. For the Keq value to remain constant (it is, after all, called the equilibrium constant), then [A] would have to be 3.0 M at equilibrium:

If [A] were not equal to 3.0 M, the reaction would not be at equilibrium, and a net reaction would occur until that ratio was indeed 2.0. At that point, the reaction is at equilibrium, and any net change would cease. (Recall, however, that the forward and reverse reactions do not stop because chemical equilibrium is dynamic.)

The issue is the same with more complex expressions for the Keq; only the mathematics becomes more complex. Generally speaking, given a value for the Keq and all but one concentration at equilibrium, the missing concentration can be calculated.

Example 2 Given the following reaction: H2+ I2 ⇄ 2 HI If the equilibrium [HI] is 0.75 M and the equilibrium [H2] is 0.20 M, what is the equilibrium [I2] if the Keq is 0.40? Solution We start by writing the Keq expression. Using the products over reactants approach, the Keq expression is as follows: Note that [HI] is squared because of the coefficient 2 in the balanced chemical equation. Substituting for the equilibrium [H2] and [HI] and for the given value of Keq: To solve for [I2], we have to do some algebraic rearrangement: divide the 0.40 into both sides of the equation and multiply both sides of the equation by [I2]. This brings [I2] into the numerator of the left side and the 0.40 into the denominator of the right side: Solving, [I2] = 7.0 M The concentration unit is assumed to be molarity. This value for [I2] can be easily verified by substituting 0.75, 0.20, and 7.0 into the expression for Keq and evaluating: you should get 0.40, the numerical value of Keq (and you do). Test Yourself Given the following reaction: H2+ I2 ⇄ 2 HI If the equilibrium [HI] is 0.060 M and the equilibrium [I2] is 0.90 M, what is the equilibrium [H2] if the Keq is 0.40? Answer 0.010 M

In some types of equilibrium problems, square roots, cube roots, or even higher roots need to be analyzed to determine a final answer. Make sure you know how to perform such operations on your calculator; if you do not know, ask your instructor for assistance.

Example 3 The following reaction is at equilibrium: N2+ 3 H2 ⇄ 2 NH3 The Keq at a particular temperature is 13.7. If the equilibrium [N2] is 1.88 M and the equilibrium [NH3] is 6.62 M, what is the equilibrium [H2]? Solution We start by writing the Keq expression from the balanced chemical equation: Substituting for the known equilibrium concentrations and the Keq, this becomes Rearranging algebraically and then evaluating the numerical expression, we get To solve for [H2], we need to take the cube root of the equation. Performing this operation, we get [H2] = 1.15 M You should verify that this is correct using your own calculator to confirm that you know how to do a cube root correctly. Test Yourself The following reaction is at equilibrium: N2 + 3 H2 ⇄ 2 NH3 The Keq at a particular temperature is 13.7. If the equilibrium [N2] is 0.055 M and the equilibrium [H2] is 1.62 M, what is the equilibrium [NH3]? Answer 1.79 M

The Keq was defined earlier in terms of concentrations. For gas-phase reactions, the Keq can also be defined in terms of the partial pressures of the reactants and products, Pi. For the gas-phase reaction

aA(g) + bB(g) ⇄ cC(g) + dD(g)

the pressure-based equilibrium constant, KP, is defined as follows:

where PA is the partial pressure of substance A at equilibrium in atmospheres, and so forth. As with the concentration-based equilibrium constant, the units are omitted when substituting into the expression for KP.

Example 4 What is the KP for this reaction, given the equilibrium partial pressures of 0.664 atm for NO2 and 1.09 for N2O4? 2 NO2(g) ⇄ N2O4(g) Solution Write the KP expression for this reaction: Then substitute the equilibrium partial pressures into the expression and evaluate: Test Yourself What is the KP for this reaction, given the equilibrium partial pressures of 0.44 atm for H2, 0.22 atm for Cl2, and 2.98 atm for HCl? H2 + Cl2 ⇄ 2 HCl Answer 91.7

There is a simple relationship between Keq (based on concentration units) and KP (based on pressure units):

where R is the ideal gas law constant (in units of L·atm/mol·K), T is the absolute temperature, and Δn is the change in the number of moles of gas in the balanced chemical equation, defined as ngas,prods − ngas,rcts. Note that this equation implies that if the number of moles of gas are the same in reactants and products, Keq = KP.

Example 5 What is the KP at 25°C for this reaction if the Keq is 4.2 × 10−2? N2(g) + 3 H2(g) ⇄ 2 NH3(g) Solution Before we use the relevant equation, we need to do two things: convert the temperature to kelvins and determine Δn. Converting the temperature is easy: T = 25 + 273 = 298 K To determine the change in the number of moles of gas, take the number of moles of gaseous products and subtract the number of moles of gaseous reactants. There are 2 mol of gas as product and 4 mol of gas of reactant: Δn = 2 − 4 = −2 mol Note that Δn is negative. Now we can substitute into our equation, using R = 0.08205 L·atm/mol·K. The units are omitted for clarity: KP = (4.2 × 10−2)(0.08205)(298)−2 Solving, KP = 7.0 × 10−5 Test Yourself What is the KP at 25°C for this reaction if the Keq is 98.3? I2(g) ⇄ 2 I(g) Answer 2.40 × 103

Finally, we recognize that many chemical reactions involve substances in the solid or liquid phases. For example, a particular chemical reaction is represented as follows:

2 NaHCO3(s) ⇄ Na2CO3(s) + CO2(g) + H2O(ℓ)

This chemical equation includes all three phases of matter. This kind of equilibrium is called a heterogeneous equilibrium because there is more than one phase present.

The rule for heterogeneous equilibria is as follows: Do not include the concentrations of pure solids and pure liquids in Keq expressions. Only partial pressures for gas-phase substances or concentrations in solutions are included in the expressions of equilibrium constants. As such, the equilibrium constant expression for this reaction would simply be

KP = PCO2

because the two solids and one liquid would not appear in the expression.

Key Takeaways

Every chemical equilibrium can be characterized by an equilibrium constant, known as Keq.

The Keq and KP expressions are formulated as amounts of products divided by amounts of reactants; each amount (either a concentration or a pressure) is raised to the power of its coefficient in the balanced chemical equation.

Solids and liquids do not appear in the expression for the equilibrium constant.

Exercises

Define the law of mass action.

What is an equilibrium constant for a chemical reaction? How is it constructed?

Write the Keq expression for each reaction.

a) H2 + Cl2 ⇄ 2 HCl

b) NO + NO2 ⇄ N2O3

4. Write the Keq expression for each reaction.

a) C2H5OH + NaI ⇄ C2H5I + NaOH

b) PCl3 + Cl2 ⇄ PCl5

5. Write the KP expression for each reaction.

a) 2 H2(g) + O2(g) ⇄ 2 H2O(g)

b) 2 H2O2(g) ⇄ 2 H2O(g) + O2(g)

6. Write the KP expression for each reaction.

a) CH4(g) + 2 O2(g) ⇄ CO2(g) + 2 H2O(g)

b) CH4(g) + 4 Cl2(g) ⇄ CCl4(g) + 4 HCl(g)

7. The following reaction is at equilibrium:

PBr3 + Br2 ⇄ PBr5

The equilibrium [Br2] and [PBr5] are 2.05 M and 0.55 M, respectively. If the Keq is 1.65, what is the equilibrium [PBr3]?

8. The following reaction is at equilibrium:

CO + Cl2 ⇄ COCl2

The equilibrium [CO] and [Cl2] are 0.088 M and 0.103 M, respectively. If the Keq is 0.225, what is the equilibrium [COCl2]?

9. The following reaction is at equilibrium:

CH4 + 2 Cl2 ⇄ CH2Cl2 + 2 HCl

If [CH4] is 0.250 M, [Cl2] is 0.150 M, and [CH2Cl2] is 0.175 M at equilibrium, what is [HCl] at equilibrium if the Keq is 2.30?

10. The following reaction is at equilibrium:

4 HBr + O2 ⇄ 2 H2O + 2 Br2

If [HBr] is 0.100 M, [O2] is 0.250 M, and [H2O] is 0.0500 M at equilibrium, what is [Br2] at equilibrium if the Keq is 0.770?

11. Write the KP expression for the following gas-phase reaction:

4 NO2(g) + O2(g) ⇄ 2 N2O5(g)

12. Write the KP expression for the following gas-phase reaction:

ClO(g) + O3(g) ⇄ ClO2(g) + O2(g)

13. What is the equilibrium partial pressure of COBr2 if the equilibrium partial pressures of CO and Br2 are 0.666 atm and 0.235 atm and the KP for this equilibrium is 4.08?

CO(g) + Br2(g) ⇄ COBr2(g)

14. What is the equilibrium partial pressure of O3 if the equilibrium partial pressure of O2 is 0.0044 atm and KP for this equilibrium is 0.00755?

3 O2(g) ⇄ 2 O3(g)

15. Calculate the KP for this reaction at 298 K if the Keq = 1.76 × 10−3.

3 O2(g) ⇄ 2 O3(g)

16. Calculate the KP for this reaction at 310 K if the Keq = 6.22 × 103.

4 NO2(g) + O2(g) ⇄ 2 N2O5(g)

17. Calculate the Keq for this reaction if the KP = 5.205 × 10−3 at 660°C.

CO(g) + F2(g) ⇄ COF2(g)

18. Calculate the Keq for this reaction if the KP = 78.3 at 100°C.

4 HCl(g) + O2(g) ⇄ 2 H2O(g) + 2 Cl2(g)

19. Write the correct Keq expression for this reaction.

NaOH(aq) + HCl(aq) ⇄ NaCl(aq) + H2O(ℓ)

20. Write the correct Keq expression for this reaction.

AgNO3(aq) + NaCl(aq) ⇄ AgCl(s) + NaNO3(aq)

21. Write the correct KP expression for this reaction.

CaCO3(s) ⇄ CaO(s) + CO2(g)

22. Write the correct KP expression for this reaction.

C2H2(g) + 2 I2(s) ⇄ C2H2I4(g)

Answers

1.

the relationship between the concentrations of reactants and products of a chemical reaction at equilibrium

3.

a)

b)

5.

a)

b)

7.

0.163 M

9.

0.272 M

11.

13.

0.639 atm

15.

7.20 × 10−5

17.

Keq = 3.98 × 10−1

19.

21.

KP = PCO2

Chapter 101

14.3 Shifting Equilibria: Le Chatelier’s Principle

Learning Objectives

Define Le Chatelier’s principle.

Predict the direction of shift for an equilibrium under stress.

Once equilibrium is established, the reaction is over, right? Not exactly. An experimenter has some ability to affect the equilibrium.

Chemical equilibria can be shifted by changing the conditions that the system experiences. We say that we “stress” the equilibrium. When we stress the equilibrium, the chemical reaction is no longer at equilibrium, and the reaction starts to move back toward equilibrium in such a way as to decrease the stress. The formal statement is called Le Chatelier’s principle: If an equilibrium is stressed, then the reaction shifts to reduce the stress.

There are several ways to stress an equilibrium. One way is to add or remove a product or a reactant in a chemical reaction at equilibrium. When additional reactant is added, the equilibrium shifts to reduce this stress: it makes more product. When additional product is added, the equilibrium shifts to reactants to reduce the stress. If reactant or product is removed, the equilibrium shifts to make more reactant or product, respectively, to make up for the loss.

Example 6 Given this reaction at equilibrium: N2 + 3 H2 ⇄ 2 NH3 In which direction—toward reactants or toward products—does the reaction shift if the equilibrium is stressed by each change? H2 is added. NH3 is added. NH3 is removed. Solution If H2 is added, there is now more reactant, so the reaction will shift toward products to reduce the added H2. If NH3 is added, there is now more product, so the reaction will shift toward reactants to reduce the added NH3. If NH3 is removed, there is now less product, so the reaction will shift toward products to replace the product removed. Test Yourself Given this reaction at equilibrium: CO(g) + Br2(g) ⇄ COBr2(g) In which direction—toward reactants or toward products—does the reaction shift if the equilibrium is stressed by each change? Br2 is removed. COBr2 is added. Answers toward reactants toward reactants

It is worth noting that when reactants or products are added or removed, the value of the Keq does not change. The chemical reaction simply shifts, in a predictable fashion, to reestablish concentrations so that the Keq expression reverts to the correct value.

How does an equilibrium react to a change in pressure? Pressure changes do not markedly affect the solid or liquid phases. However, pressure strongly impacts the gas phase. Le Chatelier’s principle implies that a pressure increase shifts an equilibrium to the side of the reaction with the fewer number of moles of gas, while a pressure decrease shifts an equilibrium to the side of the reaction with the greater number of moles of gas. If the number of moles of gas is the same on both sides of the reaction, pressure has no effect.

Example 7 What is the effect on this equilibrium if pressure is increased? N2(g) + 3 H2(g) ⇄ 2 NH3(g) Solution According to Le Chatelier’s principle, if pressure is increased, then the equilibrium shifts to the side with the fewer number of moles of gas. This particular reaction shows a total of 4 mol of gas as reactants and 2 mol of gas as products, so the reaction shifts toward the products side. Test Yourself What is the effect on this equilibrium if pressure is decreased? 3 O2(g) ⇄ 2 O3(g) Answer Reaction shifts toward reactants.

What is the effect of temperature changes on an equilibrium? It depends on whether the reaction is endothermic or exothermic. Recall that endothermic means that energy is absorbed by a chemical reaction, while exothermic means that energy is given off by the reaction. As such, energy can be thought of as a reactant or a product, respectively, of a reaction:

endothermic: energy + reactants → products
exothermic: reactants → products + energy

Because temperature is a measure of the energy of the system, increasing temperature can be thought of as adding energy. The reaction will react as if a reactant or a product is being added and will act accordingly by shifting to the other side. For example, if the temperature is increased for an endothermic reaction, essentially a reactant is being added, so the equilibrium shifts toward products. Decreasing the temperature is equivalent to decreasing a reactant (for endothermic reactions) or a product (for exothermic reactions), and the equilibrium shifts accordingly.

Example 8 Predict the effect of increasing the temperature on this equilibrium. PCl3 + Cl2 ⇄ PCl5 + 60 kJ Solution Because energy is listed as a product, it is being produced, so the reaction is exothermic. If the temperature is increasing, a product is being added to the equilibrium, so the equilibrium shifts to minimize the addition of extra product: it shifts back toward reactants. Test Yourself Predict the effect of decreasing the temperature on this equilibrium. N2O4 + 57 kJ ⇄ 2 NO2 Answer Equilibrium shifts toward reactants.

In the case of temperature, the value of the equilibrium has changed because the Keq is dependent on temperature. That is why equilibria shift with changes in temperature.

A catalyst is a substance that increases the speed of a reaction. Overall, a catalyst is not a reactant and is not used up, but it still affects how fast a reaction proceeds. However, a catalyst does not affect the extent or position of a reaction at equilibrium. It helps a reaction achieve equilibrium faster.

Chemistry Is Everywhere: Equilibria in the Garden

Hydrangeas are common flowering plants around the world. Although many hydrangeas are white, there is one common species (Hydrangea macrophylla) whose flowers can be either red or blue, as shown in the accompanying figure. How is it that a plant can have different colored flowers like this?

Figure 14.1 Garden Equilibria. This species of hydrangea has flowers that can be either red or blue. Why the color difference?

Source: “Hydrangea” by Janne Moren is Licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 2.0 Generic.

Interestingly, the color of the flowers is due to the acidity of the soil that the hydrangea is planted in. An astute gardener can adjust the pH of the soil and actually change the color of the flowers. However, it is not the H+ or OH− ions that affect the color of the flowers. Rather, it is the presence of aluminum that causes the color change.

The solubility of aluminum in soil—and thus the ability of plants to absorb it—is dependent on the acidity of the soil. If the soil is relatively acidic, the aluminum is more soluble, and plants can absorb it more easily. Under these conditions, hydrangea flowers are blue as Al ions interact with anthocyanin pigments in the plant. In more basic soils, aluminum is less soluble, and under these conditions the hydrangea flowers are red. Gardeners who change the pH of their soils to change the color of their hydrangea flowers are therefore employing Le Chatelier’s principle: the amount of acid in the soil changes the equilibrium of aluminum solubility, which in turn affects the color of the flowers.

Key Takeaways

Le Chatelier’s principle addresses how an equilibrium shifts when the conditions of an equilibrium are changed.

The direction of shift can be predicted for changes in concentrations, temperature, or pressure.

Catalysts do not affect the position of an equilibrium; they help reactions achieve equilibrium faster.

Exercises

Define Le Chatelier’s principle.

What is meant by a stress? What are some of the ways an equilibrium can be stressed?

Given this equilibrium, predict the direction of shift for each stress.

H2(g) + I2(s) + 53 kJ ⇄ 2 HI(g)

a) decreased temperature

b) increased pressure

c) removal of HI

4. Given this equilibrium, predict the direction of shift for each stress.

H2(g) + F2(g) ⇄ 2 HF(g) + 546 kJ

a) increased temperature

b) addition of H2

c) decreased pressure

5. Given this equilibrium, predict the direction of shift for each stress.

2 SO2(g) + O2(g) ⇄ 2 SO3(g) + 196 kJ

a) removal of SO3

b) addition of O2

c) decreased temperature

6. Given this equilibrium, predict the direction of shift for each stress listed.

CO2(g) + C(s) + 171 kJ ⇄ 2 CO(g)

a) addition of CO

b) increased pressure

c) addition of a catalyst

7. The synthesis of NH3 uses this chemical reaction.

N2(g) + 3 H2(g) ⇄ 2 NH3(g) + 92 kJ

Identify three stresses that can be imposed on the equilibrium to maximize the amount of NH3.

8. The synthesis of CaCO3 uses this chemical reaction.

CaO(s) + CO2(g) ⇄ CaCO3(s) + 180 kJ

Identify three stresses that can be imposed on the equilibrium to maximize the amount of CaCO3.

Answers

1.

When an equilibrium is stressed, the equilibrium shifts to minimize that stress.

3.

toward reactants

toward reactants

toward products

5.

toward products

toward products

toward products

7.

increased pressure, decreased temperature, removal of NH3

Chapter 102

14.4 Calculating Equilibrium Constant Values

Learning Objectives

Calculate equilibrium concentrations from the values of the initial amounts and the Keq.

There are some circumstances in which, given some initial amounts and the Keq, you will have to determine the concentrations of all species when equilibrium is achieved. Such calculations are not difficult to do, especially if a consistent approach is applied. We will consider such an approach here.

Suppose we have this simple equilibrium. Its associated Keq is 4.0, and the initial concentration of each reactant is 1.0 M:

Because we have concentrations for the reactants but not the products, we presume that the reaction will proceed in the forward direction to make products. But by how much will it proceed? We don’t know, so let us assign it a variable. Let us assume that x M H2 reacts as the reaction goes to equilibrium. This means that at equilibrium, we have (1.0 − x) M H2 left over.

According to the balanced chemical equation, H2 and Cl2 react in a 1:1 ratio. How do we know that? The coefficients of these two species in the balanced chemical equation are 1 (unwritten, of course). This means that if x M H2 reacts, x M Cl2 reacts as well. If we start with 1.0 M Cl2 at the beginning and we react x M, we have (1.0 − x) M Cl2 left at equilibrium.

How much HCl is made? We start with zero, but we also see that 2 mol of HCl are made for every mole of H2 (or Cl2) that reacts (from the coefficients in the balanced chemical equation), so if we lose x M H2, we gain 2x M HCl. So now we know the equilibrium concentrations of our species:

We can substitute these concentrations into the Keq expression for this reaction and combine it with the known value of Keq:

This is an equation in one variable, so we should be able to solve for the unknown value. This expression may look formidable, but first we can simplify the denominator and write it as a perfect square as well:

The fraction is a perfect square, as is the 4.0 on the right. So we can take the square root of both sides:

Now we rearrange and solve (be sure you can follow each step):

Now we have to remind ourselves what x is—the amount of H2 and Cl2 that reacted—and 2x is the equilibrium [HCl]. To determine the equilibrium concentrations, we need to go back and evaluate the expressions 1 − x and 2x to get the equilibrium concentrations of our species:

1.0 − x = 1.0 − 0.50 = 0.50 M = [H2] = [Cl2]
2x = 2(0.50) = 1.0 M = [HCl]

The units are assumed to be molarity. To check, we simply substitute these concentrations and verify that we get the numerical value of the Keq, in this case 4.0:

We formalize this process by introducing the ICE chart, where ICE stands for initial, change, and equilibrium. The initial values go in the first row of the chart. The change values, usually algebraic expressions because we do not yet know their exact numerical values, go in the next row. However, the change values must be in the proper stoichiometric ratio as indicated by the balanced chemical equation. Finally, the equilibrium expressions in the last row are a combination of the initial value and the change value for each species. The expressions in the equilibrium row are substituted into the Keq expression, which yields an algebraic equation that we try to solve.

The ICE chart for the above example would look like this:

H 2 (g)	+	Cl 2 (g)	⇄	2HCl(g)	Keq = 4.0
I	1.0	1.0	0
C	− x	− x	+2 x
E	1.0 − x	1.0 − x	+2 x

Substituting the last row into the expression for the Keq yields

which, of course, is the same expression we have already solved and yields the same answers for the equilibrium concentrations. The ICE chart is a more formalized way to do these types of problems. The + sign is included explicitly in the change row of the ICE chart to avoid any confusion.

Sometimes when an ICE chart is set up and the Keq expression is constructed, a more complex algebraic equation will result. One of the more common equations has an x2 term in it and is called a quadratic equation. There will be two values possible for the unknown x, and for a quadratic equation with the general formula ax2 + bx + c = 0 (where a, b, and c are the coefficients of the quadratic equation), the two possible values are as follows:

One value of x is the + sign used in the numerator, and the other value of x is the − sign used in the numerator. In this case, one value of x typically makes no sense as an answer and can be discarded as physically impossible, leaving only one possible value and the resulting set of concentrations. Example 9 illustrates this.

Example 9 Set up an ICE chart and solve for the equilibrium concentrations in this chemical reaction. Solution The ICE chart is set up like this. First, the initial values:	COI 2 (g)	⇄	CO(g)	+	I 2 (g)
I	0.55	0	0
C
E
Some of the COI2 will be lost, but how much? We don’t know, so we represent it by the variable x. So x M COI2 will be lost, and for each COI2 that is lost, x M CO and x M I2 will be produced. These expressions go into the change row:	COI 2 (g)	⇄	CO(g)	+	I 2 (g)
I	0.55	0	0
C	− x	+ x	+ x
E
At equilibrium, the resulting concentrations will be a combination of the initial amount and the changes:	COI 2 (g)	⇄	CO(g)	+	I 2 (g)
I	0.55	0	0
C	− x	+ x	+ x
E	0.55 − x	+ x	+ x
The expressions in the equilibrium row go into the Keq expression: We rearrange this into a quadratic equation that equals 0: 0.000484 − 0.00088x = x2
x2 + 0.00088x − 0.000484 = 0 Now we use the quadratic equation to solve for the two possible values of x: Evaluate for both signs in the numerator—first the + sign and then the − sign: x = 0.0216 or x = −0.0224 Because x is the final concentration of both CO and I2, it cannot be negative, so we discount the second numerical answer as impossible. Thus x = 0.0216. Going back to determine the final concentrations using the expressions in the E row of our ICE chart, we have [COI2] = 0.55 − x = 0.55 − 0.0216 = 0.53 M
[CO] = x = 0.0216 M
[I2] = x = 0.0216 M You can verify that these numbers are correct by substituting them into the Keq expression and evaluating and comparing to the known Keq value. Test Yourself Set up an ICE chart and solve for the equilibrium concentrations in this chemical reaction. Answer The completed ICE chart is as follows:	N 2 H 2 (g)	⇄	N 2 (g)	+	H 2 (g)
I	0.075	0	0
C	− x	+ x	+ x
E	0.075 − x	+ x	+ x
Solving for x gives the equilibrium concentrations as [N2H2] = 0.033 M; [N2] = 0.042 M; and [H2] = 0.042 M

Key Takeaways

An ICE chart is a convenient way to determine equilibrium concentrations from starting amounts.

Exercises

Describe the three parts of an ICE chart.

What is the relationship between the equilibrium row in an ICE chart and the other two rows?

Set up (but do not solve) an ICE chart for this reaction, given the initial conditions.

Set up (but do not solve) an ICE chart for this reaction, given the initial conditions.

Given that pure solids and liquids do not appear in Keq expressions, set up the ICE chart for this reaction, given the initial conditions.

Given that pure solids and liquids do not appear in Keq expressions, set up the ICE chart for this reaction, given the initial conditions.

Determine the equilibrium concentrations for this chemical reaction with the given Keq.

Determine the equilibrium concentrations for this chemical reaction with the given Keq.

Determine the equilibrium concentrations for this chemical reaction with the given Keq.

Determine the equilibrium concentrations for this chemical reaction with the given Keq.

Determine the equilibrium concentrations for this chemical reaction with the given Keq.

Determine the equilibrium concentrations for this chemical reaction with the given Keq.

Answers

1.

I = initial concentrations; C = change in concentrations; E = equilibrium concentrations

3.

3O 2	⇄	2O 3
I	0.075	0
C	−3 x	+2 x
E	0.075 − 3 x	+2 x

5.

CH 4	+	2O 2	⇄	CO 2	+	2H 2 O
I	0.0060	0.055	0	0
C	− x	−2 x	+ x	—
E	0.0060 − x	0.055 − 2 x	+ x	—

7.

[HCN] = 0.364 M; [HNC] = 1.64 M

9.

[N2O3] = 0.0017 M; [NO] = [NO2] = 0.0646 M

11.

[H2S] = 0.836 M; [H2] = 0.046 M

Chapter 103

14.5 Some Special Types of Equilibria

Learning Objectives

Identify several special chemical equilibria.

Construct Ka, Kb and Ksp expressions and use these in calculations.

In one sense, all chemical equilibria are treated the same. However, there are several classes of reactions that are noteworthy because of either the identities of the reactants and products or the form of the Keq expression.

Weak Acids and Bases

In Chapter 13 “Acids and Bases”, we noted how some acids and bases are strong and some are weak. If an acid or base is strong, it is ionized 100% in H2O. HCl(aq) is an example of a strong acid:

HCl(aq) → H+(aq) + Cl−(aq) (100%)

However, if an acid or base is weak, it may dissolve in H2O but does not ionize completely. This means that there is an equilibrium between the unionized acid or base and the ionized form. HC2H3O2 is an example of a weak acid:

HC2H3O2 (aq) ⇄ H+(aq) + C2H3O2 –(aq)

HC2H3O2 is soluble in H2O (in fact, it is the acid in vinegar), so the reactant concentration will appear in the equilibrium constant expression. But not all the molecules separate into ions. This is the case for all weak acids and bases.

An acid dissociation constant, Ka, is the equilibrium constant for the dissociation of a weak acid into ions. Note the a subscript on the K; it implies that the substance is acting as an acid. The larger Ka is, the stronger the acid is. Table 14.1 “Acid Dissociation Constants for Some Weak Acids” lists several acid dissociation constants. Keep in mind that they are just equilibrium constants.

Table 14.1 Acid Dissociation Constants for Some Weak Acids

Acid	Ka
HC 2 H 3 O 2	1.8 × 10 −5
HClO 2	1.1 × 10 −2
H 2 PO 4−	6.2 × 10 −8
HCN	6.2 × 10 −10
HF	6.3 × 10 −4
HNO 2	5.6 × 10 −4
H 3 PO 4	7.5 × 10 −3

Note also that the acid dissociation constant refers to one H+ ion coming off the initial reactant. Thus the acid dissociation constant for H3PO4 refers to this equilibrium:

H3PO4(aq) ⇄ H+(aq) + H2PO4–(aq) Ka = 7.5×10-3

The H2PO4− ion, called the dihydrogen phosphate ion, is also a weak acid with its own acid dissociation constant:

H2PO4–(aq) ⇄ H+(aq) + HPO42-(aq) Ka = 6.2×10-8

Thus for so-called polyprotic acids, each H+ ion comes off in sequence, and each H+ ion that ionizes does so with its own characteristic Ka.

Example 10 Write the equilibrium equation and the Ka expression for HSO4− acting as a weak acid. Solution HSO4– acts as a weak acid by separating into an H+ ion and an SO42− ion: HSO4–(aq) ⇄ H+(aq) + SO42-(aq) The Ka is written just like any other equilibrium constant, in terms of the concentrations of products divided by concentrations of reactants: Ka = ([H+][SO42-])/[HSO4–] Test Yourself Write the equilibrium equation and the Ka expression for HPO42− acting as a weak acid. Answer HPO42-(aq) ⇄ H+(aq) + PO43-(aq) Ka = ([H+][PO43-])/[HPO42-]

The Ka is used in equilibrium constant problems just like other equilibrium constants are. However, in some cases, we can simplify the mathematics if the numerical value of the Ka is small, much smaller than the concentration of the acid itself. Example 11 illustrates this.

Example 11 What is the pH of a 1.00 M solution of HC2H3O2? The Ka of HC2H3O2 is 1.8 × 10−5. Solution This is a two-part problem. We need to determine [H+] and then use the definition of pH to determine the pH of the solution. For the first part, we can use an ICE chart:	HC 2 H 3 O 2 (aq)	⇄	H + (g)	+	C 2 H 3 O 2− (g)
I	1.00	0	0
C	− x	+ x	+ x
E	1.00 − x	+ x	+ x
We now construct the Ka expression, substituting the concentrations from the equilibrium row in the ICE chart: Ka = ([H+][C2H3O2–])/[HC2H3O2] = ((x)(x))/(1.00−x) = 1.8×10−5 Here is where a useful approximation comes in: at 1.8 × 10−5, HC2H3O2 will not ionize very much, so we expect that the value of x will be small. It should be so small that in the denominator of the fraction, the term (1.00 − x) will likely be very close to 1.00. As such, we would introduce very little error if we simply neglect the x in that term, making it equal to 1.00: (1.00 − x) ≈ 1.00 for small values of x This simplifies the mathematical expression we need to solve: ((x)(x))/1.00 = 1.8×10−5 This is much easier to solve than a more complete quadratic equation. The new equation to solve becomes x2 = 1.8 × 10−5 Taking the square root of both sides, x = 4.2 × 10−3 Because x is the equilibrium concentrations of H+ and C2H3O2−, we thus have [H+] = 4.2 × 10−3 M Notice that we are justified by neglecting the x in the denominator; it truly is small compared to 1.00. Now we can determine the pH of the solution: pH = −log[H+] = −log(4.2 × 10−3) = 2.38 Test Yourself What is the pH of a 0.500 M solution of HCN? The Ka of HCN is 6.2 × 10−10. Answer 4.75

Weak bases also have dissociation constants, labelled Kb (the b subscript stands for base). However, values of Kb are rarely tabulated because there is a simple relationship between the Kb of a base and the Ka of its conjugate acid:

Ka × Kb = 1.0 × 10−14

Thus it is simple to calculate the Kb of a base from the Ka of its conjugate acid.

Example 12 What is the value of Kb for C2H3O2−, which can accept a proton and act as a base? Solution To determine the Kb for C2H3O2−, we need to know the Ka of its conjugate acid. The conjugate acid of C2H3O2− is HC2H3O2. The Ka for HC2H3O2 is in Table 14.1 “Acid Dissociation Constants for Some Weak Acids” and is 1.8 × 10−5. Using the mathematical relationship between Ka and Kb: (1.8 × 10−5)Kb = 1.0 × 10−14 Solving, Kb =1.0×10−14 / 1.8×10−5 = 5.6×10−10 Test Yourself What is the value of Kb for PO43−, which can accept a proton and act as a base? The Ka for HPO42− is 2.2 × 10−13. Answer 4.5 × 10−2

Autoionization of Water

In Chapter 13 “Acids and Bases”, we introduced the autoionization of water—the idea that water can act as a proton donor and proton acceptor simultaneously. Because water is not a strong acid (Table 13.2 “Strong Acids and Bases”), it must be a weak acid, which means that its behaviour as an acid must be described as an equilibrium. That equilibrium is as follows:

H2O(ℓ) + H2O(ℓ) ⇄ H3O+(aq) + OH–(aq)

The equilibrium constant includes [H3O+] and [OH−] but not [H2O(ℓ)] because it is a pure liquid. Hence the expression does not have any terms in its denominator:

K = [H3O+][OH−] ≡ Kw = 1.0 × 10−14

This is the same Kw that was introduced in Chapter 13 “Acids and Bases” and the same 1.0 × 10−14 that appears in the relationship between the Ka and the Kb of a conjugate acid-base pair. In fact, we can rewrite this relationship as follows:

Ka × Kb = Kw

Insoluble Compounds

In Chapter 5 “Chemical Reactions and Equations”, Section 5.2 “Types of Chemical Reactions: Single- and Double-Displacement Reactions”, on chemical reactions, the concept of soluble and insoluble compounds was introduced. Solubility rules were presented that allow a person to predict whether certain simple ionic compounds will or will not dissolve.

Describing a substance as soluble or insoluble is a bit misleading because virtually all substances are soluble; they are just soluble to different extents. In particular for ionic compounds, what we typically describe as an insoluble compound can actually be ever so slightly soluble; an equilibrium is quickly established between the solid compound and the ions that do form in solution. Thus the hypothetical compound MX does in fact dissolve but only very slightly. That means we can write an equilibrium for it:

MX(s) ⇄ M+(aq) + X–(aq)

The equilibrium constant for a compound normally considered insoluble is called a solubility product constantThe equilibrium constant for a compound normally considered insoluble. and is labelled Ksp (with the subscript sp, meaning “solubility product”). Because the reactant is a solid, its concentration does not appear in the Ksp expression, so like Kw, expressions for Ksp do not have denominators. For example, the chemical equation and the expression for the Ksp for AgCl, normally considered insoluble, are as follows:

AgCl(s) ⇄ Ag+(aq) + Cl–(aq) Ksp = [Ag+][Cl–]

Table 14.2 “Solubility Product Constants for Slightly Soluble Ionic Compounds” lists some values of the Ksp for slightly soluble ionic compounds.

Table 14.2 Solubility Product Constants for Slightly Soluble Ionic Compounds

Compound	Ksp
BaSO 4	1.1 × 10 −10
Ca(OH) 2	5.0 × 10 −6
Ca 3 (PO 4 ) 2	2.1 × 10 −33
Mg(OH) 2	5.6 × 10 −12
HgI 2	2.9 × 10 −29
AgCl	1.8 × 10 −10
AgI	8.5 × 10 −17
Ag 2 SO 4	1.5 × 10 −5

Example 13 Write the Ksp expression for Ca3(PO4)2. Solution Recall that when an ionic compound dissolves, it separates into its individual ions. For Ca3(PO4)2, the ionization reaction is as follows: Ca3(PO4)2(s) ⇄ 3 Ca2+(aq) + 2 PO43–(aq) Hence the Ksp expression is Ksp = [Ca2+]3[PO43−]2 Test Yourself Write the Ksp expression Ag2SO4. Answer Ksp = [Ag+]2[SO42−]

Equilibrium problems involving the Ksp can also be done, and they are usually more straightforward than other equilibrium problems because there is no denominator in the Ksp expression. Care must be taken, however, in completing the ICE chart and evaluating exponential expressions.

Example 14 What are [Ag+] and [Cl−] in a saturated solution of AgCl? The Ksp of AgCl is 1.8 × 10−10. Solution The chemical equation for the dissolving of AgCl is AgCl(s) ⇄ Ag+(aq) + Cl–(aq) The Ksp expression is as follows: Ksp = [Ag+][Cl−] So the ICE chart for the equilibrium is as follows:	AgCl(s)	⇄	Ag + (aq)	+	Cl − (aq)
I	0	0
C	− x	+ x	+ x
E	+ x	+ x
Notice that we have little in the column under AgCl except the stoichiometry of the change; we do not need to know its initial or equilibrium concentrations because its concentration does not appear in the Ksp expression. Substituting the equilibrium values into the expression: (x)(x) = 1.8 × 10−10 Solving, x2 = 1.8 × 10−10
x = 1.3 × 10−5 Thus [Ag+] and [Cl−] are both 1.3 × 10−5 M. Test Yourself What are [Ba2+] and [SO42−] in a saturated solution of BaSO4? The Ksp of BaSO4 is 1.1 × 10−10. Answer 1.0 × 10−5 M

Example 15 What are [Ca2+] and [PO43−] in a saturated solution of Ca3(PO4)2? The Ksp of Ca3(PO4)2 is 2.1 × 10−33. Solution This is similar to Example 14, but the ICE chart is much different because of the number of ions formed.	Ca 3 (PO 4 ) 2 (s)	⇄	3Ca 2+ (aq)	+	2PO 43− (aq)
I	0	0
C	− x	+3 x	+2 x
E	+3 x	+2 x
For every unit of Ca3(PO4)2 that dissolves, three Ca2+ ions and two PO43− ions are formed. The expression for the Ksp is also different: Ksp = [Ca2+]3[PO43−]2 = 2.1 × 10−33 Now when we substitute the unknown concentrations into the expression, we get (3x)3(2x)2 = 2.1 × 10−33 When we raise each expression inside parentheses to the proper power, remember that the power affects everything inside the parentheses, including the number. So (27x3)(4x2) = 2.1 × 10−33 Simplifying, 108x5 = 2.1 × 10−33 Dividing both sides of the equation by 108, we get x5 = 1.9 × 10−35 Now we take the fifth root of both sides of the equation (be sure you know how to do this on your calculator): x = 1.1 × 10−7 We are not done yet. We still need to determine the concentrations of the ions. According to the ICE chart, [Ca2+] is 3x, not x. So [Ca2+] = 3x = 3 × 1.1 × 10−7 = 3.3 × 10−7 M [PO43−] is 2x, so [PO43−] = 2x = 2 × 1.1 × 10−7 = 2.2 × 10−7 M Test Yourself What are [Mg2+] and [OH−] in a saturated solution of Mg(OH)2? The Ksp of Mg(OH)2 is 5.6 × 10−12. Answer [Mg2+] = 1.1 × 10−4 M; [OH−] = 2.2 × 10−4 M

Food and Drink App: Solids in Your Wine Bottle

People who drink wine from bottles (as opposed to boxes) will occasionally notice some insoluble materials in the wine, either crusting the bottle, stuck to the cork, or suspended in the liquid wine itself. The accompanying figure shows a cork encrusted with colored crystals. What are these crystals?

One of the acids in wine is tartaric acid (H2C4H4O6). Like the other acids in wine (citric and malic acids, among others), tartaric acid imparts a slight tartness to the wine. Tartaric acid is rather soluble in H2O, dissolving over 130 g of the acid in only 100 g of H2O. However, the potassium salt of singly ionized tartaric acid, potassium hydrogen tartrate (KHC4H4O6; also known as potassium bitartrate and better known in the kitchen as cream of tartar), has a solubility of only 6 g per 100 g of H2O. Thus, over time, wine stored at cool temperatures will slowly precipitate potassium hydrogen tartrate. The crystals precipitate in the wine or grow on the insides of the wine bottle and, if the bottle is stored on its side, on the bottom of the cork. The color of the crystals comes from pigments in the wine; pure potassium hydrogen tartrate is clear in its crystalline form, but in powder form it is white.

The crystals are harmless to ingest; indeed, cream of tartar is used as an ingredient in cooking. However, most wine drinkers don’t like to chew their wine, so if tartrate crystals are present in a wine, the wine is usually filtered or decanted to remove the crystals. Tartrate crystals are almost exclusively in red wines; white and rose wines do not have as much tartaric acid in them.

Key Takeaways

Equilibrium constants exist for certain groups of equilibria, such as weak acids, weak bases, the autoionization of water, and slightly soluble salts.

Exercises

Explain the difference between the Keq and the Ksp.

Explain the difference between the Ka and the Kb.

Write the balanced chemical equation that represents the equilibrium between HF(aq) as reactants and H+(aq) and F−(aq) as products.

Write the balanced chemical equation that represents the equilibrium between CaF2(s) as reactants and Ca2+(aq) and F−(aq) as products.

Assuming that all species are dissolved in solution, write the Keq expression for the chemical equation in Exercise 3.

Noting the phase labels, write the Ksp expression for the chemical equation in Exercise 4.

Determine the concentrations of all species in the ionization of 0.100 M HClO2 in H2O. The Ka for HClO2 is 1.1 × 10−2.

Determine the concentrations of all species in the ionization of 0.0800 M HCN in H2O. The Ka for HCN is 6.2 × 10−10.

Determine the pH of a 1.00 M solution of HNO2. The Ka for HNO2 is 5.6 × 10−4.

Determine the pH of a 3.35 M solution of HC2H3O2. The Ka for HC2H3O2 is 1.8 × 10−5.

Write the chemical equations and Ka expressions for the stepwise dissociation of H3PO4.

Write the chemical equations and Ka expressions for the stepwise dissociation of H3C6H5O7.

If the Ka for HNO2 is 5.6 × 10−4, what is the Kb for NO2−(aq)?

If the Ka for HCN is 6.2 × 10−10, what is the Kb for CN−(aq)?

What is [OH−] in a solution whose [H+] is 3.23 × 10−6 M?

What is [OH−] in a solution whose [H+] is 9.44 × 10−11 M?

What is [H+] in a solution whose [OH−] is 2.09 × 10−2 M?

What is [H+] in a solution whose [OH−] is 4.07 × 10−7 M?

Write the balanced chemical equation and the Ksp expression for the slight solubility of Mg(OH)2(s).

Write the balanced chemical equation and the Ksp expression for the slight solubility of Fe2(SO4)3(s).

What are [Sr2+] and [SO42−] in a saturated solution of SrSO4(s)? The Ksp of SrSO4(s) is 3.8 × 10−4.

What are [Ba2+] and [F−] in a saturated solution of BaF2(s)? The Ksp of BaF2(s) is 1.8 × 10−7.

What are [Ca2+] and [OH−] in a saturated solution of Ca(OH)2(s)? The Ksp of Ca(OH)2(s) is 5.0 × 10−6.

What are [Pb2+] and [I−] in a saturated solution of PbI2? The Ksp for PbI2 is 9.8 × 10−9.

Answers

1.

The Ksp is a special type of the Keq and applies to compounds that are only slightly soluble.

3.

HF(aq) ⇄ H+(aq) + F–(aq)

5.

Keq = ([H+][F–])/[HF]

7.

[HClO2] = 0.0719 M; [H+] = [ClO2−] = 0.0281 M

9.

1.63

11.

H3PO4(aq) ⇄ H+(aq) + H2PO4–(aq); Ka = ([H+][H2PO4–])/[H3PO4]

H2PO4–(aq) ⇄ H+(aq) + HPO42–(aq); Ka = ([H+][HPO42–])/[H2PO4–]

HPO42–(aq) ⇄ H+(aq) + PO43–(aq); Ka = ([H+][PO43–])/[HPO42–]

13.

1.8 × 10−11

15.

3.10 × 10−9 M

17.

4.78 × 10−13 M

19.

Mg(OH)2(s) ⇄ Mg2+(aq) + 2 OH–(aq);Ksp = [Mg2+][OH−]2

21.

[Sr2+] = [SO42−] = 1.9 × 10−2 M

23.
[Ca2+] = 0.011 M; [OH−] = 0.022 M

Chapter 104

14.6 End-of-Chapter Material

Additional Exercises

What is the relationship between the Ksp expressions for a chemical reaction and its reverse chemical reaction?

What is the relationship between the Kw value for H2O and its reverse chemical reaction?

For the equilibrium

PCl3(g) + Cl2(g) ⇄ PCl5(g) + 60 kJ

list four stresses that serve to increase the amount of PCl5.

For the equilibrium

N2O4 + 57 kJ ⇄ 2 NO2

list four stresses that serve to increase the amount of NO2.

Does a very large Keq favor the reactants or the products? Explain your answer.

Is the Keq for reactions that favor reactants large or small? Explain your answer.

Show that Ka × Kb = Kw by determining the expressions for these two reactions and multiplying them together.

HX(aq) ⇄ H+(aq) + X–(aq)
X–(aq) + H2O(ℓ) ⇄ HX(aq) + OH–(aq)

Is the conjugate base of a strong acid weak or strong? Explain your answer.

What is the solubility in moles per liter of AgCl? Use data from Table 14.2 “Solubility Product Constants for Slightly Soluble Ionic Compounds”.

What is the solubility in moles per liter of Ca(OH)2? Use data from Table 14.2 “Solubility Product Constants for Slightly Soluble Ionic Compounds”.

Under what conditions is Keq = KP?

Under what conditions is Keq > KP when the temperature is 298 K?

What is the pH of a saturated solution of Mg(OH)2? Use data from Table 14.2 “Solubility Product Constants for Slightly Soluble Ionic Compounds”.

What are the pH and the pOH of a saturated solution of Fe(OH)3? The Ksp of Fe(OH)3 is 2.8 × 10−39.

For a salt that has the general formula MX, an ICE chart shows that the Ksp is equal to x2, where x is the concentration of the cation. What is the appropriate formula for the Ksp of a salt that has a general formula of MX2?

Referring to Exercise 15, what is the appropriate formula for the Ksp of a salt that has a general formula of M2X3 if the concentration of the cation is defined as 2x, rather than x?

Consider a saturated solution of PbBr2(s). If [Pb2+] is 1.33 × 10−5 M, find each of the following.

a) [Br−]

b) the Ksp of PbBr2(s)

18. Consider a saturated solution of Pb3(PO4)2(s). If [Pb2+] is 7.34 × 10−14 M, find each of the following.

a) [PO43−]

b) the Ksp of Pb3(PO4)2(s)

Answers

1.

They are reciprocals of each other.

3.

increase the pressure; decrease the temperature; add PCl3; add Cl2; remove PCl5

5.

favor products because the numerator of the ratio for the Keq is larger than the denominator

7.

Ka×Kb = ([H+][X–])/[HX] × (([HX][OH–])/[X–]) = [H+][OH–] = Kw

9.

1.3 × 10−5 mol/L

11.

Keq = KP when the number of moles of gas on both sides of the reaction is the same.

13.

10.35

15.

4x3

17.

a) 2.66 × 10−5 M

b) 9.41 × 10−15

Chapter 105

Chapter 15. Kinetics

Introduction to Kinetics

Speed plays an important role in many of the things we do in everyday life. If you sleep in and need to get to your chemistry lecture quickly, you may choose to drive instead of walk because driving is faster. You may use a favourite website for streaming video content online, because of its quick and reliable download speeds. Applying for a summer job, you may have had to include your typing speed on your resume to show your competency on computers. These examples emphasize that the speed of a process is an important consideration in our everyday lives.

Similarly, the speed of a chemical reaction is also a significant consideration and is called its reaction rate. Reaction rates vary dramatically, with some reactions occurring on a time scale of seconds, while other reactions take many thousands of years. Several factors can influence reaction rate, and the study of the interplay between these factors and the rate of a chemical reaction is called kinetics.

Chapter 106

15.1 Factors that Affect the Rate of Reactions

Learning Objectives

To gain an understanding of collision theory.

To gain an understanding of the four main factors that affect reaction rate.

Reaction kinetics is the study of the rate of chemical reactions, and reaction rates can vary greatly over a large range of time scales. Some reactions can proceed at explosively fast rates like the detonation of fireworks (Figure 15.1 “Fireworks at Night Over River”), while others can occur at a sluggish rate over many years like the rusting of barbed wire exposed to the elements (Figure 15.2 “Rusted Barbed Wire”).

The chemical reaction in fireworks happens at an explosive rate.2

Figure 15.2. Rusted Barbed Wire. The rusting of barbed wire occurs over many years. Credit: Barbed wire (after years of hard work) by Waugsberg/

Collision Theory

To understand the kinetics of chemical reactions, and the factors that affect kinetics, we should first examine what happens during a reaction on the molecular level. According to the collision theory of reactivity, reactions occur when reactant molecules “effectively collide.” For an “effective collision” to occur, the reactant molecules must be oriented in space correctly to facilitate the breaking and forming of bonds and the rearrangement of atoms that result in the formation of product molecules (Figure 15.3 “Collision Visualizations“).

This visualization shows an ineffective and effective collision based on molecular orientation.

During a molecular collision, molecules must also possess a minimum amount of kinetic energy for an effective collision to occur. This energy varies for each reaction, and is known as the activation energy (Ea) (Figure 15.4 “Potential Energy and Activation Energy“). The rate of reaction therefore depends on the activation energy; a higher activation energy means that fewer molecules will have sufficient energy to undergo an effective collision.

. This potential energy diagram shows the activation energy of a hypothetical reaction.

Factors That Affect Rate

There are four main factors that can affect the reaction rate of a chemical reaction:

1. Reactant concentration. Increasing the concentration of one or more reactants will often increase the rate of reaction. This occurs because a higher concentration of a reactant will lead to more collisions of that reactant in a specific time period.

2. Physical state of the reactants and surface area. If reactant molecules exist in different phases, as in a heterogeneous mixture, the rate of reaction will be limited by the surface area of the phases that are in contact. For example, if a solid metal reactant and gas reactant are mixed, only the molecules present on the surface of the metal are able to collide with the gas molecules. Therefore, increasing the surface area of the metal by pounding it flat or cutting it into many pieces will increase its reaction rate.

3. Temperature. An increase in temperature typically increases the rate of reaction. An increase in temperature will raise the average kinetic energy of the reactant molecules. Therefore, a greater proportion of molecules will have the minimum energy necessary for an effective collision (Figure. 15.5 “Temperature and Reaction Rate”).

4. Presence of a catalyst. A catalyst is a substance that accelerates a reaction by participating in it without being consumed. Catalysts provide an alternate reaction pathway to obtain products. They are critical to many biochemical reactions. They will be examined further in the section “Catalysis.”

Key Takeaways

Reactions occur when two reactant molecules effectively collide, each having minimum energy and correct orientation.

Reactant concentration, the physical state of the reactants, and surface area, temperature, and the presence of a catalyst are the four main factors that affect reaction rate.

Chapter 107

15.2 Reaction Rates

Learning Objectives

To gain an understanding of relative reaction rates.

To gain an understanding of instantaneous reaction rates and initial reaction rates.

We encounter rates or speeds often in daily life; for example, the rate at which this textbook was typed could be measured in words per minute. This rate is a measure of the change in words typed in the time period of a minute. Similarly, the rate of a chemical reaction is also a measure of change that occurs in a given time period:

Rate of reaction = (Change in Concentration)/(Change in Time)

For a chemical reaction, we can measure the change in concentration in terms of either the disappearance of starting material or the appearance of the product. For the hypothetical reaction: A + B → C, we can express the average rate of reaction as follows:

Rate of reaction = – ∆[A] / ∆t = – ∆[B] / ∆t = ∆[C] / ∆t

Notice that a negative sign is included when expressing reaction rates with respect to the disappearance of starting materials. Reaction rates are always positive, so the decrease in concentration must be corrected for.

When the stoichiometric relationships in the balanced equation are not 1:1, the coefficient for each species must also be corrected for. In the hypothetical reaction 2 A + B → 3 C, two molecules of A are consumed for every one molecule of B, this means A is consumed twice as fast. To correct for this and express the average rate of reaction for each species, we must divide each by its coefficient in the balanced equation:

Rate of reaction = – ½∆[A] / ∆t = – ∆[B] / ∆t = (1/3) ∆[C] / ∆t

Example 1 The decomposition of dinitrogen pentoxide 2 N2O5(g) → 4 NO2(g) + O2(g) was performed in the lab and the rate of formation of NO2 was found to be 0.53 M/s. 1. What was the rate of formation of O2(g)? 2. What was the rate of consumption N2O5(g)? Solution a. First determine the rate relationship between NO2(g) and O2(g) using the coefficients of the balanced equation: Rate of reaction = ¼ ∆[NO2]/∆t = ∆[O2]/∆t Next substitute in the given values and solve for the rate of formation of O2(g): Rate of formation of O2(g) = (1/4) (0.53 M/s) = 0.13 M/s b. First determine the rate relationship between NO2(g) and N2O5(g) using the coefficients of the balanced equation: Rate of reaction = ¼ ∆[NO2]/∆t = ½ ∆[N2O5]/∆t Next substitute the given values and solve for the rate of consumption of N2O5(g): -½ rate of consumption of N2O5(g) = -¼ rate of formation NO2(g) Rate of consumption of N2O5(g) = ½ (0.53 M/s) = 0.27 M/s

Instantaneous Rate

For most chemical reactions, the rate of the reaction tends to decrease as time passes (Figure 15.6 “Reactant Concentration vs. Time“). As the reaction proceeds, more and more of the reactant molecules are consumed to become product, which lowers the concentration of reactant molecules. The reduction in reactant concentration results in fewer effective collisions.

The decrease in reaction rate over time means that average reaction rates do not accurately represent the actual rate of reaction at all time points. Instantaneous reaction rates, the rate of reaction at one instant in time, can be determined from the slope of the tangent at that point in the plot of concentration vs. time. The instantaneous rate at the start of the reaction, t = 0, is of particular interest in kinetics and is known as the initial rate of the reaction.

A plot of reactant concentration vs. time for a hypothetical reaction.

Example 2 Use Figure 15.6 to determine the instantaneous rate at 3 h. Solution The slope of the tangent at 3 h can be determined by drawing a triangle such as the one shown in Figure 15.6, and comparing the ratio of the height of the rise to the run of the length. Slope = rise / run = – ∆[Reactant] / ∆t = – (4.5-6.5 M)/(4-2 h) = – (-2 M)/(2 h) = 1 M/h

Key Takeaways

Reaction rates can be measured by the disappearance of starting material or the appearance of the product over time.

Instantaneous reaction rates can be determined from the slope of the tangent at that point in the plot of concentration vs. time.

The initial reaction rate is the instantaneous rate at the start of the reaction (at t = 0).

Chapter 108

15.3 Rate Laws

Learning Objectives

To gain an understanding of rate laws and determine rate laws from initial rates.

To gain an understanding of and the ability to determine reaction orders (including units).

The mathematical relationship of reaction rate with reactant concentrations is known as the rate law. This relationship may rely more heavily on the concentration of one particular reactant, and the resulting rate law may include some, all, or none of the reactant species involved in the reaction.

For the following hypothetical reaction

a A + b B → c C

the rate law can be expressed as:

Rate = k[A]y[B]z

The proportionality constant, k, is known as the rate constant and is specific for the reaction shown at a particular temperature. The rate constant changes with temperature, and its units depend on the sum of the concentration term exponents in the rate law. The exponents (y and z) must be experimentally determined and do not necessarily correspond to the coefficients in the balanced chemical equation.

Reaction Order

The sum of the concentration term exponents in a rate law equation is known as its reaction order. We can also refer to the relationship for each reactant in terms of its exponent as an order.

For the following reaction between nitrogen dioxide and carbon monoxide:

NO2(g) + CO(g) → NO(g) + CO2(g)

The rate law is experimentally determined to be: rate = k[NO2]2

Therefore, we would say that the overall reaction order for this reaction is second-order (the sum of all exponents in the rate law is 2), but zero-order for [CO] and second-order for [NO2].

The reaction order is most often a whole number such as 0, 1, or 2; however, there are instances where the reaction order may be a fraction or even a negative value.

Earlier it was mentioned that the units of the rate constant depend on the order of the reaction. Let’s quickly examine why this occurs. A simplified rate law can be expressed generically in the following way:

Rate = k[reactant]y

Units of rate = (units of rate constant)(units of concentration)y

Units of rate constant = (units of rate)/(units of concentration) = (M/s)/(My)

Therefore, the units of the rate constant should be:

Reaction Order	Units of rate constant
Zero-order	M s -1
First-order	s -1
Second-order	L mol -1 s -1

Determining Rate Laws from Initial Rates

The rate law can be determined experimentally using the method of initial rates, where the instantaneous reaction rate is measured immediately on mixing the reactants. The process is repeated over several runs or trials, varying the concentration one reactant at a time. These runs can then be compared to elucidate how changing the concentration of each reactant affects the initial rate.

Example 3 The initial rate of reaction for the reaction E + F → G was measured at three different initial concentrations of reactants as shown in the table. 1. Determine the rate law of the reaction. 2. Determine the rate constant.	Trial	Initial Rate (mole L -1 s -1 )	[E] (mole L -1 )	[F] (mole L -1 )
1	2.73 x 10 -5	0.100	0.100
2	5.47 x 10 -5	0.200	0.100
3	2.71 x 10 -5	0.100	0.200
Solution 1. Comparing trials 1 and 2, [E] is doubled, while [F] and the rate constant are held constant. This comparison will allow us to determine the order of reactant E: (initial rate 2)/(initial rate 1) = ([E]2/[E]1)y (5.47×10-5 Ms-1)/(2.73×10-5 Ms-1) = (0.200M/0.100M)y 2.00 = 2.00y y = 1 Therefore, the reaction is first order with respect to [E]. Comparing trials 1 and 3, [F] is doubled, while [E] and the rate constant are held constant. This comparison will allow us to determine the order of reactant F: (initial rate 3)/(initial rate 1) = ([F]3/[F]1)z (2.71×10-5 Ms-1)/(2.73×10-5 Ms-1) = (0.200M/0.100M)z 0.993 = 2.00z z = 0 Therefore, the reaction is zero order with respect to [F]. The rate law can now be written as: Rate = k[E]1 2. Using the rate law we have just determined, substitute in the initial concentration values and initial rate for any trial and solve for the rate constant: Rate = k[E]1 Using Trial 1: 2.73×10-5 Ms-1 = k(0.100M) k = (2.73×10-5 Ms-1)/(0.100M) k = 2.73 x 10-4s-1

Key Takeaways

The rate law is a mathematical relationship obtained by comparing reaction rates with reactant concentrations.

The reaction order is the sum of the concentration term exponents in a rate law equation.

A reaction’s rate law may be determined by the initial rates method.

Chapter 109

15.4 Concentration–Time Relationships: Integrated Rate Laws

Learning Objectives

To gain an understanding of graphical methods used to determine rate laws.

To gain an understanding of half-life with respect to first-order reactions.

An alternate way to determine a rate law is to monitor the concentration of reactants or products in a single trial over a period of time and compare that to what is expected mathematically for a first-, second-, or zero-order reaction.

First-Order Reactions

We have seen earlier that the rate law of a generic first-order reaction where A → B can be expressed in terms of the reactant concentration:

Rate of reaction = – (∆[A])/(∆t) = k∆[A]1

This form of the rate law is sometimes referred to as the differential rate law. We can perform a mathematical procedure known as an integration to transform the rate law to another useful form known as the integrated rate law:

ln ([A]t/[A]0)= -kt

where “ln” is the natural logarithm, [A]0 is the initial concentration of A, and [A]t is the concentration of A at another time.

The process of integration is beyond the scope of this textbook, but is covered in most calculus textbooks and courses. The most useful aspect of the integrated rate law is that it can be rearranged to have the general form of a straight line (y = mx + b).

ln [A]t= -kt + ln [A]0

(y = mx + b)

Therefore, if we were to graph the natural logarithm of the concentration of a reactant (ln) versus time, a reaction that has a first-order rate law will yield a straight line, while a reaction with any other order will not yield a straight line (Figure 15.7 “Concentration vs. Time, First-Order Reaction”). The slope of the straight line corresponds to the negative rate constant, –k, and the y-intercept corresponds to the natural logarithm of the initial concentration.

This graph shows the plot of the natural logarithm of concentration versus time for a first-order reaction.

Example 4 The decomposition of a pollutant in water at 15oC occurs with a rate constant of 2.39 y-1, following first-order kinetics. If a local factory spills 6,500 moles of this pollutant into a lake with a volume of 2,500 L, what will the concentration of pollutant be after two years, assuming the lake temperature remains constant at 15oC? Solution We are given the rate constant and time and can determine an initial concentration from the number of moles and volume given. [Pollutant]0= (6500 mol)/(2500 L) = 2.6 M We can substitute this data into the integrated rate law of a first-order equation and solve for the concentration after 2.0 years: ln [Pollutant]2y = -kt + ln [Pollutant]0 ln [Pollutant]2y = -(2.39 y-1) (2.0 y) + ln (2.6 M) ln [Pollutant]2y = -4.78 + 0.955 ln [Pollutant]2y = -3.82 [Pollutant]2y = e-3.82 = 0.022 M

Second-Order Reactions

The rate for second-order reactions depends either on two reactants raised to the first power or a single reactant raised to the second power. We will examine a reaction that is the latter type: C → D. The differential rate law can be written:

Rate of reaction = – ∆[C]/∆t = k[C]2

The integrated rate law can be written in the form of a straight line as:

1/[C]t = kt + 1/[C]0

Therefore, if the reaction is second order, a plot of 1/[C]t versus t will produce a straight line with a slope that corresponds to the rate constant, k, and a y-intercept that corresponds to the inverse of the initial concentration, 1/[C]0 (Figure 15.8. “1/[C]t vs. Time, Second-Order Reaction”).

. The graph shows a plot of 1/[C]

versus time for a second-order reaction.

Zero-Order Reactions

Zero-order reaction rates occur when the rate of reactant disappearance is independent of reactant concentrations. The differential rate law for the hypothetical zero-order reaction E → F could be written as:

Rate of reaction = – ∆[E]/∆t = k

The integrated rate law can be written in the form of a straight line as:

[E]t = -kt + [E]0

Therefore, if the reaction is zero order, a plot of [E] versus t will produce a straight line with a slope that corresponds to the negative of the product of the rate constant and time, –kt, and a y-intercept that corresponds to the initial concentration, [E]0 (Figure 15.9. “Concentration vs. Time, Zero-Order Reaction”).

. The graph shows the plot of concentration versus time for a zero-order reaction.

Graphical Methods for Determining Reaction Order–A Summary

We have just seen that first-, second-, and zero-order reactions all have unique, integrated rate-law equations that allow us to plot them as a straight line (y = mx + b) (Table 15.1 “Integrated Rate Law Summary”). When presented with experimental concentration–time data, we can determine the order by simply plotting the data in different ways to obtain a straight line.

Example 5 The following data were obtained for the reaction 3 A → 2 B:	Time, s	0	5	10	15	20
[A], M	0.200	0.0282	0.0156	0.0106	0.008
Determine the order of the reaction. Solution We can plot the characteristic kinetic plots of zero-, first-, and second-order reactions to determine which will give a straight line.	Time, s	[A], mol L-1	ln [A]	1/[A], L mol-1
0	0.200	-1.61	5.00
5	0.0282	-3.57	35.5
10	0.0156	-4.16	64.1
15	0.0106	-4.55	94.3
20	0.008	-4.83	125
Example Kinetics Plots The reaction is second order since 1/[A]t versus t gives a straight line.

Half-Life

The half-life of a reaction, t1/2, is the duration of time required for the concentration of a reactant to drop to one-half of its initial concentration.

[A]1/2= ½ [A]0

Half-life is typically used to describe first-order reactions and serves as a metric to discuss the relative speeds of reactions. A slower reaction will have a longer half-life, while a faster reaction will have a shorter half-life.

To determine the half-life of a first-order reaction, we can manipulate the integrated rate law by substituting t1/2 for t and [A]t1/2 = [A]0 for [A]t, then solve for t1/2:

ln = –kt + ln (integrated rate law for a first-order reaction)

ln ½ [A]0 = -k t1/2 + ln [A]0

ln (½ [A]0)/([A]0) = -k t1/2

ln ½ = – k t1/2

t1/2 = – (ln ½)/k = 0.693/k

Since the half-life equation of a first-order reaction does not include a reactant concentration term, it does not rely on the concentration of reactant present. In other words, a half-life is independent of concentration and remains constant throughout the duration of the reaction. Consequently, plots of kinetic data for first-order reactions exhibit a series of regularly spaced t1/2 intervals (Figure 15.10 “Generic First-Order Reaction Kinetics Plot”).

This graph shows repeating half-lives on a kinetics plot of a generic first-order reaction.

Example 6 A reaction having a first-order rate has a rate constant of 4.00 x 10-3 s-1. 1. Determine the half-life. 2. How long will it take for a sample of reactant at 1.0 M to decrease to 0.25 M? 3. What concentration of the 1.0 M sample of reactant would you expect to be present after it has reacted for 500 s? Solution 1. t1/2 = 0.693/k = 0.693/ (4.00 x 10-3 s-1) = 173 s 2. A simple way to calculate this is to determine how many half-lives it will take to go from 1.00 M to 0.250 M and use the half-life calculated in part 1. 1 half-life = 0.500 M 2 half-lives = 0.250 M Therefore, it will take 2 x 173 s = 346 s. 3. We can use the rate-constant value in the integrated rate law to determine the concentration remaining. ln ([A]t/[A]0)= -kt ln ([A]t/1.0 M)= -(4.00 x 10-3 s-1)(500 s) ln ([A]t/1.0 M) = -2 ([A]t/1.0 M) = e-2 = 0.135 [A]t = 0.14 M

Key Takeaways

The reaction rate may be determined by monitoring the concentration of reactants or products in a single trial over a period of time and comparing it to what is expected mathematically for a first-, second-, or zero-order reaction.

The half-life of a reaction is the duration of time required for the concentration of a reactant to drop to one-half of its initial concentration.

Chapter 110

15.5 Activation Energy and the Arrhenius Equation

Learning Objectives

To gain an understanding of activation energy.

To determine activation energy graphically or algebraically.

Figure 15.11.

Svante Arrhenius/Public Domain

Earlier in the chapter, reactions were discussed in terms of effective collision frequency and molecule energy levels. In 1889, a Swedish scientist named Svante Arrhenius proposed an equation that relates these concepts with the rate constant:

k = Ae-Ea/RT

where k represents the rate constant, Ea is the activation energy, R is the gas constant (8.3145 J/K mol), and T is the temperature expressed in Kelvin. A is known as the frequency factor, having units of L mol-1 s-1, and takes into account the frequency of reactions and likelihood of correct molecular orientation.

The Arrhenius equation allows us to calculate activation energies if the rate constant is known, or vice versa. As well, it mathematically expresses the relationships we established earlier: as activation energy term Ea increases, the rate constant k decreases and therefore the rate of reaction decreases.

Determining the Activation Energy

Graphically

We can graphically determine the activation energy by manipulating the Arrhenius equation to put it into the form of a straight line. Taking the natural logarithm of both sides gives us:

ln k = -(Ea/RT) + ln A

A slight rearrangement of this equation then gives us a straight line plot (y = mx + b) for ln k versus 1/T, where the slope is –Ea/R:

ln k = – (Ea/R)(1/t) + ln A

Example 7 Using the data from the following table, determine the activation energy of the reaction:	Temperature (K)	Rate Constant, k (s -1 )
375	1.68 x 10 -5
400	3.5 x 10 -5
500	4.2 x 10 -4
600	2.11 x 10 -3
Solution We can obtain the activation energy by plotting ln k versus 1/T, knowing that the slope will be equal to –(Ea/R). First determine the values of ln k and 1/T, and plot them in a graph:	1/ T	ln k
0.002667	-10.9941
0.0025	-10.2602
0.002	-7.77526
0.001667	-6.16107
Graphical determination of Ea example plot Slope = – (Ea/R) -4865 K = – Ea/(8.3145 J K-1 mol-1) Ea = 4.0 x 104 J/mol

Algebraically

The activation energy can also be calculated algebraically if k is known at two different temperatures:

At temperature 1: ln k1 = -(Ea/RT1) + ln A

At temperature 2: ln k2 = -(Ea/RT2) + ln A

We can subtract one of these equations from the other:

ln k1 – ln k2 = {-(Ea/RT1) + ln A} – {-(Ea/RT2) + ln A}

This equation can then be further simplified to:

ln (k1/k2) = (Ea/R){(1/T2)-(1/T1)}

Example 8 Determine the value of Ea given the following values of k at the temperatures indicated: 600 K: k = 2.75 x 10-8 L mol-1 s-1 800 K: k = 1.95 x 10-7 L mol-1 s-1 Solution Substitute the values stated into the algebraic method equation: ln (k1/k2) = (Ea/R){(1/T2)-(1/T1)} ln (2.75 x 10-8 L mol-1 s-1/1.95 x 10-7 L mol-1 s-1) = (Ea/8.3145 J K-1 mol-1){(1/800K)-(1/600K)} 1.96 = (Ea/8.3145 J K-1 mol-1)(-4.16 x 10-4 K-1 ) 4.704 x 10-3 K-1 = Ea/8.3145 J K-1 mol-1 Ea= 3.92 x 104 J/mol

Key Takeaways

The activation energy can be graphically determined by manipulating the Arrhenius equation.

The activation energy can also be calculated algebraically if k is known at two different temperatures.

Chapter 111

15.6 Reaction Mechanisms

Learning Objectives

To gain an understanding of reaction mechanisms, including the concepts of elementary steps and molecularity.

To become familiar with reaction potential energy diagrams.

To gain an understanding of rate-determining steps in multistep reactions.

For us to truly understand a chemical reaction, including its rate, it would be ideal to see the exact bond-making and bond-breaking steps that occur at the molecular level – the reaction mechanism. Unfortunately, we cannot watch reactions occurring at the molecular level, but we can infer these events using kinetics and other chemical methods.

Elementary Steps

Each event that occurs in a chemical reaction as a result of an effective collision is known as an elementary step. The total number of molecules that participate in the effective collision of an elementary step is known as its molecularity. Molecularity can be used to classify elementary steps into three categories:

Unimolecular – Only one molecule participates

Bimolecular – Two molecules participate

Termolecular – Three molecules participate

There are only three main categories of molecularity because it is rare that more than three molecules participate simultaneously in an effective collision.

Elementary Steps and Rate Laws

A complete chemical reaction may occur in one or more elementary steps, each having its own rate law. The rate of a single elementary step can be derived directly from its stoichiometric equation, since it is an individual effective collision describing a single bond-breaking or bond-forming event. This explains why the rate law of an overall reaction, potentially involving several steps, does not necessarily correlate to the stoichiometry of its balanced chemical equation. For example:

5 Br–(aq) + BrO3–(aq) + 6 H+(aq) → 3 Br2(ℓ) + 3 H2O(ℓ)

Rate = k[Br–][BrO3–][H+]2

However, the rate law for an elementary step is determined from its molecularity: the number of molecules involved in the single effective collision (Table 15.2 “Elementary Steps and Their Rate Laws”). For the following elementary step:

A → B

Rate = k[A]

This is a unimolecular step, and as the concentration of reactant A molecules increases, the number of effective collisions also increases.

Table 15.2 Elementary Steps and Their Rate Laws

Elementary Step	Molecularity	Rate Law
A → B	Unimolecular	Rate = k [A]
2 A → C	Bimolecular	Rate = k [A] 2
2 A + D → E	Termolecular	Rate = k [A] 2 [D]

Multistep Mechanisms

The overall reaction process often corresponds to a series of two or more elementary steps, which must always add up to give the overall balanced chemical equation. For example, in the following elimination reaction (a type of reaction typically discussed in introductory organic chemistry courses):

C4H9Br + H2O → C4H8 + H3O+ + Br–

This reaction process proceeds in two elementary steps and would therefore be called a two-step mechanism. In the first step, bromide leaves from the starting material to give the cation C4H9+. In the second step, C4H9+ reacts with water to generate the product C4H8 and H3O+.

1. C4H9Br ⇌ C4H9+ + Br– (slow)

2. C4H9+ + H2O ⇌ C4H8 + H3O+

Net: C4H9Br + H2O → C4H8 + H3O+ + Br–

The cation C4H9+ is called an intermediate, since it does not appear in the overall balanced equation and is generated in one elementary step but used up in a subsequent step. A potential energy diagram for this multistep reaction can be drawn as shown in Figure 15.12 “Multistep Reaction Potential Energy Diagram.” Notice each step has its own activation energy, and transition state (or activated complex), which is the highest-energy transitional point in the elementary step. Transition states are very unstable (high energy) as bonds are in the process of breaking or forming, and therefore transition states cannot be isolated. Intermediates are more stable than transition states and can sometimes be isolated and characterized by certain techniques.

The Rate-Determining Step

For multistep mechanisms, there is often one step that is significantly slower than the other steps. This slowest step is referred to as the rate-determining step, as it limits the rate of the entire reaction. An analogy that illustrates this concept is an hourglass having two different sized openings. The rate of the sand falling to the bottom-most chamber is determined by the smaller of the two openings (Figure 15.13 “Rate-Determining Point in an Hourglass”). Similarly, the rate law of the overall reaction is determined from its rate-determining slowest step.

Double hourglass with one opening smaller than the other, which determines rate

Example 9 The following reaction occurs in a two-step mechanism: A → B + C (slow) A + C → B + D (fast) 1. Determine the overall reaction equation. 2. Write the rate law for the overall reaction. Solution 1. Add the two elementary steps together and cancel out any intermediates to give the overall reaction: 2 A → 2 B + D 2. Rate = k[A]2

Key Takeaways

The overall reaction process often corresponds to a series of more than one elementary step, which must always add up to give the overall balanced chemical equation.

Each step has its own activation energy and transition state.

The slowest step of a multistep reaction is the rate-determining step.

Chapter 112

15.7 Catalysis

Learning Objectives

To gain an understanding of homogenous, heterogenous, and biological catalysts.

Catalysts are substances that lower the activation energy of a specific reaction by providing an alternate reaction pathway. Catalysts participate in a reaction, but are not permanently changed in the process, as they are regenerated to their original state. Many scientists classify catalysts into one of three categories: homogeneous catalysts, heterogeneous catalysts, and biological catalysts (enzymes).

Homogeneous Catalysts

A homogeneous catalyst is any catalyst that is present in the same phase as the reactant molecules. There are numerous examples of homogeneous catalysts, and we will examine one that is commonly used in textbooks.

The alkene but-2-ene can exist as one of two isomers: cis where the methyl groups are located on the same side of the double bond, and trans where the methyl groups are located on opposite sides of the double bond (Figure 15.14 “Isomerization of But-2-ene”). To convert (isomerize) between the two structures, the carbon-carbon double bond must be broken and the molecule must rotate. This process has a relatively high activation energy of approximately 264 kJ/mol and is therefore fairly slow to occur at room temperature.

But-2-ene can exist as one of two isomers. This diagram shows the isomerization of but-2-ene.

A catalyst like iodine can be used to provide an alternate pathway for the reaction with a much lower activation energy of approximately 118 kJ/mol (Figures 15.15 “Catalyzed and Uncatalyzed Reaction Pathways”).

Potential energy diagrams of catalyzed and uncatalyzed reaction pathways.

In the catalyzed pathway, an iodine atom is generated that reacts with cis-but-2-ene to produce a reaction intermediate that has broken its carbon-carbon double bond and formed a new C-I bond and a radical (Figure 15.16 “But-2-ene Catalyzed Isomerization Steps”). The molecule can rotate more easily and the C-I breaks to reform the double bond.

Heterogeneous Catalysts

Heterogeneous catalysts are those that are in a different phase from one or more of the reactants. Commonly solid metals and metal oxides are used to catalyze the reactions of gaseous or liquid reactants. Solid catalysts often serve as a surface on which reactions can occur, where one or more reactants will adsorb (bind to the surface) to the solid.

A common example of heterogeneous catalysis is the hydrogenation reaction of simple alkenes. The conversion of ethene (C2H4) to ethane (C2H6) can be performed with hydrogen gas in the presence of a metal catalyst such as palladium (Figure 15.17 “Conversion of Ethene to Ethane with Hydrogen and a Metal Catalyst”).

C2H4(g) + H2(g) → C2H6(g)

Ethene and hydrogen adsorb onto the metal surface, where the H2 breaks into two individual hydrogen atoms bonded to the metal surface. A reaction occurs between adjacent ethene and hydrogen atoms on the metal surface, first to generate a C2H5 intermediate, then to generate ethane, C2H6, which desorbs from the surface.

Biological Catalysts

Catalysts within living things facilitate the vast and intricate system of chemical reactions required for life. There are two main types of naturally occurring catalytic biomolecules: ribozymes and enzymes.

Ribozymes are ribonucleic acid (RNA) molecules capable of catalyzing certain chemical reactions. Ribozymes are a relatively recent discovery, first reported in 1982, but their importance was demonstrated by the awarding of the 1989 Nobel Prize to the discoverers Sidney Altman and Thomas Cech. Research is ongoing to better understand these catalysts and develop new therapeutics and medicines using them.

Enzymes are protein molecules that catalyze biochemical reactions. They are remarkably specific for the reactants they can use, known as substrates, and many dramatically increase reaction rate by factors of 107 to 1014. A simple model often used to describe enzyme activity is known as the lock-and-key model (Figure 15.18 “Lock-and-Key Model of Enzymatic Catalysis”). In this model, enzymes accelerate reactions by providing a tight-fitting area, known as the active site, where substrate molecules can react. Hydrophobicity and intermolecular forces such as hydrogen bonding, London-dispersion forces, and dipole-dipole interactions facilitate the binding of substrate molecules to the active site, forming an enzyme-substrate complex. When the reaction is completed at the active site, the product is released.

Figure 15.18. Lock-and-Key Model of Enzymatic Catalysis.

“Enzyme mechanism” by Aejahnke/CC-BY-SA-3.0

Key Takeaways

Catalysts provide an alternate, lower-energy reaction pathway.

A homogeneous catalyst is any catalyst that is present in the same phase as the reactant molecules.

Heterogeneous catalysts are in a different phase from one or more of the reactants, and often act as a surface on which the reaction can occur.

According to the lock-and-key model, enzymes accelerate reactions by providing a tight-fitting area, where substrate molecules can react.

Chapter 113

15.8 End-of-Chapter Material

Exercises

1. What factors affect the rate of a reaction?

2. How does a decrease in temperature affect the reaction rate? Explain the outcome by describing changes that occur at the molecular level.

3. For which of the following two reactions would you expect the orientation of the molecules to be more important?

a) AB + C → AC + B

b) D + E → F

4. Determine the relative rates of disappearance of reactants and formation of products for the following reactions:

a) N2(g) + 3 H2(g) → 2 NH3(g)

b) 2 A + 3 B → 4 C

c) 2 N2O5 → 4 NO2 + O2

5. Methanol reacts with hydrochloric acid to produce methyl chloride and water by the following reaction:

CH3OH(aq) + HCl(aq) → CH3Cl(aq) + H2O(ℓ)

The following data were obtained for this reaction at a particular temperature:

Time (min)	[CH 3 OH] (M)
0.0	1.95
60.0	1.50
120.0	1.24
180.0	1.04
240.0	0.85
300.0	0.70

a) Calculate the average reaction rate between 0 and 60 minutes and 180 and 240 minutes. Which is faster? Explain using your knowledge of factors that can affect rate.

b) Determine the instantaneous rate at 200 minutes.

6. For the following reaction: 3 E + 2 F → 2 G, the rate law is:

Rate = k[F]2

a) How does the rate change if [E] is doubled?

b) How does the rate change is [F] is doubled?

c) What is the overall reaction order?

d) What are the units for the rate constant for this reaction?

7. The rate of oxidation of bromide ions by bromate in an acidic aqueous solution is

6 H+ + BrO3– + 5 Br– → 3 Br2 + 3 H2O

and is found to follow the rate law

Rate = k[Br–][BrO3–][H+]2

What happens to the rate if, in separate experiments:

a) [BrO3–] is doubled?

b) the pH is increased by one unit?

c) the solution is diluted to twice its volume, with the pH kept constant by use of a buffer? 2

8. The following data was obtained using the initial rate method:

A + B → C + D

Experiment	[A] (M)	[B] (M)	Initial Rate (M/s)
1	2.0 x 10 -3	2.0 x 10 -3	1.45 x 10 -4
2	4.0 x 10 -3	2.0 x 10 -3	2.90 x 10 -4
3	2.0 x 10 -3	4.0 x 10 -3	2.90 x 10 -4

a) Determine the rate law for this equation.

b) Calculate the rate constant, including units.

c) Determine the rate when [A] = 0.250 M and [B] = 0.100 M

9. A study of the gas-phase reduction of nitric oxide by hydrogen

2 NO + 2 H2 → N2 + 2 H2O

yielded the following initial-rate data (all pressures in torr):

Experiment	P(NO)	P(H2)	Initial Rate (torr s–1)
1	359	300	1.50
2	300	300	1.03
3	152	300	0.25
4	300	289	1.00
5	300	205	0.71
6	200	147	0.51

Find the order of the reaction with respect to each component.2

10. What should be plotted on the x- and y-axis to obtain a straight line for:

a) a first-order reaction?

b) a zero-order reaction?

11. What does the slope represent for:

a) a second-order reaction kinetic plot?

b) a first-order reaction kinetic plot?

12. Common sugar, sucrose C12H22O11, reacts in dilute acidic solutions to produce glucose and fructose, both having the molecular formula C6H1206.

C12H22O11(aq) + H2O(ℓ) → 2 C6H1206(aq)

During an experiment, the following data were obtained:

Time (hours)	[Sucrose] (mM)
0	316
0.65	274
1.33	238
2.33	190
3.5	146

a) What is the order of the reaction?

b) Determine the rate law and the rate constant.

c) Calculate the expected concentration of sucrose after 100 min.

13. The half-life of a first-order reaction was found to be 10 min at a certain temperature. What is its rate constant in reciprocal seconds?2

14. The mass-241 isotope of americium, widely used as an ionizing source in smoke detectors, has a half-life of 432 years.

a) What fraction of the Am241 in a smoke detector will have decayed after 50 years?

b) How long will it take for the activity to decline to 80% of its initial value?

c) What would be the “seventh-life” of Am241?4

15. A widely used “rule of thumb” for the temperature dependence of a reaction rate is that a 10°C rise in the temperature approximately doubles the rate. (This is obviously not generally true, especially when a strong covalent bond must be broken.) For a reaction that shows this behaviour, what would the activation energy be?3

16. The temperature dependence of the rate constant, k, for a reaction was found to be:

Temperature (K)	k (M -1 s -1 )
500	0.025
600	0.3
700	1.5
800	7
900	28

Calculate the activation energy (Ea) and A.

17. State the molecularity and rate law for each of the following elementary steps:

a) Cl(g) + CCl3(g) → CCl4(ℓ)

b) Br2 → 2 Br

c) 2 A → B

18. A reaction is believed to occur by the following two elementary steps:

a) 2 NO2 → NO3 + NO

b) NO3 → NO + O2

c) Write the balanced overall equation of this reaction

d) Identify any intermediates in the mechanism.

e) If the first step is much slower than the second, what would you expect the rate law for the overall reaction to be?

19. Use the following potential energy diagram to answer questions 19.1 to 19.3:

a) How many steps are in this mechanism?

b) How many intermediates are there in this reaction?

c) What is the slowest step?

20. What is a catalyst? Explain how a catalyst affects reaction rates.

21. Many solid catalysts are commercially sold as fine powders or small spherical beads. Explain why this might be beneficial.

Answers

1.

temperature, reactant concentrations, physical state (surface area of solids), presence of a catalyst

3.

AB + C → AC + B

5.

a) average reaction rate 0-60 minutes = (1.50 M – 1.95 M) / (60.0 min – 0.0 min) = 7.50 x 10-3 M/min

average reaction rate 180-240 minutes = (0.85 M – 1.04 M) / (240.0 min – 180.0 min) = 3.17 x 10-3 M/min

Therefore the average reaction rate between 0-60 minutes is faster. This is because, as the reaction proceeds, the reactant gets consumed to make product, lowering the concentration of reactants.

b)

Instantaneous rate at 200 minutes.

-Rise/Run = (1.0 M – 0.84 M) / (230 min – 180 min) = 0.16 M / 50 min = 3.2 x 10-3 M/min

7.

a) Since the rate is first-order in bromate, doubling its concentration will double the reaction rate.

b) Increasing the pH by one unit will decrease the [H+] by a factor of 10. Since the reaction is second-order in [H+], this will decrease the rate by a factor of 100.

c) Dilution reduces the concentrations of both Br2 and BrO3– to half their original values. Doing this to each concentration alone would reduce the rate by a factor of 2, so reducing both concentrations will reduce the rate by a factor of 4, to (½)×(½) = ¼ of its initial value.

9.

Experiments 2 and 3: Reduction of the initial partial pressure of NO by a factor of about 2 (300/152) results in a reduction of the initial rate by a factor of about 4, so the reaction is second-order in nitric oxide.

Experiments 4 and 6: Reducing the initial partial pressure of hydrogen by a factor of approximately 2 (289/147) causes a similar reduction in the initial rate, so the reaction is first-order in hydrogen.

The rate law is: rate = k[NO]2[H2].

11.

a) k

b) – k

13.

From the above equation, k = –0.693/(600 s) = 0.00115 s–1

15.

We will center our ten-degree interval at 300 K. Substituting into the above expression yields

= (8.314)(0.693) / (.00339 – 0.00328)

= (5.76 J mol–1 K–1) / (0.00011 K–1) = 52400 J mol–1 = 52.4 kJ mol–1

17.

a) bimolecular, rate = k [Cl] [CCl3]

b) unimolecular , rate = k [Br2]

c) bimolecular 2 A , rate = k [A]2

19.

a) 3 steps

b) 2 intermediates

c) The second step is the slowest step

21.

Finely divided powders and spherical beads have larger surface areas than big solid chunks, allowing for more sites for reactions to occur, which further speeds up the reaction.

PART XI

Unit 11 Oxidation & Reduction

Chapter 114

Chapter 16. Oxidation and Reduction

Introduction to Oxidation and Reduction

Most of us are familiar with rusty iron: metal that has a dark red-brown scale that falls off an object, ultimately weakening it. Although we usually attribute rusting exclusively to iron, this process occurs with many materials. The more formal term for rusting is corrosion.

Figure 16.1 These support beams on a bridge are obviously rusted. If the rusting becomes too bad, it will compromise the integrity of the bridge, requiring replace- ment.

Source: “rusty bridge bearing” by Fabian is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 2.0 Generic

Corrosion is defined as the disintegration of a material due to chemical reactions with other substances in the environment. In many cases, oxygen in the air causes the disintegration. Corrosion is not uniformly destructive. Although the corrosion of iron is generally considered bad, the corrosion of aluminum and copper forms a protective barrier on the surface of the metal, protecting it from further reaction with the environment.

Having said that, it has been estimated that as much as 5% of expenditures in the United States apply to fixing problems caused by corrosion. The replacement of structures built with iron, steel, aluminum, and concrete must be performed regularly to keep these structures safe. As an example of what might happen, consider the story of the Silver Bridge on US Interstate 35, connecting West Virginia and Ohio. On December 15, 1967, the 39-year-old bridge collapsed, killing 46 people. The ultimate cause of the collapse was determined to be corrosion of a suspension chain on the Ohio side of the bridge.

Corrosion is an example of the type of chemical reaction discussed in this chapter. Although we usually think of corrosion as bad, the reaction it typifies can actually be put to good use.

One important type of chemical reaction is the oxidation-reduction reaction, also known as the redox reaction. Although we introduced redox reactions in Chapter 5 “Chemical Reactions and Equations”, Section 5.6 “Oxidation-Reduction Reactions”, it is worth reviewing some basic concepts.

Chapter 115

16.1 Oxidation-Reduction Reactions

Learning Objectives

Define oxidation and reduction.

Assign oxidation numbers to atoms in simple compounds.

Recognize a reaction as an oxidation-reduction reaction.

Consider this chemical reaction:

Mg(s) + Cl2(g) → MgCl2

The reactants are two electrically neutral elements; they have the same number of electrons as protons. The product, however, is ionic; it is composed of Mg2+ and Cl− ions. Somehow, the individual Mg atoms lose two electrons to make the Mg2+ ion, while the Cl atoms gain an electron to become Cl− ions. This reaction involves the transfer of electrons between atoms.

The process of losing and gaining electrons occurs simultaneously. However, mentally we can separate the two processes. Oxidation is defined as the loss of one or more electrons by an atom. Reduction is defined as the gain of one or more electrons by an atom. So oxidation and reduction always occur together; it is only mentally that we can separate them. Chemical reactions that involve the transfer of electrons are called oxidation-reduction (or redox) reactions.

Redox reactions require that we keep track of the electrons assigned to each atom in a chemical reaction. How do we do that? We use oxidation numbers to keep track of electrons in atoms. Oxidation numbers are assigned to atoms based on four rules. Oxidation numbers are not necessarily equal to the charge on the atom (although sometimes they can be); we must keep the concepts of charge and oxidation numbers separate.

The rules for assigning oxidation numbers to atoms are as follows:

Atoms in their elemental state are assigned an oxidation number of 0.

Atoms in monatomic (i.e., one-atom) ions are assigned an oxidation number equal to their charge. Oxidation numbers are usually written with the sign first, then the magnitude, to differentiate them from charges.

In compounds, fluorine is assigned a −1 oxidation number; oxygen is usually assigned a −2 oxidation number [except in peroxide compounds (where it is −1) and in binary compounds with fluorine (where it is positive)]; and hydrogen is usually assigned a +1 oxidation number [except when it exists as the hydride ion (H−), in which case rule 2 prevails].

In compounds, all other atoms are assigned an oxidation number so that the sum of the oxidation numbers on all the atoms in the species equals the charge on the species (which is zero if the species is neutral).

Here are some examples for practice. In H2, both H atoms have an oxidation number of 0 by rule 1. In MgCl2, magnesium has an oxidation number of +2, while chlorine has an oxidation number of −1 by rule 2. In H2O, the H atoms each have an oxidation number of +1, while the O atom has an oxidation number of −2, even though hydrogen and oxygen do not exist as ions in this compound (rule 3). By contrast, by rule 3, each H atom in hydrogen peroxide (H2O2) has an oxidation number of +1, while each O atom has an oxidation number of −1. We can use rule 4 to determine oxidation numbers for the atoms in SO2. Each O atom has an oxidation number of −2; for the sum of the oxidation numbers to equal the charge on the species (which is zero), the S atom is assigned an oxidation number of +4. Does this mean that the sulfur atom has a 4+ charge on it? No, it means only that the S atom is assigned a +4 oxidation number by our rules of apportioning electrons among the atoms in a compound.

Example 1 Assign oxidation numbers to the atoms in each substance. Cl2 GeO2 Ca(NO3)2 Solution Cl2 is the elemental form of chlorine. Rule 1 states each atom has an oxidation number of 0. By rule 3, oxygen is normally assigned an oxidation number of −2. For the sum of the oxidation numbers to equal the charge on the species (zero), the Ge atom is assigned an oxidation number of +4. Ca(NO3)2 can be separated into two parts: the Ca2+ ion and the NO3− ion. Considering these separately, the Ca2+ ion has an oxidation number of +2 by rule 2. Now consider the NO3− ion. Oxygen is assigned an oxidation number of −2, and there are three of them. According to rule 4, the sum of the oxidation numbers on all atoms must equal the charge on the species, so we have the simple algebraic equation x + 3(−2) = −1 where x is the oxidation number of the N atom and the −1 represents the charge on the species. Evaluating for x, x + (−6) = −1
x = +5 Thus the oxidation number on the N atom in the NO3− ion is +5. Test Yourself Assign oxidation numbers to the atoms in H3PO4. Answer H: +1; O: −2; P: +5

All redox reactions occur with a simultaneous change in the oxidation numbers of some atoms. At least two elements must change their oxidation numbers. When an oxidation number of an atom is increased in the course of a redox reaction, that atom is being oxidized. When an oxidation number of an atom is decreased in the course of a redox reaction, that atom is being reduced. Thus oxidation and reduction can also be defined in terms of increasing or decreasing oxidation numbers, respectively.

Example 2 Identify what is being oxidized and reduced in this redox reaction. 2 Na + Br2 → 2 NaBr Solution Both reactants are the elemental forms of their atoms, so the Na and Br atoms have oxidation numbers of 0. In the ionic product, the Na+ ions have an oxidation number of +1, while the Br− ions have an oxidation number of −1. Sodium is increasing its oxidation number from 0 to +1, so it is being oxidized; bromine is decreasing its oxidation number from 0 to −1, so it is being reduced: Because oxidation numbers are changing, this is a redox reaction. The total number of electrons being lost by sodium (two, one lost from each Na atom) is gained by bromine (two, one gained for each Br atom). Test Yourself Identify what is being oxidized and reduced in this redox reaction. C + O2 → CO2 Answer C is being oxidized from 0 to +4; O is being reduced from 0 to −2.

Oxidation reactions can become quite complex, as attested by the following redox reaction:

Food and Drink App: Fortifying Food with Iron

Iron is an essential mineral in our diet; iron-containing compounds like the heme protein in hemoglobin could not function without it. Most biological iron has the form of the Fe2+ ion; iron with other oxidation numbers is almost inconsequential in human biology (although the body does contain an enzyme to reduce Fe3+ to Fe2+, so Fe3+ must have some biological significance, albeit minor). To ensure that we ingest enough iron, many foods are enriched with iron. Although Fe2+ compounds are the most logical substances to use, some foods—bread and breakfast cereals are the most well-known examples—use “reduced iron” as an ingredient. Reduced iron is simply iron metal; iron is added as a fine metallic powder. The metallic iron is oxidized to Fe2+ in the digestive system and then absorbed by the body, but the question remains: Why are we ingesting metallic iron? Why not just use Fe2+ salts as an additive?

Although it is difficult to establish conclusive reasons, a search of scientific and medical literature suggests a few reasons. One reason is that fine iron filings do not affect the taste of the product. The size of the iron powder (several dozen micrometers) is not noticeable when chewing iron-supplemented foods, and the tongue does not detect any changes in flavour that can be detected when using Fe2+ salts. Fe2+ compounds can affect other properties of foodstuffs during preparation and cooking, like dough pliability, yeast growth, and color. Finally, of the common iron substances that might be used, metallic iron is the least expensive. These factors appear to be among the reasons why metallic iron is the supplement of choice in some foods.

Key Takeaways

Oxidation-reduction (redox) reactions involve the transfer of electrons from one atom to another.

Oxidation numbers are used to keep track of electrons in atoms.

There are rules for assigning oxidation numbers to atoms.

Oxidation is an increase in oxidation number (loss of electrons); reduction is a decrease in oxidation number (gain of electrons).

Exercises

Is this reaction a redox reaction? Explain your answer.

2 K(s) + Br2(ℓ) → 2 KBr(s)

Is this reaction a redox reaction? Explain your answer.

2 NaCl(aq) + Pb(NO3)2(aq) → 2 NaNO3(aq) + PbCl2(s)

Which substance loses electrons and which substance gains electrons in this reaction?

2 Mg(s) + O2(g) → 2 MgO

Which substance loses electrons and which substance gains electrons in this reaction?

16 Fe(s) + 3 S8(s) → 8 Fe2S3(s)

Which substance is oxidized and which substance is reduced in this reaction?

2 Li(s) + O2(g) → Li2O2(s)

Which substance is oxidized and which substance is reduced in this reaction?

2 Fe(s) + 3 I2(s) → 2 FeI3(s)

What are two different definitions of oxidation?

What are two different definitions of reduction?

Assign oxidation numbers to the atoms in each substance.

a) P4

b) SO3

c) SO32−

d) Ca3(PO3)2

10. Assign oxidation numbers to the atoms in each substance.

a) PCl5

b) (NH4)2Se

c) Ag

d) Li2O2

11. Assign oxidation numbers to the atoms in each substance.

a) NO

b) NO2

c) CrCl2

d) CrCl3

12. Assign oxidation numbers to the atoms in each substance.

a) NaH

b) N2O3

c) NO2−

d) CuNO3

13. Assign oxidation numbers to the atoms in each substance.

a) CH2O

b) NH3

c) Rb2SO4

d) Zn(C2H3O2)2

14. Assign oxidation numbers to the atoms in each substance.

a) C6H6

b) B(OH)3

c) Li2S

d) Au

15. Identify what is being oxidized and reduced in this redox reaction by assigning oxidation numbers to the atoms.

2 NO + Cl2 → 2 NOCl

16. Identify what is being oxidized and reduced in this redox reaction by assigning oxidation numbers to the atoms.

Sr + SO3 → SrSO3

17. Identify what is being oxidized and reduced in this redox reaction by assigning oxidation numbers to the atoms.

2 KrF2 + 2 H2O → 2 Kr + 4 HF + O2

18. Identify what is being oxidized and reduced in this redox reaction by assigning oxidation numbers to the atoms.

SO3 + SCl2 → SOCl2 + SO2

19. Identify what is being oxidized and reduced in this redox reaction by assigning oxidation numbers to the atoms.

2 Rb + MgCl2 → 2 RbCl + Mg

20. Identify what is being oxidized and reduced in this redox reaction by assigning oxidation numbers to the atoms.

2 C8H18 + 25 O2 → 16 CO2 + 18 H2O

Answers

1.

yes because oxidation numbers are changing

3.

lose: Mg; gain: O

5.

oxidized: Li; reduced: O

7.

increase in oxidation number; loss of electrons

9.

a) P: 0

b) S: +6; O: −2

c) S: +4; O: −2

d) Ca: +2; P: +3; O: −2

11.

a) N: +2; O: −2

b) N: +4; O: −2

c) Cr: +2; Cl: −1

d) Cr: +3; Cl: −1

13.

a) C: 0; H: +1; O: −2

b) N: −3; H: +1

c) Rb: +1; S: +6; O: −2

d) Zn: +2; C: 0; H: +1; O: −2

15.

oxidized: N; reduced: Cl

17.

oxidized: O; reduced: Kr

19.

oxidized: Rb; reduced: Mg

Chapter 116

16.2 Balancing Redox Reactions

Learning Objectives

Learn to balanced simple redox reactions by inspection.

Learn to balance complex redox reactions by the half reaction method.

Use the solvent, or parts of it, as a reactant or a product in balancing a redox reaction.

Balancing simple redox reactions can be a straightforward matter of going back and forth between products and reactants. For example, in the redox reaction of Na and Cl2:

Na + Cl2 → NaCl

it should be immediately clear that the Cl atoms are not balanced. We can fix this by putting the coefficient 2 in front of the product:

Na + Cl2 → 2 NaCl

However, now the sodium is unbalanced. This can be fixed by including the coefficient 2 in front of the Na reactant:

2 Na + Cl2 → 2 NaCl

This reaction is now balanced. That was fairly straightforward; we say that we are able to balance the reaction by inspection. Many simple redox reactions can be balanced by inspection.

Example 3 Balance this redox reaction by inspection. SO2 + O2 → SO3 Solution There is one S atom on both sides of the equation, so the sulfur is balanced. However, the reactant side has four O atoms while the product side has three. Clearly we need more O atoms on the product side, so let us start by including the coefficient 2 on the SO3: SO2 + O2 → 2 SO3 This now gives us six O atoms on the product side, and it also imbalances the S atoms. We can balance both the elements by adding coefficient 2 on the SO2 on the reactant side: 2 SO2 + O2 → 2 SO3 This gives us two S atoms on both sides and a total of six O atoms on both sides of the chemical equation. This redox reaction is now balanced. Test Yourself Balance this redox reaction by inspection. Al + O2 → Al2O3 Answer 4 Al + 3 O2 → 2 Al2O3

The first thing you should do when encountering an unbalanced redox reaction is to try to balance it by inspection.

Some redox reactions are not easily balanced by inspection. Consider this redox reaction:

Al + Ag+ → Al3+ + Ag

At first glance, this equation seems balanced: there is one Ag atom on both sides and one Al atom on both sides. However, if you look at the total charge on each side, there is a charge imbalance: the reactant side has a total charge of 1+, while the product side has a total charge of 3+. Something is amiss with this chemical equation; despite the equal number of atoms on each side, it is not balanced.

A fundamental point about redox reactions that has not arisen previously is that the total number of electrons being lost must equal the total number of electrons being gained for a redox reaction to be balanced. This is not the case for the aluminum and silver reaction: the Al atom loses three electrons to become the Al3+ ion, while the Ag+ ion gains only one electron to become elemental silver.

To balance this, we will write each oxidation and reduction reaction separately, listing the number of electrons explicitly in each. Individually, the oxidation and reduction reactions are called half reactions. We will then take multiples of each reaction until the number of electrons on each side cancels completely and combine the half reactions into an overall reaction, which should then be balanced. This method of balancing redox reactions is called the half reaction method. (There are other ways of balancing redox reactions, but this is the only one that will be used in this text. The reason for this will be seen in Chapter 16 “Oxidation and Reduction”, Section 16.3 “Applications of Redox Reactions: Voltaic Cells”.)

The oxidation half reaction involves aluminum, which is being oxidized:

Al → Al3+

This half reaction is not completely balanced because the overall charges on each side are not equal. When an Al atom is oxidized to Al3+, it loses three electrons. We can write these electrons explicitly as products:

Al → Al3+ + 3e−

Now this half reaction is balanced—in terms of both atoms and charges.

The reduction half reaction involves silver:

Ag+ → Ag

The overall charge is not balanced on both sides. But we can fix this by adding one electron to the reactant side because the Ag+ ion must accept one electron to become the neutral Ag atom:

Ag+ + e− → Ag

This half reaction is now also balanced.

When combining the two half reactions into a balanced chemical equation, the key is that the total number of electrons must cancel, so the number of electrons lost by atoms are equal to the number of electrons gained by other atoms. This may require we multiply one or both half reaction(s) by an integer to make the number of electrons on each side equal. With three electrons as products and one as reactant, the least common multiple of these two numbers is three: we can use a single aluminum reaction but must take three times the silver reaction:

Al → Al3+ + 3e−
3 × [Ag+ + e− → Ag]

The 3 on the second reaction is distributed to all species in the reaction:

Al → Al3+ + 3e−
3Ag+ + 3e− → 3Ag

Now the two half reactions can be combined just like two algebraic equations, with the arrow serving as the equals sign. The same species on opposite sides of the arrow can be canceled:

Al + 3Ag++ 3e−→Al3++ 3Ag + 3e−

The net balanced redox reaction is as follows:

Al + 3Ag+ → Al3+ + 3Ag

There is still only one Al atom on each side of the chemical equation, but there are now three Ag atoms, and the total charge on each side of the equation is the same (3+ for both sides). This redox reaction is balanced. It took more effort to use the half reaction method than by inspection, but the correct balanced redox reaction was obtained.

Example 4 Balance this redox reaction by using the half reaction method. Fe2+ + Cr → Fe + Cr3+ Solution We start by writing the two half reactions. Chromium is being oxidized, and iron is being reduced: Cr → Cr3+ oxidation
Fe2+ → Fe reduction Then we include the appropriate number of electrons on the proper side to balance the charges for each reaction: Cr → Cr3+ + 3e−
Fe2+ + 2e− → Fe The first reaction involves three electrons, while the second reaction involves two electrons. The least common multiple of these two numbers is six, so to get six electrons in each reaction we need to double the first reaction and triple the second one: 2 × [Cr → Cr3+ + 3e−] = 2 Cr → 2 Cr3+ + 6e−
3 × [Fe2+ + 2e− → Fe] = 3 Fe2+ + 6e− → 3 Fe We can combine the two final reactions, noting that the electrons cancel: 2 Cr + 3 Fe2++ 6e−→2 Cr3++ 3 Fe + 6e− The overall, balanced redox reaction is 2 Cr + 3 Fe2+ → 2 Cr3+ + 3 Fe Test Yourself Balance this redox reaction by using the half reaction method. O2− + F2 → O2 + F− Answer 2 O2− + 2 F2 → O2 + 4 F−

Many redox reactions occur in aqueous solution—in water. Because of this, in many cases H2O or a fragment of an H2O molecule (H+ or OH−, in particular) can participate in the redox reaction. As such, we need to learn how to incorporate the solvent into a balanced redox equation.

Consider the following oxidation half reaction in aqueous solution, which has one Cr atom on each side:

Cr3+ → CrO4−

Here, the Cr atom is going from the +3 to the +7 oxidation state. To do this, the Cr atom must lose four electrons. Let us start by listing the four electrons as products:

Cr3+ → CrO4− + 4e−

But where do the O atoms come from? They come from water molecules or a common fragment of a water molecule that contains an O atom: the OH− ion. When we balance this half reaction, we should feel free to include either of these species in the reaction to balance the elements. Let us use H2O to balance the O atoms; we need to include four water molecules to balance the four O atoms in the products:

4 H2O + Cr3+ → CrO4− + 4e−

This balances the O atoms, but now introduces hydrogen to the reaction. We can balance the H atoms by adding an H+ ion, which is another fragment of the water molecule. We need to add eight H+ ions to the product side:

4 H2O + Cr3+ → CrO4− + 4e− + 8 H+

The Cr atoms are balanced, the O atoms are balanced, and the H atoms are balanced; if we check the total charge on both sides of the chemical equation, they are the same (3+, in this case). This half reaction is now balanced, using water molecules and parts of water molecules as reactants and products.

Reduction reactions can be balanced in a similar fashion. When oxidation and reduction half reactions are individually balanced, they can be combined in the same fashion as before: by taking multiples of each half reaction as necessary to cancel all electrons. Other species, such as H+, OH−, and H2O, may also have to be canceled in the final balanced reaction.

Unless otherwise noted, it does not matter if you add H2O or OH− as a source of O atoms, although a reaction may specify acidic solution or basic solution as a hint of what species to use or what species to avoid. OH− ions are not very common in acidic solutions, so they should be avoided in those circumstances.

Example 5 Balance this redox reaction. Assume a basic solution. MnO2 + CrO3− → Mn + CrO4− Solution We start by separating the oxidation and reduction processes so we can balance each half reaction separately. The oxidation reaction is as follows: CrO3− → CrO4− The Cr atom is going from a +5 to a +7 oxidation state and loses two electrons in the process. We add those two electrons to the product side: CrO3− → CrO4− + 2e− Now we must balance the O atoms. Because the solution is basic, we should use OH− rather than H2O: OH− + CrO3− → CrO4− + 2e− We have introduced H atoms as part of the reactants; we can balance them by adding H+ as products: OH− + CrO3− → CrO4− + 2e− + H+ If we check the atoms and the overall charge on both sides, we see that this reaction is balanced. However, if the reaction is occurring in a basic solution, it is unlikely that H+ ions will be present in quantity. The way to address this is to add an additional OH− ion to each side of the equation: OH− + CrO3− + OH− → CrO4− + 2e− + H+ + OH− The two OH− ions on the left side can be grouped together as 2OH−. On the right side, the H+ and OH− ions can be grouped into an H2O molecule: 2 OH− + CrO3− → CrO4− + 2e− + H2O This is a more appropriate form for a basic solution. Now we balance the reduction reaction: MnO2 → Mn The Mn atom is going from +4 to 0 in oxidation number, which requires a gain of four electrons: 4e− + MnO2 → Mn Then we balance the O atoms and then the H atoms: 4e− + MnO2 → Mn + 2 OH−
2 H+ + 4e− + MnO2 → Mn + 2 OH− We add two OH− ions to each side to eliminate the H+ ion in the reactants; the reactant species combine to make two water molecules, and the number of OH− ions in the product increases to four: 2 H2O + 4e− + MnO2 → Mn + 4 OH− This reaction is balanced for a basic solution. Now we combine the two balanced half reactions. The oxidation reaction has two electrons, while the reduction reaction has four. The least common multiple of these two numbers is four, so we multiply the oxidation reaction by 2 so that the electrons are balanced: 2 × [2 OH− + CrO3− → CrO4− + 2e− + H2O]
2 H2O + 4e− + MnO2 → Mn + 4 OH− Combining these two equations results in the following equation: 4 OH− + 2 CrO3− + 2 H2O + 4e− + MnO2 → 2 CrO4− + 4e− + 2 H2O + Mn + 4 OH− The four electrons cancel. So do the two H2O molecules and the four OH− ions. What remains is 2 CrO3− + MnO2 → 2 CrO4− + Mn which is our final balanced redox reaction. Test Yourself Balance this redox reaction. Assume a basic solution. Cl− + MnO4− → MnO2 + ClO3− Answer H2O + Cl− + 2 MnO4− → 2 MnO2 + ClO3− + 2 OH−

Key Takeaways

Redox reactions can be balanced by inspection or by the half reaction method.

A solvent may participate in redox reactions; in aqueous solutions, H2O, H+, and OH− may be reactants or products.

Exercises

Balance these redox reactions by inspection.

a) Na + F2 → NaF

b) Al2O3 + H2 → Al + H2O

2. Balance these redox reactions by inspection.

a) Fe2S3 + O2 → Fe2O3 + S

b) Cu2O + H2 → Cu + H2O

3. Balance these redox reactions by inspection.

a) CH4 + O2 → CO2 + H2O

b) P2O5 + Cl2 → PCl3 + O2

4. Balance these redox reactions by inspection.

a) PbCl2 + FeCl3 → PbCl4 + FeCl2

b) SO2 + F2 → SF4 + OF2

5. Balance these redox reactions by the half reaction method.

a) Ca + H+ → Ca2+ + H2

b) Sn2+ → Sn + Sn4+ (Hint: both half reactions will start with the same reactant.)

6. Balance these redox reactions by the half reaction method.

a) Fe3+ + Sn2+ → Fe + Sn4+

b) Pb2+ → Pb + Pb4+ (Hint: both half reactions will start with the same reactant.)

7. Balance these redox reactions by the half reaction method.

a) Na + Hg2Cl2 → NaCl + Hg

b) Al2O3 + C → Al + CO2

8. Balance these redox reactions by the half reaction method.

a) Br− + I2 → I− + Br2

b) CrCl3 + F2 → CrF3 + Cl2

9. Balance these redox reactions that occur in aqueous solution. Use whatever water-derived species is necessary; there may be more than one correct balanced equation.

a) Cu + NO3− → Cu2+ + NO2

b) Fe + MnO4− → Fe3+ + Mn

10. Balance these redox reactions that occur in aqueous solution. Use whatever water-derived species is necessary; there may be more than one correct balanced equation.

a) CrO3 + Ni2+ → Cr3+ + Ni3+

b) OsO4 + C2H4 → Os + CO2

11. Balance these redox reactions that occur in aqueous solution. Use whatever water-derived species is necessary; there may be more than one correct balanced equation.

a) ClO− + Ti2+ → Ti4+ + Cl−

b) BrO3− + Ag → Ag+ + BrO2

12. Balance these redox reactions that occur in aqueous solution. Use whatever water-derived species is necessary; there may be more than one correct balanced equation.

a) H2O2 + NO → N2O3 + H2O

b) VO2+ + NO → V3+ + NO2

13. Explain why this chemical equation is not balanced and balance it if it can be balanced.

Cr2+ + Cl2 → Cr3+ + 2Cl−

14. Explain why this equation is not balanced and balance it if it can be balanced.

O2 + 2 H2O + Br2 → 4 OH− + 2Br−

Answers

1.

a) 2 Na + F2 → 2 NaF

b) Al2O3 + 3 H2 → 2 Al + 3 H2O

3.

a) CH4 + 2 O2 → CO2 + 2 H2O

b) 2 P2O5 + 6 Cl2 → 4 PCl3 + 5 O2

5.

a) Ca + 2 H+ → Ca2+ + H2

b) 2 Sn2+ → Sn + Sn4+

7.

a) 2 Na + Hg2Cl2 → 2 NaCl + 2 Hg

b) 2 Al2O3 + 3 C → 4 Al + 3 CO2

9.

a) 4 H+ + Cu + 2 NO3− → Cu2+ + 2 NO2 + 2 H2O in acidic solution; 2 H2O + Cu + 2 NO3− → Cu2+ + 2 NO2 + 4 OH− in basic solution

b) 24 H+ + 3 MnO4− + 7 Fe → 7 Fe3+ + 3 Mn + 12 H2O in acidic solution; 12 H2O + 3 MnO4− + 7 Fe → 7 Fe3+ + 3 Mn + 24 OH− in basic solution

11.

a) 2 H+ + ClO− + Ti2+ → Cl− + H2O + Ti4+ in acidic solution; H2O + ClO− + Ti2+ → Cl− + Ti4+ + 2 OH− in basic solution

b) 2 H+ + BrO3− + Ag → BrO2 + H2O + Ag+ in acidic solution; H2O + BrO3− + Ag → BrO2 + Ag+ + 2 OH− in basic solution

13.

The charges are not properly balanced. The correct balanced equation is 2 Cr2+ + Cl2 → 2 Cr3+ + 2 Cl−.

Chapter 117

16.3 Applications of Redox Reactions: Voltaic Cells

Learning Objectives

Learn the parts of a voltaic cell.

Combine half reactions to determine the voltage of a voltaic cell.

Understand how voltaic cells are used as batteries.

Consider this redox reaction:

Zn + Cu2+ → Zn2+ + Cu

If you were to mix zinc metal and copper ions in a container, this reaction would proceed by itself; we say that this reaction is spontaneous.

Suppose, however, we set up this reaction in a way depicted in Figure 16.1 “A Redox Reaction in Which the Two Half Reactions Are Physically Separated”. Zinc and zinc ions are on one side of the system, while copper and copper ions are on the other side of the system. The two parts are connected with a wire.

One application of redox reactions requires that they be physically separated.

Even though the two half reactions are physically separated, a spontaneous redox reaction still occurs. However, in this case, the electrons transfer through the wire connecting the two half reactions; that is, this setup becomes a source of electricity. Useful work can be extracted from the electrons as they transfer from one side to the other—for example, a light bulb can be lit, or a motor can be operated. The apparatus as a whole, which allows useful electrical work to be extracted from a redox reaction, is called a voltaic (galvanic) cell.

Each individual system that contains a half reaction is called a half cell. The half cell that contains the oxidation reaction is called the anode, while the half cell that contains the reduction reaction is called the cathode. The cathode and anode collectively are the electrodes of the voltaic cell. Because electrons are coming from the anode, the anode is considered the negative electrode of the cell, while the cathode is considered the positive electrode of the cell. Finally, because electrons are moving from one half cell to the other, a charge imbalance builds up as the reaction proceeds. To counter that, a salt bridge is used; the salt bridge contains a solution of some ionic compound whose ions migrate to either side of the voltaic cell to maintain the charge balance.

The tendency for electrons to go from one half cell to another is called the voltage of the voltaic cell, represented by E. Sometimes the term potential is used to represent the voltage of a cell. Voltage is expressed in volts (V). The voltage of a voltaic cell is determined by the difference in the tendencies of the individual half cells and is characteristic of a given redox reaction when concentrations are specific (1.0 M for dissolved species and 1.0 atm for gases). Because the voltage of a redox reaction is determined by the difference of the tendencies of the individual half reactions, absolute voltages are unnecessary; only relative voltages of each half reaction are needed. The relative voltage of each half cell is represented as E1/2 and is based on the standard that the E1/2 for the reaction

H+ + e− → 1/2 H2

is assigned to be exactly 0.000 V under standard conditions of pressure and concentration. Table 16.1 “Standard Reduction Potentials of Half Reactions” lists some relative E1/2 values for some half reactions. Note that all half reactions are listed as reduction reactions, so these values are called the standard reduction potentials of each half reaction.

Table 16.1 Standard Reduction Potentials of Half Reactions

Reduction Half Reaction	E1/2 (V)
F 2 + 2e − → 2 F −	2.87
Ce 4+ + e − → Ce 3+	1.61
MnO 4− + 8 H + + 5e − → Mn 2+ + 4 H 2 O	1.51
Cl 2 + 2e − → 2Cl −	1.36
O 2 + 4 H + + 4e − → 2 H 2 O	1.23
Br 2 + 2e − → 2 Br −	1.06
NO 3− + 4 H + + 3e − → NO + 2 H 2 O	0.96
Ag + + e − → Ag	0.80
Fe 3+ + e − → Fe 2+	0.77
I 2 + 2e − → 2I −	0.54
Cu 2+ + 2e − → Cu	0.34
AgCl + e − → Ag + Cl −	0.222
Sn 4+ + 2e − → Sn 2+	0.15
2H + + 2e − → H 2	0.000
Pb 2+ + 2e − → Pb	−0.126
Ni 2+ + 2e − → Ni	−0.25
Cr 3+ + e − → Cr 2+	−0.41
Fe 2+ + 2e − → Fe	−0.44
Cr 3+ + 3e − → Cr	−0.74
Zn 2+ + 2e − → Zn	−0.76
Cr 2+ + 2e − → Cr	−0.91
Ba 2+ + 2e − → Ba	−1.57
Al 3+ + 3e − → Al	−1.66
Mg 2+ + 2e − → Mg	−2.37
Na + + e − → Na	−2.714
Li + + e − → Li	−3.045

Table 16.1 “Standard Reduction Potentials of Half Reactions” lists only reduction reactions, but a redox reaction has a reduction and an oxidation. To make the oxidation reaction, simply reverse the reduction reaction in Table 16.1 “Standard Reduction Potentials of Half Reactions” and change the sign on the E1/2 value. If the reduction potential is negative, make the voltage for the oxidation positive; if the reduction potential is positive, make the voltage for the oxidation negative.

Example 6 What is the value of E1/2 for this half reaction? Ag + Cl− → AgCl + e− Solution The given reaction is the reverse of this reaction: AgCl + e− → Ag + Cl− E1/2 = 0.222 V Therefore, the E1/2 of the given reaction is −0.222 V. Test Yourself What is the value of E1/2 for this half reaction? Na → Na+ + e− Answer 2.714 V

To determine the overall voltage of a particular voltaic cell, simply combine the voltages of the oxidation and reduction half reactions. Even if you need to take a multiple of a half reaction for the electrons to cancel, do not take the multiple of the E1/2. Use the values directly as is from Table 16.1 “Standard Reduction Potentials of Half Reactions”.

Spontaneous redox reactions have positive overall voltages. If the voltage of the reaction as written is negative, it is not spontaneous in that direction. Rather, the reverse reaction is the spontaneous redox reaction.

Example 7 What is the voltage of a voltaic cell based on this reaction? Is the reaction spontaneous as written? 2 NO3− + 8 H+ + 3 Cu → 2 NO + 4 H2O + 3 Cu2+ Solution The overall redox reaction is formed from these two half reactions: NO3− + 4 H+ + 3e− → NO + 2 H2O E1/2 = 0.96 V
Cu2+ + 2 e− → Cu E1/2 = 0.34 V The second reaction is reversed in the overall redox reaction, so its voltage changes sign from the reduction reaction: Cu → Cu2+ + 2 e− E1/2 = −0.34 V To obtain the voltage of the voltaic cell based on the overall reaction, we simply combine the two voltages of the half reactions: E = 0.96 + (−0.34) = 0.62 V Because the overall voltage is positive, the reaction is spontaneous as written. Test Yourself What is the voltage of a voltaic cell based on this reaction? Is the reaction spontaneous as written? 5 Ni + 2 MnO4− + 16 H+ → 3 Mn2+ + 8 H2O + 5 Ni2+ Answer 1.76 V; spontaneous

Technically, any redox reaction can be set up to make a voltaic cell. In modern society, however, only certain redox reactions are put to practical use. A portable voltaic cell that generates electricity to power devices for our convenience is called a battery. All batteries are based on redox reactions.

The first battery (called a “voltaic pile”) was constructed by the Italian scientist Alessandro Volta in 1800 and was based on the copper/zinc reaction depicted in Figure 16.1 “A Redox Reaction in Which the Two Half Reactions Are Physically Separated”. Unfortunately, it was messy, requiring quantities of copper and zinc salts dissolved in water. In 1866, the French scientist Georges Leclanché invented the dry cell, a precursor to today’s modern battery. A schematic of a dry cell is shown in Figure 16.2 “Dry Cells”. The zinc case and the central carbon rod serve as the anode and cathode, respectively. The other reactants are combined into a moist paste that minimizes free liquid, so the battery is less messy (hence the name dry cell). The actual redox reaction is complex but can be represented by the following redox reaction:

Zn + 2 MnO2 + 2 NH4+ → Zn2+ + Mn2O3 + 2 NH3 + H2O

A dry cell has a voltage of about 1.56 V. While common and useful, dry cells have relatively short lifetimes and contain acidic components. They also cannot be recharged, so they are one-use only. Batteries that can be used only once are called primary batteries.

In the late 1950s, Lewis Urry of the Eveready Battery Company in Ohio invented the alkaline battery (still marketed today under the trade name Energizer). Alkaline batteries are similar to dry cells, but they use a basic moist paste rather than an acidic one. Moreover, the net amount of base does not change during the course of the redox reaction. The overall redox reaction is as follows:

Zn + 2MnO2 → ZnO + Mn2O3

Alkaline batteries have the advantage of being longer lasting and holding their voltage better—about 1.54 V—throughout their lifetime.

A common type of battery, especially with the increased popularity of personal electronic devices, is the button battery (Figure 16.3 “Button Batteries”). A button battery is a small battery that can power small electronic devices; the batteries can be as small as 5 mm across. Two popular redox reactions used for button batteries are the alkaline dry-cell reaction and a silver oxide-based reaction:

Zn + Ag2O → ZnO + 2 Ag

Some button batteries use a lithium-based redox reaction, typified by this anode reaction:

Li → Li+ + e−E1/2 = 3.045 V

The actual redox reaction depends on the composition of the cathode and is variable depending on voltage. Lithium batteries can also be used for applications that require more energy, such as portable computers and electric vehicles. Some lithium-based batteries are rechargeable and can be used over and over again; such batteries are called secondary batteries.

Button Batteries. Button batteries like those seen here can be used for a variety of portable electronics, from watches and hearing aids to handheld gaming devices.

Source: “Coin Cells” by Gerhard H Wrodnigg is licensed under the Creative Commons Attribution-Share Alike 2.5 Generic license.

An important secondary battery is the lead storage battery. The lead storage battery is based on this redox reaction:

Pb + PbO2 + 4 H+ + SO42− → 2 PbSO4 + 2 H2O

The redox reaction produces about 2 V, but it is typical to tie several individual batteries together to generate a larger voltage. The lead storage battery has the distinction that the product of both half reactions is PbSO4, which as a solid accumulates on the many plates within each cell. The lead storage battery is a secondary battery, as it can be recharged and reused many times. Because it is based on lead, these batteries are rather heavy. They should also be recycled when replaced so that potentially dangerous lead does not escape into the environment. Because of their characteristics, lead storage batteries are used to start large engines in automobiles, boats, and airplanes.

Chemistry Is Everywhere: Fuel Cells

A fuel cell is a type of battery in which reactants flow continuously into a specialized reaction chamber, and products flow out continuously while electrons are extracted from the reaction. Because all reactions in a fuel cell consist of a fuel and an oxidizer undergoing a redox reaction, an introduction of fuel cells is at home in a discussion of redox chemistry. This fuel cell uses H2 as the fuel and O2 as the oxidizer.

By far the most common fuel cell reaction is based on hydrogen and oxygen:

2 H2 + O2 → 2 H2O E = 1.23 V under standard conditions

However, fuel cells typically do not work under standard nor even optimal conditions, so they typically generate about 0.6–0.7 V. In this fuel cell, the only two products are water and electricity, so the fuel cell not only does not create pollution but also makes a by-product that in some environments is a valuable commodity (water). Other fuels can be used besides hydrogen; fuel cells have been developed that work on methane, methyl alcohol, ethyl alcohol, carbon-rich materials, and even magnesium metal.

Hydrogen-based fuel cells were and are used to provide electricity for manned space vehicles, partly because their only chemical product is water, which could be used for drinking. However, there has been a recent resurgence in interest in fuel cells because of their potential use in electric cars. Most electric cars run on conventional batteries, which can be very heavy and expensive to replace. It is thought that fuel cells, rather than conventional batteries, might be better sources of electricity for automobiles.

Several current barriers to fuel cell use in electric cars include capacity, cost, and overall energy efficiency. The 2008 Honda FCX, the first production model of a vehicle powered with a fuel cell, can hold 4.1 kg (just under 9 lb) of highly pressured H2 gas and has a range of 450 km (280 mi). It costs about $120,000–$140,000 to build, making the vehicle beyond the ability of most people to own. Finally, it always requires more energy to produce elemental hydrogen as a fuel than can be extracted from hydrogen as a fuel. As such, hydrogen is described as an energy carrier (like electricity) rather than an energy source (like oil and gas). This distinction points out a fundamental argument against fuel cells as a “better” power source.The limitations notwithstanding, there is a lot of interest in fuel cell research. If ways can be found to circumvent their current limitations, fuel cells may become more and more common as power sources.

Key Takeaways

A voltaic cell produces electricity as a redox reaction occurs.

The voltage of a voltaic cell can be determined by the reduction potentials of the half reactions.

Voltaic cells are fashioned into batteries, which are a convenient source of electricity.

Exercises

Draw the voltaic cell represented by this reaction and label the cathode, the anode, the salt bridge, the oxidation half cell, the reduction half cell, the positive electrode, and the negative electrode. Use Figure 16.1 “A Redox Reaction in Which the Two Half Reactions Are Physically Separated” as a guide.

Zn + 2 Ag+ → Zn2+ + 2 Ag

Draw the voltaic cell represented by this reaction and label the cathode, the anode, the salt bridge, the oxidation half cell, the reduction half cell, the positive electrode, and the negative electrode. Use Figure 16.1 “A Redox Reaction in Which the Two Half Reactions Are Physically Separated” as a guide.

3 Mg + 2 Cr3+ → 3 Mg2+ + 2 Cr

What is the voltage of this half reaction?

2F− → F2 + 2e−

What is the voltage of this half reaction?

Na → Na+ + e−

What is the voltage of the voltaic cell in Exercise 1? Consult Table 16.1 “Standard Reduction Potentials of Half Reactions” for data.

What is the voltage of the voltaic cell in Exercise 2? Consult Table 16.1 “Standard Reduction Potentials of Half Reactions” for data.

Balance this redox reaction and determine its voltage. Is it spontaneous?

Li+ + Al → Li + Al3+

Balance this redox reaction and determine its voltage. Is it spontaneous?

Pb2+ + Ni → Pb + Ni2+

Balance this redox reaction and determine its voltage. Is it spontaneous?

Cu2+ + Ag + Cl− → Cu + AgCl

Balance this redox reaction and determine its voltage. Is it spontaneous?

Mn2+ + Br2 → MnO4− + Br−

Which reaction represents the cathode reaction in Exercise 7? The anode reaction?

Which reaction represents the cathode reaction in Exercise 8? The anode reaction?

Which reaction represents the cathode reaction in Exercise 9? The anode reaction?

Which reaction represents the cathode reaction in Exercise 10? The anode reaction?

A voltaic cell is based on this reaction:

Ni + 2 Au+ → Ni2+ + 2 Au

If the voltage of the cell is 0.33 V, what is the standard reduction potential of the Au+ + e− → Au half reaction?

A voltaic cell is based on this reaction:

3 Pb + 2 V3+ → 3 Pb2+ + 2 V

If the voltage of the cell is −0.72 V, what is the standard reduction potential of the V3+ + 3e− → V half reaction?

What species is being oxidized and what species is being reduced in a dry cell?

What species is being oxidized and what species is being reduced in an alkaline battery?

What species is being oxidized and what species is being reduced in a silver oxide button battery?

What species is being oxidized and what species is being reduced in a lead storage battery?

Based on the data in Table 16.1 “Standard Reduction Potentials of Half Reactions”, what is the highest voltage battery you can construct?

Based on the data in Table 16.1 “Standard Reduction Potentials of Half Reactions”, what is the lowest voltage battery you can construct? (This may be more challenging to answer than Exercise 21.)

Answers

1.

3.

−2.87 V

5.

1.56 V

7.

3 Li+ + Al → 3 Li + Al3+; −1.39 V; not spontaneous

9.

Cu2+ + 2 Ag + 2 Cl− → Cu + 2 AgCl; 0.12 V; spontaneous

11.

cathode reaction: Li+ + e− → Li; anode reaction: Al → Al3+ + 3e−

13.

cathode reaction: Cu2+ + 2e− → Cu; anode reaction: Ag + Cl− → AgCl + e−

15.

0.08 V

17.

oxidized: Zn; reduced: Mn

19.

oxidized: Zn; reduced: Ag

21.

5.92 V from the reaction of F2 and Li

Chapter 118

16.4 Electrolysis

Learning Objectives

Describe electrolysis from a perspective of redox reactions.

Give examples of electrolysis applications.

Up to this point, we have considered redox reactions for processes that are spontaneous. When set up as a voltaic cell or battery, such reactions can be used as a source of electricity. However, it is possible to go in the other direction. By forcing electricity into a cell, we can make a redox reaction occur that normally would not be spontaneous. Under these circumstances, the cell is called an electrolytic cell, and the process that occurs in the cell is called electrolysis (Figure 16.5 “Electrolysis”)

Figure 16.5 Electrolysis. In an electrolytic cell, electricity is forced through the cell to induce a nonspontaneous redox reaction. Here, the redox reaction 2 H

O → 2 H

+ O

is being caused by the introduction of electricity, which is supplied by the battery.

Electrolysis has many applications. For example, if NaCl is melted at about 800°C in an electrolytic cell and an electric current is passed through it, elemental sodium will appear at the cathode and elemental chlorine will appear at the anode as the following two reactions occur:

Na+ + e− → Na
2 Cl− → Cl2 + 2e−

Normally we expect elemental sodium and chlorine to react spontaneously to make NaCl. However, by using an input of electricity, we can force the opposite reaction to occur and generate the elements. Lithium, potassium, and magnesium can also be isolated from compounds by electrolysis.

Another element that is isolated by electrolysis is aluminum. Aluminum formerly was a difficult metal to isolate in its elemental form; in fact, the top of the Washington Monument has a 2.8 kg cap of aluminum metal, which at the time—1884—was the largest piece of elemental aluminum ever isolated. However, in 1886 the American Charles Hall and the Frenchman Paul Héroult almost simultaneously worked out an electrolytic process for isolating aluminum from bauxite, an ore of aluminum whose chemical formula is AlOx(OH)3 − 2x. The basic reactions are as follows:

Al3+ + 3e− → Al
2 O2− → O2 + 4e−

With the development of the Hall-Héroult process, the price of aluminum dropped by a factor of over 200, and aluminum metal became common. So much elemental aluminum is produced in the United States each year that it has been estimated that the electrolysis of aluminum uses 5% of all the electricity in the country. (Recycling aluminum requires about 1/70th the energy of refining aluminum from ore, which illustrates the tremendous energy savings that recycling provides.)

Another application of electrolysis is electroplating, which is the deposition of a thin layer of metal on an object for protective or decorative purposes (Figure 16.6). Essentially, a metal object is connected to the cathode of an electrolytic cell and immersed in a solution of a particular metal cation. When the electrolytic cell is operated, a thin coating of the metal cation is reduced to the elemental metal on the surface of the object; the thickness of the coating can be as little as a few micrometers (10−6 m). Jewelry, eating utensils, electrical contacts, and car parts like bumpers are common items that are electroplated. Gold, silver, nickel, copper, and chromium are common metals used in electroplating.

Key Takeaways

Electrolysis is the forcing of a nonspontaneous redox reaction to occur by the introduction of electricity into a cell from an outside source.

Electrolysis is used to isolate elements and electroplate objects.

Exercises

Define electrolytic cell.

How does the operation of an electrolytic cell differ from a voltaic cell?

List at least three elements that are produced by electrolysis.

Write the half reactions for the electrolysis of the elements listed in Exercise 3.

Based on Table 16.1 “Standard Reduction Potentials of Half Reactions”, what voltage must be applied to an electrolytic cell to electroplate copper from Cu2+?

Based on Table 16.1 “Standard Reduction Potentials of Half Reactions”, what voltage must be applied to an electrolytic cell to electroplate aluminum from Al3+?

Answers

1.

an electrochemical cell in which charge is forced through and a nonspontaneous reaction occurs

3.

any three of the following: Al, K, Li, Na, Cl2, or Mg

5.

0.34 V

Chapter 119

16.5 End-of-Chapter Material

Additional Exercises

Oxidation was once defined as chemically adding oxygen to a substance. Use this reaction to argue that this definition is consistent with the modern definition of oxidation.

2 Mg + O2 → 2 MgO

Reduction was once defined as chemically adding hydrogen to a substance. Use this reaction to argue that this definition is consistent with the modern definition of reduction.

C2H2 + 2 H2 → C2H6

Assign oxidation numbers to the atoms in each substance.

a) Kr (krypton)

b) krypton tetrafluoride (KrF4)

c) dioxygen difluoride (O2F2)

4. Assign oxidation numbers to the atoms in each substance.

a) lithium hydride (LiH)

b) potassium peroxide (K2O2)

c) potassium fluoride (KF)

5. N atoms can have a wide range of oxidation numbers. Assign oxidation numbers for the N atom in each compound, all of which are known compounds.

a) N2O5

b) N2O4

c) NO2

d) NO

e) N2H4

f) NH3

6. Cr atoms can have a wide range of oxidation numbers. Assign oxidation numbers for the Cr atom in each compound, all of which are known compounds.

a) Na2CrO4

b) Na2Cr2O7

c) CrF5

d) CrCl3

e) CrCl2

7. Balance this redox reaction by inspection.

S8 + O2 → SO2

8. Balance this redox reaction by inspection.

C18H38 + O2 → CO2 + H2O

9. Balance this redox reaction by the half reaction method by assuming an acidic solution.

Cr2O72− + Fe → Cr3+ + Fe3+

10. Balance the redox reaction in Exercise 9 by the half reaction method by assuming a basic solution.

11. The uranyl ion (UO22+) is a fairly stable ion of uranium that requires strong reducers to reduce the oxidation number of uranium further. Balance this redox reaction using the half reaction method by assuming an acidic solution.

UO22+ + HN3 → U + N2

12. Balance the redox reaction in Exercise 11 by the half reaction method by assuming a basic solution.

13. Zinc metal can be dissolved by acid, which contains H+ ions. Demonstrate that this is consistent with the fact that this reaction has a spontaneous voltage:

Zn + 2 H+ → Zn2+ + H2

14. Copper metal cannot be dissolved by acid, which contains H+ ions. Demonstrate that this is consistent with the fact that this reaction has a nonspontaneous voltage:

Cu + 2 H+ → Cu2+ + H2

15. A disproportionation reaction occurs when a single reactant is both oxidized and reduced. Balance and determine the voltage of this disproportionation reaction. Use the data in Table 16.1 “Standard Reduction Potentials of Half Reactions”.

Cr2+ → Cr + Cr3+

16. A disproportionation reaction occurs when a single reactant is both oxidized and reduced. Balance and determine the voltage of this disproportionation reaction. Use the data in Table 16.1 “Standard Reduction Potentials of Half Reactions”.

Fe2+ → Fe + Fe3+

17. What would be overall reaction for a fuel cell that uses CH4 as the fuel?

18. What would be overall reaction for a fuel cell that uses gasoline (general formula C8H18) as the fuel?

19. When NaCl undergoes electrolysis, sodium appears at the cathode. Is the definition of cathode the same for an electrolytic cell as it is for a voltaic cell?

20. When NaCl undergoes electrolysis, chlorine appears at the anode. Is the definition of anode the same for an electrolytic cell as it is for a voltaic cell?

21. An award is being plated with pure gold before it is presented to a recipient. If the area of the award is 55.0 cm2 and will be plated with 3.00 µm of Au, what mass of Au will be plated on the award? The density of Au is 19.3 g/cm3.

22. The unit of electrical charge is called the coulomb (C). It takes 96,500 coulombs of charge to reduce 27.0 g of Al from Al3+ to Al metal. At 1,040 cm3, how many coulombs of charge were needed to reduce the aluminum in the cap of the Washington monument, assuming the cap is pure Al? The density of Al is 2.70 g/cm3.

Answers

1.

As oxygen is added to magnesium, it is being oxidized. In modern terms, the Mg atoms are losing electrons and being oxidized, while the electrons are going to the O atoms.

3.

a) Kr: 0

b) Kr: +4; F: −1

c) O: +1; F: −1

5.

a) +5

b) +4

c) +4

d) +2

e) −2

f) −3

7.

S8 + 8 O2 → 8 SO2

9.

14 H+ + Cr2O72− + 2 Fe → 2 Cr3+ + 7 H2O + 2 Fe3+

11.

6 HN3 + UO22+ → U + 2 H2O + 9 N2 + 2 H+

13.

The voltage of the reaction is +0.76 V, which implies a spontaneous reaction.

15.

3 Cr2+ → Cr + 2 Cr3+; −0.50 V

17.

CH4 + 2 O2 → CO2 + 2 H2O

19.

yes because reduction occurs at the cathode

21.

0.318 g

PART XII

Unit 12 Organic Chemistry

Chapter 120

Chapter 17. Organic Chemistry

Introduction to Organic Chemistry

All life on earth is ultimately based on photosynthesis—the process by which plants absorb CO2 and H2O from their environment and, in the presence of sunlight, convert those substances into a simple sugar (glucose) and ultimately into starches and other building blocks of life. The net photosynthesis chemical reaction is as follows:

Oxygen is also a product of photosynthesis. Most forms of animal life (including people) depend on oxygen to breathe, which makes plants indispensible. Virtually all food sources come from plants, eaten either directly (as fruits, vegetables, or grains) or indirectly (as meat from animals that eat plants such as cattle, poultry, pigs, sheep, and goats). Plants are absolutely necessary for life to exist.

The net reaction for photosynthesis is misleadingly simple. A series of reactions, called light-dependent reactions, start by the absorption of light by pigments (not just chlorophyll, as commonly misunderstood) in plant cells. This is followed by a series of light-independent reactions, so named not because they happen in the dark but because they do not directly involve light. However, they involve the products of reactions stimulated by light, so they ultimately depend on light. The whole series of reactions involves many chemicals and enzymes, the breaking and making of chemical bonds, the transfer of electrons and H+ ions, and other chemical processes. The elucidation of the actual steps of photosynthesis—a process still unduplicated artificially—is a major achievement of modern chemistry.

Figure 17.1 In the presence of the sun, plants perform photosynthesis, the chemical reactions that convert CO

and H

O to glucose. The reaction also produces O

, which is necessary for animal life. Virtually all life on earth depends on photosynthesis.

Source: “Mustard Fields” by Prasad Kholkute is licensed under the Creative Commons Attribution-ShareAlike 2.0 Generic

Organic chemistry is the study of the chemistry of carbon compounds. Why focus on carbon? Carbon has properties that give its chemistry unparalleled complexity. It forms four covalent bonds, which give it great flexibility in bonding. It makes fairly strong bonds with itself (a characteristic called catenation), allowing for the formation of large molecules; it also forms fairly strong bonds with other elements, allowing for the possibility of a wide variety of substances. No other element demonstrates the versatility of carbon when it comes to making compounds. So an entire field of chemistry is devoted to the study of the compounds and reactivity of one element.

Because of the potential for complexity, chemists have defined a rather rigorous system to describe the chemistry of carbon. We will introduce some of that system in this chapter. Should you continue your study of chemistry beyond this text, you will find a much larger world of organic chemistry than we can cover in a single chapter.

Chapter 121

17.1 Hydrocarbons

Learning Objectives

Identify alkanes, alkenes, alkynes, and aromatic compounds.

List some properties of hydrocarbons.

The simplest organic compounds are those composed of only two elements: carbon and hydrogen. These compounds are called hydrocarbons. Hydrocarbons themselves are separated into two types: aliphatic hydrocarbons and aromatic hydrocarbons. Aliphatic hydrocarbons are hydrocarbons based on chains of C atoms. There are three types of aliphatic hydrocarbons. Alkanes are aliphatic hydrocarbons with only single covalent bonds. Alkenes are aliphatic hydrocarbons that contain at least one C–C double bond, and alkynes are aliphatic hydrocarbons that contain a C–C triple bond. Occasionally, we find an aliphatic hydrocarbon with a ring of C atoms; these hydrocarbons are called cycloalkanes (or cycloalkenes or cycloalkynes).

Aromatic hydrocarbons, such as benzene,are flat-ring systems that contain continuously overlapping p orbitals.Electrons in the benzene ring have special energetic properties that give benzene physical and chemical properties that are markedly different from alkanes. Originally, the term aromatic was used to describe this class of compounds because they were particularly fragrant. However, in modern chemistry the term aromatic denotes the presence of a very stable ring that imparts different and unique properties to a molecule.

The simplest alkanes have their C atoms bonded in a straight chain; these are called normal alkanes. They are named according to the number of C atoms in the chain. The smallest alkane is methane:

To make four covalent bonds, the C atom bonds to four H atoms, making the molecular formula for methane CH4. The two-dimensional diagram for methane is misleading, however; the four covalent bonds that the C atom makes are oriented three-dimensionally toward the corners of a tetrahedron. A better representation of the methane molecule is shown in Figure 17.1 “Three-Dimensional Representation of Methane.”

The next-largest alkane has two C atoms that are covalently bonded to each other. For each C atom to make four covalent bonds, each C atom must be bonded to three H atoms. The resulting molecule, whose formula is C2H6, is ethane:

Propane has a backbone of three C atoms surrounded by H atoms. You should be able to verify that the molecular formula for propane is C3H8:

The diagrams we have seen so far representing alkanes are fairly simiple Lewis structures. However, as molecules get larger, the Lewis structures become more and more complex. One way around this is to use a condensed structure,which lists the formula of each C atom in the backbone of the molecule. For example, the condensed structure for ethane is CH3CH3, while it is CH3CH2CH3 for propane. Table 17.1 “The First 10 Alkanes” gives the molecular formulas, the condensed structural formulas, and the names of the first 10 alkanes.

Table 17.1 The First 10 Alkanes

Molecular Formula	Condensed Structural Formula	Name
CH 4	CH 4	methane
C 2 H 6	CH 3 CH 3	ethane
C 3 H 8	CH 3 CH 2 CH 3	propane
C 4 H 10	CH 3 CH 2 CH 2 CH 3	butane
C 5 H 12	CH 3 CH 2 CH 2 CH 2 CH 3	pentane
C 6 H 14	CH 3 (CH 2 ) 4 CH 3	hexane
C 7 H 16	CH 3 (CH 2 ) 5 CH 3	heptane
C 8 H 18	CH 3 (CH 2 ) 6 CH 3	octane
C 9 H 20	CH 3 (CH 2 ) 7 CH 3	nonane
C 10 H 22	CH 3 (CH 2 ) 8 CH 3	decane

Because alkanes have the maximum number of H atoms possible according to the rules of covalent bonds, alkanes are also referred to as saturated hydrocarbons.

Alkenes have a C–C double bond. Because they have less than the maximum number of H atoms possible, they are called unsaturated hydrocarbons. The smallest alkene—ethene—has two C atoms and is also known by its common name, ethylene:

The next largest alkene—propene—has three C atoms with a C–C double bond between two of the C atoms. It is also known as propylene:

What do you notice about the names of alkanes and alkenes? The names of alkenes are the same as their corresponding alkanes except that the suffix (ending) is –ene, rather than –ane. Using a stem known as the parent chain to indicate the number of C atoms in a molecule and an ending to represent the type of organic compound is common in organic chemistry, as we shall see.

With the introduction of the next alkene, butene, we begin to see a major issue with organic molecules: choices. With four C atoms, the C–C double bond can go between the first and second C atoms or between the second and third C atoms:

(A double bond between the third and fourth C atoms is the same as having it between the first and second C atoms, only flipped over.) The rules of naming in organic chemistry require that these two substances have different names. The first molecule is named but-1-ene, while the second molecule is named but-2-ene. The number between the parent-chain name and suffix is known as a locant, and indicates on which carbon the double bond originates. The lowest possible number is used to number a feature in a molecule; hence, calling the second molecule but-3-ene would be incorrect. Numbers are common parts of organic chemical names because they indicate which C atom in a chain contains a distinguishing feature. When the double bond (or other functional group) is located on the first carbon, it is common practice for some authors to leave out the locant. For example, if butene were written without a locant, you should assume it refers to but-1-ene, not but-2-ene.

The compounds but-1-ene and but-2-ene have different physical and chemical properties, even though they have the same molecular formula—C4H8. Different molecules with the same molecular formula are called isomers. Isomers are common in organic chemistry and contribute to its complexity.

Example 1 Based on the names for the butene molecules, propose a name for this molecule. Solution With five C atoms, we will use the pent– parent name, and with a C–C double bond, this is an alkene, so this molecule is a pentene. In numbering the C atoms, we use the number 2 because it is the lower possible label. So this molecule is named pent-2-ene. Test Yourself Based on the names for the butene molecules, propose a name for this molecule. Answer hex-3-ene

Alkynes, with a C–C triple bond, are named similarly to alkenes except their names end in –yne. The smallest alkyne is ethyne, which is also known as acetylene:

Propyne has this structure:

With butyne, we need to start numbering the position of the triple bond, just as we did with alkenes:

Benzene is an aromatic compound composed of six C atoms in a ring, with alternating single and double C–C bonds:

The alternating single and double C–C bonds give the benzene ring a special stability, and it does not react like an alkene as might be expected.

As fundamental as hydrocarbons are to organic chemistry, their properties and chemical reactions are rather mundane. Most hydrocarbons are nonpolar because of the close electronegativities of C and H atoms. As such, they dissolve only sparingly in H2O and other polar solvents. Small hydrocarbons, such as methane and ethane, are gases at room temperature, while larger hydrocarbons, such as hexane and octane, are liquids. Even larger hydrocarbons, like hentriacontane (C31H64), are solids at room temperature and have a soft, waxy consistency.

Hydrocarbons are rather unreactive, but they do participate in some classic chemical reactions. One common reaction is substitution with a halogen atom by combining a hydrocarbon with an elemental halogen. Light is sometimes used to promote the reaction, such as this one between methane and chlorine:

Halogens can also react with alkenes and alkynes, but the reaction is different. In these cases, the halogen molecules react with the C–C double or triple bond and attach onto each C atom involved in the multiple bonds. This reaction is called an addition reaction. One example is

The reaction conditions are usually mild; in many cases, the halogen reacts spontaneously with an alkene or an alkyne.

Hydrogen can also be added across a multiple bond; this reaction is called a hydrogenation reaction. In this case, however, the reaction conditions may not be mild; high pressures of H2 gas may be necessary. A platinum or palladium catalyst is usually employed to get the reaction to proceed at a reasonable pace:

By far the most common reaction of hydrocarbons is combustion, which is the combination of a hydrocarbon with O2 to make CO2 and H2O. The combustion of hydrocarbons is accompanied by a release of energy and is a primary source of energy production in our society (Figure 17.2 “Combustion”). The combustion reaction for gasoline, for example, which can be represented by C8H18, is as follows:

2 C8H18 + 25 O2 → 16 CO2 + 18 H2O + ~5060 kJ

Combustion. The combustion of hydrocarbons is a primary source of energy in our society. First gas from the Oselvar module on the Ula platform in Norway on April 14, 2012, by Varodrig under a CC BY SA license.

Key Takeaways

The simplest organic compounds are hydrocarbons, which are composed of carbon and hydrogen.

Hydrocarbons can be aliphatic or aromatic; aliphatic hydrocarbons are divided into alkanes, alkenes, and alkynes.

The combustion of hydrocarbons is a primary source of energy for our society.

Exercises Define hydrocarbon. What are the two general types of hydrocarbons? 2. What are the three different types of aliphatic hydrocarbons? How are they defined? 3. Indicate whether each molecule is an aliphatic or an aromatic hydrocarbon. If it is aliphatic, identify the molecule as an alkane, an alkene, or an alkyne. a) b) c) 4. Indicate whether each molecule is an aliphatic or an aromatic hydrocarbon. If it is aliphatic, identify the molecule as an alkane, an alkene, or an alkyne. a) b) c) 5. Indicate whether each molecule is an aliphatic or an aromatic hydrocarbon. If it is aliphatic, identify the molecule as an alkane, an alkene, or an alkyne. a) b) c) 6. Indicate whether each molecule is an aliphatic or an aromatic hydrocarbon. If it is aliphatic, identify the molecule as an alkane, an alkene, or an alkyne. a) b) c) 7. Name and draw the structural formulas for the four smallest alkanes. 8. Name and draw the structural formulas for the four smallest alkenes. 9. What does the term aromatic imply about an organic molecule? 10. What does the term normal imply when used for alkanes? 11. Explain why you may see prop-1-ene written just as propene. 12. Explain why the name but-3-ene is incorrect. What is the proper name for this molecule? 13. Name and draw the structural formula of each isomer of pentene. 14. Name and draw the structural formula of each isomer of hexyne. 15. Write a chemical equation for the reaction between methane and bromine. 16. Write a chemical equation for the reaction between ethane and chlorine. 17. Draw the structure of the product of the reaction of bromine with propene. 18. Draw the structure of the product of the reaction of chlorine with but-2-ene. 19. Draw the structure of the product of the reaction of hydrogen with but-1-ene. 20. Draw the structure of the product of the reaction of hydrogen with pent-2-ene. 21. Write the balanced chemical equation for the combustion of heptane. 22. Write the balanced chemical equation for the combustion of nonane. Answers 1. an organic compound composed of only carbon and hydrogen; aliphatic hydrocarbons and aromatic hydrocarbons 3. a) aliphatic; alkane b) aromatic c) aliphatic; alkene 5. a) aliphatic; alkane b) aliphatic; alkene c) aromatic 7. 9. Aromatic means the molecule has a flat ring system with continuous p orbitals (e.g., benzene). 11. The 1 is not necessary since the double bond is on the first carbon. 13. 15. CH4 + Br2 → CH3Br + HBr 17. 19. 21. C7H16 + 11 O2 → 7 CO2 + 8 H2O

Chapter 122

17.2 Branched Hydrocarbons

Learning Objectives

Name a branched hydrocarbon from its structure.

Draw the structural formula of a branched hydrocarbon from its name.

Not all hydrocarbons are straight chains. Many hydrocarbons have branches of C atoms attached to a chain; they are called branched hydrocarbons. These branched alkanes are isomers of straight-chain alkanes having the same number of C atoms. However, they are different compounds with different physical and chemical properties. As such, they need different names. How do we name branched hydrocarbons?

There are a series of rules for naming branched alkanes (and, ultimately, for all organic compounds). These rules make up the system of nomenclature for naming organic molecules. Worldwide, the International Union of Pure and Applied Chemistry (IUPAC) has developed the system of nomenclature for organic compounds, so these rules are sometimes called the IUPAC rules of nomenclature. By learning and applying these rules, you can name any organic compound when given its structure or determine the unique structure of a molecule from its name. You have already learned the basics of nomenclature—the names of the first 10 normal hydrocarbons. Here, we will add some steps to the procedure so you can name branched hydrocarbons.

First, given the structure of an alkane, identify the longest continuous chain of C atoms; this is known as the parent chain. Note that the longest chain may not be drawn in a straight line. The longest chain determines the parent name of the hydrocarbon. For example, in the molecule shown below, the longest chain of carbons has six C atoms. Therefore, it will be named as a hexane.

However, in this molecule, the longest chain of C atoms is not six, but seven, as shown. So this molecule will be named as a heptane.

The next step is to identify the branches, or substituents, on the main chain. The names of the substituents, or alkyl groups, are derived from the names of the parent hydrocarbons; however, rather than having the ending –ane, the substituent name has the ending –yl (Table 17.2 “Substituent Names for the Five Smallest Substituents.”).

Table 17.2 Substituent Names for the Five Smallest Substituents

Substituent Formula	Number of C Atoms	Name of Substituent
CH 3	1	methyl –
CH 3 CH 2	2	ethyl –
CH 3 CH 2 CH 2	3	propyl –
CH 3 CH 2 CH 2 CH 2	4	butyl –
CH 3 CH 2 CH 2 CH 2 CH 2	5	pentyl –
and so forth	and so forth	and so forth

To name a branched hydrocarbon, the name of the substituent is combined with the parent name of the hydrocarbon without spaces. However, there is likely one more step. The longest chain of the hydrocarbon must be numbered, and the locant (numerical position of the substituent) must be included to account for possible isomers. As with double and triple bonds, the main chain is numbered to give the substituent the lowest possible number. For example, in the alkane shown here, the longest chain is five C atoms long, so it is a pentane.

There is a one-carbon substituent on the third C atom, so there is a methyl group at position 3. We indicate the position using the number, which is followed by a hyphen, the substituent name, and the parent hydrocarbon name—in this case, 3-methylpentane. That name is specific to that particular hydrocarbon and no other molecule. Organic chemistry nomenclature is very specific following the general format shown in Figure 17.3 “IUPAC Nomenclature Guide.”

It is common to represent organic molecules using bond-line structures, where hydrogens are omitted for clarity, and carbons are represented by a corner or “kink” in the line. For example, 3-methylpentane can be written as:

It is understood that any unwritten covalent bonds are bonds with H atoms. With this understanding, we recognize that the structural formula for 3-methylpentane refers to a molecule with the formula C6H14.

Example 2 Name this molecule. Solution The longest continuous carbon chain has seven C atoms, so this molecule is named as a heptane. There is a two-carbon substituent on the main chain, which is an ethyl group. To give the substituent the lowest numbering, we number the chain from the right side and see that the substituent is on the third C atom. So this hydrocarbon is 3-ethylheptane. Test Yourself Name this molecule. Answer 2-methylpentane

Branched hydrocarbons may have more than one substituent. If the substituents are different, give each substituent a number (using the smallest possible numbers) and list the substituents in alphabetical order, with the numbers separated by hyphens and no spaces in the name. So the molecule shown here is 3-ethyl-2-methylpentane.

If the substituents are the same, use the name of the substituent only once, but use more than one number, separated by a comma. Also, put a numerical prefix before the substituent name that indicates the number of substituents of that type. The numerical prefixes are listed in Table 17.3 “Numerical Prefixes to Use for Multiple Substituents.” The number of the position values must agree with the numerical prefix before the substituent.

Table 17.3 Numerical Prefixes to Use for Multiple Substituents

Number of Same Substituent	Numerical Prefix
2	di –
3	tri-
4	tetra –
5	penta –
and so forth	and so forth

Consider this molecule:

The longest chain has four C atoms, so it is a butane. There are two substituents, each of which consists of a single C atom; they are methyl groups. The methyl groups are on the second and third C atoms in the chain (no matter which end the numbering starts from), so we would name this molecule 2,3-dimethylbutane. Note the comma between the numbers, the hyphen between the numbers and the substituent name, and the presence of the prefix di– before the methyl. Other molecules—even with larger numbers of substituents—can be named similarly.

Example 3 Name this molecule. Solution The longest chain has seven C atoms, so we name this molecule as a heptane. We find two one-carbon substituents on the second C atom and a two-carbon substituent on the third C atom. So this molecule is named 3-ethyl-2,2-dimethylheptane. Test Yourself Name this molecule. Answer 4,4,5-tripropyloctane

Alkenes and alkynes are named in a similar fashion. The biggest difference is that when identifying the longest carbon chain, it must contain the C–C double or triple bond. Furthermore, when numbering the main chain, the double or triple bond gets the lowest possible number. This means that there may be longer or higher-numbered substituents than would be allowed if the molecule were an alkane. For example, this molecule is 2,4-dimethylhept-3-ene (note the number and the hyphens that indicate the position of the double bond).

Example 4 Name this molecule. Solution The longest chain that contains the C–C triple bond has six C atoms, so this is a hexyne molecule. The triple bond starts at the third C atom, so this is a hex-3-yne. Finally, there are two methyl groups on the chain; to give them the lowest possible number, we number the chain from the left side, giving the methyl groups the second position. So the name of this molecule is 2,2-dimethylhex-3-yne. Test Yourself Name this molecule. Answer 2,3,4-trimethylpent-2-ene

Once you master naming hydrocarbons from their given structures, it is rather easy to draw a structure from a given name. Just draw the parent chain with the correct number of C atoms (putting the double or triple bond in the right position, as necessary) and add the substituents in the proper positions. If you start by drawing the C atom backbone, you can go back and complete the structure by adding H atoms to give each C atom four covalent bonds. From the name 2,3-dimethyl-4-propylhept-2-ene, we start by drawing the seven-carbon parent chain with a double bond starting at the third carbon:

We add to this structure two one-carbon substituents on the second and third C atoms:

We finish the carbon backbone by adding a three-carbon propyl group to the fourth C atom in the parent chain:

If we so choose, we can add H atoms to each C atom to give each carbon four covalent bonds, being careful to note that the C atoms in the double bond already have an additional covalent bond. (How many H atoms do you think are required? 2 There will need to be 24 H atoms to complete the molecule. )

Example 5 Draw the carbon backbone for 2,3,4-trimethylpentane. Solution First, we draw the five-carbon backbone that represents the pentane chain: According to the name, there are three one-carbon methyl groups attached to the second, third, and fourth C atoms in the chain. We finish the carbon backbone by putting the three methyl groups on the pentane main chain: Test Yourself Draw the carbon backbone for 3-ethyl-6,7-dimethyloct-2-ene. Answer

Naming substituted benzene molecules is straightforward. If there is only one substituent, the substituent is named as a side chain on a benzene molecule, like this:

If there are two or more substituents on a benzene molecule, the relative positions must be numbered, just as an aliphatic chain of C atoms is numbered. The substituent that is first alphabetically is assigned position 1, and the ring is numbered in a circle to give the other substituents the lowest possible number(s).

If an aliphatic chain attached to a benzene ring has more carbons, the benzene ring is treated as a substituent and is given the name phenyl-. This molecule is 4-phenylheptane:

Key Takeaways

A unique name can be given to branched hydrocarbons using IUPAC nomenclature rules.

A unique structure can be drawn for the name of a given hydrocarbon.

Bond-line diagrams are commonly used to represent organic molecules and simplify the structure by not showing C-H bonds or carbon atoms.

Exercises

How does a branched hydrocarbon differ from a normal hydrocarbon?

How does a substituent get its unique name?

Name this molecule.

Name this molecule.

Name this molecule.

Name this molecule.

Name this molecule.

Name this molecule.

Name this molecule.

Name this molecule.

Name this molecule.

Name this molecule.

Draw the carbon backbone for each molecule.

a) 3,4-diethyloctane

b) 2,2-dimethyl-4-propylnonane

14. Draw the carbon backbone for each molecule.

a) 3-ethyl-4-methylhept-3-ene

b) 3,3-diethylpent-1-yne

15. Draw the carbon backbone for each molecule.

a) 4-ethyl-4-propyloct-2-yne

b) 5-butyl-2,2-dimethyldecane

16. Draw the carbon backbone for each molecule.

a) 3,4-diethylhexyne

b) 4-propyl-3-ethyl-2-methyloctane

17. The name 2-ethylhexane is incorrect. Draw the carbon backbone and write the correct name for this molecule.

18. The name 3-butyl-7-methyloctane is incorrect. Draw the carbon backbone and write the correct name for this molecule.

Answers

1. A branched hydrocarbon does not have all of its C atoms in a single row.

3. 3-methyl-2-hex-2-ene

5. 4,4-dimethylpent-1-ene

7. 2,4-dimethylpent-2-ene

9. 3,4-diethyloctane

11. 1-bromo-4-chlorobenzene

13.

a)

b)

15.

a)

b)

17.

Chapter 123

17.3 Alkyl Halides and Alcohols

Learning Objectives

Define functional group.

Identify and name a simple alkyl halide.

Identify and name a simple alcohol.

Predict the product(s) of an elimination reaction of an alkyl halide or an alcohol.

A functional group is any collection of atoms and/or bonds with certain characteristic chemical reactions. We have already seen two functional groups: the C–C double bond and the C–C triple bond. They undergo certain characteristic chemical reactions—for example, the addition of a halogen across the multiple bond.

The presence of a halogen atom (F, Cl, Br, or I; X is used to represent any halogen atom) is one of the simplest functional groups. Organic compounds that contain a halogen atom are called alkyl halides. We have already seen some examples of alkyl halides when the addition of halogens across double and triple bonds was introduced in Section 17.2 “Branched Hydrocarbons”; the products of these reactions were alkyl halides.

A simple alkyl halide can be named like an ionic salt, first by stating the name of the parent alkane as a substituent group (with the –yl suffix) and then the name of the halogen as if it were the anion. So CH3Cl has the common name of methyl chloride, while CH3CH2Br is ethyl bromide and CH3CH2CH2I is propyl iodide. However, this system is not ideal for more complicated alkyl halides.

The systematic way of naming alkyl halides is to name the halogen as a substituent, just like an alkyl group, and use numbers to indicate the position of the halogen atom on the main chain. The name of the halogen as a substituent comes from the stem of the element’s name plus the ending –o, so the substituent names are fluoro-, chloro-, bromo-, and iodo-. If there is more than one of a certain halogen, we use numerical prefixes to indicate the number of each kind, just as with alkyl groups. For example, this molecule is 2-bromobutane.

And this molecule is 2,3-dichloropentane.

If alkyl groups are present, the substituents are listed alphabetically. Numerical prefixes are ignored when determining the alphabetical ordering of substituent groups.

Example 6 Name this molecule. Solution The longest carbon chain has five C atoms, so the molecule is a pentane. There are two chlorine substituents located on the second and third C atoms, with a one-carbon methyl group on the third C atom as well. The correct name for this molecule is 2,3-dichloro-3-methylpentane. Test Yourself Name this molecule. Answer 1,1,2-tribromopropane

Another simple functional group is the covalently bonded OH group. This is the alcohol functional group. It is not the hydroxide ion; in organic chemistry, rather than being present as a negatively charged species, it is a covalently bonded functional group.

Like alkyl halides, alcohols have a common naming system and a more formal system. The common system is similar to that of alkyl halides: name the alkyl group attached to the OH group, ending with the suffix –yl, and add the word alcohol as a second word. So CH3OH is methyl alcohol, CH3CH2OH is ethyl alcohol, and CH3CH2CH2OH is propyl alcohol.

As with alkyl halides, though, this system is limited (although for smaller alcohols, it is very common in everyday usage). The formal system of naming uses the name of the hydrocarbon containing the OH group and having the correct number of C atoms, dropping the final –e of the name and appending the suffix –ol. Thus CH3OH is methanol and CH3CH2OH is ethanol. For larger alcohol molecules, we use a number to indicate the position of the OH group on the longest carbon chain, similar to the number needed for alkenes and alkynes. Again, the carbon chain is numbered to give the OH group the lowest number, no matter how large the other numbers are. So CH3CH2CH2OH is propan-1-ol, while CH3CHOHCH3 is propan-2-ol. (A common component in many medicine cabinets, propan-2-ol is also known as isopropanol or isopropyl alcohol [Figure 17.4 “Isopropyl Alcohol”]).

Figure 17.4 Isopropyl Alcohol. What you find labelled

in a medicine cabinet is more formally called propan-2-ol.

Source: Photo courtesy of Craig Spurrier,

.

Another acceptable way of naming an alcohol—especially a more complicated molecule—is to name the OH group as the hydroxy substituent and give it a numerical position like an alkyl group or a halogen atom. Thus propan-2-ol would be called 2-hydroxypropane by this convention.

Example 7 Name this molecule as an alcohol and as a substituted alkane. Solution The longest carbon chain containing the OH group has four C atoms, so the parent hydrocarbon is butane. Because the OH group is on the first C atom, it is butan-1-ol. There is a methyl group on the second C atom, as well as a Cl atom, so the formal name for this alcohol is 2-chloro-2-methylbutan-1-ol. If naming the alcohol group as a substituent, it would be 2-chloro-1-hydroxy-2-methylbutane. Test Yourself Name this molecule as an alcohol and as a substituted alkane. Answer 2,2,2-trichloroethanol

Most alkyl halides are insoluble in H2O. Smaller alcohols, however, are very soluble in H2O because these molecules can engage in hydrogen bonding with H2O molecules. For larger molecules, however, the polar OH group is overwhelmed by the nonpolar alkyl part of the molecule. While methanol is soluble in H2O in all proportions, only about 2.6 g of pentanol will dissolve in 100 g of H2O. Larger alcohols have an even lower solubility in H2O.

One reaction common to alcohols and alkyl halides is the elimination reaction, which is the removal of the functional group (either X or OH) and an H atom from an adjacent carbon. The general reaction can be written this way:

where X can represent either the X or the OH group. The biggest difference between elimination in alkyl halides and elimination in alcohols is the identity of the catalyst: for alkyl halides, the catalyst is a strong base; for alcohols, the catalyst is a strong acid. For compounds in which there are H atoms on more than one adjacent carbon, a mixture of products results.

Example 8 Predict the organic product(s) of this reaction. Solution Under these conditions, an HOH (otherwise known as H2O) molecule is eliminated, and an alkene forms. It does not matter which adjacent carbon loses the H atom; in either case the product will be propene: Test Yourself Predict the organic product(s) of this reaction. Answer but-1-ene and but-2-ene

Key Takeaways

Alkyl halides have a halogen atom as a functional group.

Alcohols have an OH group as a functional group.

Nomenclature rules allow us to name alkyl halides and alcohols.

In an elimination reaction, a double bond is formed as an HX or an HOH molecule is removed.

Exercises

Define functional group and give two examples.

What is elimination? How does it differ for alkyl halides and alcohols?

Name this molecule.

Name this molecule.

Name this molecule.

Name this molecule.

Name this molecule.

Name this molecule.

Name this molecule.

Name this molecule.

Predict the product(s) of this elimination reaction.

Predict the product(s) of this elimination reaction.

Predict the product(s) of this elimination reaction.

Predict the product(s) of this elimination reaction.

Answers

1. a group of atoms with a certain reactivity; halogen atoms and alcohol groups (answers will vary)

3. 2-bromobutane

5. 2-chloro-3-fluoro-4-methylheptane

7. 2-methylpropan-2-ol

9. octan-4-ol

11. pent-2-ene

13. hex-2-ene and hex-3-ene

Chapter 124

17.4 Other Oxygen-Containing Functional Groups

Learning Objective

1. Identify the aldehyde, ketone, acid, ester, and ether functional groups.

2. Use proper naming conventions for aldehyde, ketone, carboxylic acid, and ester- and ether-containing molecules.

There are other functional groups that contain oxygen atoms. A carbonyl group is formed when an O atom and a C atom are joined by a double bond. In this diagram, the R group represents any hydrocarbon chain:

If one bond of the carbonyl group is made to a hydrogen atom, then the molecule is further classified as an aldehyde. When naming aldehydes, the main chain of C atoms must include the carbon in the carbonyl group, which is numbered as position 1 in the carbon chain. The parent name of the hydrocarbon is used, but the suffix –al is appended. (Do not confuse –al with –ol, which is the suffix used for alcohols.) So we have

Methanal has a common name with which you may be familiar: formaldehyde. The main thing to note about aldehydes is that the carbonyl group is at the end of a carbon chain.

A carbonyl group in the middle of a carbon chain implies that both remaining bonds of the carbonyl group are made to C atoms. This type of molecule is called a ketone. Despite the fact that aldehydes and ketones have the same carbonyl group, they have different chemical and physical properties and are properly grouped as two different types of compounds. The smallest ketone has three C atoms in it. When naming a ketone, we take the name of the parent hydrocarbon and change the suffix to –one:

The common name for propanone is acetone. With larger ketones, we must use a locant number to indicate the position of the carbonyl group just before the suffix, as we did with alkenes and alkynes:

There is a non-IUPAC way to name ketones that is commonly used as well: name the alkyl groups that are attached to the carbonyl group and add the word ketone to the name. So propanone can also be called dimethyl ketone, while butan-2-one is called methyl ethyl ketone.

Example 9

Draw the structure of pentan-2-one.

Solution

This molecule has five C atoms in a chain, with the carbonyl group on the second C atom. Its structure is:

Test Yourself

Draw the structure of methyl butyl ketone.

Answer

The combination of a carbonyl functional group and a hydroxyl group makes the carboxyl group.

Molecules with a carboxyl group are called carboxylic acids. As with aldehydes, the functional group in carboxylic acids is at the end of a carbon chain. Also as with aldehydes, the C atom in the functional group is counted as one of the C atoms that defines the parent hydrocarbon name. To name carboxylic acids, the parent name of the hydrocarbon is used, but the suffix –oic acid is added:

Methanoic acid and ethanoic acid are also called formic acid and acetic acid, respectively. Formic acid is the compound that makes certain ant bites sting, while acetic acid is the active substance in vinegar.

How acidic are carboxylic acids? It turns out that they are not very acidic. No carboxylic acid is on the list of strong acids (Table 13.2 “Strong Acids and Bases”). (For more information about strong acids, see Section 13.4 “Strong and Weak Acids and Bases and Their Salts.”) This means that all carboxylic acids are weak acids. A 1 M solution of formic acid is only about 1.3% dissociated into H+ ions and formate ions, while a similar solution of acetic acid is ionized by about only 0.4%. Some carboxylic acids are stronger—for example, trichloroacetic acid is about 45% dissociated in aqueous solution. But no carboxylic acid approaches the 100% dissociation amount required by the definition of a strong acid.

As their name suggests, however, carboxylic acids do act like acids in the presence of bases. The H atom in the carboxyl group comes off as the H+ ion, leaving a carboxylate ion:

Carboxylate ions are named from the acid name: the –oic acid is replaced with –oate to name the ion.

Example 10 Complete the chemical reaction. Can you name the carboxylate ion formed? Solution The OH– ion removes the H atom that is part of the carboxyl group: The carboxylate ion, which has the condensed structural formula CH3CO2−, is the ethanoate ion, but it is commonly called the acetate ion. Test Yourself Complete the chemical reaction. Can you name the carboxylate ion formed? Answer The ion is the methanoate ion, which is commonly called the formate ion.

One reaction to consider is that of a carboxylic acid and an alcohol. When combined under the proper conditions, a water molecule will be removed, and the remaining pieces will combine to form a new functional group—the ester group:

Note how the acid molecule contributes one alkyl side (represented by R), while the alcohol contributes the other side (represented by R′). Esters are named using the alkyl group name from the alcohol plus the carboxylate name from the acid—for example, this molecule is called methyl propanoate.

Chemistry Is Everywhere: Esters, Fragrances, and Flavorings

Esters are very interesting compounds, in part because many have pleasant odours and flavours. (Remember, never taste anything in the chemistry lab!) Many esters occur naturally and contribute to the fragrance of flowers and the taste of fruits. Other esters are synthesized industrially and are added to food products to improve their smell or taste. It is likely that if you eat a product whose ingredients include artificial flavourings, those flavourings are esters. Here are some esters and their uses, thanks to their odours, flavours, or both:

Ester	Tastes/Smells Like	Ester	Tastes/Smells Like
allyl hexanoate	pineapple	isobutyl formate	raspberry
benzyl acetate	pear	isobutyl acetate	pear
butyl butanoate	pineapple	methyl phenylacetate	honey
ethyl butanoate	banana	nonyl caprylate	orange
ethyl hexanoate	pineapple	pentyl acetate	apple
ethyl heptanoate	apricot	propyl ethanoate	pear
ethyl pentanoate	apple	propyl isobutyrate	rum

Finally, the ether functional group is an O atom that is bonded to two organic groups:

R—O—R′

The two R groups may be the same or different. Naming ethers is like the alternate way of naming ketones. In this case, the R groups are named sequentially, and the word ether is appended. The molecule CH3OCH3 is dimethyl ether, while CH3OCH2CH3 is methyl ethyl ether. Diethyl ether, another ether, was once used as an anesthetic, but its flammability and toxicity caused it to fall out of favor. Smaller ether molecules that are liquids at room temperature are common solvents for organic chemical reactions.

Key Takeaways

Aldehydes, ketones, carboxylic acids, esters, and ethers have oxygen-containing functional groups.

IUPAC naming can be used for aldehyde, ketone, carboxylic acid, and ester- and ether-containing molecules.

Exercises

Name a similarity between the functional groups found in aldehydes and ketones. Can you name a difference between them?

Explain how a carboxylic acid is used to make an ester.

Name each molecule.

a)

b)

Name each molecule.

a)

b)

Name each molecule.

a)

b)

Name each molecule.

a)

b)

Name this molecule.

Name this molecule.

Give an alternate but acceptable name to the molecule in Exercise 3.2.

Give an alternate but acceptable name to the molecule in Exercise 4.2.

Complete this chemical reaction.

Complete this chemical reaction.

The drug known as aspirin has this molecular structure:

Identify the functional group(s) in this molecule.

The drug known as naproxen sodium is the sodium salt of this molecule:

Identify the functional group(s) in this molecule.

Identify the ester made by reacting these molecules.

Identify the ester made by reacting these molecules.

Answers

1. They both have a carbonyl group, but an aldehyde has the carbonyl group at the end of a carbon chain, and a ketone’s carbonyl carbon is surrounded by two other carbons.

3.

a) propanal

b) butan-2-one

5.

a) 3-methylbutanoic acid

b) ethyl propionate

7. ethyl propyl ether

9. ethyl methyl ketone

11. H2O + KCH3CH2CO2

13. acid, ester, and aromatic (benzene ring)

15. propyl propionate

Chapter 125

17.5 Other Functional Groups

Learning Objectives

Identify the amine, amide, and thiol functional groups.

There are some common—and important—functional groups that contain elements other than oxygen. In this section, we will consider three of them.

Nitrogen-Containing Compounds

An amine is an organic derivative of ammonia (NH3). In amines, one or more of the H atoms in NH3 is substituted with an organic group. A primary amine has one H atom substituted with an R group:

A secondary amine has two H atoms substituted with R groups:

A tertiary amine has all three H atoms substituted with R groups:

Naming simple amines is straightforward: name the R groups as substituents and then add the suffix –amine, using numerical suffixes on the substituent names as necessary. This amine is diethylamine.

This amine is ethyldipropylamine.

Example 11 Name this amine. Solution This amine has a methyl group, an ethyl group, and a propyl group. Listing the names in alphabetical order, this amine is ethylmethylpropylamine. Test Yourself Name this amine. Answer triethylamine

As with NH3, the N atom in amines can accept a proton onto the lone electron pair on the N atom. That is, amines act as Brønsted-Lowry bases (i.e., proton acceptors):

(For more information on Brønsted-Lowry bases, see Section 13.2 “Brønsted-Lowry Acids and Bases”.) The amine becomes an ion, the organic counterpart of the ammonium (NH4+) ion.

Because no amine is presented in Table 13.2 “Strong Acids and Bases,” all amines are weak bases. The weakness of amines is about the same as that of carboxylic acids. N-containing organic compounds are very common in nature, and they all act as weak bases. Some of these compounds have rather complicated structures. Figure 17.5 “Some Naturally Occurring N-Containing Compounds” shows some N-containing substances that you may recognize.

An amide functional group is a combination of an amine group and a carbonyl group:

Amides are actually formed by bringing together an amine-containing molecule and a carboxylic acid-containing molecule. A molecule of H2O is lost, much like when an ester forms:

The bond between the N of the amine group and the C of the carbonyl group is called an amide bond. Amide bonds are particularly important in biological molecules called proteins, which are composed of strings of amino acids—molecules that have an amine group and a carboxylic acid group in them. The amine group on one amino acid reacts with the carboxylic acid group of another amino acid, making a chain held together by amide bonds. We will consider proteins later in this chapter.

Example 12 Draw the structure of the amide formed by the combination of ethylamine and butanoic acid. Solution The structures of ethylamine and butanoic acid are: When they come together to make an amide, an H2O molecule is lost, and the N of the amine group bonds to the C of the carboxyl group. The resulting molecule is: Test Yourself Draw the structure of the amide formed by the combination of methylamine and formic acid. Answer

Sulfur-Containing Compounds

Sulfur is below oxygen on the periodic table, and it occasionally shows some similar chemistry. One similarity is that an S atom can take the place of an O atom in an alcohol, to make a molecule that looks like this:

R–SH

The sulfur analog of an alcohol is called a thiol. The formal way of naming a thiol is similar to that of alcohols, except that instead of using the suffix –ol, you use the suffix –thiol. The following illustrates thiol nomenclature:

An older system uses the word mercaptan in naming simple thiols, much like the word alcohol is used with small alcohols. These thiols can also be named like this:

Many thiols have strong, objectionable odours; indeed, the spray from skunks is composed of thiols and is detectable by the human nose at concentrations of less than 10 ppb. Because natural gas is odorless, thiols are intentionally added—at very low levels, of course—so that gas leaks can be more easily detected. Not all thiols have objectionable odours; this thiol, grapefruit mercaptan, is responsible for the odor of grapefruit:

Cysteine is an amino acid that is a thiol:

Cysteine plays an important role in protein structure. If two cysteine amino acids in a protein chain approach each other, they can be oxidized, and an S–S bond (also known as a disulfide bond) is formed:

R–SH + HS–R → R–S–S–R

where the R group is the rest of the cysteine molecule. The disulfide bond is strong enough to fix the position of the two cysteine groups, thus imposing a structure on the protein. Hair is composed of about 5% cysteine, and the breaking and remaking of disulfide bonds between cysteine units is the primary mechanism behind straightening and curling hair (hair “perms”).

Food and Drink App: Amino Acids—Essential and Otherwise

The description of cysteine mentioned that it is an amino acid. Amino acids are the fundamental building blocks of proteins, a major biological component. Proteins are a necessary part of the diet; meat, eggs, and certain vegetables such as beans and soy are good sources of protein and amino acids.

All life on earth—from the lowliest single-celled organism to humans to blue whales—relies on proteins for life, so all life on earth is dependent on amino acids. The human body contains 20 different amino acids (curiously, other organisms may have a different number of amino acids). However, not all of them must be obtained from the diet. The body can synthesize 12 amino acids. The other 8 must be obtained from the diet. These 8 amino acids are called the essential amino acids. Daily requirements range from 4 mg per kilogram of body weight for tryptophan to 40 mg per kilogram of body weight for leucine. Infants and children need a greater mass per kg of body weight to support their growing bodies; also, the number of amino acids that are considered essential for infants and children is greater than for adults due to the greater protein synthesis associated with growth.

Because of the existence of essential amino acids, a diet that is properly balanced in protein is necessary. Rice and beans, a very popular food dish in Latin cuisines, actually provides all the essential amino acids in one dish; without one component, the dish would be nutritionally incomplete. Corn (maize) is the most-grown grain crop in the world, but an overreliance on it as a primary food source deprives people of lysine and tryptophan, which are two essential amino acids. People on restricted diets—whether out of necessity or by choice (e.g., vegetarians)—may be missing the proper amount of an essential amino acid, so it is important to vary the diet when possible to ensure ingestion of a wide range of protein sources.

Key Takeaways

Other functional groups include amine, amide, and thiol functional groups.

Exercises

What are the structure and name of the smallest amine?

What are the structure and name of the smallest thiol?

Identify each compound as a primary, secondary, or tertiary amine.

a)

b)

c)

Identify each compound as a primary, secondary, or tertiary amine.

a)

b)

Write the chemical reaction between each amine in Exercise 3 and HCl.

Write the chemical reaction between each amine in Exercise 4 and HNO3.

Name each amine.

a)

b)

Name each amine.

a)

b)

A peptide is a short chain of amino acids connected by amide bonds. How many amide bonds are present in this peptide?

How many amide bonds are present in this peptide? (See Exercise 9 for the definition of a peptide.)

Draw the backbone structure of the amide formed by reacting propylamine with propanoic acid.

Draw the backbone structure of the amide formed by reacting hexylamine with ethanoic acid.

Name each thiol using the –thiol suffix.

a)

b) C4H9–SH

Name each thiol in Exercise 13 with the mercaptan label.

One component of skunk spray is 3-methylbutane-1-thiol. Draw its structure. (The 1 indicates the position of the S atom.)

An S–S bond can be fairly easily broken into proteins, yielding two lone cysteine units in a protein chain. Is this process an oxidation or a reduction? Explain your answer.

Answers

1. CH3NH2; methylamine

3.

a) primary

b) tertiary

c) secondary

5.

a) C3H3CO2HSHNH2 + HCl → C3H3CO2HSHNH3Cl

b) (C6H11)(C2H5)(CH3)N + HCl → (C6H11)(C2H5)(CH3)NHCl

7.

a) ethylmethylamine

b) phenylamine

9. two

11.

13.

a) cyclohexanethiol

b) butanethiol

15.

Chapter 126

17.6 Polymers

Learning Objectives

Define the terms monomer and polymer.

Draw the structure of a polymer from its monomer.

Among other applications, organic chemistry has had a huge impact on the development of modern materials called polymers. Many objects in daily life are composed of polymers; curiously, so are several important biological materials.

Consider a molecule with a double bond, such as ethylene:

The pi electrons of the double bond can be used to form a new sigma bond to join to other ethylene molecules. The end result is a long, virtually endless molecule:

This long, almost nonstop molecule is called a polymer (from the Greek meaning “many parts”). The original part—ethylene—is called the monomer (meaning “one part”). The process of making a polymer is called polymerization. A polymer is an example of a macromolecule, the name given to a large molecule.

Simple polymers are named after their monomers; the ethylene polymer is formally called poly(ethylene), although in common use, the names are used without parentheses: polyethylene. Because adding one monomer to another forms this polymer, polyethylene is an example of a type of polymer called addition polymers. Table 17.4 “Some Monomers and Their Addition Polymers” lists some monomers and their addition polymers.

Example 13 Draw the polymer that results from the polymerization of tetrafluoroethylene. Solution In the case of this monomer, the double bond opens up and joins to other monomers, just as with ethylene. The polymer has this structure: Test Yourself Draw the polymer that results from the polymerization of vinyl chloride. Answer

Another type of polymer is the condensation polymer, which is a polymer made when two different monomers react together and release some other small molecule as a product. We have already seen an example of this in the formation of an amide bond:

Here, H2O is released when the ends of the molecules react to form a polymer.

Related to condensation polymers are the copolymers, polymers made from more than one type of monomer. For example, ethylene and propylene can be combined into a polymer that is a mixture of the two monomers. A common form of synthetic rubber called styrene butadiene rubber (SBR) is made from two monomers: styrene and butadiene:

The physical and chemical properties of polymers vary widely, based on their monomers, structures, and additives. Among the other properties that can be modified based on these factors include solubility in H2O and other solvents, melting point, flammability, color, hardness, transparency, film thickness, wetability, surface friction, moldability, and particle size—the list goes on.

The uses of polymers are almost too numerous to consider. Anything that you might describe as “plastic” is likely a polymer. Polymers are used to make everything from toothbrushes to computer cases to automobile parts. Many epoxy-based adhesives are condensation polymers that adhere strongly to other surfaces. Polyurethane paints and coatings are polymers, as are the polyester fabrics used to make clothing. Nylon, Dacron, and Mylar are polymers (in fact, both Dacron and Mylar are forms of polyethylene terephthalate [PET]). The product known as Saran Wrap was originally constructed from Saran, a name for poly(vinylidene chloride), which was relatively impervious to oxygen and could be used as a barrier to help keep food fresh. (It has since been replaced with polyethylene, which is not as impervious to atmospheric oxygen.) Poly(vinyl chloride) is the third-most produced polymer [after poly(ethylene) and poly(propylene)] and is used to make everything from plastic tubing to automobile engine parts, water pipes to toys, flooring to waterbeds and pools.

All the polymers we have considered so far are based on a backbone of (largely) carbon. There is another class of polymers based on a backbone of Si and O atoms; these polymers are called silicones. The Si atoms have organic groups attached to them, so these polymers are still organic. One example of a silicone is as follows:

Silicones are used to make oils and lubricants. They are also used as sealants for glass objects (such as aquariums) and films for waterproofing objects. Solid silicones are heat resistant and rubbery and are used to make cookware and electrical insulation.

Some very important biological materials are polymers. Of the three major food groups, polymers are represented in two: proteins and carbohydrates. Proteins are polymers of amino acids, which are monomers that have an amine functional group and a carboxylic acid functional group. These two groups react to make a condensation polymer, forming an amide bond:

Proteins are formed when hundreds or even thousands of amino acids form amide bonds to make polymers. Proteins play a crucial role in living organisms.

A carbohydrate is a compound that has the general formula Cn(H2O)n. Many carbohydrates are relatively small molecules, such as glucose:

Linking hundreds of glucose molecules together makes a relatively common material known as starch:

Starch is an important source of energy in the human diet. Note how individual glucose units are joined together. They can also be joined together in another way, like this:

This polymer is known as cellulose. Cellulose is a major component in the cell walls of plants. Curiously, despite the similarity in the building blocks, some animals (such as humans) cannot digest cellulose; those animals that can digest cellulose typically rely on symbiotic bacteria in the digestive tract for the actual digestion. Animals do not have the proper enzymes to break apart the glucose units in cellulose, so it passes through the digestive tract and is considered dietary fiber.

Deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) are also polymers, composed of long, three-part chains consisting of phosphate groups, sugars with five C atoms (ribose or deoxyribose), and N-containing rings referred to as bases. Each combination of the three parts is called a nucleotide; DNA and RNA are essentially polymers of nucleotides that have rather complicated but intriguing structures (Figure 17.6 “Nucleotides”). DNA is the fundamental material in chromosomes and is directly responsible for heredity, while RNA is an essential substance in protein synthesis.

Nucleotides. The DNA in our cells is a polymer of nucleotides, each of which is composed of a phosphate group, a sugar, and a N-containing base. Source: “DNA” by Anders Sandberg is licensed under Creative Commons Attribution 2.0 Generic

Key Takeaways

Polymers are long molecules composed of chains of units called monomers.

Several important biological polymers include proteins, starch, cellulose, and DNA.

Exercises

Explain the relationship between a monomer and a polymer.

Must a monomer have a double bond to make a polymer? Give an example to illustrate your answer.

Draw the polymer made from this monomer.

Draw the polymer made from this monomer.

What is the difference between an addition polymer and a condensation polymer?

What is the difference between a condensation polymer and a copolymer?

List three properties of polymers that vary widely with composition.

List three uses of polymers.

Draw the silicone made from this monomer.

Draw the silicone made from this monomer.

Explain how starch is a polymer.

What is the difference between starch and cellulose?

Explain how protein is a polymer.

What are the parts that compose DNA?

Answers

1. A polymer is many monomers bonded together.

3.

5. In an addition polymer, no small molecule is given off as a product, whereas in a condensation polymer, small parts of each monomer come off as a small molecule.

7. solubility in H2O and other solvents, melting point, flammability, color, hardness, transparency, film thickness, wetability, surface friction, moldability, and particle size (answers will vary)

9.

11. Starch is composed of many glucose monomer units.

13. Proteins are polymers of amino acids, which act as the monomers.

Chapter 127

17.7 End-of-Chapter Material

Additional Exercises

Cycloalkanes are named based on the number of C atoms in them, just like regular alkanes, but with the prefix cyclo– on the name. What are the names of the three smallest cycloalkanes?

Cycloalkenes are named similarly to cycloalkanes (see Exercise 1). What are the names of the cycloalkenes with five, six, and seven C atoms?

Draw the bond-line structure of all noncyclic alkanes with only four C atoms.

Draw the bond-line structure of all noncyclic alkanes with only five C atoms.

Cyclic alkanes can also have substituent groups on the ring. Draw the bond-line structure of all cyclic alkanes with only four C atoms.

Cyclic alkanes can also have substituent groups on the ring. Draw the bond-line structure of all cyclic alkanes with only five C atoms.

Draw and name all possible isomers of pentene.

Draw and name all possible normal (that is, straight-chain) isomers of heptyne.

Polyunsaturated alkenes have more than one C–C double bond. Draw the carbon backbone of all possible noncyclic polyunsaturated alkenes with four C atoms and two double bonds. What are the complete molecular formulas for each possible molecule?

Draw the carbon backbone of all possible five-carbon cyclic alkenes with two double bonds, assuming no substituents on the ring.

If a hydrocarbon is combined with enough halogen, all the H atoms will eventually be substituted with that halogen atom. Write the balanced chemical reaction between ethane and excess chlorine.

If a hydrocarbon is combined with enough halogen, all the H atoms will eventually be substituted with that halogen atom. Write the balanced chemical reaction between butane and excess bromine.

Molecules with multiple double bonds can also participate in addition reactions. Draw the structure of the product when butadiene, CH2=CH–CH=CH2, reacts with chlorine.

Draw the structure of the product when allene, CH2=C=CH2, reacts with bromine.

What is the maximum number of methyl groups that can be on a propane backbone before the molecule cannot be named as a propane compound?

Explain why cycloethane cannot exist as a real molecule.

In the gasoline industry, what is called isooctane is actually 2,2,4-trimethylpentane. Draw the structure of isooctane.

Isooctane (see Exercise 17) is an isomer of what straight-chain alkane?

The actual name for the explosive TNT is 2,4,6-trinitrotoluene. If the structure of TNT is as shown below, propose the structure of the parent compound toluene.

Phenol is hydroxybenzene, the simplest aromatic alcohol. Picric acid is an explosive derivative of phenol whose formal name is 2,4,6-trinitrophenol. With reference to Exercise 19, draw the structure of picric acid.

Draw the structures of all possible straight-chain isomers of bromopentane.

Draw the structures of all the possible isomers of butanol. Include branched isomers.

What is the final product of the double elimination of HCl from 1,1-dichloroethane?

Draw the structure of the final product of the double elimination of 1,3-dibromopropane.

Draw the structure of and name the alcohol whose double elimination would yield the same product as in Exercise 23. Name the molecule as a hydroxyl-substituted compound.

Draw the structure of and name the alcohol whose double elimination would yield the same product as in Exercise 24. Name the molecule as a hydroxyl-substituted compound.

Draw the smallest molecule that can have a separate aldehyde and carboxylic acid group.

Name the functional group(s) in the following structure:

Ethyl acetate is a common ingredient in nail-polish remover because it is a good solvent. Draw the structure of ethyl acetate.

A lactone is an ester that has its ester functional group in a ring. Draw the structure of the smallest possible lactone. (It is called acetolactone, which might give you a hint about its structure.)

Draw the structure of diethyl ether, once used as an anesthetic.

The smallest cyclic ether is called an epoxide. Draw its structure.

Write the chemical reaction of HCl with trimethylamine.

Putrescine and cadaverine are molecules with two amine groups on the opposite ends of a butane backbone and a pentane backbone, respectively. They are both emitted by rotting corpses. Draw their structures and determine their molecular formulas.

With four monomers, draw two possible structures of a copolymer composed of ethylene and propylene.

With four monomers, draw two possible structures of a copolymer composed of ethylene and styrene.

Draw the silicone that can be made from this monomer:

One of the ingredients in the original Silly Putty was a silicone polymer with two methyl groups on each Si atom. Draw this silicone.

Answers

1. cyclopropane, cyclobutane, and cyclopentane

3.

5.

7.

9.

Both molecular formulas are C4H6.

11. C2H6 + 6 Cl2 → C2Cl6 + 6 HCl

13.

15. two

17.

19.

21.

23. ethyne

25. The names are 1,2-dihydroxyethane and 1,1-dihydroxyethane, respectively.

27.

29.

31.

33. (CH3)3N + HCl → (CH3)3NHCl

35. (answers will vary)

37.

1

Appendix: Periodic Table of the Elements

Periodic Table of the Elements

In this chapter, we present some data on the chemical elements. The periodic table, introduced in Chapter 3 “Atoms, Molecules, and Ions”, lists all the known chemical elements, arranged by atomic number (that is, the number of protons in the nucleus). The periodic table is arguably the best tool in all of science; no other branch of science can summarize its fundamental constituents in such a concise and useful way. Many of the physical and chemical properties of the elements are either known or understood based on their positions on the periodic table. Periodic tables are available with a variety of chemical and physical properties listed in each element’s box. What follows here is a more complex version of the periodic table than what was presented in Chapter 3 “Atoms, Molecules, and Ions”. The Internet is a great place to find periodic tables that contain additional information.

One item on most periodic tables is the atomic mass of each element. For many applications, only one or two decimal places are necessary for the atomic mass. However, some applications (especially nuclear chemistry; see Chapter 15 “Nuclear Chemistry”) require more decimal places. The atomic masses in Table 17.1 “The Basics of the Elements of the Periodic Table” represent the number of decimal places recognized by the International Union of Pure and Applied Chemistry, the worldwide body that develops standards for chemistry. The atomic masses of some elements are known very precisely, to a large number of decimal places. The atomic masses of other elements, especially radioactive elements, are not known as precisely. Some elements, such as lithium, can have varying atomic masses depending on how their isotopes are isolated.

The web offers many interactive periodic table resources. For example, see http://www.ptable.com.

Table 17.1 The Basics of the Elements of the Periodic 2

Name	Atomic Symbol	Atomic Number	Atomic Mass	Footnotes
actinium*	Ac	89
aluminum	Al	13	26.9815386(8)
americium*	Am	95
antimony	Sb	51	121.760(1)	g
argon	Ar	18	39.948(1)	g, r
arsenic	As	33	74.92160(2)
astatine*	At	85
barium	Ba	56	137.327(7)
berkelium*	Bk	97
beryllium	Be	4	9.012182(3)
bismuth	Bi	83	208.98040(1)
bohrium*	Bh	107
boron	B	5	10.811(7)	g, m, r
bromine	Br	35	79.904(1)
cadmium	Cd	48	112.411(8)	g
caesium (cesium)	Cs	55	132.9054519(2)
calcium	Ca	20	40.078(4)	g
californium*	Cf	98
carbon	C	6	12.0107(8)	g, r
cerium	Ce	58	140.116(1)	g
chlorine	Cl	17	35.453(2)	g, m, r
chromium	Cr	24	51.9961(6)
cobalt	Co	27	58.933195(5)
copernicium*	Cn	112
copper	Cu	29	63.546(3)	r
curium*	Cm	96
darmstadtium*	Ds	110
dubnium*	Db	105
dysprosium	Dy	66	162.500(1)	g
einsteinium*	Es	99
erbium	Er	68	167.259(3)	g
europium	Eu	63	151.964(1)	g
fermium*	Fm	100
fluorine	F	9	18.9984032(5)
francium*	Fr	87
gadolinium	Gd	64	157.25(3)	g
gallium	Ga	31	69.723(1)
germanium	Ge	32	72.64(1)
gold	Au	79	196.966569(4)
hafnium	Hf	72	178.49(2)
hassium*	Hs	108
helium	He	2	4.002602(2)	g, r
holmium	Ho	67	164.93032(2)
hydrogen	H	1	1.00794(7)	g, m, r
indium	In	49	114.818(3)
iodine	I	53	126.90447(3)
iridium	Ir	77	192.217(3)
iron	Fe	26	55.845(2)
krypton	Kr	36	83.798(2)	g, m
lanthanum	La	57	138.90547(7)	g
lawrencium*	Lr	103
lead	Pb	82	207.2(1)	g, r
lithium	Li	3	[6.941(2)]†	g, m, r
lutetium	Lu	71	174.967(1)	g
magnesium	Mg	12	24.3050(6)
manganese	Mn	25	54.938045(5)
meitnerium*	Mt	109
mendelevium*	Md	101
mercury	Hg	80	200.59(2)
molybdenum	Mo	42	95.94(2)	g
neodymium	Nd	60	144.242(3)	g
neon	Ne	10	20.1797(6)	g, m
neptunium*	Np	93
nickel	Ni	28	58.6934(2)
niobium	Nb	41	92.90638(2)
nitrogen	N	7	14.0067(2)	g, r
nobelium*	No	102
osmium	Os	76	190.23(3)	g
oxygen	O	8	15.9994(3)	g, r
palladium	Pd	46	106.42(1)	g
phosphorus	P	15	30.973762(2)
platinum	Pt	78	195.084(9)
plutonium*	Pu	94
polonium*	Po	84
potassium	K	19	39.0983(1)
praseodymium	Pr	59	140.90765(2)
promethium*	Pm	61
protactinium*	Pa	91	231.03588(2)
radium*	Ra	88
radon*	Rn	86
roentgenium*	Rg	111
rhenium	Re	75	186.207(1)
rhodium	Rh	45	102.90550(2)
rubidium	Rb	37	85.4678(3)	g
ruthenium	Ru	44	101.07(2)	g
rutherfordium*	Rf	104
samarium	Sm	62	150.36(2)	g
scandium	Sc	21	44.955912(6)
seaborgium*	Sg	106
selenium	Se	34	78.96(3)	r
silicon	Si	14	28.0855(3)	r
silver	Ag	47	107.8682(2)	g
sodium	Na	11	22.98976928(2)
strontium	Sr	38	87.62(1)	g, r
sulfur	S	16	32.065(5)	g, r
tantalum	Ta	73	180.94788(2)
technetium*	Tc	43
tellurium	Te	52	127.60(3)	g
terbium	Tb	65	158.92535(2)
thallium	Tl	81	204.3833(2)
thorium*	Th	90	232.03806(2)	g
thulium	Tm	69	168.93421(2)
tin	Sn	50	118.710(7)	g
titanium	Ti	22	47.867(1)
tungsten	W	74	183.84(1)
ununhexium*	Uuh	116
ununoctium*	Uuo	118
ununpentium*	Uup	115
ununquadium*	Uuq	114
ununtrium*	Uut	113
uranium*	U	92	238.02891(3)	g, m
vanadium	V	23	50.9415(1)
xenon	Xe	54	131.293(6)	g, m
ytterbium	Yb	70	173.04(3)	g
yttrium	Y	39	88.90585(2)
zinc	Zn	30	65.409(4)
zirconium	Zr	40	91.224(2)	g
*Element has no stable nuclides. However, three such elements (Th, Pa, and U) have a characteristic terrestrial isotopic composition, and for these an atomic mass is tabulated.
†Commercially available Li materials have atomic weights that range between 6.939 and 6.996; if a more accurate value is required, it must be determined for the specific material.
g Geological specimens are known in which the element has an isotopic composition outside the limits for normal material. The difference between the atomic mass of the element in such specimens and that given in the table may exceed the stated uncertainty.
m Modified isotopic compositions may be found in commercially available material because it has been subjected to an undisclosed or inadvertent isotopic fractionation. Substantial deviations in the atomic mass of the element from that given in the table can occur.
r Range in isotopic composition of normal terrestrial material prevents a more precise A r(E) being given; the tabulated A r(E) value and uncertainty should be applicable to normal material.

Table Source: Adapted from

78, no. 11 (2005): 2051–66. © IUPAC (International Union of Pure and Applied Chemistry).

2

Appendix: Selected Acid Dissociation Constants at 25°C

Name	Formula	K a1	pKa1	K a2	pKa2
Acetic acid	CH 3 CO 2 H	1.75 × 10 −5	4.756
Arsenic acid	H 3 AsO 4	5.5 × 10 −3	2.26	1.7 × 10 −7	6.76
Benzoic acid	C 6 H 5 CO 2 H	6.25 × 10 −5	4.204
Boric acid	H 3 BO 3	5.4 × 10 −10 *	9.27*	>1 × 10 −14 *	>14*
Bromoacetic acid	CH 2 BrCO 2 H	1.3 × 10 −3	2.90
Carbonic acid	H 2 CO 3	4.5 × 10 −7	6.35	4.7 × 10 −11	10.33
Chloroacetic acid	CH 2 ClCO 2 H	1.3 × 10 −3	2.87
Chlorous acid	HClO 2	1.1 × 10 −2	1.94
Chromic acid	H 2 CrO 4	1.8 × 10 −1	0.74	3.2 × 10 −7	6.49
Citric acid	C 6 H 8 O 7	7.4 × 10 −4	3.13	1.7 × 10 −5	4.76
Cyanic acid	HCNO	3.5 × 10 −4	3.46
Dichloroacetic acid	CHCl 2 CO 2 H	4.5 × 10 −2	1.35
Fluoroacetic acid	CH 2 FCO 2 H	2.6 × 10 −3	2.59
Formic acid	CH 2 O 2	1.8 × 10 −4	3.75
Hydrazoic acid	HN 3	2.5 × 10 −5	4.6
Hydrocyanic acid	HCN	6.2 × 10 −10	9.21
Hydrofluoric acid	HF	6.3 × 10 −4	3.20
Hydrogen selenide	H 2 Se	1.3 × 10 −4	3.89	1.0× 10 −11	11.0
Hydrogen sulfide	H 2 S	8.9 × 10 −8	7.05	1 × 10 −19	19
Hydrogen telluride	H 2 Te	2.5 × 10 −3‡	2.6 ‡	1 × 10 −11	11
Hypobromous acid	HBrO	2.8 × 10 −9	8.55
Hypochlorous acid	HClO	4.0 × 10 −8	7.40
Hypoiodous acid	HIO	3.2 × 10 −11	10.5
Iodic acid	HIO 3	1.7 × 10 −1	0.78
Iodoacetic acid	CH 2 ICO 2 H	6.6 × 10 −4	3.18
Nitrous acid	HNO 2	5.6 × 10 −4	3.25
Oxalic acid	C 2 H 2 O 4	5.6 × 10 −2	1.25	1.5 × 10 −4	3.81
Periodic acid	HIO 4	2.3 × 10 −2	1.64
Phenol	C 6 H 5 OH	1.0 × 10 −10	9.99
Phosphoric acid	H 3 PO 4	6.9 × 10 −3	2.16	6.2 × 10 −8	7.21
Phosphorous acid	H 3 PO 3	5.0 × 10 −2 *	1.3*	2.0 × 10 −7 *	6.70*
Pyrophosphoric acid	H 4 P 2 O 7	1.2 × 10 −1	0.91	7.9 × 10 −3	2.10
Resorcinol	C 6 H 4 (OH) 2	4.8 × 10 −10	9.32	7.9 × 10 −12	11.1
Selenic acid	H 2 SeO 4	Strong	Strong	2.0 × 10 −2	1.7
Selenious acid	H 2 SeO 3	2.4 × 10 −3	2.62	4.8 × 10 −9	8.32
Sulfuric acid	H 2 SO 4	Strong	Strong	1.0 × 10 −2	1.99
Sulfurous acid	H 2 SO 3	1.4 × 10 −2	1.85	6.3 × 10 −8	7.2
meso -Tartaric acid	C 4 H 6 O 6	6.8 × 10 −4	3.17	1.2 × 10 −5	4.91
Telluric acid	H 2 TeO 4	2.1 × 10 −8‡	7.68 ‡	1.0 × 10 −11‡	11.0 ‡
Tellurous acid	H 2 TeO 3	5.4 × 10 −7	6.27	3.7 × 10 −9	8.43
Trichloroacetic acid	CCl 3 CO 2 H	2.2 × 10 −1	0.66
Trifluoroacetic acid	CF 3 CO 2 H	3.0 × 10 −1	0.52

Table adapted from UC Davis Chem Wiki (creative commons licence): UC Davis GeoWiki by University of California, Davis. CC-BY-NC-SA-3.0

Original source of data: CRC Handbook of Chemistry and Physics, 84th Edition (2004).

3

Appendix: Solubility Constants for Compounds at 25°C

Solubility Constants for Compounds at 25°C 3

Compound Name	Compound Formula	K sp
Aluminum phosphate	AlPO 4	9.84 × 10 −21
Barium bromate	Ba(BrO 3 ) 2	2.43 × 10 −4
Barium carbonate	BaCO 3	2.58 × 10 −9
Barium chromate	BaCrO 4	1.17 × 10 −10
Barium fluoride	BaF 2	1.84 × 10 −7
Barium iodate	Ba(IO 3 ) 2	4.01 × 10 −9
Barium nitrate	Ba(NO 3 ) 2	4.64 × 10 −3
Barium sulfate	BaSO 4	1.08 × 10 −10
Barium sulfite	BaSO 3	5.0 × 10 −10
Beryllium hydroxide	Be(OH) 2	6.92 × 10 −22
Bismuth arsenate	BiAsO 4	4.43 × 10 −10
Bismuth iodide	BiI 3	7.71 × 10 −19
Cadmium carbonate	CdCO 3	1.0 × 10 −12
Cadmium fluoride	CdF 2	6.44 × 10 −3
Cadmium hydroxide	Cd(OH) 2	7.2 × 10 −15
Cadmium iodate	Cd(IO 3 ) 2	2.5 × 10 −8
Cadmium phosphate	Cd 3 (PO 4 ) 2	2.53 × 10 −33
Cadmium sulfide	CdS	8.0 × 10 −27
Calcium carbonate	CaCO 3	3.36 × 10 −9
Calcium fluoride	CaF 2	3.45 × 10 −11
Calcium hydroxide	Ca(OH) 2	5.02 × 10 −6
Calcium iodate	Ca(IO 3 ) 2	6.47 × 10 −6
Calcium phosphate	Ca 3 (PO 4 ) 2	2.07 × 10 −33
Calcium sulfate	CaSO 4	4.93 × 10 −5
Cesium perchlorate	CsClO 4	3.95 × 10 −3
Cesium periodate	CsIO 4	5.16 × 10 −6
Cobalt(II) arsenate	Co 3 (AsO 4 ) 2	6.80 × 10 −29
Cobalt(II) hydroxide	Co(OH) 2	5.92 × 10 −15
Cobalt(II) phosphate	Co 3 (PO 4 ) 2	2.05 × 10 −35
Copper(I) bromide	CuBr	6.27 × 10 −9
Copper(I) chloride	CuCl	1.72 × 10 −7
Copper(I) cyanide	CuCN	3.47 × 10 −20
Copper(I) iodide	CuI	1.27 × 10 −12
Copper(I) thiocyanate	CuSCN	1.77 × 10 −13
Copper(II) arsenate	Cu 3 (AsO 4 ) 2	7.95 × 10 −36
Copper(II) oxalate	CuC 2 O 4	4.43 × 10 −10
Copper(II) phosphate	Cu 3 (PO 4 ) 2	1.40 × 10 −37
Copper(II) sulfide	CuS	6.3 × 10 −36
Europium(III) hydroxide	Eu(OH) 3	9.38 × 10 −27
Gallium(III) hydroxide	Ga(OH) 3	7.28 × 10 −36
Iron(II) carbonate	FeCO 3	3.13 × 10 −11
Iron(II) fluoride	FeF 2	2.36 × 10 −6
Iron(II) hydroxide	Fe(OH) 2	4.87 × 10 −17
Iron(III) hydroxide	Fe(OH) 3	2.79 × 10 −39
Iron(III) sulfide	FeS	6.3 × 10 −18
Lanthanum iodate	La(IO 3 ) 3	7.50 × 10 −12
Lead(II) bromide	PbBr 2	6.60 × 10 −6
Lead(II) carbonate	PbCO 3	7.40 × 10 −14
Lead(II) chloride	PbCl 2	1.70 × 10 −5
Lead(II) fluoride	PbF 2	3.3 × 10 −8
Lead(II) hydroxide	Pb(OH) 2	1.43 × 10 −20
Lead(II) iodate	Pb(IO 3 ) 2	3.69 × 10 −13
Lead(II) iodide	PbI 2	9.8 × 10 −9
Lead(II)selenite	PbSeO 4	1.37 × 10 −7
Lead(II) sulfate	PbSO 4	2.53 × 10 −8
Lead(II) sulfide	PbS	8.0 × 10 −28
Lithium carbonate	Li 2 CO 3	8.15 × 10 −4
Lithium fluoride	LiF	1.84 × 10 −3
Lithium phosphate	Li 3 PO 4	2.37 × 10 −11
Magnesium carbonate	MgCO 3	6.82 × 10 −6
Magnesium fluoride	MgF 2	5.16 × 10 −11
Magnesium hydroxide	Mg(OH) 2	5.61 × 10 −12
Magnesium phosphate	Mg 3 (PO 4 ) 2	1.04 × 10 −24
Manganese(II) carbonate	MnCO 3	2.24 × 10 −11
Manganese(II) iodate	Mn(IO 3 ) 2	4.37 × 10 −7
Mercury(I) bromide	Hg 2 Br 2	6.40 × 10 −23
Mercury(I) carbonate	Hg 2 CO 3	3.6 × 10 −17
Mercury(I) chloride	Hg 2 Cl 2	1.43 × 10 −18
Mercury(I) fluoride	Hg 2 F 2	3.10 × 10 −6
Mercury(I) iodide	Hg 2 I 2	5.2 × 10 −29
Mercury(I) oxalate	Hg 2 C 2 O 4	1.75 × 10 −13
Mercury(I) sulfate	Hg 2 SO 4	6.5 × 10 −7
Mercury(I) thiocyanate	Hg 2 (SCN) 2	3.2 × 10 −20
Mercury(II) bromide	HgBr 2	6.2 × 10 −20
Mercury (II) iodide	HgI 2	2.9 × 10 −29
Mercury(II) sulfide (red)	HgS	4 × 10 −53
Mercury(II) sulfide (black)	HgS	1.6 × 10 −52
Neodymium carbonate	Nd 2 (CO 3 ) 3	1.08 × 10 −33
Nickel(II) carbonate	NiCO 3	1.42 × 10 −7
Nickel(II) hydroxide	Ni(OH) 2	5.48 × 10 −16
Nickel(II) iodate	Ni(IO 3 ) 2	4.71 × 10 −5
Nickel(II) phosphate	Ni 3 (PO 4 ) 2	4.74 × 10 −32
Palladium(II) thiocyanate	Pd(SCN) 2	4.39 × 10 −23
Potassium hexachloroplatinate	K 2 PtCl 6	7.48 × 10 −6
Potassium perchlorate	KClO 4	1.05 × 10 −2
Potassium periodate	KIO 4	3.71 × 10 −4
Praseodymium hydroxide	Pr(OH) 3	3.39 × 10 −24
Rubidium perchlorate	RbClO 4	3.00 × 10 −3
Scandium fluoride	ScF 3	5.81 × 10 −24
Scandium hydroxide	Sc(OH) 3	2.22 × 10 −31
Silver(I) acetate	AgCH 3 CO 2	1.94 × 10 −3
Silver(I) arsenate	Ag 3 AsO 4	1.03 × 10 −22
Silver(I) bromate	AgBrO 3	5.38 × 10 −5
Silver(I) bromide	AgBr	5.35 × 10 −13
Silver(I) carbonate	Ag 2 CO 3	8.46 × 10 −12
Silver(I) chloride	AgCl	1.77 × 10 −10
Silver(I) chromate	Ag 2 CrO 4	1.12 × 10 −12
Silver(I) cyanide	AgCN	5.97 × 10 −17
Silver(I) iodate	AgIO 3	3.17 × 10 −8
Silver(I) iodide	AgI	8.52 × 10 −17
Silver(I) oxalate	Ag 2 C 2 O 4	5.40 × 10 −12
Silver(I) phosphate	Ag 3 PO 4	8.89 × 10 −17
Silver(I) sulfate	Ag 2 SO 4	1.20 × 10 −5
Silver(I) sulfide	Ag 2 S	6.3 × 10 −50
Silver(I) sulfite	Ag 2 SO 3	1.50 × 10 −14
Silver(I) thiocyanate	AgSCN	1.03 × 10 −12
Strontium arsenate	Sr 3 (AsO 4 ) 2	4.29 × 10 −19
Strontium carbonate	SrCO 3	5.60 × 10 −10
Strontium fluoride	SrF 2	4.33 × 10 −9
Strontium iodate	Sr(IO 3 ) 2	1.14 × 10 −7
Strontium sulfate	SrSO 4	3.44 × 10 −7
Thallium(I) bromate	TlBrO 3	1.10 × 10 −4
Thallium(I) bromide	TlBr	3.71 × 10 −6
Thallium(I) chloride	TlCl	1.86 × 10 −4
Thallium(I) chromate	Tl 2 CrO 4	8.67 × 10 −13
Thallium(I) iodate	TlIO 3	3.12 × 10 −6
Thallium(I) iodide	TlI	5.54 × 10 −8
Thallium(I) thiocyanate	TlSCN	1.57 × 10 −4
Thallium(III) hydroxide	Tl(OH) 3	1.68 × 10 −44
Tin(II) hydroxide	Sn(OH) 2	5.45 × 10 −27
Tin(II) sulfide	SnS	1.0 × 10 −25
Yttrium carbonate	Y 2 (CO 3 ) 3	1.03 × 10 −31
Yttrium fluoride	YF 3	8.62 × 10 −21
Yttrium hydroxide	Y(OH) 3	1.00 × 10 −22
Yttrium iodate	Y(IO 3 ) 3	1.12 × 10 −10
Zinc arsenate	Zn 3 (AsO 4 ) 2	2.8 × 10 −28
Zinc carbonate	ZnCO 3	1.46 × 10 −10
Zinc fluoride	ZnF 2	3.04 × 10 −2
Zinc hydroxide	Zn(OH) 2	3 × 10 −17
Zinc selenide	ZnSe	3.6 × 10 −26
Zinc sulfide (wurtzite)	ZnS	1.6 × 10 −24
Zinc sulfide (sphalerite)	ZnS	2.5 × 10 −22

From

(creative commons licence): UC Davis GeoWiki by University of California, Davis.

Original source of data:

84th Edition (2004); sulfide data from

15th Edition (1999).

4

Appendix: Standard Thermodynamic Quantities for Chemical Substances at 25°C

Substance	ΔHf° (kJ/mol)	ΔGf° (kJ/mol)	S° (J/mol K)
Aluminum:
Al(s)	0.0	0.0	28.3
Al(g)	330.0	289.4	164.6
AlCl3(s)	−704.2	−628.8	109.3
Al2O3(s)	−1675.7	−1582.3	50.9
Barium:
Ba(s)	0.0	0.0	62.5
Ba(g)	180.0	146.0	170.2
BaO(s)	−548.0	−520.3	72.1
BaCO3(s)	−1213.0	−1134.4	112.1
BaSO4(s)	−1473.2	−1362.2	132.2
Beryllium:
Be(s)	0.0	0.0	9.5
Be(g)	324.0	286.6	136.3
Be(OH)2(s)	−902.5	−815.0	45.5
BeO(s)	−609.4	−580.1	13.8
Bismuth:
Bi(s)	0.0	0.0	56.7
Bi(g)	207.1	168.2	187.0
Bromine:
Br(g)	111.9	82.4	175.0
Br2(l)	0.0	0.0	152.2
Br−(aq)	−121.6	−104.0	82.4
Br2(g)	30.9	3.1	245.5
HBr(g)	−36.3	−53.4	198.7
HBr(aq)	−121.6	−104.0	82.4
Cadmium:
Cd(s)	0.0	0.0	51.8
Cd(g)	111.8	—	167.7
CdCl2(s)	−391.5	−343.9	115.3
CdS(s)	−161.9	−156.5	64.9
Calcium:
Ca(s)	0.0	0.0	41.6
Ca(g)	177.8	144.0	154.9
CaCl2(s)	−795.4	−748.8	108.4
CaF2(s)	−1228.0	−1175.6	68.5
Ca(OH)2(s)	−985.2	−897.5	83.4
CaO(s)	−634.9	−603.3	38.1
CaSO4(s)	−1434.5	−1322.0	106.5
CaCO3(s, calcite)	−1207.6	−1129.1	91.7
CaCO3(s, aragonite)	−1207.8	−1128.2	88.0
Carbon:
C(s, graphite)	0.0	0.0	5.7
C(s, diamond)	1.9	2.9	2.4
C(s, fullerene—C60)	2327.0	2302.0	426.0
C(s, fullerene—C70)	2555.0	2537.0	464.0
C(g)	716.7	671.3	158.1
C(g, fullerene—C60)	2502.0	2442.0	544.0
C(g, fullerene—C70)	2755.0	2692.0	614.0
CBr4(s)	29.4	47.7	212.5
CBr4(g)	83.9	67.0	358.1
CCl2F2(g)	−477.4	−439.4	300.8
CCl2O(g)	−219.1	−204.9	283.5
CCl4(l)	−128.2	−62.6	216.2
CCl4(g)	−95.7	−53.6	309.9
CF4(g)	−933.6	−888.3	261.6
CHCl3(l)	−134.1	−73.7	201.7
CHCl3(g)	−102.7	6.0	295.7
CH2Cl2(l)	−124.2	—	177.8
CH2Cl2(g)	−95.4	−68.9	270.2
CH3Cl(g)	−81.9	−58.5	234.6
CH4(g)	−74.6	−50.5	186.3
CH3COOH(l)	−484.3	−389.9	159.8
CH3OH(l)	−239.2	−166.6	126.8
CH3OH(g)	−201.0	−162.3	239.9
CH3NH2(l)	−47.3	35.7	150.2
CH3NH2(g)	−22.5	32.7	242.9
CH3CN(l)	40.6	86.5	149.6
CH3CN(g)	74.0	91.9	243.4
CO(g)	−110.5	−137.2	197.7
CO2(g)	−393.5	−394.4	213.8
CS2(l)	89.0	64.6	151.3
CS2(g)	116.7	67.1	237.8
C2H2(g)	227.4	209.9	200.9
C2H4(g)	52.4	68.4	219.3
C2H6(g)	−84.0	−32.0	229.2
C3H8(g)	−103.8	−23.4	270.3
C3H6O3(s) (lactic acid)	−694.1	−522.9	142.3
C6H6(l)	49.1	124.5	173.4
C6H6(g)	82.9	129.7	269.2
C6H12O6(s) (glucose)	−1273.3	−910.4	212.1
C2H5OH(l)	−277.6	−174.8	160.7
C2H5OH(g)	−234.8	−167.9	281.6
(CH3)2O(l)	−203.3	—	—
(CH3)2O(g)	−184.1	−112.6	266.4
CH3CO2−(aq)	−486.0	−369.3	86.6
n-C12H26(l) (dodecane)	−350.9	28.1	490.6
Cesium:
Cs(s)	0.0	0.0	85.2
Cs(g)	76.5	49.6	175.6
CsCl(s)	−443.0	−414.5	101.2
Chlorine:
Cl(g)	121.3	105.3	165.2
Cl2(g)	0.0	0.0	223.1
Cl−(aq)	−167.2	−131.2	56.5
HCl(g)	−92.3	−95.3	186.9
HCl(aq)	−167.2	−131.2	56.5
ClF3(g)	−163.2	−123.0	281.6
Chromium:
Cr(s)	0.0	0.0	23.8
Cr(g)	396.6	351.8	174.5
CrCl3(s)	−556.5	−486.1	123.0
CrO3(g)	−292.9	—	266.2
Cr2O3(s)	−1139.7	−1058.1	81.2
Cobalt:
Co(s)	0.0	0.0	30.0
Co(g)	424.7	380.3	179.5
CoCl2(s)	−312.5	−269.8	109.2
Copper:
Cu(s)	0.0	0.0	33.2
Cu(g)	337.4	297.7	166.4
CuCl(s)	−137.2	−119.9	86.2
CuCl2(s)	−220.1	−175.7	108.1
CuO(s)	−157.3	−129.7	42.6
Cu2O(s)	−168.6	−146.0	93.1
CuS(s)	−53.1	−53.6	66.5
Cu2S(s)	−79.5	−86.2	120.9
CuCN(s)	96.2	111.3	84.5
Fluorine:
F(g)	79.4	62.3	158.8
F−(aq)	−332.6	−278.8	−13.8
F2(g)	0.0	0.0	202.8
HF(g)	−273.3	−275.4	173.8
HF(aq)	−332.6	−278.8	−13.8
Hydrogen:
H(g)	218.0	203.3	114.7
H2(g)	0.0	0.0	130.7
H+(aq)	0.0	0.0	0.0
Iodine:
I(g)	106.8	70.2	180.8
I−(aq)	−55.2	−51.6	111.3
I2(s)	0.0	0.0	116.1
I2(g)	62.4	19.3	260.7
HI(g)	26.5	1.7	206.6
HI(aq)	−55.2	−51.6	111.3
Iron:
Fe(s)	0.0	0.0	27.3
Fe(g)	416.3	370.7	180.5
Fe2+(aq)	−89.1	−78.9	−137.7
Fe3+(aq)	−48.5	−4.7	−315.9
FeCl2(s)	−341.8	−302.3	118.0
FeCl3(s)	−399.5	−334.0	142.3
FeO(s)	−272.0	−251.4	60.7
Fe2O3(s)	−824.2	−742.2	87.4
Fe3O4(s)	−1118.4	−1015.4	146.4
FeS2(s)	−178.2	−166.9	52.9
FeCO3(s)	−740.6	−666.7	92.9
Lead:
Pb(s)	0.0	0.0	64.8
Pb(g)	195.2	162.2	175.4
PbO(s, red or litharge)	−219.0	−188.9	66.5
PbO(s, yellow or massicot)	−217.3	−187.9	68.7
PbO2(s)	−277.4	−217.3	68.6
PbCl2(s)	−359.4	−314.1	136.0
PbS(s)	−100.4	−98.7	91.2
PbSO4(s)	−920.0	−813.0	148.5
PbCO3(s)	−699.1	−625.5	131.0
Pb(NO3)2(s)	−451.9	—	—
Pb(NO3)2(aq)	−416.3	−246.9	303.3
Lithium:
Li(s)	0.0	0.0	29.1
Li(g)	159.3	126.6	138.8
Li+(aq)	−278.5	−293.3	13.4
LiCl(s)	−408.6	−384.4	59.3
Li2O(s)	−597.9	−561.2	37.6
Magnesium:
Mg(s)	0.0	0.0	32.7
Mg(g)	147.1	112.5	148.6
MgCl2(s)	−641.3	−591.8	89.6
MgO(s)	−601.6	−569.3	27.0
Mg(OH)2(s)	−924.5	−833.5	63.2
MgSO4(s)	−1284.9	−1170.6	91.6
MgS(s)	−346.0	−341.8	50.3
Manganese:
Mn(s)	0.0	0.0	32.0
Mn(g)	280.7	238.5	173.7
MnCl2(s)	−481.3	−440.5	118.2
MnO(s)	−385.2	−362.9	59.7
MnO2(s)	−520.0	−465.1	53.1
KMnO4(s)	−837.2	−737.6	171.7
MnO4−(aq)	−541.4	−447.2	191.2
Mercury:
Hg(l)	0.0	0.0	75.9
Hg(g)	61.4	31.8	175.0
HgCl2(s)	−224.3	−178.6	146.0
Hg2Cl2(s)	−265.4	−210.7	191.6
HgO(s)	−90.8	−58.5	70.3
HgS(s, red)	−58.2	−50.6	82.4
Hg2(g)	108.8	68.2	288.1
Molybdenum:
Mo(s)	0.0	0.0	28.7
Mo(g)	658.1	612.5	182.0
MoO2(s)	−588.9	−533.0	46.3
MoO3(s)	−745.1	−668.0	77.7
Nickel:
Ni(s)	0.0	0.0	29.9
Ni(g)	429.7	384.5	182.2
NiCl2(s)	−305.3	−259.0	97.7
Ni(OH)2(s)	−529.7	−447.2	88.0
Nitrogen:
N(g)	472.7	455.5	153.3
N2(g)	0.0	0.0	191.6
NH3(g)	−45.9	−16.4	192.8
NH4+(aq)	−132.5	−79.3	113.4
N2H4(l)	50.6	149.3	121.2
N2H4(g)	95.4	159.4	238.5
NH4Cl(s)	−314.4	−202.9	94.6
NH4OH(l)	−361.2	−254.0	165.6
NH4NO3(s)	−365.6	−183.9	151.1
(NH4)2SO4(s)	−1180.9	−901.7	220.1
NO(g)	91.3	87.6	210.8
NO2(g)	33.2	51.3	240.1
N2O(g)	81.6	103.7	220.0
N2O4(l)	−19.5	97.5	209.2
N2O4(g)	11.1	99.8	304.4
HNO2(g)	−79.5	−46.0	254.1
HNO3(l)	−174.1	−80.7	155.6
HNO3(g)	−133.9	−73.5	266.9
HNO3(aq)	−207.4	−111.3	146.4
NF3(g)	−132.1	−90.6	260.8
HCN(l)	108.9	125.0	112.8
HCN(g)	135.1	124.7	201.8
Osmium:
Os(s)	0.0	0.0	32.6
Os(g)	791.0	745.0	192.6
OsO4(s)	−394.1	−304.9	143.9
OsO4(g)	−337.2	−292.8	293.8
Oxygen:
O(g)	249.2	231.7	161.1
O2(g)	0.0	0.0	205.2
O3(g)	142.7	163.2	238.9
OH−(aq)	−230.0	−157.2	−10.8
H2O(l)	−285.8	−237.1	70.0
H2O(g)	−241.8	−228.6	188.8
H2O2(l)	−187.8	−120.4	109.6
H2O2(g)	−136.3	−105.6	232.7
Phosphorus:
P(s, white)	0.0	0.0	41.1
P(s, red) −17.6	−17.6	−12.5	22.8
P(s, black)	−39.3	—	—
P(g, white)	316.5	280.1	163.2
P2(g)	144.0	103.5	218.1
P4(g)	58.9	24.4	280.0
PCl3(l)	−319.7	−272.3	217.1
PCl3(g)	−287.0	−267.8	311.8
POCl3(l)	−597.1	−520.8	222.5
POCl3(g)	−558.5	−512.9	325.5
PCl5(g)	−374.9	−305.0	364.6
PH3(g)	5.4	13.5	210.2
H3PO4(s)	−1284.4	−1124.3	110.5
H3PO4(l)	−1271.7	−1123.6	150.8
Potassium:
K(s)	0.0	0.0	64.7
K(g)	89.0	60.5	160.3
KBr(s)	−393.8	−380.7	95.9
KCl(s)	−436.5	−408.5	82.6
KClO3(s)	−397.7	−296.3	143.1
K2O(s)	−361.5	−322.1	94.1
K2O2(s)	−494.1	−425.1	102.1
KNO2(s)	−369.8	−306.6	152.1
KNO3(s)	−494.6	−394.9	133.1
KSCN(s)	−200.2	−178.3	124.3
K2CO3(s)	−1151.0	−1063.5	155.5
K2SO4(s)	−1437.8	−1321.4	175.6
Rubidium:
Rb(s)	0.0	0.0	76.8
Rb(g)	80.9	53.1	170.1
RbCl(s)	−435.4	−407.8	95.9
Selenium:
Se(s, gray)	0.0	0.0	42.4
Se(g, gray)	227.1	187.0	176.7
H2Se(g)	29.7	15.9	219.0
Silicon:
Si(s)	0.0	0.0	18.8
Si(g)	450.0	405.5	168.0
SiCl4(l)	−687.0	−619.8	239.7
SiCl4(g)	−657.0	−617.0	330.7
SiH4(g)	34.3	56.9	204.6
SiC(s, cubic)	−65.3	−62.8	16.6
SiC(s, hexagonal)	−62.8	−60.2	16.5
Silver:
Ag(s)	0.0	0.0	42.6
Ag(g)	284.9	246.0	173.0
Ag+(aq)	105.6	77.1	72.7
AgBr(s)	−100.4	−96.9	107.1
AgCl(s)	−127.0	−109.8	96.3
AgNO3(s)	−124.4	−33.4	140.9
Ag2O(s)	−31.1	−11.2	121.3
Ag2S(s)	−32.6	−40.7	144.0
Sodium:
Na(s)	0.0	0.0	51.3
Na(g)	107.5	77.0	153.7
Na+(aq)	−240.1	−261.9	59.0
NaF(s)	−576.6	−546.3	51.1
NaF(aq)	−572.8	−540.7	45.2
NaCl(s)	−411.2	−384.1	72.1
NaCl(aq)	−407.3	−393.1	115.5
NaBr(s)	−361.1	−349.0	86.8
NaBr(g)	−143.1	−177.1	241.2
NaBr(aq)	−361.7	−365.8	141.4
NaO2(s)	−260.2	−218.4	115.9
Na2O(s)	−414.2	−375.5	75.1
Na2O2(s)	−510.9	−447.7	95.0
NaCN(s)	−87.5	−76.4	115.6
NaNO3(aq)	−447.5	−373.2	205.4
NaNO3(s)	−467.9	−367.0	116.5
NaN3(s)	21.7	93.8	96.9
Na2CO3(s)	−1130.7	−1044.4	135.0
Na2SO4(s)	−1387.1	−1270.2	149.6
Sulfur:
S(s, rhombic)	0.0	0.0	32.1
S(g, rhombic)	277.2	236.7	167.8
SO2(g)	−296.8	−300.1	248.2
SO3(g)	−395.7	−371.1	256.8
SO42−(aq)	−909.3	−744.5	20.1
SOCl2(g)	−212.5	−198.3	309.8
H2S(g)	−20.6	−33.4	205.8
H2SO4(aq)	−909.3	−744.5	20.1
Tin:
Sn(s, white)	0.0	0.0	51.2
Sn(s, gray)	−2.1	0.1	44.1
Sn(g, white)	301.2	266.2	168.5
SnCl4(l)	−511.3	−440.1	258.6
SnCl4(g)	−471.5	−432.2	365.8
SnO2(s)	−557.6	−515.8	49.0
Titanium:
Ti(s)	0.0	0.0	30.7
Ti(g)	473.0	428.4	180.3
TiCl2(s)	−513.8	−464.4	87.4
TiCl3(s)	−720.9	−653.5	139.7
TiCl4(l)	−804.2	−737.2	252.3
TiCl4(g)	−763.2	−726.3	353.2
TiO2(s)	−944.0	−888.8	50.6
Uranium:
U(s)	0.0	0.0	50.2
U(g)	533.0	488.4	199.8
UO2(s)	−1085.0	−1031.8	77.0
UO2(g)	−465.7	−471.5	274.6
UF4(s)	−1914.2	−1823.3	151.7
UF4(g)	−1598.7	−1572.7	368.0
UF6(s)	−2197.0	−2068.5	227.6
UF6(g)	−2147.4	−2063.7	377.9
Vanadium:
V(s)	0.0	0.0	28.9
V(g)	514.2	754.4	182.3
VCl3(s)	−580.7	−511.2	131.0
VCl4(l)	−569.4	−503.7	255.0
VCl4(g)	−525.5	−492.0	362.4
V2O5(s)	−1550.6	−1419.5	131.0
Zinc:
Zn(s)	0.0	0.0	41.6
Zn(g)	130.4	94.8	161.0
ZnCl2(s)	−415.1	−369.4	111.5
Zn(NO3)2(s)	−483.7	—	—
ZnS(s, sphalerite)	−206.0	−201.3	57.7
ZnSO4(s)	−982.8	−871.5	110.5
Zirconium:
Zr(s)	0.0	0.0	39.0
Zr(g)	608.8	566.5	181.4
ZrCl2(s)	−502.0	−386	110
ZrCl4(s)	−980.5	−889.9	181.6

From UC Davis Chem Wiki (creative commons licence): UC Davis GeoWiki by University of California, Davis. CC-BY-NC-SA-3.0

Original Source of data: CRC Handbook of Chemistry and Physics,84th Edition (2004).

5

Appendix: Standard Reduction Potentials by Value

Standard Cathode (Reduction) Half-Reaction	Standard Reduction Potential E° (volts)
Li+(aq) + e– ⇌ Li(s)	–3.040
Ba2+ + 2e−⇌ Ba(s)	–2.92
Rb+ + e– ⇌ Rb (s)	-2.98
K+(aq) + e– ⇌ K(s)	-2.93
Cs+(aq) + e– ⇌ Cs(s)	-2.92
Ba2+(aq) + 2e- ⇌ Ba(s)	-2.91
Sr2+(aq) + 2e- ⇌ Sr(s)	-2.89
Ca2+(aq) + 2e- ⇌ Ca(s)	–2.84
Na+(aq) + e– ⇌ Na(s)	–2.713
Mg(OH)2(s) + 2e−⇌ Mg(s) + 2OH−	–2.687
La3+ + 3e−⇌ La(s)	–2.38
Mg2+(aq) + 2e– ⇌ Mn(s)	-2.356
Ce3+ + 3e−⇌ Ce(s)	–2.336
Al(OH)4− + 3e−⇌ Al(s) + 4OH−	–2.310
AlF63− + 3e−⇌ Al(s) + 6F−	–2.07
Be2+ + 2e−⇌ Be(s)	–1.99
B(OH)4− + 3e−⇌ B(s) + 4OH−	–1.811
U3+ + 3e−⇌ U(s)	–1.66
Al3+(aq) + 3e– ⇌ Al(s)	–1.676
SiF62− + 4e−⇌ Si(s) + 6F−	–1.37
Zn(CN)42− + 2e−⇌ Zn(s) + 4CN	–1.34
Zn(OH)42− + 2e−⇌ Zn(s) + 4OH−	–1.285
Mn2+ + 2e−⇌ Mn(s)	–1.17
V2+ + 2e−⇌ V(s)	–1.13
2SO32− + 2H2O(l) + 2e− ⇌ S2O42− + 4OH−	–1.13
Zn(NH3)42+ + 2e− ⇌ Zn(s) + 4NH3	–1.04
O2 (aq) + e– ⇌ O2–(aq)	-1.0
Cd(CN)42− + 2e−⇌ Cd(s) + 4CN−	–0.943
MoO42− + 4H2O(l) + 6e−⇌Mo(s) + 8OH−	–0.913
SiO2(s) + 4H+ + 4e−⇌ Si(s) + 2H2O(l)	–0.909
SO42− + H2O(l) + 2e− ⇌ SO32−+ 2OH−	–0.936
Cr2+ + 2e− ⇌ Cr(s)	–0.90
B(OH)3 + 3H+ + 3e− ⇌ B(s) + 3H2O(l)	–0.890
2H2O(l) + 2e– ⇌ H2(g) + 2OH–(aq)	-0.828
Zn2+(aq) + 2e– ⇌ Zn(s)	–0.7618
Co(OH)2(s) + 2e−⇌ Co(s) + 2OH−	–0.746
Cr3+(aq) + 3e– ⇌ Cr(s)	–0.424
Ni(OH)2 + 2e−⇌ Ni(s) + 2OH−	–0.72
Ag2S(s) + 2e−⇌ 2Ag(s) + S2−	–0.71
Se(s) + 2e−⇌ Se2−	–0.67 in 1 M NaOH
Cd(NH3)42+ + 2e−⇌ Cd(s) + 4NH3	–0.622
2SO32− + 3H2O(l) + 4e− ⇌S2O32− + 6OH−	–0.576 in 1 M NaOH
U4+ + e− ⇌ U3+	–0.52
SiO2(s) + 8H+ + 8e− ⇌ SiH4(g) + 2H2O(l)	–0.516
Sb + 3H+ + 3e− ⇌ SbH3(g)	–0.510
H3PO3+ 2H+ + 2e− ⇌ H3PO2 + H2O(l)	-0.50
Ni(NH3)62+ + 2e− ⇌ Ni(s) + 6NH3	–0.49
2CO2(g) + 2H+ +2e−⇌ H2C2O4	–0.481
Cr3+ + e−⇌ Cr2+	–0.424
Fe2+(aq) + 2e– ⇌ Fe(s)	-0.44
S(s) + 2e−⇌ S2−	–0.407
Cd2+(aq) + 2e– ⇌ Cd(s)	–0.4030
Ag(NH3)2+ + e−⇌ Ag(s) + 2NH3	–0.373
Ti3+ + e−⇌ Ti2+	–0.37
PbSO4(s) + 2e−⇌ Pb(s) + SO42−	–0.356
Co2+(aq) + 2e– ⇌ Co(s)	–0.277
2SO42− + 4H+ + 2e− ⇌ S2O62− + 2H2O(l)	–0.25
N2(g) + 5H+ + 4e−⇌ N2H5+	–0.23
H3PO4 + 2H+ + 2e−⇌ H3PO3 + H2O(l)	-0.28
Ni2+(aq) + 2e– ⇌ Ni(s)	–0.257
V3+ + e− ⇌ V2+	–0.255
As + 3H+ + 3e− ⇌ AsH3(g)	–0.225
CO2(g) + 2H+ + 2e− ⇌ HCO2H	–0.20
Mo3+ + 3e− ⇌ Mo(s)	–0.2
Sn2+ + 2e− ⇌ Sn(s)	–0.19 in 1 M HCl
Ti2+ + 2e−⇌ Ti(s)	–0.163
MoO2(s) + 4H+ + 4e−⇌ Mo(s) + 2H2O(l)	–0.152
AgI(s) + e− ⇌ Ag(s) + I−	–0.152
Sn2+(aq) + 2e– ⇌ Sn(s)	-0.14
Pb2+(aq) + 2e– ⇌ Pb(s)	-0.126
CrO42− + 4H2O(l) + 3e− ⇌2Cr(OH)4− + 4OH−	–0.13 in 1 M NaOH
WO2(s) + 4H+ + 4e−⇌ W(s) + 2H2O(l)	–0.119
Se(s) + 2H+ + 2e−⇌ H2Se(g)	–0.115
CO2(g) + 2H+ + 2e−⇌ CO(g) + H2O(l)	–0.106
WO3(s) + 6H+ + 6e−⇌ W(s) + 3H2O(l)	–0.090
Hg2I2(s) + 2e−⇌ 2Hg(l) + 2I−	–0.0405
Fe3+(aq) + 3e– ⇌ Fe(s)	-0.037
2H+(aq) + 2e– ⇌ H2(g)	0.00
P(s,white) + 3H+ + 3e−⇌ PH3(g)	0.06
AgBr(s) + e−⇌ Ag(s) + Br−	0.071
S4O62− + 2e−⇌2S2O32−	0.080
Co(NH3)63+ +e−⇌Co(NH3)62+	0.1
Ru(NH3)63+ + e−⇌ Ru(s) + Ru(NH3)62+	0.10
S(s) + 2H+ + 2e−⇌ H2S	0.144
Sn4+(aq) + 2e– ⇌ Sn2+(aq)	0.154
Cu2+(aq) + e– ⇌ Cu+(aq)	0.159
UO22+ + e− ⇌UO2+	0.16
Co(OH)3(s) + e−⇌ Co(OH)2(s) + OH−	0.17
ClO4–(aq) + H2O(l) + 2e- ⇌ ClO3–(aq) + 2OH–(aq)	0.17
SO42− + 4H+ + 2e− ⇌ H2SO32−+ H2O(l)	0.172
BiCl4− + 3e−⇌ Bi(s) + 4Cl−	0.199
SbO+ + 2H+ + 3e−⇌ Sb(s) + H2O(l)	0.212
AgCl(s) + e– ⇌ Ag(s) + Cl–(aq)	0.2223
HCHO + 2H+ + 2e−⇌ CH3OH	0.2323
HAsO2 + 3H+ + 3e−⇌ As(s) + 2H2O(l)	0.240
Ru3+ + e−⇌ Ru2+	0.249
IO3−+ 3H2O(l) + 6e−⇌ I− + 6OH−	0.257
Hg2Cl2(s) + 2e−⇌ 2Hg(l) + 2Cl−	0.2682
UO2+ + 4H+ + e− ⇌U4+ + 2H2O(l)	0.27
Bi3+ + 3e−⇌ Bi(s)	0.317
UO22+ + 4H+ + 2e− ⇌ U4+ + 2H2O(l)	0.327
VO2+ + 2H+ +e−⇌V3+ + H2O(l)	0.337
Cu2+(aq) + 2e– ⇌ Cu(s)	0.3419
ClO3–(aq) + H2O(l) + 2e– ⇌ ClO2–(aq) + 2OH–(aq)	0.35
Fe(CN)63− + e− ⇌ Fe(CN)64−	0.356
O2(g) + 2H2O(l) + 4e−⇌ 4OH−	0.401
ClO− + H2O(l) + e− ⇌ ½Cl2(g) + 2OH−	0.421 in 1 M NaOH
Ag2C2O4(s) + 2e−⇌ 2Ag(s) + C2O42−	0.47
Cu+(aq) + e– ⇌ Cu(s)	0.52
I2(s) + 2e– ⇌ 2I–(aq)	0.5355
I3− + 2e−⇌ 3I−	0.536
Ga3+ + 3e−⇌ Ga(s)	-0.56
Cu2+ + Cl− + e−⇌ CuCl(s)	0.559
S2O62− + 4H+ + 2e−⇌ 2H2SO3	0.569
H3AsO4 + 2H+ + 2e−⇌ HAsO2 + 2H2O(l)	0.560
ClO2–(aq) + H2O(l) + 2e– ⇌ ClO–(aq) + 2OH–(aq)	0.59
MnO4− + 2H2O(l) + 3e−⇌ MnO2(s) + 4OH−	0.60
Sb2O5(s) + 6H+ + 4e−⇌ 2SbO+ + 3H2O(l)	0.605
PtCl62− + 2e−⇌ PtCl42- + 2Cl−	0.68
RuO2(s) + 4H+ + 4e−⇌ Ru(s) + 2H2O(l)	0.68
O2(g) + 2H+ + 2e−⇌ H2O2	0.695
PtCl42− + 2e−⇌ Pt(s) + 4Cl−	0.73
H2SeO3 + 4H+ + 4e−⇌ Se(s) + 3H2O(l)	0.74
Tl3+ + 3e−⇌ Tl(s)	0.742
Fe3+(aq) + e– ⇌ Fe2+(aq)	0.771
Hg22+(aq) + 2e– ⇌ 2Hg(l)	0.7960
Ag+(aq) + e- ⇌ Ag(s)	0.7996
Hg2+(aq) + 2e– ⇌ Hg(l)	0.8535
Cu2+ + I− +e−⇌ CuI(s)	0.86
Ru(CN)63− +e−⇌ Ru(s) + Ru(CN)64−	0.86
ClO− + H2O(l) + 2e−⇌ Cl− + 2OH−	0.890 in 1 M NaOH
2Hg2+(aq) + 2e– ⇌ Hg22+(aq)	0.911
HgO(s) + 2H+ + 2e−⇌ Hg(l) + H2O(l)	0.926
NO3− + 3H+ + 2e−⇌ HNO2 + H2O(l)	0.94
MnO2(s) + 4H+ + e– ⇌ Mn3+ (aq) + H2O(I)	0.95
NO3–(aq) + 4H+(aq) + 3e– ⇌ NO(g) + 2H2O(l)	0.96
HIO + H+ + 2e−⇌ I− + H2O(l)	0.985
HNO2 + H+ +e−⇌ NO(g) + H2O(l)	0.996
VO22+ + 2H+ +e−⇌ VO2+ + H2O(l)	1.000
AuCl4− + 3e−⇌ Au(s) + 4Cl−	1.002
NO 2 (g) + H + (aq) + e – ⇌ HNO 2 (aq)	1.07
Br2(l) + 2e– ⇌ 2Br–(aq)	1.087
Fe(phen)63+ +e− ⇌ Fe(phen)62+	1.147
SeO43− + 4H+ + e−⇌ H2SeO3 + H2O(l)	1.151
ClO3− + 2H+ + e−⇌ ClO2(g) + H2O	1.175
ClO3− + 3H+ + 2e− ⇌ HClO2 + H2O	1.181
IO3− + 6H+ + 5e−⇌ ½I2(s) + 3H2O(l)	1.195
Pt2+ + 2e−⇌ Pt(s)	1.2
ClO4− + 2H+ + 2e− ⇌ ClO3− + H2O	1.201
O2(g) + 4H+(aq) + 4e– ⇌ 2H2O(l)	1.229
MnO2(s) + 4H+ + 2e−⇌ Mn2+ + 2H2O(l)	1.23
Tl3+ + 2e− ⇌ Tl+	0.77 in 1 M HCl
2HNO2 + 4H+ + 4e−⇌ N2O(g) + 3H2O(l)	1.297
HOBr + H+ + 2e−⇌ Br− + H2O(l)	1.341
Cr 2 O 72- (aq) + 14H + (aq) + 6e – ⇌ 2Cr 3+ (aq) + 7H 2 O(l)	1.36
Cr2O72− + 14H+ + 6e− ⇌ 2Cr3+ + 7H2O(l)	1.36
Cl2(g) + 2e– ⇌ 2Cl–(aq)	1.396
Au3+ + 2e−⇌ Au+	1.36
Hg2Br2(s) + 2e−⇌ 2Hg(l) + 2Br−	1.392
Ce4+(aq) + e– ⇌ Ce3+(aq)	1.44
PbO2(s) + 4H+ +2e– ⇌ Pb2+(aq) + 2H2O(l)	1.46
BrO3− + 6H+ + 6e−⇌ Br− + 3H2O	1.478
Mn3+ + e−⇌ Mn2+	1.5
MnO4–(aq) + 8H+(aq) + 5e– ⇌ Mn2+(aq) + 4H2O(l)	1.51
BrO3− + 6H+ + 5e−⇌ ½Br2(l) + 3H2O	1.5
Au3+ + 3e−⇌ Au(s)	1.52
2NO(g) + 2H+ + 2e−⇌ N2O(g) + H2O(l)	1.59
HOBr + H+ + e−⇌ ½Br− + H2O(l)	1.604
HClO2 + 2H+ + 2e−⇌ HOCl + H2O	1.64
PbO2(s) + 4SO42− + 4H+ + 2e−⇌ PbSO4(s) + 2H2O(l)	1.690
MnO4− + 4H+ +3e−⇌ MnO2(s) + 2H2O(l)	1.70
Ce4+ + e−⇌ Ce3+	1.72
N2O(g) + 2H+ + 2e−⇌ N2(g) + H2O(l)	1.77
H2O2(aq) + 2H+(aq) + 2e– ⇌ 2H2O(l)	1.763
Au+ + e−⇌ Au(s)	1.83
Co3+(aq) + e– ⇌ Co2+(aq)	1.92
S2O82− + 2e−⇌2SO42−	1.96
O3(g) + 2H+(aq) + 2e– ⇌ O2(g) + H2O(l)	2.07
BaO(s) + 2H+ + 2e−⇌ Ba(s) + H2O(l)	2.365
F2(g) + 2e– ⇌ 2F–(aq)	2.87
F2(g) + 2H+ + 2e−⇌ 2HF	3.053

From UC Davis Chem Wiki (creative commons licence): UC Davis GeoWiki by University of California, Davis. CC-BY-NC-SA-3.0

Original source materials: Bard, A. J.; Parsons, B.; Jordon, J., eds. Standard Potentials in Aqueous Solutions, Dekker: New York, 1985; Milazzo, G.; Caroli, S.; Sharma, V. K. Tables of Standard Electrode Potentials, Wiley: London, 1978; Swift, E. H.; Butler, E. A. Quantitative Measurements and Chemical Equilibria, Freeman: New York, 1972.

6

Glossary

Term	Definition	Section of Book
abbreviated electron configuration	An electron configuration that uses one of the noble gases to represent the core of electrons up to that element	Organization of Electrons in Atoms
absolute zero	The minimum possible temperature, labeled 0 K (zero kelvins)	Other Units: Temperature and Density
acid	An ionic compound of the H+ cation dissolved in water	Acids
acid	A compound that increases the amount of H+ ions in an aqueous solution	Neutralization Reactions
acid dissociation constant ( Ka )	The equilibrium constant for the dissociation of a weak acid into ions	Some Special Types of Equilibria
acid salt	An ionic compound whose aqueous solution is slightly acidic	Strong and Weak Acids and Bases and Their Salts
activated complex	See transition state	Reaction Mechanisms
activation energy (Ea)	The minimum amount of kinetic energy molecules must possess for an effective collision to occur	Factors that Affect the Rate of Reactions
active site	Area of enzymatic action where substrate molecules react	Catalysis
activity series	A list of elements that will replace elements below them in single-replacement reactions	Types of Chemical Reactions: Single- and Double-Displacement Reactions
actual yield	The amount that is actually produced in a chemical reaction	Yields
addition reaction	A reaction where atoms are added across a double or triple bond	Hydrocarbons
adhesion	The tendency of a substance to interact with other substances because of intermolecular forces	Properties of Liquids
adsorb	Bind to the surface of another substance	Catalysis
alcohol	An organic compound that contains an OH functional group	Alkyl halides and alcohols
aldehyde	A compound that has a carbonyl functional group at the end of a chain of C atoms	Other Oxygen-Containing Functional Groups
aliphatic hydrocarbons	A hydrocarbon based on chains of C atoms	Hydrocarbons
alkaline battery	A type of dry cell that contains an alkaline (i.e., basic) moist paste, rather than an acidic paste	Applications of Redox Reactions: Voltaic Cells
alkane	An aliphatic hydrocarbon with only single covalent bonds	Hydrocarbons
alkene	An aliphatic hydrocarbon that contains a C–C double bond	Hydrocarbons
alkyl halide	An organic compound that contains a halogen atom	Alkyl halides and alcohols
alkyne	An aliphatic hydrocarbon that contains a C–C triple bond	Hydrocarbons
alpha particle	A type of radioactive emission equivalent to a helium nucleus	Radioactivity
amide group	A functional group that is the combination of the amine and carbonyl functional groups	Other Functional Groups
amide bond	The bond between the N atom and the C atom in an amide.	Other Functional Groups
amine	An organic derivative of ammonia	Other Functional Groups
amorphous solid	A solid with no long-term structure or repetition	Solids
amphiprotic	A substance that can act as a proton donor or a proton acceptor	Brønsted-Lowry Acids and Bases
analyte	The reagent of unknown concentration	Acid-Base Titrations
angular momentum quantum number (ℓ)	An index that affects the energy and the spatial distribution of an electron in an atom	Quantum Numbers for Electrons
anion	A species with an overall negative charge	Ions and Ionic Compounds
anode	The half cell that contains the oxidation reaction	Applications of Redox Reactions: Voltaic Cells
antibonding molecular orbital	A higher energy molecular orbital generated by destructive combination of atomic orbitals	Molecular Orbitals
aromatic hydrocarbons	Flat ring systems, which contain continuously overlapping p orbitals, such as benzene	Hydrocarbons
Arrhenius acid	A compound that increases the hydrogen ion concentration in aqueous solution	Arrhenius Acids and Bases
Arrhenius base	A compound that increases the hydroxide ion concentration in aqueous solution	Arrhenius Acids and Bases
atmosphere (atm)	A unit of pressure equal to the average atmospheric pressure at sea level; defined as exactly 760 mmHg	Pressure
atom	The smallest piece of an element that maintains the identity of that element	Atomic Theory
atomic mass	The sum of the number of protons and neutrons in a nucleus	Atomic Theory
atomic mass	The weighted average of the masses of the isotopes that compose an element	Masses of Atoms and Molecules
atomic mass unit	One-twelfth of the mass of a carbon-12 atom	Masses of Atoms and Molecules
atomic number	The number of protons in an atom	Atomic Theory
atomic radius	An indication of the size of an atom	Periodic Trends
atomic symbol	A one- or two-letter representation of the name of an element	Atomic Theory
atomic theory	The concept that atoms play a fundamental role in chemistry	Atomic Theory
aufbau principle	(German for “building up”): electrons fill the lowest energy orbitals first.	Organization of Electrons in Atoms
autoionization constant of water ( Kw )	The product of the hydrogen ion and hydroxide ion concentrations	Autoionization of Water
autoionization of water	Water molecules act as acids (proton donors) and bases (proton acceptors) with each other to a tiny extent in all aqueous solutions	Autoionization of Water
Avogadro’s law	A gas law that relates number of particles to volume	Other Gas Laws
balanced chemical equation	A condition when the reactants and products of a chemical equation have the same number of atoms of all elements present	The Chemical Equation
base	A compound that increases the amount of OH− ions in an aqueous solution	Neutralization Reactions
basic salt	An ionic compound whose aqueous solution is slightly basic	Strong and Weak Acids and Bases and Their Salts
becquerel (Bq)	A unit of radioactivity equal to 1 decay per second	Units of Radioactivity
beta particle	A type of radioactive emission equivalent to an electron	Radioactivity
boiling (or vaporization)	The process of a liquid becoming a gas	Phase Transitions: Melting, Boiling and Subliming
boiling point	The characteristic temperature at which a liquid becomes a gas	Phase Transitions: Melting, Boiling and Subliming
boiling point elevation	The increase of a solution’s boiling point because of the presence of solute	Colligative Properties of Solutions
boiling point elevation constant ( Kb )	The constant that relates the molality concentration of a solution and its boiling point change	Colligative Properties of Solutions
bond energy	The approximate amount of energy needed to break a covalent bond	Other Aspects of Covalent Bonding
bond order	A method of evaluating bond strength	Molecular Orbitals
bonding electron pair	A pair of electrons that makes a covalent bond	Covalent Bonds
bonding molecular orbital	The lower energy molecular orbital generated by constructive combination of atomic orbitals	Molecular Orbitals
Boyle’s law	A gas law that relates pressure and volume at constant temperature and amount	Gas Laws
branched hydrocarbons	A carbon compound that is not a straight chain, having substituents appended to the longest chain	Branched Hydrocarbons
Brønsted-Lowry acid	Any species that can donate a proton to another molecule	Brønsted-Lowry Acids and Bases
Brønsted-Lowry base	Any species that can accept a proton from another molecule	Brønsted-Lowry Acids and Bases
buffer	A solution that resists dramatic changes in pH	Buffers
buffer capacity	The amount of strong acid or base a buffer can counteract	Buffers
burette or buret	A precisely calibrated volumetric delivery tube	Acid-Base Titrations
calorie	A unit of energy measurement originally defined in terms of warming up a given quantity of water. 1 cal = 4.184 J	Energy
calorimeter	A container used to measure the heat of a chemical reaction	Enthalpy and Chemical Reactions
calorimetry	The process of measuring enthalpy changes for chemical reactions	Enthalpy and Chemical Reactions
capillary action	The behavior of a liquid in narrow surfaces due to differences in adhesion and cohesion	Properties of Liquids
carbonyl group	A functional group where an O atom and a C atom are joined with a double bond	Other Oxygen-Containing Functional Groups
carboxyl group	A functional group composed of a carbonyl group and an OH group	Other Oxygen-Containing Functional Groups
carboxylate ion	A negatively charged ion derived from a carboxylic acid	Other Oxygen-Containing Functional Groups
carboxylic acid	A molecule with a carboxyl group	Other Oxygen-Containing Functional Groups
catalyst	A substance that increases the speed of a reaction	Shifting Equilibria: Le Chatelier’s Principle
catalyst	A substance thaty accelerates a reaction by participating in it without being consumed	Factors that Affect the Rate of Reactions
catalyst	A substance that lowers the activation energy of a specific reaction by providing an alternate reaction pathway	Catalysis
cathode	The half cell that contains the reduction reaction	Applications of Redox Reactions: Voltaic Cells
cation	A species with an overall positive charge	Ions and Ionic Compounds
central atom	The atom in the center of a molecule	Covalent Bonds
Charles’s law	A gas law that relates volume and temperature at constant pressure and amount	Gas Laws
chemical bond	The connection between two atoms in a molecule	Molecules an Chemical Nomenclature
chemical change	The process of demonstrating a chemical property	Some Basic Definitions
chemical equation	A concise way of representing a chemical reaction	The Chemical Equation
chemical equilibrium	The point at which forward and reverse chemical reactions balance each other’s progress	Chemical Equilibrium
chemical nomenclature	A very specific system for naming compounds, in which unique substances get unique names	Molecules an Chemical Nomenclature
chemical property	A characteristic that describes how matter changes form in the presence of other matter	Some Basic Definitions
chemistry	The study of the interactions of matter with other matter and with energy	Introduction
coefficient	The part of a number in scientific notation that is multiplied by a power of 10	Expressing Numbers
coefficient	A number in a chemical equation indicating more than one molecule of the substance	The Chemical Equation
cohesion	The tendency of a substance to interact with itself	Properties of Liquids
colligative property	A property of solutions related to the fraction that the solute particles occupy in the solution, not their identity	Colligative Properties of Solutions
collision theory	The theory that reactions occur when reactant molecules “effectively collide”	Factors that Affect the Rate of Reactions
combined gas law	A gas law that combines pressure, volume, and temperature	Other Gas Laws
combustion reaction	A chemical reaction in which a reactant combines with oxygen to produce oxides of all other elements as products	Composition, Decomposition, and Combustion Reactions
complete ionic equation	A chemical equation in which the dissolved ionic compounds are written as separated ions	Ionic Equations: A Closer Look
composition reaction	A chemical reaction in which a single substance is produced from multiple reactants	Composition, Decomposition, and Combustion Reactions
compound	A combination of more than one element	Some Basic Definitions
compressibility factor	A measure of the extent of deviation from ideal gas behaviour	Real Gases
concentrated solution	A solution with a lot of solute	Some Definitions
concentration	How much solute is dissolved in a given amount of solvent	Some Definitions
concentration (verb)	The removal of solvent, which increases the concentration of the solute in the solution	Dilutions and Concentrations
condensation	The process of a gas becoming a liquid	Phase Transitions: Melting, Boiling and Subliming
condensed structure	A listing of the atoms bonded to each C atom in a chain	Hydrocarbons
conjugate acid-base pair	Two species whose formulas differ by only a hydrogen ion	Brønsted-Lowry Acids and Bases
continuous spectrum	An image that contains all colors of light	Quantum Numbers for Electrons
conversion factor	A fraction that can be used to convert a quantity from one unit to another	Converting Units
covalent bond	A chemical bond formed by two atoms sharing electrons	Covalent Bonds
covalent network solids	A crystalline solid composed of atoms of one or more elements that are covalently bonded together in a seemingly never-ending fashion	Solids
critical point	The point at the highest temperature and pressure at which liquids and gases remain distinguishable	Properties of Liquids
crystalline solid	A solid with a regular, repeating three-dimensional structure	Solids
curie	A unit of radioactivity equal to 3.7×1010 decays/s	Units of Radioactivity
d block	The columns of the periodic table in which d subshells are being occupied	Electronic Structure and the Periodic Table
Dalton’s law of partial pressures	The total pressure of a gas mixture, Ptot, is equal to the sum of the partial pressures of the components, Pi	Gas Mixtures
daughter isotope	The product left over from the parent isotope in a nuclear equation	Radioactivity
decomposition reaction	A chemical reaction in which a single substance becomes more than one substance	Composition, Decomposition, and Combustion Reactions
degrees	The unit of temperature scales	Other Units: Temperature and Density
density	A physical property defined as a substance’s mass divided by its volume	Other Units: Temperature and Density
deposition	The process of a gas becoming a solid	Phase Transitions: Melting, Boiling and Subliming
derived unit	A unit that is a product or a quotient of a fundamental unit	Expressing Units
diatomic molecule	A molecule with only two atoms	Molecules an Chemical Nomenclature
diffusion	The movement of gas molecules through one or more additional types of gas via random molecular motion	Molecular Effusion and Diffusion
dilute	A solution with very little solute	Some Definitions
dilution	The addition of solvent, which decreases the concentration of the solute in the solution	Dilutions and Concentrations
dilution equation	The mathematical formula for calculating new concentrations or volumes when a solution is diluted or concentrated	Dilutions and Concentrations
dipole-dipole interactions	An intermolecular force caused by molecules with a permanent dipole	Intermolecular Forces
dispersion force (or London dispersion force)	An intermolecular force caused by the instantaneous position of an electron in a molecule	Intermolecular Forces
dissociation	The process of an ionic compound separating into ions when it dissolves	Ionic Equations: A Closer Look
double bond	A covalent bond composed of two pairs of bonding electrons	Covalent Bonds
double-replacement reaction	A chemical reaction in which parts of two ionic compounds are exchanged	Types of Chemical Reactions: Single- and Double-Displacement Reactions
dry cell	A modern battery that does not contain large amounts of aqueous solution	Applications of Redox Reactions: Voltaic Cells
dynamic equilibrium	When a process still occurs but the opposite process also occurs at the same rate so that there is no net change in the system.	Properties of Liquids
effective nuclear charge (Zeff)	The net nuclear charge feld by valence electrons	Periodic Trends
effusion	The movement of gas molecules from one container to another via a tiny hole	Molecular Effusion and Diffusion
electrodes	The cathode or anode of a voltaic cell	Applications of Redox Reactions: Voltaic Cells
electrolysis	The process of making a nonspontaneous redox reaction occur by forcing electricity into a cell	Electrolysis
electrolytic cell	A cell into which electricity is forced to make a nonspontaneous reaction occur	Electrolysis
electromagnetic spectrum	The full span of the possible wavelengths, frequencies, and energies of light	Light
electron	A tiny subatomic particle with a negative charge	Atomic Theory
electron affinity (EA)	The energy change when a gas-phase atom accepts an electron	Periodic Trends
electron configuration	A listing of the shell and subshells labels	Organization of Electrons in Atoms
electron deficient molecules	A molecule with less than eight electrons in the valence shell of an atom	Violations of the Octet Rule
electron group geometry	how electron groups (bonds and nonbonding electron pairs) are arranged	Molecular Shapes and Polarity
electron groups	A covalent bond of any type or a lone electron pair	Molecular Shapes and Polarity
electron shell	A term used to describe electrons with the same principal quantum number	Quantum Numbers for Electrons
electronegativity	A scale for judging how much atoms of any element attract electrons	Other Aspects of Covalent Bonding
electroplating	The deposition of a thin layer of metal on an object for protective or decorative purposes	Electrolysis
element	A substance that cannot be broken down into simpler chemical substances by ordinary chemical means	Some Basic Definitions
elementary step	Each event that occurs in a chemical reaction as a result of an effective collision	Reaction Mechanisms
elimination reaction	The removal of a functional group (either X or OH) and a H atom from an adjacent carbon	Alkyl halides and alcohols
endothermic	A chemical reaction that has a positive change in enthalpy	Enthalpy and Chemical Reactions
energy	The ability to do work. is the ability to do work	Energy
enthalpy change	The heat of a process at constant pressure; denoted ΔH	Enthalpy and Chemical Reactions
enthalpy of formation	The enthalpy change for a formation reaction; denoted ΔHf. and is given the symbol ΔHf	Formation Reactions
enthalpy of fusion	The amount of energy needed to change from a solid to a liquid or from a liquid to a solid	Phase Transitions: Melting, Boiling and Subliming
enthalpy of sublimation	The amount of energy needed to change from a solid to a gas or from a gas to a solid	Phase Transitions: Melting, Boiling and Subliming
enthalpy of vaporization	The amount of energy needed to change from a liquid to a gas or from a gas to a liquid	Phase Transitions: Melting, Boiling and Subliming
entropy	The level of randomness (or disorder) of a system, or a measure of the energy dispersal of the molecules in the system	Entropy and the Second Law of Thermodynamics
enzyme	Protein molecules which serve to catalyze biochemical reactions	Catalysis
enzyme-substrate complex	The binding of substrate to the enzymatic active site	Catalysis
equilibrium constant (Keq)	A numerical value that relates to the ratio of products and reactants at equilibrium	The Equilibrium Constant
equivalence point	The point of the reaction when all the analyte has been reacted with the titrant	Acid-Base Titrations
ester group	A functional group made by combining a carboxylic acid with an alcohol	Other Oxygen-Containing Functional Groups
ether group	A functional group that has an O atom attached to two organic groups	Other Oxygen-Containing Functional Groups
evaporation	The formation of a gas phase from a liquid at temperatures below the boiling point	Properties of Liquids
exact number	A number from a defined relationship that technically has an infinite number of significant figures	Converting Units
exothermic	A chemical reaction that has a negative change in enthalpy	Enthalpy and Chemical Reactions
expanded valence shell molecules	A molecule with more than eight electrons in the valence shell of an atom	Violations of the Octet Rule
experiment	A test of the natural universe to see if a guess (hypothesis) is correct	Chemistry as a Science
exponent	The raised number to the right of a 10 indicating the number of factors of 10 in the original number	Expressing Numbers
f block	The columns of the periodic table in which f subshells are being occupied	Electronic Structure and the Periodic Table
fission	The breaking apart of an atomic nucleus into smaller nuclei	Radioactivity
formation reaction	A chemical reaction that forms one mole of a substance from its constituent elements in their standard states	Formation Reactions
freezing point depression	The decrease of a solution’s freezing point because of the presence of solute	Colligative Properties of Solutions
freezing point depression constant (Kf)	The constant that relates the molality concentration of a solution and its freezing point change	Colligative Properties of Solutions
frequency	The number of cycles of light that pass a given point in one second	Light
frequency factor ( A )	A factor that takes into account the frequency of reactions and the likelihood of correct molecular orientation	Activation Energy and the Arrhenius Equation
frontier molecular orbitals	A term which refers to the HOMO and LUMO, the most likely orbitals to be involved in chemical reactions or processes	Molecular Orbitals
functional group	A collection of atoms or bonds with certain characteristic reactions	Alkyl halides and alcohols
fundamental units	One of the seven basic units of SI used in science	Expressing Units
gamma ray	A type of radioactive emission that is a very energetic form of electromagnetic radiation	Radioactivity
gas law	A simple mathematical formula that allows one to model, or predict, the behavior of a gas	Gas Laws
Gay-Lussac’s law	A gas law that relates pressure with absolute temperature	Other Gas Laws
Geiger counter	An electrical device that detects radioactivity	Units of Radioactivity
Gibbs free energy ( G )	A measure of spontaneity which incorporates both enthalpy and entropy	Gibbs Free Energy
Graham’s law of effusion	A law which relates the rate of effusion of a gas to the inverse of the square root of its molar mass	Molecular Effusion and Diffusion
gray (Gy)	A unit of radioactive exposure qual to 100 rad	Units of Radioactivity
half cell	A part of a voltaic cell that contains one half reaction	Applications of Redox Reactions: Voltaic Cells
half reaction	The individual oxidation or reduction reaction of a redox reaction	Balancing Redox Reactions
half reaction method	The method of balancing redox reactions by writing and balancing the individual half reactions	Balancing Redox Reactions
half-life	The amount of time it takes for one-half of a radioactive isotope to decay	Half-Life
half-life	The amount of time required for the concentration of a reactant to drop to one half of its initial concentration	Concentration-Time Relationships: Integrated Rate Laws
heat	The transfer of energy from one body to another due to a difference in temperature	Work and Heat
heating curve	A plot of the temperature versus the amount of heat added	Phase Transitions: Melting, Boiling and Subliming
Hess’s law	When chemical equations are combined algebraically, their enthalpies can be combined in exactly the same way	Hess’s Law
heterogeneous catalyst	A catalyst that is in a different phase from one or more of the reactants	Catalysis
heterogeneous equilibrium	An equilibrium in which more than one phase of reactants or products is present	The Equilibrium Constant
heterogeneous mixture	A non-uniform combination of more than one substance	Some Basic Definitions
HOMO	The highest occupied molecular orbital	Molecular Orbitals
homogeneous catalyst	A catalyst that is present in the same phase as the reactant molecules	Catalysis
homogeneous mixture	A uniform mixture of more than one substance that behaves as a single substance	Some Basic Definitions
Hund’s rule	One electron is placed in each degenerate orbital before pairing electrons in the same orbital	Organization of Electrons in Atoms
hybridization	A mathematical mixing of atomic orbitals	Valence Bond Theory and Hybrid Orbitals
hydrocarbons	An organic compound composed of carbon and hydrogen	Hydrocarbons
hydrogen bonding	The very strong interaction between molecules due to H atoms being bonded to N, O, or F atoms	Intermolecular Forces
hydrogenation reaction	The reaction of hydrogen across a C–C double or triple bond, usually in the presence of a catalyst	Hydrocarbons
hydronium ion	The actual chemical species that represents a hydrogen ion in aqueous solution	Arrhenius Acids and Bases
hypothesis	An educated guess about how the natural universe works	Chemistry as a Science
hyrolysis	A reaction with water	Brønsted-Lowry Acids and Bases
ICE chart	A table used to calculate equilibria values featuring rows of initial, change and equlibria concentration	Calculating Equilibrium Constant Values
ideal gas	A gas that conforms exactly to the tenets of the kinetic molecular theory	Real Gases
ideal gas law	A gas law that relates all four independent physical properties of a gas under any conditions	The Ideal Gas Law and Some Applications
indicator	A substance whose color change indicates the equivalence point of a titration	Acid-Base Titrations
initial rate	The instantaneous rate at the start of a reaction	Reaction Rates
initial rates method	A method to determine the rate law from the instantaneous reaction rate upon mixing the reactants	Rate Laws
instantaneous reaction rate	The rate of reaction at one instant in time	Reaction Rates
intermediate	A chemical species does not appear in the overall balanced equation and is generated in one elementary step but used up in a subsequent step	Reaction Mechanisms
ion	A species with an overall electric charge	Ions and Ionic Compounds
ionic compound	A compound formed from positive and negative ions	Ions and Ionic Compounds
ionic formula	The chemical formula for an ionic compound	Ions and Ionic Compounds
ionic solid	A crystalline solid composed of ions	Solids
ionization energy (IE)	The amount of energy required to remove an elec tron from an atom in the gas phase	Periodic Trends
isolated system	A system that does not allow a transfer of energy or matter into or out of the system	Energy
isomer	A molecule with the same molecular formula as another molecule but a different structure	Hydrocarbons
isothermal	A process that does not change the temperature	Phase Transitions: Melting, Boiling and Subliming
isotopes	Atoms of the same element that have different numbers of neutrons	Atomic Theory
joule	The SI unit of energy	Energy
Kelvin scale	The fundamental unit of temperature in SI	Other Units: Temperature and Density
ketone	A compound where the carbonyl carbon is attached to two carbon chains	Other Oxygen-Containing Functional Groups
kinetic energy	The energy due to motion	Kinetic-Molecular Theory of Gases
kinetic-molecular theory of gases	A model which helps us understand gases at the molecular level and their physical properties	Kinetic-Molecular Theory of Gases
kinetics	The study of reaction rate and the factors that can influence reaction rate	Introduction to Kinetics
law of conservation of energy	The total energy of an isolated system does not increase or decrease	Energy
law of mass action	The relationship of the amounts of reactants and products at equilibrium	The Equilibrium Constant
Le Chatelier’s principle	If an equilibrium is stressed, then the reaction shifts to reduce the stress	Shifting Equilibria: Le Chatelier’s Principle
Lewis diagram	A representation of the valence electrons of an atom that uses dots around the symbol of the element	Lewis Electron Dot Diagrams
limiting reagent	The reactant that runs out first for a given chemical reaction	Limiting Reagents
line spectrum	An image that contains only certain colors of light	Quantum Numbers for Electrons
locant	The numerical position of a substituent	Branched Hydrocarbons
lock and key model	A simple model used to describe enzyme activity, where substrates must fit into appropriately shaped active sites	Catalysis
lone electron pairs	A pair of electrons that does not make a covalent bond	Covalent Bonds
LUMO	The lowest unoccupied molecular orbital	Molecular Orbitals
magnetic quantum number (ml)	The index that determines the orientation of the electron’s spatial distribution	Quantum Numbers for Electrons
mass-mass calculation	A calculation in which you start with a given mass of a substance and calculate the mass of another substance involved in the chemical equation	Mole-Mass and Mass-Mass Calculations
matter	Anything that has mass and takes up space. is anything that has mass and takes up space	Some Basic Definitions
mean free path	The average distance traveled by a molecule between collisions	Molecular Effusion and Diffusion
melting	The process of a solid becoming a liquid	Phase Transitions: Melting, Boiling and Subliming
melting point	The characteristic temperature at which a solid becomes a liquid	Phase Transitions: Melting, Boiling and Subliming
meniscus	The curved surface a liquid makes as it approaches a solid barrier	Properties of Liquids
metal	An element that conducts electricity and heat well and is shiny, silvery, solid, ductile, and malleable	Some Basic Definitions
metallic solid	A solid with the characteristic properties of a metal	Solids
microstate ( W )	A term used to describe different possible arrangements of molecular position and kinetic energy, at a particular thermodynamic state	Entropy and the Second Law of Thermodynamics
millimeters of mercury (mmHg)	The amount of pressure exerted by a column of mercury exactly 1 mm high	Pressure
mixture	A physical combination of more than one substance	Some Basic Definitions
molality (m)	The number of moles of solute per kilogram of solvent	Quantitative Units of Concentration
molar mass	The mass of 1 mol of a substance in grams	The Mole
molar volume	The volume of exactly 1 mol of a gas; equal to 22.4 L at STP	The Ideal Gas Law and Some Applications
molarity (M)	The number of moles of solute divided by the number of liters of solution	Quantitative Units of Concentration
mole	The number of things equal to the number of atoms in exactly 12 g of carbon-12; equals 6.022×1023 things	The Mole
mole fraction	The ratio of the number of moles of a component in a mixture divided by the total number of moles in the sample	Gas Mixtures
mole fraction	The ratio of the number of moles of a component to the total number of moles in a system	Colligative Properties of Solutions
molecular formula	A formal listing of what and how many atoms are in a molecule	Molecules an Chemical Nomenclature
molecular geometry	how the atoms in a molecule are arranged	Molecular Shapes and Polarity
molecular mass	The sum of the masses of the atoms in a molecule	Masses of Atoms and Molecules
molecular orbital theory (MO theory)	A more sophisticated model of chemical bonding where new molecular orbitals are generated using a mathematical process called Linear Combination of Atomic Orbitals (LCAO)	Molecular Orbitals
molecular polarity	The vector sum of the individual bond dipoles	Molecular Shapes and Polarity
molecular solid	A crystalline solid whose components are covalently bonded molecules	Solids
molecularity	The total number of molecules that participate in the effective collision of the elementary step	Reaction Mechanisms
molecule	The smallest part of a substance that has the physical and chemical properties of that substance	Molecules an Chemical Nomenclature
mole-mass calculation	A calculation in which you start with a given number of moles of a substance and calculate the mass of another substance involved in the chemical equation, or vice versa	Mole-Mass and Mass-Mass Calculations
mole-mole calculation	A stoichiometry calculation when one starts with moles of one substance and convert to moles of another substance using the balanced chemical equation	The Mole in Chemical Reactions
monomer	The repeated unit of a polymer	Polymers
net ionic equation	A chemical equation with the spectator ions removed	Ionic Equations: A Closer Look
neutral salt	An ionic compound that does not affect the acidity of its aqueous solution	Strong and Weak Acids and Bases and Their Salts
neutralization reaction	The reaction of an acid with a base to produce water and a salt	Neutralization Reactions
neutralization reaction	The reaction of an acid and a base to produce water and a salt	Arrhenius Acids and Bases
neutron	A subatomic particle with no charge	Atomic Theory
node (nodal plane)	An area of zero electron density	Molecular Orbitals
nomenclature	The rules of naming in organic chemistry	Branched Hydrocarbons
nonmetal	An element that exists in various colors and phases, is brittle, and does not conduct electricity or heat well	Some Basic Definitions
nonpolar covalent bond	The equal sharing of electrons in a covalent bond	Other Aspects of Covalent Bonding
normal boiling point	The characteristic temperature at which a liquid becomes a gas when the surrounding pressure is exactly 1 atm	Phase Transitions: Melting, Boiling and Subliming
nuclear energy	The controlled harvesting of energy from fission reactions	Nuclear Energy
nuclear equation	A chemical equation that emphasizes changes in atomic nuclei	Radioactivity
nuclear model	The model of an atom that has the protons and neutrons in a central nucleus with the electrons in orbit about the nucleus	Atomic Theory
nucleus	The center of an atom that contains protons and neutrons	Atomic Theory
odd-electron molecules	A molecule with an odd number of electrons in the valence shell of an atom	Violations of the Octet Rule
orbital	The specific set of principal, angular momentum, and magnetic quantum numbers for an electron	Quantum Numbers for Electrons
osmosis	The tendency of solvent molecules to pass through a semipermeable membrane due to concentration differences	Colligative Properties of Solutions
osmotic pressure	The tendency of a solution to pass solvent through a semipermeable membrane due to concentration differences	Colligative Properties of Solutions
oxidation	The loss of one or more electrons by an atom; an increase in oxidation number	Oxidation-Reduction Reactions
oxidation	The loss of one or more electrons by an atom; an increase in oxidation number	Oxidation-Reduction Reactions
oxidation number	A number assigned to an atom that helps keep track of the number of electrons on the atom	Oxidation-Reduction Reactions
oxidation number	A number assigned to an atom that helps keep track of the number of electrons on the atom	Oxidation-Reduction Reactions
oxidation-reduction (redox) reactions	A chemical reaction that involves the transfer of electrons	Oxidation-Reduction Reactions
p block	The columns of the periodic table in which p subshells are being occupied	Electronic Structure and the Periodic Table
parent isotope	The reactant in a nuclear equation	Radioactivity
parts per billion (ppb)	Ratio of mass of solute to total mass of sample times 1,000,000,000	Quantitative Units of Concentration
parts per million (ppm)	Ratio of mass of solute to total mass of sample times 1,000,000	Quantitative Units of Concentration
parts per thousand (ppth)	Ratio of mass of solute to total mass of sample times 1,000	Quantitative Units of Concentration
Pauli exclusion principle	No two electrons in an atom can have the same set of four quantum numbers	Organization of Electrons in Atoms
percent yield	Actual yield divided by theoretical yield times 100% to give a percentage between 0% and 100%	Yields
percentage composition by mass (or mass percentage, % m/m)	Ratio of mass of solute to the total mass of a sample times 100	Quantitative Units of Concentration
periodic table	A chart of all the elements	Atomic Theory
periodic trends	The variation of properties versus position on the periodic table	Periodic Trends
pH	The negative logarithm of the hydrogen ion concentration	The pH Scale
pH scale	The range of values from 0 to 14 that describes the acidity or basicity of a solution	The pH Scale
phase	An important physical property that defines whether matter is a solid, liquid, gas or supercritical fluid	Some Basic Definitions
phase diagram	A graphical representation of the equilibrium relationships that exist between the phases of a substance under specified pressures and temperatures	Properties of Liquids
photon	The name of a discrete unit of light acting as a particle	Light
physical change	A change that occurs when a sample of matter changes one or more of its physical properties	Some Basic Definitions
physical property	A characteristic that describes matter as it exists	Some Basic Definitions
pi bond (π bond)	The sideways overlap of p orbitals, placing electron density on opposite sides of the inter-nuclear axis – a double or triple bond	Valence Bond Theory and Hybrid Orbitals
Planck’s constant	The proportionality constant between the frequency and the energy of light: 6.626 × 10−34 J·s	Light
pOH	The negative logarithm of the hydroxide ion concentration	The pH Scale
polar covalent bond	A covalent bond between different atoms that attract the shared electrons by different amounts and cause an imbalance of electron distribution	Other Aspects of Covalent Bonding
polarity	A measure of the unequal sharing of electrons which has resulted in a dipole moment	Other Aspects of Covalent Bonding
polyatomic ions	An ion that contains more than one atom	Ions and Ionic Compounds
polymer	A long molecule made of many repeating units	Polymers
polymerization	The process of making a polymer	Polymers
polyprotic acid	An acid capable of donating more than one H+ ion	Some Special Types of Equilibria
precipitate	A solid that falls out of solution in a precipitation reaction	Types of Chemical Reactions: Single- and Double-Displacement Reactions
precipitation reaction	A chemical reaction in which two ionic compounds are dissolved in water and form a new ionic compound that does not dissolve	Types of Chemical Reactions: Single- and Double-Displacement Reactions
prefix	A prefix used with a unit that refers to a multiple or fraction of a fundamental unit to make a more conveniently sized unit for a specific quantity	Expressing Units
pressure	Force per unit area	Pressure
primary battery	A battery that cannot be recharged	Applications of Redox Reactions: Voltaic Cells
principal quantum number (n)	The index that largely determines the energy of an electron in an atom	Quantum Numbers for Electrons
product	A final substance in a chemical equation	The Chemical Equation
proton	A subatomic particle with a positive charge	Atomic Theory
qualitative	A description of the quality of an object	Chemistry as a Science
quantitative	A description of a specific amount of something	Chemistry as a Science
quantization	When a quantity is restricted to having only certain values	Quantum Numbers for Electrons
quantum mechanics	The theory of electrons that treats them as a wave	Quantum Numbers for Electrons
quantum number	An index that corresponds to a property of an electron, like its energy	Quantum Numbers for Electrons
rad	A unit of radioactive exposure equal to 0.01 J/g of tissue	Units of Radioactivity
radioactive decay	The spontaneous change of a nucleus from one element to another	Radioactivity
radioactivity	Emanations of particles and radiation from atomic nuclei	Radioactivity
Raoult’s law	The mathematical formula for calculating the vapor pressure of a solution	Colligative Properties of Solutions
rate constant ( k )	A proportionality constant specific to each reaction at a particular temperature	Rate Laws
rate-determining step	The slowest step in a multistep mechanism	Reaction Mechanisms
rate law	A mathematical relationship between the reaction rate and the reactant concentrations	Rate Laws
reactant	An initial substance in a chemical equation	The Chemical Equation
reaction mechanism	The bond making and bond breaking steps which occur at the molecular level during a chemical reaction	Reaction Mechanisms
reaction order	The sum of the concentration term exponents in a rate law equation	Rate Laws
reaction rate	The speed of a chemical reaction	Introduction to Kinetics
real gases	A gas that deviates from ideal behaviour	Real Gases
redox reaction	A chemical reaction that involves the transfer of electrons	Oxidation-Reduction Reactions
reduction	The gain of one or more electrons by an atom; a decrease in oxidation number	Oxidation-Reduction Reactions
reduction	The gain of one or more electrons by an atom; a decrease in oxidation number	Oxidation-Reduction Reactions
rem	A unit of radioactive exposure that includes a factor to account for the type of radioactivity	Units of Radioactivity
ribozyme	Ribonucleic acid (RNA) molecules capable of catalyzing certain chemical reactions	Catalysis
root-mean-square (rms) speed (urms)	The speed of molecules having exactly the same kinetic energy as the average kinetic energy of the sample	Kinetic-Molecular Theory of Gases
s block	The columns of the periodic table in which s subshells are being occupied	Electronic Structure and the Periodic Table
salt	Any ionic compound that is formed from a reaction between an acid and a base	Neutralization Reactions
salt	Any ionic compound that is formed from a reaction between an acid and a base	Arrhenius Acids and Bases
salt bridge	A part of a voltaic cell that contains a solution of some ionic compound whose ions migrate to either side of the voltaic cell to maintain the charge balance	Applications of Redox Reactions: Voltaic Cells
saturated hydrocarbons	A carbon compound with the maximum possible number of H atoms in its formula	Hydrocarbons
saturated solution	A solution with the maximum amount of solute dissolved in it	Some Definitions
science	The process of knowing about the natural universe through observation and experiment	Chemistry as a Science
scientific law	A specific statement that is thought to be never violated by the entire natural universe	Chemistry as a Science
scientific notation	An expression of a number using powers of 10	Expressing Numbers
screening	The repelling valence electrons by core electrons	Periodic Trends
second law of thermodynamics	A spontaneous process will increase the entropy of the universe	Entropy and the Second Law of Thermodynamics
secondary battery	A battery that can be recharged	Applications of Redox Reactions: Voltaic Cells
semimetal	An element that has properties of both metals and nonmetals	Some Basic Definitions
semipermeable membrane	A thin membrane that will pass certain small molecules but not others	Colligative Properties of Solutions
SI unit	International System of Units used by all scientists, literally translated from “le Système International d’unités.”	Expressing Units
Sievert (Sv)	Sievert (Sv) is a related unit and is defined as 100 rem	Units of Radioactivity
sigma bond (σ bond)	Orbital overlap to form a bond which has cylindrical symmetry – a single bond	Valence Bond Theory and Hybrid Orbitals
significant figures	The limit of the number of places a measurement can be properly expressed with	Significant Figures
silicones	A polymer based on a silicon and oxygen backbone	Polymers
single bond	A covalent bond composed of one pair of electrons	Covalent Bonds
single-replacement reaction	A chemical reaction in which one element is substituted for another element in a compound	Types of Chemical Reactions: Single- and Double-Displacement Reactions
solidification	The process of a liquid becoming a solid	Phase Transitions: Melting, Boiling and Subliming
solubility	The maximum amount of a solute that can be dissolved in a given amount of a solvent	Some Definitions
solubility rules	General statements that predict which ionic compounds dissolve and which do not	Types of Chemical Reactions: Single- and Double-Displacement Reactions
solute	The minor component of a solution	Some Definitions
solution	See homogeneous mixture	Some Basic Definitions
solvent	The major component of a solution	Some Definitions
specific heat capacity	The proportionality constant between heat, mass, and temperature change; also called specific heat	Work and Heat
spectator ion	An ion that does nothing in the overall course of a chemical reaction	Ionic Equations: A Closer Look
spin quantum number (ms)	The index that indicates one of two spin states for an electron	Quantum Numbers for Electrons
spontaneous process	A process that occurs without the influence of external forces or a change that moves a system towards equilibrium	Spontaneous Change
standard molar entropy (So)	The entropy of 1 mole of a substance in its standard state, at 1 atm of pressure	Measuring Entropy and Entropy Changes
standard notation	A straightforward expression of a number	Expressing Numbers
standard temperature and pressure (STP)	A set of benchmark conditions used to compare other properties of gases; 100 kPa for pressure and 273 K for temperature	The Ideal Gas Law and Some Applications
stoichiometry	The relating of one chemical substance to another using a balanced chemical reaction	Stoichiometry
strong acid	Any acid that is 100% dissociated into ions in aqueous solution	Strong and Weak Acids and Bases and Their Salts
strong base	Any base that is 100% dissociated into ions in aqueous solution	Strong and Weak Acids and Bases and Their Salts
sublimation	The process of a solid becoming a gas	Phase Transitions: Melting, Boiling and Subliming
subshell	A term used to describe electrons in a shell that have the same angular momentum quantum number	Quantum Numbers for Electrons
substance	Matter that has the same physical and chemical properties throughout.	Some Basic Definitions
substituent	A branch off a main chain in a hydrocarbon	Branched Hydrocarbons
substrate	The reactants which are specific for a biological catalyst	Catalysis
supercritical fluid	A phase beyond the critical point, where liquid and gas phases are no longer distinct	Properties of Liquids
supersaturated solution	A unstable solution with more than the normal maximum amount of solute in it	Some Definitions
surface tension	An effect caused by an imbalance of forces on the atoms at the surface of a liquid	Properties of Liquids
surrounding atoms	An atom that makes covalent bonds to the central atom(s)	Covalent Bonds
system	The part of the universe under study	Energy
temperature	A measure of the average amount of kinetic energy a system contains	Other Units: Temperature and Density
theoretical yield	An amount that is theoretically produced as calculated using the balanced chemical reaction	Yields
theory	A general statement that explains a large number of observations	Chemistry as a Science
thermochemical equation	A chemical equation that includes an enthalpy change	Enthalpy and Chemical Reactions
thiol	The sulfur analog of an alcohol	Other Functional Groups
third law of thermodynamics	At absolute zero the entropy of a pure, perfect crystal is zero	Measuring Entropy and Entropy Changes
titrant	The reagent of known concentration	Acid-Base Titrations
titration	A chemical reaction performed quantitatively to determine the exact amount of a reagent	Acid-Base Titrations
torr	Another name for a millimeter of mercury	Pressure
tracer	A substance that can be used to follow the pathway of that substance through a structure	Uses of Radioactive Isotopes
transition state	The highest energy transitional point in the elementary step	Reaction Mechanisms
triple bond	A covalent bond composed of three pairs of bonding electrons	Covalent Bonds
unsaturated hydrocarbons	A carbon compound with less than the maximum possible number of H atoms in its formula	Hydrocarbons
unsaturated solution	A solution with less than the maximum amount of solute dissolved in it	Some Definitions
valence electrons	The electrons in the highest-numbered shell, plus any electrons in the last unfilled subshell. The electrons most likely involved in chemical reactions	Electronic Structure and the Periodic Table
valence shell	The highest-numbered shell in an atom that contains electrons	Electronic Structure and the Periodic Table
valence shell electron pair repulsion theory (VSEPR)	The general concept that estimates the shape of a simple molecule: electron pairs repel each other to get as far away from each other as possible	Molecular Shapes and Polarity
van der Waal’s equation	An equation which compensates for deviations from ideal gas behaviour, correcting for intermolecular forces and the volume of gas molecules	Real Gases
van’t Hoff factor (i)	The number of particles each solute formula unit breaks apart into when it dissolves	Colligative Properties of Ionic Solutes
vapor	Material in the gas phase due to evaporation	Properties of Liquids
vapor pressure	The partial pressure exerted by evaporation of a liquid	Gas Mixtures
vapor pressure depression	The decrease of a solution’s vapor pressure because of the presence of a solute	Colligative Properties of Solutions
vector quantity	A quantity which has both a magnitude and direction	Molecular Shapes and Polarity
voltaic (galvanic) cell	An apparatus that allows for useful electrical work to be extracted from a redox reaction.	Applications of Redox Reactions: Voltaic Cells
wavelength	The distance between corresponding points in two adjacent light cycles	Light
weak acid	Any acid that is less than 100% dissociated into ions in aqueous solution	Strong and Weak Acids and Bases and Their Salts
weak base	Any base that is less than 100% dissociated into ions in aqueous solution	Strong and Weak Acids and Bases and Their Salts

7

Versioning History

Introductory Chemistry: 1st Canadian NSCC edition is an adapted version of Introductory Chemistry: 1st Canadian Edition by
David W. Ball and Jessie A. Key.

The current NSCC Pressbooks Edition was last modified in January 2021.

NSCC Edition — Chapter Mapping
The NSCC edition adds instructional units with a reordering of chapters from the original open textbook.

Unit	NSCC Unit Title	Key and Bell Chapters used	Learning Outcomes for ALP
1	Introduction to Chemistry	1, 2	1, 2, 5
2	Atoms, Molecules and Ions	3, 8	1, 2, 3, 4, 5, 6
3	Reactions and Equations	4	7, 8, 9
4	Stoichiometry	5	18, 19, 20, 21
5	Gases	6	20, 21, 23
6	Energy and Thermodynamics	7, 18	32, 33
7	Chemical Bonds	9	30, 31
8	Solids, Liquids and Solutions	10, 11	22, 26, 27
9	Acids and Bases	12	6, 14, 24, 25
10	Equilibrium	13, 17	8, 9
11	Oxidation and Reduction	14	10, 11, 12, 13, 14, 15, 16, 17
12	Organic Chemistry	16	28, 29

January 2021

Deleted Nuclear Chemistry in Unit 7.

Renamed Unit 2 to match NSCC course outline – Unit 2 Foundations of Chemistry.

Sections that were out of order were adjusted so the sequencing is in order and logical.

BC Campus Changes

This page provides a record of edits and changes made to this book since its initial publication in the B.C. Open Textbook Collection. Whenever edits or updates are made, we make the required changes in the text and provide a record and description of those changes here. If the change is minor, the version number increases by 0.1. However, if the edits involve substantial updates, the version number goes up to the next full number. The files on our website always reflect the most recent version, including the print-on-demand copy.

If you find an error in this book, please fill out the Report an Open Textbook Error form. We will contact the author, make the necessary changes, and replace all file types as soon as possible. Once we have updated the files, this Versioning History page will be updated to reflect the edits made.

Version	Date	Change	Details
1.1	September 15, 2014	Book added to the BC Open Textbook Collection.
1.2	September 17/15	Typos in the Conversion of Units section (pp 52-60). Division sign missing in all examples in the PDF of text.	Corrections made.
1.3	May 15, 2017	Links to videos updated. New file types added: digital .pdf and .odt files.	The updated videos are: Chapter 1: Some Basic Definitions – “The Chemical World” Chapter 2: Significant Figures – “Significant Figures” Chapter 2: Converting Units – “Unit Conversion” Chapter 5: Stoichiometry – “Stoichiometry” Chapter 6: Molecular Effusion and Diffusion – “Diffusion” Chapter 12: Acid-Base Titrations – “Titrations”
1.4	January 30, 2019	Error fixes and updated metadata.	Chapter: Hydrocarbons Image showing the Lewis structure for but-2-yne: Removed the two hydrogen atoms from the third carbon atom. Chapter: Branched Hydrocarbons A molecule was incorrectly labelled as 3-phenylheptane. It was corrected to 4-phenylheptane. The label of the image in Answer 17 was corrected to say “3-methylheptane” Metadata Updated copyright information and metadata based on BCcampus standards and Pressbooks updates. Edited the About the book chapter to provide up-to-date information.
1.5	August, 2019	Modified Textbook	New sections created for organizing content. Chapters reordered into new units to match NSCC delivery.

Known Issues

In the PDF files for this book, there are a few symbols that do not display properly and are replaced with a question mark (?). This is a known issue, and we are working on getting it fixed. Below is a list of these characters and their locations:

PDF page number	What it looks like	What it should look like
220	2 c pancake mix ? 1 egg ? 1/2 cup milk
253	2 mol of C 2 H 6 ? 7 mol of O 2 ? 4 mol of CO 2 ? 6 mol of H 2 O
362	C 5 H 12 + ? 2 → 5CO 2 + 6H 2 O; 4.4 mol	C 5 H 12 + O8 2 → 5CO 2 + 6H 2 O; 4.4 mol
620	q?m × ΔT
688	HC2H3O2 ? H+(aq) + C2H3O2−(aq)	HC2H3O2 H+(aq) + C2H3O2−(aq)
759	H2(g) + Cl2(g) ? 2HCl(g)	H2(g) + Cl2(g) 2HCl(g)
910	C4H9Br ? C4H9+ + Br– C4H9+ + H2O ? C4H8 + H3O+	C4H9Br C4H9+ + Br– C4H9+ + H2O C4H8 + H3O+
937	ΔS? = ∑nS?(products) – ∑mS?(reactants)
948	ΔG?